Send ESP-NOW accel only on deadzone change and harden BLE+WiFi OTA coex.

Quiet pods no longer spam 100 Hz samples; mute wifi logs and throttle BLE
notifies during slave distribution so the wifi task stack does not panic.

Co-authored-by: Cursor <cursoragent@cursor.com>

Makefile

@@ -19,8 +19,8 @@ default:
 	@echo "Set PORT=$(PORT) (current) for goTool targets."
 
 proto_generate_espnow:
-	cd main/proto && python ../../libs/nanopb/generator/nanopb_generator.py \
-		-I ../../libs/nanopb/generator/proto esp_now_messages.proto
+	cd main/proto && python3 ../../libs/nanopb/generator/nanopb_generator.py \
+		-I . -I ../../libs/nanopb/generator/proto esp_now_messages.proto
 
 proto_generate: proto_generate_uart proto_generate_espnow
 

docs/ARCHITECTURE.md

@@ -0,0 +1,422 @@
+# Powerpod — Architektur-Spezifikation
+
+Dieses Dokument beschreibt die Firmware-Architektur des ESP32-S3-Projekts: Rollen, Schichten, Datenflüsse und die wichtigsten Implementierungsstellen. **goTool** (Host-CLI) ist bewusst ausgeschlossen — es nutzt nur das UART-Protokoll des Masters.
+
+---
+
+## 1. Systemüberblick
+
+Master und Slave laufen mit **demselben Binary**. Die Rolle wird beim Boot per DIP-Schalter und I2C-IO-Expander festgelegt; danach verzweigt die Initialisierung.
+
+```mermaid
+flowchart TB
+  subgraph host["Externer Host (UART)"]
+    PC[PC / beliebiger UART-Client]
+  end
+
+  subgraph master["Master ESP32-S3"]
+    UART_RX[uart_read_task]
+    Q[cmd_queue]
+    DISP[vCmdDispatcherTask]
+    HAND[cmd/*.c Handler]
+    REG[client_registry]
+    ENOW_M[esp_now_comm Master]
+  end
+
+  subgraph slaves["Slave ESP32-S3 × N"]
+    ENOW_S[esp_now_comm Slave]
+    BMA[BMA456 + LED Ring]
+  end
+
+  PC <-->|UART1 921600 framed + protobuf| UART_RX
+  UART_RX --> Q --> DISP --> HAND
+  HAND --> REG
+  HAND --> ENOW_M
+  ENOW_M <-->|ESP-NOW nanopb| ENOW_S
+  ENOW_S --> BMA
+  ENOW_S -->|Accel/Tap/Battery| ENOW_M
+  ENOW_M --> REG
+```
+
+| Rolle | UART | ESP-NOW | Zentrale Datenhaltung |
+|-------|------|---------|------------------------|
+| **Master** | Ja — einziger Befehlseingang von außen | Discover (Broadcast), Unicast zu Slaves | `client_registry.c` |
+| **Slave** | Nein | Antwort auf Discover, Heartbeat, Events zum Master | `esp_now_slave.c` |
+
+**Einstieg:** `main/powerpod.c` → `app_main()`.
+
+---
+
+## 2. Boot und Konfiguration
+
+### 2.1 Ablauf
+
+```mermaid
+sequenceDiagram
+  participant AM as app_main
+  participant NVS as pod_settings
+  participant I2C as I2C / IO-Expander
+  participant BMA as bosch456
+  participant EN as esp_now_comm
+  participant LR as led_ring
+  participant BI as board_input
+  participant CMD as cmd_handler + uart
+
+  AM->>NVS: pod_settings_init()
+  AM->>AM: GPIO DIP_MASTER → master/slave
+  AM->>I2C: Bus + Expander 0x20 → network 1–8
+  AM->>BMA: init_bma456() (Master + Slave)
+  AM->>AM: app_config_t füllen
+  AM->>BI: board_input_init()
+  AM->>EN: esp_now_comm_init(&app_config)
+  AM->>LR: led_ring_init()
+  alt master == true
+    AM->>CMD: Queue, Dispatcher, UART, Handler registrieren
+  end
+```
+
+### 2.2 `app_config_t`
+
+| Feld | Quelle | Bedeutung |
+|------|--------|-----------|
+| `master` | `DIP_MASTER` (GPIO 4): Low = Master | Steuert Host-Transport + Registry |
+| `network` | IO-Expander 8er-DIP-Bank, High-Nibble PCB-reversed; DIP1–7 one-hot | 1–7 → WiFi/ESP-NOW-Kanal |
+| `host_ble` | Expander DIP8 (nach Reverse+Invert) | `false`=UART, `true`=BLE (Boot only) |
+| `running_partition` | `esp_ota_get_running_partition()` | Aktives OTA-Label (`ota_0` / `ota_1`) |
+
+**Dateien:** `main/app_config.h`, `main/powerpod.c`, `main/powerpod.h` (Pins).
+
+---
+
+## 3. Schichtenmodell
+
+```
+┌─────────────────────────────────────────────────────────────┐
+│  Befehlshandler (main/cmd/cmd_*.c)                          │
+│  Decode/Encode: uart_cmd.c, Antwort: uart_proto.c           │
+├─────────────────────────────────────────────────────────────┤
+│  Dispatch: cmd_handler.c (Queue + vCmdDispatcherTask)       │
+├─────────────────────────────────────────────────────────────┤
+│  Host transport: uart.c / ble_host.c (Framing via host_transport) │
+│  ESP-NOW: esp_now_comm                                              │
+├─────────────────────────────────────────────────────────────┤
+│  Protokoll: uart_messages.proto    │  esp_now_messages.proto │
+│  Codec: nanopb (proto/*.pb.c)      │  esp_now_proto.c        │
+├─────────────────────────────────────────────────────────────┤
+│  Domäne: client_registry, bosch456, led_ring, ota_*, board  │
+├─────────────────────────────────────────────────────────────┤
+│  ESP-IDF: UART, NimBLE, WiFi, ESP-NOW, I2C, ADC, OTA, NVS   │
+└─────────────────────────────────────────────────────────────┘
+```
+
+**Host UART vs BLE:** Nur einer aktiv (DIP8). Gleiches Framing (`0xAA`…`0xCC`) und dieselbe `cmd_queue`. BLE: NUS-ähnliche GATT-Char, Write=RX, Notify=TX; Frames größer als ATT MTU-3 werden in aufeinanderfolgende Notifies gestückelt (Host-Parser reassembliert). `gotool serve` verbindet UART oder BLE über Dashboard/REST/WS (`managedHost`); **OTA** über UART oder BLE (ATT MTU ≥ ~219, preferred 517). Bei BLE-Host und aktivem Accel-Stream pusht `ble_stream` periodisch `BLE_STREAM_TICK` (10–16 ms, Default 10; pausiert während OTA) mit `esp_timestamp_us` (Live-Pfad bevorzugt Tick statt CACHE_STATUS-Poll).
+
+
+---
+
+## 4. Datenfluss: Commands (Befehle)
+
+Commands sind **asynchron über eine FreeRTOS-Queue** entkoppelt; der UART-Reader blockiert nicht auf Handler-Logik.
+
+### 4.1 Eingang (UART → Handler)
+
+```mermaid
+flowchart LR
+  A[Bytes UART1] --> B[parse_uart_byte]
+  B --> C{Frame vollständig?}
+  C -->|ja| D[uart_enqueue_packet]
+  D --> E["generic_msg_t<br/>msg_id = payload[0]<br/>payload = Rest"]
+  E --> F[cmd_queue xQueueSend]
+  F --> G[vCmdDispatcherTask]
+  G --> H{msg_register_handler}
+  H --> I[cmd_*.c callback]
+  I --> J[free payload]
+```
+
+**Wichtige Stellen:**
+
+| Schritt | Datei | Funktion |
+|---------|--------|----------|
+| Byte-Parser + Timeout 50 ms | `main/uart.c` | `parse_uart_byte()`, `uart_read_task()` |
+| Queue-Eintrag | `main/uart.c` | `uart_enqueue_packet()` |
+| Dispatcher | `main/cmd/cmd_handler.c` | `vCmdDispatcherTask()`, `msg_register_handler()` |
+| Registrierung Master | `main/powerpod.c` | `cmd_*_register()` nach `init_uart()` |
+
+**Nachrichten-ID:** Byte 0 des UART-Payloads = `alox_MessageType` (siehe `main/proto/uart_messages.proto`). Bytes 1… = nanopb-kodiertes `UartMessage` **ohne** wiederholtes Type-Feld — Handler erhalten nur den protobuf-Teil (`msg.payload` ab Offset 1).
+
+### 4.2 Ausgang (Handler → UART)
+
+```mermaid
+flowchart LR
+  H[Handler baut alox_UartMessage] --> U[uart_cmd_send]
+  U --> P[uart_send_uart_message]
+  P --> E[pb_encode + Byte0 = type]
+  E --> F[uart_send_framed]
+  F --> W[uart_write_bytes]
+```
+
+**Wichtige Stellen:**
+
+| Schritt | Datei | Funktion |
+|---------|--------|----------|
+| Handler-Hilfen | `main/uart_cmd.c` | `uart_cmd_decode()`, `uart_cmd_init_response()`, `uart_cmd_send()` |
+| Protobuf + Framing | `main/uart_proto.c` | `uart_send_uart_message()` |
+| XOR-Rahmen | `main/uart.c` | `uart_send_framed()` |
+
+### 4.3 OTA-Sperre (keine parallelen Befehle)
+
+Während einer OTA-Session (`ota_uart_is_active()` oder `ota_espnow_distribution_active()`) lehnt der Dispatcher alle UART-Befehle ab **außer**:
+
+- `OTA_START`, `OTA_PAYLOAD`, `OTA_END`, `OTA_START_ESPNOW`, `OTA_SLAVE_PROGRESS`
+
+Implementierung: `ota_session.c`, Prüfung in `vCmdDispatcherTask` vor Handler-Aufruf.
+
+Auf dem **Slave** verarbeitet `espnow_recv_cb` während `ota_uart_is_active()` nur noch OTA-Nachrichten vom joined Master (kein Discover, Stream, LED, …).
+
+Auf dem **Master** während ESP-NOW-Verteilung nur noch `ESPNOW_OTA_STATUS` aus dem recv_cb.
+
+### 4.4 UART-Request-Decode (strikt)
+
+| Regel | Beispiele |
+|-------|-----------|
+| Leerer protobuf-Body (`len == 0`) erlaubt | `VERSION`, `CLIENT_INFO`, `CACHE_STATUS`, `BATTERY_STATUS` (Defaults) |
+| `len > 0` → Decode muss gelingen, `which_payload` muss passen | `ACCEL_STREAM`, `TAP_NOTIFY`, `RESTART`, OTA, … |
+
+### 4.5 Bridge-Muster: UART-Befehl → ESP-NOW
+
+Viele Master-Handler folgen demselben Muster:
+
+1. `uart_cmd_decode()` → Request aus `UartMessage`
+2. Lokale Aktion und/oder `client_registry_*` aktualisieren
+3. `esp_now_comm_send_*()` mit MAC aus Registry
+4. `uart_cmd_send()` mit Response
+
+```mermaid
+sequenceDiagram
+  participant Host
+  participant UART as uart.c
+  participant CMD as cmd_accel_deadzone.c
+  participant REG as client_registry
+  participant EN as esp_now_comm.c
+  participant SL as Slave
+
+  Host->>UART: Frame ACCEL_DEADZONE
+  UART->>CMD: generic_msg_t
+  CMD->>REG: set_accel_deadzone / lookup MAC
+  CMD->>EN: esp_now_comm_send_accel_deadzone
+  EN->>SL: ESPNOW_SET_ACCEL_DEADZONE
+  SL->>SL: bma456 + NVS
+  CMD->>Host: uart_cmd_send Response
+```
+
+**Beispiel-Implementierung:** `main/cmd/cmd_accel_deadzone.c`  
+**Weitere Bridge-Handler:** `cmd_accel_stream.c`, `cmd_tap_notify.c`, `cmd_led_ring.c`, `cmd_espnow_find_me.c`, `cmd_restart.c`, `cmd_espnow_unicast_test.c`, `cmd_espnow_echo_ping.c`, `cmd/cmd_ota.c` (OTA + `ota_espnow.c`).
+
+**Nur Master / nur Cache (kein Slave-Roundtrip):** `cmd_client_info.c`, `cmd_battery.c`, `cmd_cache_status.c`, `cmd_version.c`, `cmd_set_log_level.c`.
+
+---
+
+## 5. Datenfluss: UART
+
+### 5.1 Rahmenformat (Transport)
+
+Unabhängig von Protobuf — reines Bytestream-Framing:
+
+| Feld | Wert |
+|------|------|
+| Start | `0xAA` |
+| Länge | 2 Bytes little-endian (1–1024) |
+| Payload | `length` Bytes |
+| Prüfsumme | XOR aller Payload-Bytes |
+| Stopp | `0xCC` |
+
+**Parameter:** `main/uart.h` — `UART_NUM_1`, `921600` Baud, TX GPIO **2**, RX GPIO **3**, `MAX_PAYLOAD_SIZE` 1024.
+
+### 5.2 Nutzlast (Anwendung)
+
+```
+Payload[0]     = MessageType (enum, 1 Byte)
+Payload[1…]    = nanopb UartMessage (Felder ab type/payload oneof)
+```
+
+**Schema:** `main/proto/uart_messages.proto`  
+**Generiert:** `main/proto/uart_messages.pb.c/h` (`make proto_generate_uart`)
+
+### 5.3 Tasks und Prioritäten
+
+| Task | Stack | Priorität | Datei |
+|------|-------|-----------|--------|
+| `uart_rx` | 4096 | 5 | `uart.c` |
+| `cmd_dispatch` | 8192 | 5 | `cmd_handler.c` |
+
+Queue-Größe Master: **64** Einträge (`powerpod.c`); volle Queue → Warnung, Payload wird freigegeben.
+
+---
+
+## 6. Datenfluss: ESP-NOW
+
+### 6.1 Stack-Initialisierung
+
+`esp_now_comm_init()` (`esp_now_comm.c`) → `esp_now_core` (WiFi/Radio/Send) + Rolle:
+
+1. `client_registry_init()` (Master)
+2. `esp_now_init()`, recv_cb leitet an `esp_now_master_on_recv` / `esp_now_slave_on_recv`
+3. **Master** (`esp_now_master.c`): `espnow_disc`, `espnow_mon`
+4. **Slave** (`esp_now_slave.c`): `espnow_stx`, `espnow_hb`, `espnow_accel`, `ota_slave_work`
+
+**Codec:** Rohes Paket = ein nanopb `EspNowMessage` — **kein** zusätzliches Framing (`main/esp_now_proto.c`).
+
+### 6.2 Discovery und Join (Slave)
+
+```mermaid
+sequenceDiagram
+  participant M as Master espnow_disc
+  participant S as Slave recv_cb
+  participant TX as slave_tx_task
+
+  loop alle 500 ms
+    M->>M: ESPNOW_DISCOVER → FF:FF:…:FF
+  end
+  S->>S: handle_discover (network match)
+  S->>S: s_slave_joined, s_master_mac
+  Note over S,TX: Kein Send aus recv_cb!
+  S->>TX: SLAVE_TX_SLAVE_INFO
+  TX->>M: ESPNOW_SLAVE_INFO
+  S->>TX: SLAVE_TX_BATTERY
+  TX->>M: ESPNOW_BATTERY_REPORT
+  loop alle 1 s
+    S->>M: ESPNOW_HEARTBEAT
+  end
+```
+
+**Registry-Schlüssel:** immer `recv_info.src_addr` (WiFi-MAC des Senders), **nicht** optionales `mac`-Feld in der Protobuf-Nachricht.
+
+**Slave-ID:** `mac[5]` (letztes Oktett) — kann kollidieren; eindeutig ist die volle MAC in der Registry.
+
+**Master-Verlust:** Slave setzt Join zurück, wenn **5 s** kein Discover vom gleichen Master (`SLAVE_MASTER_LOST_MS`).
+
+**Join-Policy:** Master→Slave-Steuerung (Stream, Tap, LED, OTA, `UNICAST_TEST`, `SET_ACCEL_DEADZONE`, …) nur bei `s_slave_joined` und `src_addr == s_master_mac`. Während `ota_uart_is_active()` auf dem Slave verarbeitet der recv_cb nur OTA vom joined Master.
+
+**Slave OTA:** Payload/End/Status-Sends laufen über `ota_slave_work_task` (Queue), nicht im ESP-NOW-recv_cb.
+
+### 6.3 Master → Slave (Unicast)
+
+Alle Master-Sends laufen über `send_message()` / `send_message_ex()`:
+
+1. `esp_now_proto_encode()`
+2. `ensure_peer(dest_mac)`
+3. `esp_now_send()`
+
+Öffentliche API: `main/esp_now_comm.h` (`esp_now_comm_send_*`).
+
+**Empfang Slave:** `espnow_recv_cb()` → Switch auf `which_payload` → Handler (`handle_slave_*`).
+
+### 6.4 Slave → Master (Events)
+
+| Nachricht | Task / Trigger | Master-Ziel |
+|-----------|----------------|-------------|
+| `ESPNOW_ACCEL_SAMPLE` | `accel_stream_task` poll 10 ms + deadzone (nur bei Änderung), 1 ms slots via Discover `master_time_us` | `client_registry_update_accel()` |
+| `ESPNOW_TAP_EVENT` | BMA456-IRQ → `on_bma456_tap` | `client_registry_update_tap()` |
+| `ESPNOW_BATTERY_REPORT` | Heartbeat + nach Join | `client_registry_update_battery()` |
+| `ESPNOW_SLAVE_INFO` / `HEARTBEAT` | `slave_tx_task` / Heartbeat-Task | `client_registry_heartbeat()` |
+| `ESPNOW_OTA_STATUS` | `ota_espnow_slave_*` | `ota_espnow_master_on_status()` |
+
+**Master recv:** `espnow_recv_cb()` — Presence, Accel, Tap, Battery, OTA-Status.
+
+### 6.5 OTA über ESP-NOW
+
+Nach erfolgreichem UART-OTA auf dem Master (oder `OTA_START_ESPNOW`): `ota_espnow.c` liest gestagte Partition, sendet `OTA_START` / `PAYLOAD` (≤200 B, `send_message_ex` mit ACK-Semaphore) / `OTA_END` an alle **available** Slaves. Anschließend Reboot; Bootloader führt neues Image als `PENDING_VERIFY`, `ota_confirm` bestätigt nach stabilem Boot.
+
+Gemeinsamer Flash-Puffer: `ota_uart.c` (4 KiB Blockgröße).
+
+---
+
+## 7. Client Registry (Master-Datenhub)
+
+Die Registry ist die **zentrale Brücke** zwischen ESP-NOW-Echtzeitdaten und UART-Abfragen.
+
+```mermaid
+flowchart TB
+  EN_RX[espnow_recv_cb] --> REG[client_registry]
+  CMD_R[cmd_client_info / battery / cache_status] --> REG
+  CMD_W[cmd_* write paths] --> REG
+  REG --> CMD_R
+  EN_TX[esp_now_comm_send_*] --> MAC[MAC aus Registry]
+```
+
+| Daten | Aktualisiert durch | Gelesen durch UART |
+|-------|-------------------|-------------------|
+| Presence, Version | HEARTBEAT / SLAVE_INFO | `CLIENT_INFO` |
+| Accel-Stream-Samples | `ESPNOW_ACCEL_SAMPLE` | `CACHE_STATUS` |
+| Tap-Events (10 ms Cache) | `ESPNOW_TAP_EVENT` | `CACHE_STATUS` |
+| Batterie | `ESPNOW_BATTERY_REPORT` + Master-ADC | `BATTERY_STATUS` |
+| Konfig-Flags | Handler + ESP-NOW | `CLIENT_INFO`, diverse GET |
+
+**Datei:** `main/client_registry.c`, `main/client_registry.h` (max. 16 Clients, Timeout 3 s ohne Heartbeat).
+
+---
+
+## 8. FreeRTOS-Tasks (Übersicht)
+
+| Task | Rolle | Intervall / Trigger |
+|------|-------|---------------------|
+| `uart_rx` | Master | UART read 20 ms timeout |
+| `cmd_dispatch` | Master | Queue blocking |
+| `espnow_disc` | Master | 500 ms Discover |
+| `espnow_mon` | Master | 1 s Timeout + Master-Battery |
+| `espnow_stx` | Slave | Queue: SLAVE_INFO, Battery nach Join |
+| `espnow_hb` | Slave | 1 s Heartbeat + 30 s Battery |
+| `espnow_accel` | Slave | Accel poll 10 ms / TX bei Deadzone-Änderung, ID-Slot 1 ms wenn Stream an |
+| `bma456_poll` | Beide | 10 Hz (`bosch456.c`) |
+| `vTaskLedRing` | Beide | LED-Ring-Befehle |
+
+`app_main` endet in `while(1) vTaskDelay(portMAX_DELAY)` — alle Arbeit läuft in Tasks.
+
+---
+
+## 9. Implementierungskarte (wichtige Dateien)
+
+| Bereich | Pfad | Verantwortung |
+|---------|------|----------------|
+| Einstieg / Init | `main/powerpod.c` | Boot-Reihenfolge, Master-Handler-Register |
+| UART Transport | `main/uart.c`, `main/uart.h` | Framing RX/TX |
+| UART Protobuf TX | `main/uart_proto.c` | `uart_send_uart_message` |
+| UART Handler-Boilerplate | `main/uart_cmd.c`, `main/uart_cmd.h` | Decode, Register, Send |
+| Command Dispatch | `main/cmd/cmd_handler.c` | Queue, Dispatcher |
+| UART Commands | `main/cmd/cmd_*.c` | Pro Befehl ein Modul |
+| ESP-NOW | `esp_now_comm.c` Init/Router; `esp_now_core.c` Send/Peer; `esp_now_master.c` / `esp_now_slave.c` Rollenlogik |
+| ESP-NOW Codec | `main/esp_now_proto.c` | nanopb encode/decode |
+| Registry | `main/client_registry.c` | Slave-Tabelle + Caches |
+| BMA456 | `main/bosch456.c` | Sensor, Tap, Deadzone-Filter |
+| LED | `main/led_ring.c` | 95 LEDs, Digit-Maps |
+| OTA UART | `main/ota_uart.c`, `cmd/cmd_ota.c` | A/B-Partition Upload |
+| OTA ESP-NOW | `main/ota_espnow.c` | Verteilung an Slaves |
+| OTA Confirm | `main/ota_confirm.c` | Nach ~8 s `mark_app_valid` (Rollback) |
+| Einstellungen NVS | `main/pod_settings.c` | Accel-Deadzone persistent |
+| Board | `main/board_input.c` | Taster, LiPo-ADC |
+| Protobuf Schemas | `main/proto/*.proto` | Vertrag UART / ESP-NOW |
+| Vendor BMA456 | `components/bma456/` | Nur `bma4.c` + `bma456h.c` gelinkt |
+
+---
+
+## 10. Protokoll-Verträge (Kurzreferenz)
+
+- **UART:** `main/proto/uart_messages.proto` — Host ↔ Master  
+- **ESP-NOW:** `main/proto/esp_now_messages.proto` — Master ↔ Slave  
+
+Regenerierung: `make proto_generate` (siehe `DOCUMENTATION.md`).
+
+---
+
+## 11. Design-Entscheidungen
+
+1. **Eine Queue für UART-Commands** — einziger Eingang vom Host; während OTA nur OTA-Befehle.  
+2. **Kein ESP-NOW-Send im `recv_cb`** — Slave antwortet auf Discover über `slave_tx_task` (Deadlock-/Stack-Risiko vermeiden).  
+3. **Registry-MAC = ESP-NOW-Quelladresse** — Protobuf-MAC ist optional/informativ.  
+4. **Gleiches Binary** — Konfiguration nur Hardware (DIP + Expander); reduziert Release-Komplexität.  
+5. **Nanopb statt vollem protobuf-c** — passend für ESP-RAM/Flash.  
+6. **Master aggregiert Sensor-Daten** — Slaves streamen; Host pollt Cache per UART (`CACHE_STATUS`), kein Durchreichen jedes Accel-Samples über UART.
+
+---
+
+Weitere Details (Befehlsliste, GPIO, Build, BMA456): [`DOCUMENTATION.md`](DOCUMENTATION.md).

docs/DOCUMENTATION.md

@@ -0,0 +1,583 @@
+# Powerpod ESP-Firmware — Dokumentation
+
+Vollständige Referenz für das ESP-IDF-Projekt unter `main/` und `components/`. Diese Doku beschreibt **nur die Firmware** — kein goTool, keine Host-Implementierung.
+
+- **Architektur & Datenflüsse:** [`ARCHITECTURE.md`](ARCHITECTURE.md)  
+- **Neues Feature end-to-end:** [`adding-a-feature.md`](adding-a-feature.md)
+
+---
+
+## Inhaltsverzeichnis
+
+1. [Projektziel](#1-projektziel)
+2. [Hardware und Pins](#2-hardware-und-pins)
+3. [Build und Flash](#3-build-und-flash)
+4. [Boot-Konfiguration](#4-boot-konfiguration)
+5. [UART-Protokoll](#5-uart-protokoll)
+6. [ESP-NOW-Protokoll](#6-esp-now-protokoll)
+7. [Befehlsreferenz (UART)](#7-befehlsreferenz-uart)
+8. [OTA](#8-ota)
+9. [BMA456 Beschleunigungssensor](#9-bma456-beschleunigungssensor)
+10. [LED-Ring](#10-led-ring)
+11. [Board-Input und Batterie](#11-board-input-und-batterie)
+12. [Persistenz (NVS)](#12-persistenz-nvs)
+13. [Protobuf und Code-Generierung](#13-protobuf-und-code-generierung)
+14. [Modulreferenz](#14-modulreferenz)
+15. [Logging-Tags](#15-logging-tags)
+
+---
+
+## 1. Projektziel
+
+**Powerpod** ist Firmware für ESP32-S3-Knoten in einem verteilten System:
+
+- Ein **Master** spricht per **UART** mit einem externen Host und verwaltet bis zu **16 Slaves** über **ESP-NOW**.
+- **Slaves** haben keinen UART-Befehlspfad; sie joinen über periodisches **Discover**, senden Heartbeats und liefern Sensor-/Statusdaten.
+- Master und Slave nutzen **identisches Firmware-Image**; Rolle und Funknetz werden beim Boot erkannt.
+
+Zielbild für den Host: Befehle an den Master senden; der Master steuert Slaves und **cached** deren Telemetrie (`client_registry`) für schnelle UART-Abfragen.
+
+---
+
+## 2. Hardware und Pins
+
+> Pinbelegung ist in `powerpod.h` als vorläufig markiert — mit Schaltplan abgleichen.
+
+| Signal | GPIO | Datei / Modul |
+|--------|------|----------------|
+| DIP Master/Slave | 4 | `powerpod.h` — Low = Master |
+| I2C SCL / SDA | 5 / 6 | IO-Expander `0x20`, BMA456 `0x18` |
+| Expander DIP-Bank (8) | PCF/TCA @ `0x20` | DIP1–7 = Netzwerk 1–7 (one-hot); **DIP8 ON = BLE host**, OFF = UART. High-Nibble auf PCB vertauscht → `reverse_high_nibble_lut`. Wechsel nur nach Reboot. |
+| UART1 TX / RX | **2 / 3** | `uart.h` (Adapter: ESP-TX → Host-RX); nur wenn DIP8 = UART |
+| LED-Ring (WS2812) | 7 | `led_ring.c` |
+| BMA456 Interrupt | 10 | `bosch456.c` |
+| Taster | 12 | `board_input.c` |
+| LiPo ADC 1 | 1 | `board_input.c` |
+| LiPo ADC 2 | 11 | `board_input.c` |
+
+**Host-Protokoll (UART oder BLE):** Gleiches Framing (`0xAA`…`0xCC`) + nanopb. **UART:** `UART_NUM_1`, **921600** Baud, 8N1. **BLE:** Gerät `Powerpod`, NUS-UUIDs `6e400001`/`6e400002` (Write=RX, Notify=TX). goTool CLI: `-port …` oder `-ble` / `-ble-name Powerpod`. **`gotool serve`** startet ohne Pflicht-Gerät; Dashboard/REST/WS verbinden UART oder BLE dynamisch (`-port`/`-ble` nur optionale Vorbelegung). **OTA** über UART oder BLE (DIP8); BLE braucht ATT MTU ≥ ~219 für 200-B-Chunks. Bei BLE + Accel-Stream: periodische `BLE_STREAM_TICK`-Notifies (`period_ms` 10–16; während OTA pausiert).
+
+**ESP-IDF-Log (Debug):** `esp_log_*` geht auf **UART0** (Standard-Konsole, typisch USB am Dev-Board, **115200** Baud, `CONFIG_ESP_CONSOLE_UART_NUM=0`). Das ist **getrennt** vom Host-UART1 — goTool liest keine `esp_log`-Ausgabe. Ohne angeschlossenes Debug-Kabel werden aktivierte Logs trotzdem formatiert und an UART0 gesendet (CPU-Overhead bleibt); nur `ESP_LOG_NONE` / Level-Filter vermeiden die Arbeit.
+
+**I2C:** 100 kHz, interne Pull-ups, gemeinsamer Bus für Expander und BMA456H.
+
+---
+
+## 3. Build und Flash
+
+**Ziel-Chip:** ESP32-S3 (ESP-IDF).
+
+```bash
+source ~/esp/esp-idf/export.sh   # oder export.fish
+cd /pfad/zu/powerpod
+idf.py build
+idf.py -p /dev/ttyUSB0 flash monitor
+```
+
+- **Git-Hash** wird beim Build in `POWERPOD_GIT_HASH` eingebettet (`main/CMakeLists.txt`).
+- **Firmware-Version:** `POWERPOD_FW_VERSION` (Default `1` in `esp_now_comm.c` / `cmd_version.c`).
+
+**Komponenten:**
+
+| Pfad | Inhalt |
+|------|--------|
+| `main/` | Anwendungslogik |
+| `components/bma456/` | Bosch BMA456H-Treiber (Vendor) |
+| `libs/nanopb/` | Protobuf-Codec für Embedded |
+
+---
+
+## 4. Boot-Konfiguration
+
+### 4.1 Initialisierungsreihenfolge (`powerpod.c`)
+
+1. `pod_settings_init()` — NVS
+2. `board_input_init_adc_only()` — LiPo-ADC
+3. Bei `POWERPOD_BATTERY_UV_ENABLE`: `battery_uv_evaluate_boot()` → ggf. Energiesparmodus (nur LED + ADC, **kein** weiterer Init)
+4. DIP → `app_config.master`
+5. I2C + IO-Expander → `app_config.network` (1–7) + `app_config.host_ble` (DIP8)
+6. `init_bma456()` — optional, bei Fehler weiter ohne Sensor
+7. `pod_settings_apply_accel_deadzone()` wenn Sensor da
+8. OTA-Partition → `app_config.running_partition`
+9. `board_input_start_lipo_monitor()` + `board_input_init_button()`
+10. `esp_now_comm_init(&app_config)` — **normaler Pfad** (Master + Slave)
+11. `led_ring_init()`
+12. **Nur Master:** `cmd_queue` → `init_cmdHandler` → `init_uart` **oder** `init_ble_host` → alle `cmd_*_register()`
+
+### 4.2 Master vs. Slave
+
+| Funktion | Master | Slave |
+|----------|--------|-------|
+| Host Command-Handler (UART oder BLE) | Ja | Nein |
+| ESP-NOW Discover senden | Ja (Broadcast) | Nein |
+| ESP-NOW auf Discover reagieren | Nein | Ja |
+| `client_registry` für Fremdknoten | Ja | Nein (nur eigener Join-State) |
+
+---
+
+## 5. UART-Protokoll
+
+*(Transport + Anwendung — Datenfluss-Diagramme in [`ARCHITECTURE.md`](ARCHITECTURE.md) §4–5.)*
+
+### 5.1 Rahmen
+
+| Byte | Inhalt |
+|------|--------|
+| 0 | `0xAA` Start |
+| 1–2 | Länge N little-endian (1–1024) |
+| 3…N+2 | Payload |
+| N+3 | XOR-Checksum über Payload |
+| N+4 | `0xCC` Stopp |
+
+Implementierung: `uart.c` — `parse_uart_byte()`, `uart_send_framed()`.
+
+### 5.2 Anwendungs-Payload
+
+| Offset | Bedeutung |
+|--------|-----------|
+| 0 | `MessageType` (siehe Enum in `uart_messages.proto`) |
+| 1… | nanopb `UartMessage` (ohne separates type-Feld im protobuf-Teil) |
+
+**Antworten** nutzen dieselbe Struktur: Byte 0 = Response-Typ, Rest = kodierte `UartMessage`.
+
+### 5.3 Handler-Pipeline
+
+1. `uart_read_task` parst Frames → `uart_enqueue_packet`
+2. `generic_msg_t` → `cmd_queue`
+3. `vCmdDispatcherTask` → registrierter `msg_callback_t`
+4. Handler: `uart_cmd_decode(data, len, &msg)` — `data` ist **nur** protobuf-Teil; bei `len > 0` strikt (Decode/`which_payload`-Fehler → Fehlerantwort)
+5. `ota_session_uart_cmd_allowed()` — während OTA nur OTA-Befehle
+6. Antwort: `uart_cmd_init_response()` + Felder setzen + `uart_cmd_send()`
+
+Hilfsmakro für Request-Felder:
+
+```c
+UART_CMD_REQ(&uart_msg, alox_UartMessage_accel_deadzone_request_tag, accel_deadzone_request)
+```
+
+---
+
+## 6. ESP-NOW-Protokoll
+
+*(Join, Tasks, Registry — [`ARCHITECTURE.md`](ARCHITECTURE.md) §6.)*
+
+### 6.1 Grundlagen
+
+- WiFi **STA**, keine AP-Verbindung.
+- **Kanal** = `app_config.network` (1–13).
+- Payload = ein `EspNowMessage` (nanopb), max. `ESP_NOW_MAX_DATA_LEN`.
+- Schema: `main/proto/esp_now_messages.proto`.
+
+### 6.2 Nachrichtentypen
+
+| Type | Richtung | Payload | Zweck |
+|------|----------|---------|--------|
+| `ESPNOW_DISCOVER` | M→Broadcast | `discover.network` | Slaves finden Master |
+| `ESPNOW_SLAVE_INFO` | S→M | `slave_info` | Erste Registrierung |
+| `ESPNOW_HEARTBEAT` | S→M | `heartbeat` | Keepalive 1 s |
+| `ESPNOW_SET_ACCEL_DEADZONE` | M→S | `accel_deadzone` | Deadzone LSB |
+| `ESPNOW_SET_TAP_CONFIG` | M→S | `tap_config` | Multitap-Parameter + NVS |
+| `ESPNOW_SET_ACCEL_STREAM` | M→S | `accel_stream` | Stream poll ~10 ms, TX on deadzone change |
+| `ESPNOW_ACCEL_SAMPLE` | S→M | `accel_sample` | x/y/z Roh-LSB |
+| `ESPNOW_SET_TAP_NOTIFY` | M→S | `tap_notify` | Tap-Arten filtern |
+| `ESPNOW_TAP_EVENT` | S→M | `tap_event` | kind 1/2/3 |
+| `ESPNOW_BATTERY_QUERY` | M→S | `battery_query` | On-demand |
+| `ESPNOW_BATTERY_REPORT` | S→M | `battery_report` | mV LiPo 1/2 |
+| `ESPNOW_LED_RING` | M→S | `led_ring` | Wie UART LED_RING |
+| `ESPNOW_FIND_ME` | M→S | `find_me` | LED-Locate |
+| `ESPNOW_RESTART` | M→S | `restart` | Reboot Slave |
+| `ESPNOW_UNICAST_TEST` | M→S | `unicast_test` | Link-Test |
+| `ESPNOW_ECHO_PING` | M→S | `echo_ping` | Latenztest (Host-Timestamp + `master_time_us`) |
+| `ESPNOW_ECHO_PONG` | S→M | `echo_pong` | Echo unverändert zurück zum Master |
+| `ESPNOW_OTA_*` | M↔S | `ota_*` | Firmware-Verteilung |
+
+### 6.3 Zeitkonstanten (`esp_now_comm.c`)
+
+| Konstante | Wert |
+|-----------|------|
+| Discover-Intervall | 500 ms |
+| Heartbeat | 1000 ms |
+| Client-Timeout (Master) | 3 × Heartbeat = 3 s → `available=false` |
+| Master-Verlust (Slave) | 5 s ohne Discover |
+| Accel-Stream | Poll 10 ms; TX nur bei Deadzone-Änderung (best-effort) |
+| Batterie-Report | 30 s (+ einmal 150 ms nach Join) |
+| Echo-Ping Timeout (Master) | 500 ms (`ESPNOW_ECHO_PING_TIMEOUT_MS`) |
+
+### 6.4 `EspNowSlavePresence`
+
+Felder: `network`, `mac` (6 B), `version`, `slave_id`, `available`, `used`.
+
+- `slave_id` = letztes Oktett der STA-MAC.
+- Registry auf dem Master indexiert über **Sender-MAC** der ESP-NOW-Callback.
+
+---
+
+## 7. Befehlsreferenz (UART)
+
+Nur auf dem **Master** registriert (`powerpod.c`). IDs aus `MessageType` in `uart_messages.proto`.
+
+| ID | Name | Modul | Kurzbeschreibung |
+|----|------|-------|------------------|
+| 1 | ACK | — | Reserviert |
+| 2 | ECHO | — | Reserviert |
+| 3 | VERSION | `cmd_version.c` | FW-Version, Git-Hash, OTA-Partition |
+| 4 | CLIENT_INFO | `cmd_client_info.c` | Liste `client_registry` |
+| 5 | CLIENT_INPUT | — | Geplant |
+| 6 | ACCEL_DEADZONE | `cmd_accel_deadzone.c` | Get/Set Deadzone lokal + ESP-NOW |
+| 7 | ESPNOW_UNICAST_TEST | `cmd_espnow_unicast_test.c` | Link-Test zu Slave |
+| 8 | LED_RING | `cmd_led_ring.c` | Ring lokal / ESP-NOW |
+| 16 | OTA_START | `cmd_ota.c` | Host-OTA beginnen (UART oder BLE) |
+| 17 | OTA_PAYLOAD | `cmd_ota.c` | Chunk ≤200 B |
+| 18 | OTA_END | `cmd_ota.c` | Abschluss + ESP-NOW-Verteilung |
+| 19 | OTA_STATUS | `cmd_ota.c` | Gerät → Host Status |
+| 20 | OTA_START_ESPNOW | `cmd_ota.c` | Nur ESP-NOW aus Staging |
+| 21 | OTA_SLAVE_PROGRESS | `cmd_ota_slave_progress.c` | Fortschritt pro Slave |
+| 22 | FIND_ME | `cmd_espnow_find_me.c` | LED Locate |
+| 23 | RESTART | `cmd_restart.c` | Master oder Slave reboot |
+| 25 | ACCEL_STREAM | `cmd_accel_stream.c` | ESP-NOW Accel-Stream an/aus (+ `period_ms` für BLE-Push) |
+| 26 | BATTERY_STATUS | `cmd_battery.c` | Cache LiPo Master + Slaves |
+| 27 | TAP_NOTIFY | `cmd_tap_notify.c` | Tap-Weiterleitung konfigurieren |
+| 29 | CACHE_STATUS | `cmd_cache_status.c` | Accel + Tap Cache (ein Round-Trip) |
+| 33 | BLE_STREAM_TICK | `ble_stream.c` | Master→Host Notify (nur BLE): Snapshot + `esp_timestamp_us` |
+| 30 | ESPNOW_ECHO_PING | `cmd_espnow_echo_ping.c` | Timestamp-Echo über ESP-NOW (Latenztest) |
+| 31 | SET_LOG_LEVEL | `cmd_set_log_level.c` | ESP-IDF-Log-Level global (`"*"`) lesen/setzen |
+| 32 | TAP_CONFIG | `cmd_tap_config.c` | BMA456 Multitap-Parameter + NVS |
+
+### 7.1 VERSION (3)
+
+- **Request:** nur Typ-Byte `0x03` oder leerer protobuf-Body.
+- **Response:** `version`, `git_hash`, `running_partition`.
+
+### 7.2 CLIENT_INFO (4)
+
+- **Response:** wiederholtes `ClientInfo` pro Registry-Eintrag: `id`, `mac`, `version`, `available`, `used`, `last_ping`, `last_success_ping`, Tap-/Stream-Flags.
+
+### 7.3 ACCEL_DEADZONE (6)
+
+- **Request:** `write`, `deadzone`, `client_id` (0=lokal), `all_clients`.
+- **Write Master:** Registry + `esp_now_comm_send_accel_deadzone` pro Slave; lokal `bma456` + NVS.
+- **Slave-Empfang:** `handle_slave_accel_deadzone` in `esp_now_comm.c`.
+
+### 7.4 ACCEL_STREAM (25)
+
+- Optional `period_ms` (10–16): BLE-Host-Push-Intervall für `BLE_STREAM_TICK` (UART ignoriert; Default 10).
+- Master setzt `client_registry_set_accel_stream` und sendet `ESPNOW_SET_ACCEL_STREAM`.
+- Slave-Task `accel_stream_task` pollt alle 10 ms; sendet `ESPNOW_ACCEL_SAMPLE` nur wenn eine Achse die Accel-Deadzone seit dem letzten gesendeten Sample überschreitet (best-effort / `send_best_effort`; Baseline-Reset beim Stream-Enable).
+
+### 7.5 TAP_NOTIFY (27)
+
+- Konfiguriert auf Slave welche Tap-Arten `ESPNOW_TAP_EVENT` auslösen.
+- Tap-Quelle: BMA456-Interrupt → `on_bma456_tap` in `esp_now_comm.c`.
+
+### 7.5a TAP_CONFIG (32)
+
+- **Request:** `write`, `client_id` (0=lokal), `all_clients`, Multitap-Felder (`tap_sens_thres` … `enable_triple`).
+- **Write:** `bma456_set_tap_config` + NVS `tap_cfg` lokal; Slaves via `ESPNOW_SET_TAP_CONFIG`.
+- Boot: `pod_settings_apply_tap_config()` nach `init_bma456()`.
+
+### 7.6 CACHE_STATUS (29)
+
+- **Request:** leer.
+- **Response:** pro Slave mit Stream und/oder Tap-Notify: gecachte Accel-Werte (`age_ms`) und konsumierte Tap-Events (`client_registry_take_tap`).
+
+### 7.7 BATTERY_STATUS (26)
+
+- Liest **nur Cache** — keine ESP-NOW-Roundtrip-Pflicht pro Abfrage.
+- Master-Batterie: `client_registry_set_master_battery` (Monitor-Task).
+
+### 7.8 LED_RING (8)
+
+| mode | Bedeutung |
+|------|-----------|
+| 0 | Clear |
+| 1 | Progress 0–100 % |
+| 2 | Digit 0–10 |
+| 3 | Blink |
+| 4 | Find-me (RGB-Sequenz) |
+| 5 | Solid color |
+
+`client_id=0` nur Master-Ring; `>0` ESP-NOW; `all_clients` Broadcast über Registry.
+
+### 7.9 FIND_ME (22) / RESTART (23)
+
+- `client_id=0`: lokaler Master (`led_ring_find_me` / `pod_schedule_restart`).
+- `client_id>0`: ESP-NOW Unicast zum Slave.
+
+### 7.10 ESPNOW_UNICAST_TEST (7)
+
+Minimaler Master→Slave-Ping; Slave loggt `UNICAST TEST OK`.
+
+### 7.11 ESPNOW_ECHO_PING (30)
+
+Round-Trip-Latenztest zu einem **Slave** (`client_id` > 0, muss in der Registry sein).
+
+**Ablauf:**
+
+1. Host (goTool) setzt `timestamp_us` (Unix-µs) und sendet `EspNowEchoPingRequest` per UART.
+2. Master (`cmd_espnow_echo_ping.c`) löst MAC aus Registry auf, ruft `esp_now_comm_echo_ping()` auf.
+3. Master sendet `ESPNOW_ECHO_PING` mit `host_timestamp_us` und `master_time_us` (`esp_timer_get_time()` kurz vor Send).
+4. Slave (`handle_echo_ping`) antwortet mit `ESPNOW_ECHO_PONG` (Felder unverändert).
+5. Master empfängt Pong, berechnet `esp_rtt_us = esp_timer_get_time() - master_time_us`, antwortet per UART.
+
+**Request:** `client_id`, `timestamp_us` (vom Host gesetzt).
+
+**Response:** `success`, `client_id`, `timestamp_us` (echoed), `esp_rtt_us` (nur bei Erfolg).
+
+| Feld | Quelle | Bedeutung |
+|------|--------|-----------|
+| `timestamp_us` | Host → Slave → Host | Korrelations-ID; muss mit Request übereinstimmen |
+| `esp_rtt_us` | Master | Rohe µs-Differenz von `esp_timer_get_time()` (Ping-Send → Pong-Empfang im `recv_cb`) |
+
+**Implementierung:** `main/cmd/cmd_espnow_echo_ping.c`, `esp_now_comm_echo_ping()` in `esp_now_master.c`, Slave `handle_echo_ping` in `esp_now_slave.c`.
+
+**Host-seitig (goTool):** `rtt_ms` = volle UART-Kette (Send bis Response-Empfang); unabhängig von `esp_rtt_us`.
+
+### 7.12 SET_LOG_LEVEL (31)
+
+Laufzeit-Steuerung des **globalen** ESP-IDF-Log-Levels auf dem Master (`esp_log_level_set("*", …)`). Kein ESP-NOW, kein NVS — nur Master.
+
+**Request:** `write`, `level` (`esp_log_level_t`: 0=NONE, 1=ERROR, 2=WARN, 3=INFO, 4=DEBUG, 5=VERBOSE).
+
+| `write` | Verhalten |
+|---------|-----------|
+| `false` / leer | Aktuelles Level lesen (`esp_log_level_get("*")`) |
+| `true` | Level setzen; ungültige Werte (>5) → `success=false` |
+
+**Response:** `success`, `level` (aktuell bzw. gesetzt).
+
+**Boot-Default:** `CONFIG_LOG_DEFAULT_LEVEL` in `sdkconfig` (aktuell **INFO** = 3). Kann per UART/Web-UI zur Laufzeit geändert werden; nach Reboot gilt wieder der sdkconfig-Wert.
+
+**Ausgabe:** Logs erscheinen auf **UART0** (Debug-USB), nicht auf dem Host-UART1 (goTool).
+
+```bash
+go run . -port /dev/ttyUSB0 log-level
+go run . -port /dev/ttyUSB0 log-level -set -level 3
+```
+
+---
+
+## 8. OTA
+
+### 8.1 Host-OTA (nur Master, UART oder BLE)
+
+Implementierung: `ota_uart.c`, Steuerung `cmd/cmd_ota.c`. Gleiches Protokoll über DIP8-Host (UART oder BLE NUS).
+
+| Phase | Host → Master | Master → Host |
+|-------|---------------|---------------|
+| Start | `OTA_START` + `total_size` | `OTA_STATUS` preparing → ready |
+| Daten | `OTA_PAYLOAD` ≤200 B, `seq` | `block_ack` je 4096 B Flash |
+| Ende | `OTA_END` | success/failed; startet ESP-NOW-Verteilung |
+
+- Inaktive Partition: `esp_ota_get_next_update_partition()`.
+- LED-Ring zeigt Fortschritt (blau Schreiben, grün Verteilung).
+- BLE: ATT MTU ≥ ~219 (preferred 517); große Antworten werden über mehrere Notifies gestückelt; `BLE_STREAM_TICK` pausiert während `ota_session_busy()`.
+- **BLE+ESP-NOW Coex:** Tag `wifi` auf `ESP_LOG_NONE` (WiFi-Task-Stack + Error-Logs → Overflow/Panic); während ESP-NOW-Dist `OTA_STATUS` DISTRIBUTING max. ~4/s und kürzere BLE-Notify-Retries.
+- **App-Rollback** (`CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE`): neues Image bootet als `PENDING_VERIFY`. `ota_confirm` markiert nach ~8 s stabilem Lauf `mark_app_valid`; Crash/Reset davor → Bootloader rollt auf die vorherige App zurück. Während `PENDING_VERIFY` ist ein neues `OTA_START` blockiert.
+
+### 8.2 ESP-NOW-OTA (Master → Slaves)
+
+`ota_espnow.c` — gleiche Status-Codes wie Host-OTA.
+
+1. `ESPNOW_OTA_START` + `total_size` → Slave `ota_espnow_slave_on_start`
+2. `ESPNOW_OTA_PAYLOAD` bis 200 B → 4 KiB Buffer auf Slave
+3. `ESPNOW_OTA_END` → Boot-Partition setzen + automatischer Reboot
+4. Slave antwortet `ESPNOW_OTA_STATUS` (mit `send_message_ex` + Semaphore auf Master)
+
+Während Distribution: keine Client-Timeouts in der Registry (Heartbeats werden im recv_cb verworfen). Nach Erfolg: Master und Slaves starten automatisch neu (Rollback-Confirm siehe 8.1).
+
+### 8.3 OTA_SLAVE_PROGRESS (21)
+
+Abfrage laufender oder letzter ESP-NOW-Verteilung: pro Slave `bytes_written`, `status`, `error`.
+
+---
+
+## 9. BMA456 Beschleunigungssensor
+
+| Thema | Detail |
+|-------|--------|
+| Wrapper | `bosch456.c` / `bosch456.h` |
+| Chip-Variante | BMA456**H** (`bma456h.c` im Component) |
+| I2C | Adresse 0x18, 100 kHz |
+| Polling | Task ~10 Hz |
+| Interrupt GPIO 10 | Single/Double/Triple Tap |
+| Deadzone | Software-Filter für Logs/Stream (Default 100 LSB) |
+| API | `bma456_read_accel`, `bma456_set_accel_deadzone`, `bma456_set_tap_handler` |
+
+Ohne Sensor: `bma456_is_ready() == false`, Firmware läuft weiter.
+
+---
+
+## 10. LED-Ring
+
+- **95 LEDs**, WS2812 über RMT (`led_ring.c`).
+- Segment-Karten für Ziffern 0–10 in `digit_lookup[]`.
+- **Kein** lokaler Demo-Loop — Anzeige nur über UART (`cmd_led_ring.c`) oder ESP-NOW `ESPNOW_LED_RING`.
+- Helligkeit: `intensity` 0 → Default ~5 % (`LED_RING_DEFAULT_INTENSITY`).
+- Modi: `0` clear … `5` color, `6` **battery-low** (erste 4 LEDs rot ~10 %, 5 s).
+
+---
+
+## 11. Board-Input und Batterie
+
+`board_input.c`:
+
+- **Taster** GPIO 12 — Logging bei Druck.
+- **LiPo-ADC** GPIO 1 und GPIO 11 (Pin-Spannung in mV).
+- Master: `master_monitor_task` aktualisiert Master-Batterie alle 30 s.
+- Slave: `slave_send_battery_report_to_master` nach Join, Heartbeat und Query.
+
+Spannungen in Millivolt in Registry und `BATTERY_STATUS`-UART.
+
+### Software-UV-Schutz (`battery_uv.c`)
+
+Aktivierbar mit `POWERPOD_BATTERY_UV_ENABLE` in `powerpod.h` (CMake-Override möglich). Runtime zusätzlich NVS `uv_en` (Default **aus**) — UART `BATTERY_UV` / Dashboard / ESP-NOW `ESPNOW_SET_BATTERY_UV`.
+
+| Zustand | ADC-Schwelle | Logik |
+|---------|--------------|-------|
+| Extern / kein Pack | < 100 mV | Alle gültigen Kanäle → normaler Boot |
+| UV | 100…2299 mV | Ein gültiger Kanal reicht |
+| Geladen | ≥ 3000 mV | Alle nicht-absent gültigen Kanäle |
+
+- NVS-Keys `uv_latch`, `uv_en` in `pod_settings.c`
+- Boot: ADC früh, bei UV nur LED + ADC-Poll (kein ESP-NOW/WiFi/UART/I2C/Button); übersprungen wenn `uv_en=0`
+- Runtime: `battery_uv_poll()` im LiPo-Monitor (2 Samples Debounce), gated by `uv_en`
+- UART `BATTERY_UV`: `client_id` / `all_clients`; Disable cleart Latch
+- LED-Anzeige: Mode `6` battery-low (`led_ring_show_battery_low`)
+
+---
+
+## 12. Persistenz (NVS)
+
+`pod_settings.c` — Namespace `powerpod`:
+
+| Key | Inhalt |
+|-----|--------|
+| `accel_dz` | Accel-Deadzone LSB |
+| `tap_cfg` | BMA456 Multitap-Config (Blob) |
+| `uv_latch` | Software-UV-Zustand (`1` = Energiesparmodus) |
+| `uv_en` | Runtime-Enable UV-Schutz (`0`/`1`, fehlend = aus) |
+
+Gespeichert bei lokalem Set (UART `client_id=0`, ESP-NOW auf Slave). Geladen nach `init_bma456()`.
+
+---
+
+## 13. Protobuf und Code-Generierung
+
+```bash
+make proto_generate        # beide Schemas
+make proto_generate_uart   # nur uart_messages.proto
+make proto_generate_espnow # nur esp_now_messages.proto
+```
+
+**Ausgabe:** `main/proto/*.pb.c`, `*.pb.h`  
+**Optionen:** `main/proto/uart_messages.options` (nanopb max_size etc.)
+
+Includes in generierten `.pb.c` müssen `"uart_messages.pb.h"` heißen (nicht `main/proto/...`).
+
+**Paketname protobuf:** `alox` → C-Prefix `alox_`.
+
+---
+
+## 14. Modulreferenz
+
+### 14.1 Kern
+
+| Datei | Rolle |
+|-------|--------|
+| `powerpod.c` | `app_main`, Init, Master-Register |
+| `app_config.h` | Laufzeit-Konfiguration |
+| `cmd_handler.c` | Queue + Dispatcher |
+| `uart.c` | Framing |
+| `uart_proto.c` | UartMessage send |
+| `uart_cmd.c` | Handler-Hilfen |
+
+### 14.2 Kommunikation
+
+| Datei | Rolle |
+|-------|--------|
+| `esp_now_comm.c` | Init, recv-Router |
+| `esp_now_core.c` | WiFi, Peer, gemeinsamer Send |
+| `esp_now_master.c` | Master-Tasks, Registry, Unicast send |
+| `esp_now_slave.c` | Join, Heartbeat, Accel/Tap send |
+| `esp_now_proto.c` | nanopb für EspNowMessage |
+| `client_registry.c` | Slave-Tabelle + Telemetrie-Cache |
+
+### 14.3 Befehle (`main/cmd/`)
+
+| Datei | UART-Typ |
+|-------|----------|
+| `cmd_version.c` | VERSION |
+| `cmd_client_info.c` | CLIENT_INFO |
+| `cmd_accel_deadzone.c` | ACCEL_DEADZONE |
+| `cmd_accel_stream.c` | ACCEL_STREAM |
+| `cmd_tap_config.c` | TAP_CONFIG |
+| `cmd_tap_notify.c` | TAP_NOTIFY |
+| `cmd_cache_status.c` | CACHE_STATUS |
+| `cmd_battery.c` | BATTERY_STATUS |
+| `cmd_led_ring.c` | LED_RING |
+| `cmd_espnow_find_me.c` | FIND_ME |
+| `cmd_restart.c` | RESTART |
+| `cmd_espnow_unicast_test.c` | ESPNOW_UNICAST_TEST |
+| `cmd_espnow_echo_ping.c` | ESPNOW_ECHO_PING |
+| `cmd_set_log_level.c` | SET_LOG_LEVEL |
+| `cmd_ota.c` | OTA_* |
+| `cmd_ota_slave_progress.c` | OTA_SLAVE_PROGRESS |
+
+### 14.4 Domäne
+
+| Datei | Rolle |
+|-------|--------|
+| `bosch456.c` | Accelerometer + Tap |
+| `led_ring.c` | LED-Anzeige |
+| `board_input.c` | Taster, ADC |
+| `battery_uv.c` | Software-UV-Schutz, Energiesparmodus |
+| `pod_settings.c` | NVS |
+| `pod_reboot.c` | Verzögerter Restart |
+| `ota_uart.c` | Flash-Puffer UART-OTA |
+| `ota_espnow.c` | OTA Master/Slave; Slave-Work-Queue |
+| `ota_session.c` | OTA-Sperre für UART-Dispatcher |
+
+### 14.5 Protobuf
+
+| Datei | Rolle |
+|-------|--------|
+| `proto/uart_messages.proto` | UART-Vertrag |
+| `proto/esp_now_messages.proto` | ESP-NOW-Vertrag |
+| `proto/pb_encode.c`, `pb_decode.c`, `pb_common.c` | nanopb Runtime |
+
+---
+
+## 15. Logging-Tags
+
+**Level zur Laufzeit:** UART `SET_LOG_LEVEL` (31) oder Dashboard „ESP Log-Level“ — steuert nur die Konsolen-Ausgabe auf UART0, nicht das Host-Protokoll.
+
+| Tag | Modul |
+|-----|--------|
+| `[Main]` | powerpod.c |
+| `[LOG_LVL]` | cmd_set_log_level.c |
+| `[UART]` | uart.c |
+| `[CMDH]` | cmd_handler.c |
+| `[UART_CMD]` | uart_cmd.c |
+| `[ESPNOW]` | esp_now_comm.c |
+| `[CLIENTS]` | client_registry.c |
+| `[BMA456]` | bosch456.c |
+| `[VERSION]` etc. | jeweiliger cmd_* |
+
+Typischer Ablauf bei UART-Befehl:
+
+```
+[UART] received message cmd=0x06 len=…
+[CMDH] trigger command ACCEL_DEADZONE (0x06)
+[ACCEL_DZ] …
+```
+
+---
+
+## Anhang: Neues UART-Kommando hinzufügen
+
+1. `uart_messages.proto` erweitern → `make proto_generate_uart`
+2. `cmd/cmd_neu.c` mit `handle_*` + `uart_cmd_register()`
+3. In `powerpod.c` `cmd_neu_register()` aufrufen (nur Master-Zweig)
+4. Bei Slave-Bedarf: `esp_now_messages.proto` + `esp_now_comm_send_*` + Slave-Zweig in `espnow_recv_cb`
+
+Siehe [`adding-a-feature.md`](adding-a-feature.md) für ein vollständiges Beispiel (Find Me).

docs/adding-a-feature.md

@@ -0,0 +1,351 @@
+# Feature hinzufügen — von UART bis ESP-NOW
+
+Dieser Guide beschreibt die **komplette Kette** am Beispiel **Find me** (Commit `efd6260`): Host sendet ein UART-Kommando an den Master, der die Aktion lokal ausführt oder per ESP-NOW an einen Slave weiterleitet.
+
+## Architektur (Überblick)
+
+```mermaid
+sequenceDiagram
+  participant Host as Host (goTool / Dashboard)
+  participant Master as Master (UART + ESP-NOW)
+  participant Slave as Slave (ESP-NOW)
+
+  Host->>Master: UART-Frame [cmd_id + UartMessage protobuf]
+  Master->>Master: cmd_* Handler (Queue)
+  alt client_id == 0
+    Master->>Master: z.B. led_ring_find_me()
+  else client_id > 0
+    Master->>Slave: ESP-NOW EspNowMessage (unicast)
+    Slave->>Slave: esp_now_recv_cb → Handler
+  end
+  Master->>Host: UART-Response (UartMessage)
+```
+
+| Schicht | Dateien | Rolle |
+|---------|---------|--------|
+| Schema UART | `main/proto/uart_messages.proto` | `MessageType`, Request/Response für Host ↔ Master |
+| Schema ESP-NOW | `main/proto/esp_now_messages.proto` | Master ↔ Slave (ohne UART) |
+| Transport UART | `main/uart.c`, `goTool/uart/` | Rahmen `0xAA … 0xCC`, Byte 0 = Command-ID |
+| Dispatch | `main/cmd/cmd_handler.c`, `main/uart_cmd.c` | Queue + `uart_cmd_register()` |
+| Master-Logik | `main/cmd/cmd_*.c` | Decode, Registry, ESP-NOW senden |
+| ESP-NOW | `main/esp_now_comm.c` | Encode/Decode, Send, Slave-`recv_cb` |
+| Geräte-Funktion | z.B. `main/led_ring.c` | Wiederverwendbare Aktion (Master + Slave) |
+| Host | `goTool/cmd_*.go`, `api_serve.go`, `webui/` | CLI, HTTP, UI |
+
+**Wichtig:** UART-Befehle laufen auf dem **Master** (nur wenn `app_config.master`). Slaves haben keinen UART-Command-Handler; sie reagieren auf **ESP-NOW**. Die eigentliche Wirkung (LED, Sensor, …) liegt in gemeinsamen Modulen (`led_ring`, `bosch456`, …).
+
+---
+
+## Wann braucht man was?
+
+| Ziel | UART (`uart_messages.proto`) | ESP-NOW (`esp_now_messages.proto`) |
+|------|------------------------------|-------------------------------------|
+| Nur Master (angeschlossener Pod) | Ja | Nein |
+| Einen registrierten Slave ansteuern | Ja (Master leitet weiter) | Ja |
+| Slave → Master Rückmeldung | Optional (UART-Status) | Ja, wenn Slave antworten soll |
+
+**Find me:** UART `FIND_ME` mit `client_id`; `0` = Master-Ring, `>0` = Unicast `ESPNOW_FIND_ME` an die Slave-MAC aus der Registry.
+
+Referenz für **nur ESP-NOW-Weiterleitung ohne lokale Wirkung:** `main/cmd/cmd_espnow_unicast_test.c`  
+Referenz für **Master lokal + Slave + `client_id`:** `main/cmd/cmd_espnow_find_me.c`, `main/cmd/cmd_accel_deadzone.c`
+
+---
+
+## Schritt 1 — Protobuf (UART)
+
+Datei: `main/proto/uart_messages.proto`
+
+1. **Neue ID** in `enum MessageType` (freie Nummer wählen, z.B. `22`):
+
+```protobuf
+FIND_ME = 22;
+```
+
+2. **Request/Response** definieren und im `UartMessage`-`oneof` eintragen (neue Feldnummern, nicht wiederverwenden):
+
+```protobuf
+message EspNowFindMeRequest {
+  uint32 client_id = 1;
+}
+
+message EspNowFindMeResponse {
+  bool success = 1;
+  uint32 client_id = 2;
+}
+
+// in message UartMessage { oneof payload { …
+  EspNowFindMeRequest espnow_find_me_request = 19;
+  EspNowFindMeResponse espnow_find_me_response = 20;
+}
+```
+
+3. **Generieren:**
+
+```bash
+make proto_generate_uart
+make gotool-proto
+```
+
+Erzeugt u.a. `main/proto/uart_messages.pb.h`, `.pb.c` und `goTool/pb/uart_messages.pb.go`.
+
+---
+
+## Schritt 2 — Protobuf (ESP-NOW), falls Slaves betroffen
+
+Datei: `main/proto/esp_now_messages.proto`
+
+1. Neuer Wert in `enum EspNowMessageType`:
+
+```protobuf
+ESPNOW_FIND_ME = 10;
+```
+
+2. Payload-Nachricht + Eintrag im `EspNowMessage`-`oneof`:
+
+```protobuf
+message EspNowFindMe {
+  uint32 client_id = 1;  // 0 = alle; sonst nur passende slave_id
+}
+
+// EspNowMessage.oneof:
+  EspNowFindMe find_me = 11;
+```
+
+3. **Generieren:**
+
+```bash
+make proto_generate_espnow
+# oder: make proto_generate
+```
+
+**Hinweis:** Master und alle Slaves müssen dieselbe ESP-NOW-Proto-Version flashen, sobald sich `esp_now_messages.proto` ändert.
+
+---
+
+## Schritt 3 — Geräte-Logik (gemeinsam)
+
+Funktion, die auf **Master und Slave** gleich wirken soll, gehört **nicht** in den UART-Handler, sondern in ein Modul (z.B. `led_ring`).
+
+Find me:
+
+- `led_ring_find_me()` in `led_ring.c` — sequenz `LED_CMD_FIND_ME` (3× rot/grün/blau, volle Helligkeit)
+- Optional separater UART-Pfad nur für Ring-Steuerung: `LED_RING` mode `4` in `main/cmd/cmd_led_ring.c` (ohne ESP-NOW)
+
+---
+
+## Schritt 4 — UART-Command-Handler (nur Master)
+
+Neue Dateien: `main/cmd/cmd_espnow_find_me.c`, `main/cmd/cmd_espnow_find_me.h`
+
+Muster (gekürzt):
+
+```c
+static void reply(bool success, uint32_t client_id) {
+  alox_UartMessage response;
+  uart_cmd_init_response(&response, alox_MessageType_FIND_ME,
+                         alox_UartMessage_espnow_find_me_response_tag);
+  response.payload.espnow_find_me_response.success = success;
+  response.payload.espnow_find_me_response.client_id = client_id;
+  uart_cmd_send(&response, TAG);
+}
+
+static void handle_find_me(const uint8_t *data, size_t len) {
+  alox_UartMessage uart_msg;
+  if (uart_cmd_decode(data, len, &uart_msg) != ESP_OK) { … }
+
+  const alox_EspNowFindMeRequest *req = UART_CMD_REQ(
+      &uart_msg, alox_UartMessage_espnow_find_me_request_tag,
+      espnow_find_me_request);
+  if (req == NULL) { … }
+
+  if (req->client_id == 0) {
+    led_ring_find_me();   // lokal
+    reply(true, 0);
+    return;
+  }
+
+  const client_info_t *client = client_registry_find_by_id(req->client_id);
+  if (client == NULL) { reply(false, req->client_id); return; }
+
+  esp_err_t err = esp_now_comm_send_find_me(client->mac, req->client_id);
+  reply(err == ESP_OK, req->client_id);
+}
+
+void cmd_espnow_find_me_register(void) {
+  uart_cmd_register(alox_MessageType_FIND_ME, handle_find_me);
+}
+```
+
+Hilfs-APIs (`uart_cmd.h`):
+
+| API | Zweck |
+|-----|--------|
+| `uart_cmd_decode()` | Protobuf-Body (ohne führendes Command-Byte) dekodieren |
+| `UART_CMD_REQ()` | Sicheres Lesen des `oneof`-Zweigs |
+| `uart_cmd_init_response()` | Response-Typ + `which_payload` setzen |
+| `uart_cmd_send()` | Antwort UART raus |
+
+**Registrierung** in `main/powerpod.c` (nur im `if (app_config.master)`-Block):
+
+```c
+cmd_espnow_find_me_register();
+```
+
+**Build:** `main/CMakeLists.txt` → `"cmd/cmd_espnow_find_me.c"`  
+**Logging-Namen:** `main/cmd/cmd_handler.c` → `case alox_MessageType_FIND_ME: return "FIND_ME";`
+
+### Ablauf UART intern
+
+1. `uart_read_task` liest Frame, legt `msg_id = payload[0]` und Rest in Queue.
+2. `vCmdDispatcherTask` ruft den registrierten Handler mit `data` = Bytes **nach** der ID auf.
+3. Handler antwortet synchron über `uart_cmd_send` (die LED-Animation läuft danach im `led_task` weiter).
+
+---
+
+## Schritt 5 — ESP-NOW senden (Master)
+
+In `main/esp_now_comm.c`:
+
+1. **Statische Sendefunktion** (wie `send_unicast_test`):
+
+```c
+static esp_err_t send_find_me(const uint8_t *dest_mac, uint32_t client_id) {
+  alox_EspNowMessage msg = alox_EspNowMessage_init_zero;
+  msg.type = alox_EspNowMessageType_ESPNOW_FIND_ME;
+  msg.which_payload = alox_EspNowMessage_find_me_tag;
+  msg.payload.find_me.client_id = client_id;
+  return send_message(dest_mac, &msg);
+}
+```
+
+2. **Öffentliche API** in `esp_now_comm.h` / `.c`:
+
+```c
+esp_err_t esp_now_comm_send_find_me(const uint8_t mac[CLIENT_MAC_LEN],
+                                    uint32_t client_id);
+```
+
+Prüfungen: `mac != NULL`, `s_config.master`, Peer per `ensure_peer()` (passiert in `send_message`).
+
+---
+
+## Schritt 6 — ESP-NOW empfangen (Slave)
+
+Im Slave-Zweig von `espnow_recv_cb` (`!s_config.master`):
+
+1. Handler-Funktion, typisch mit **Master-MAC-Check** und **`client_id`-Filter** (wie Deadzone):
+
+```c
+static void handle_slave_find_me(const uint8_t *master_mac,
+                                 const alox_EspNowFindMe *req) {
+  uint32_t my_id = s_own_mac[5];
+  if (req->client_id != 0 && req->client_id != my_id) return;
+  if (s_slave_joined && !mac_equal(master_mac, s_master_mac)) return;
+  led_ring_find_me();
+}
+```
+
+2. Im `switch (msg.which_payload)`:
+
+```c
+case alox_EspNowMessage_find_me_tag:
+  if (!s_slave_joined || !mac_equal(info->src_addr, s_master_mac)) break;
+  handle_slave_find_me(info->src_addr, &msg.payload.find_me);
+  break;
+```
+
+Slaves führen `led_ring_init()` in `powerpod.c` ebenfalls aus — Ring-Hardware ist auf beiden Rollen vorhanden.
+
+---
+
+## Schritt 7 — Host (goTool)
+
+### CLI
+
+`goTool/cmd_find_me.go`:
+
+- `UartMessage` mit `Type: MessageType_FIND_ME` und `EspnowFindMeRequest`
+- Payload = `[byte(MessageType_FIND_ME)] + proto.Marshal(msg)`
+- `exchangePayload` → Response dekodieren
+
+`main.go`: Command `find-me` registrieren, `-port` Pflicht.
+
+```bash
+go run . -port /dev/ttyUSB0 find-me
+go run . -port /dev/ttyUSB0 find-me -client 16
+```
+
+### Dashboard / HTTP
+
+1. `managedSerial.FindMe(clientID)` in `client_api.go` (UART-Serial mutex wie andere Befehle).
+2. `POST /api/find-me` mit `{"client_id": 0}` in `api_serve.go`.
+3. Button in `goTool/webui/index.html` (Master + pro Slave-Zeile).
+
+### Serial-Format (Host)
+
+Entspricht `main/README.md`:
+
+| Byte | Inhalt |
+|------|--------|
+| Frame | `0xAA`, Länge (uint16 LE), Payload, XOR-Checksum, `0xCC` |
+| Payload[0] | `MessageType` (z.B. `22` = FIND_ME) |
+| Payload[1…] | Nanopb-`UartMessage` |
+
+---
+
+## Schritt 8 — Dokumentation & Test
+
+1. **`main/README.md`:** Zeile in UART-Tabelle, ggf. ESP-NOW-Tabelle, eigener Abschnitt mit Beispiel-`go run`.
+2. **`goTool/README.md`:** Command-Tabelle + HTTP-API.
+3. **Build:**
+
+```bash
+make proto_generate
+cd goTool && go build .
+idf.py build
+```
+
+4. **Manuell testen:**
+
+| Test | Erwartung |
+|------|-----------|
+| `find-me` (client 0) | Master-Ring blinkt RGB |
+| `find-me -client <id>` | Nur dieser Slave blinkt; Log Master: `unicast FIND_ME` |
+| Slave offline / unbekannte ID | `success=false` in UART-Response |
+| Dashboard-Buttons | Gleiches Verhalten wie CLI |
+
+---
+
+## Checkliste (Kurz)
+
+- [ ] `uart_messages.proto`: `MessageType`, Request, Response, `oneof`
+- [ ] `esp_now_messages.proto` (falls Slave): `EspNowMessageType`, Message, `oneof`
+- [ ] `make proto_generate` + `make gotool-proto`
+- [ ] Geräte-Modul (z.B. `led_ring_*`)
+- [ ] `cmd_*.c` + `uart_cmd_register`
+- [ ] `esp_now_comm`: `send_*` + Slave-`recv` case
+- [ ] `CMakeLists.txt`, `powerpod.c`, `cmd/cmd_handler.c` Name
+- [ ] goTool: CLI, `client_api`, optional `api_serve` + WebUI
+- [ ] README aktualisieren
+- [ ] Master + Slave flashen bei ESP-NOW-Proto-Änderung
+
+---
+
+## Referenz-Dateien (Find me)
+
+| Bereich | Datei |
+|---------|--------|
+| UART Proto | `main/proto/uart_messages.proto` |
+| ESP-NOW Proto | `main/proto/esp_now_messages.proto` |
+| UART Handler | `main/cmd/cmd_espnow_find_me.c` |
+| ESP-NOW | `main/esp_now_comm.c`, `main/esp_now_comm.h` |
+| LED | `main/led_ring.c`, `main/led_ring.h` |
+| Host CLI | `goTool/cmd_find_me.go` |
+| HTTP/UI | `goTool/api_serve.go`, `goTool/webui/index.html` |
+
+Ähnliche Features zum Abgucken:
+
+- **Nur Master, kein ESP-NOW:** `main/cmd/cmd_version.c`, `main/cmd/cmd_led_ring.c`, `main/cmd/cmd_set_log_level.c`
+- **Nur Slave per ESP-NOW (Master leitet nur durch):** `main/cmd/cmd_espnow_unicast_test.c`
+- **Master + alle Slaves / Filter:** `main/cmd/cmd_accel_deadzone.c`
+- **Großer ESP-NOW-Fluss mit Status:** `ota_espnow.c`, `main/cmd/cmd_ota.c`

goTool/Makefile

@@ -0,0 +1,2 @@
+win:
+	GOOS=windows GOARCH=386 go build .

goTool/README.md

@@ -24,22 +24,36 @@ go run . -port /dev/ttyUSB0 clients
 |---------|--------------|-------------|
 | `version` | `0x03` | Prints `version` and `git_hash` from firmware |
 | `clients` | `0x04` | Lists slaves registered on the master via ESP-NOW |
+| `deadzone` | `0x06` | Get/set accelerometer deadzone LSB (`-set`, `-value`, `-client`, `-all`) |
+| `tap-config` | `0x20` | Get/set BMA456 tap detection params (`-set`, `-client`, `-all`, `-sens`, `-max-gest`, `-shock`, `-quiet`, `-wait`, `-axis`, `-single`, `-double`, `-triple`) |
+| `tap-notify` | `0x1b` | Get/set which tap kinds (single/double/triple) notify via ESP-NOW (`-set`, `-client`, `-all`, `-single`, `-double`, `-triple`) |
+| `cache-status` | `0x1d` | Subscribed accel + tap cache (`CACHE_STATUS`); one UART round-trip for ~8 ms polling |
 | `unicast-test` | `0x07` | Sends ESP-NOW unicast test to one slave (`-client`, `-seq`) |
+| `echo-ping` | `0x1e` | ESP-NOW echo round-trip to one slave (`-client`); prints `rtt_ms` (host UART chain) and `esp_rtt_us` (master ESP-NOW, raw µs) |
 | `test` | — | Run an automated scenario (JSON configs under `testdata/`) |
 | `serve` | — | Web dashboard at `http://localhost:8080` (WebSocket live updates) |
 | `ota` | 16–19 | UART firmware upload to master; firmware then pushes to slaves via ESP-NOW |
 | `ota-progress` | 21 | Query per-slave ESP-NOW OTA progress on the master (`-client N`, default all) |
-| `led-ring` | 8 | LED ring: `-mode clear\|progress\|digit\|blink`, `-progress`, `-digit`, RGB, `-intensity` (0 = ~5 %), `-blink-ms`, `-blink-count` |
+| `led-ring` | 8 | LED ring: `-mode clear\|color\|progress\|digit\|blink\|find-me\|battery-low`, `-client`, `-all` |
+| `find-me` | 22 | Locate pod (`-client 0` master, `>0` slave via ESP-NOW) |
+| `restart` | 23 | Reboot master or slave (`-client 0` / `>0`) |
+| `log-level` | `0x1f` | Get/set master ESP-IDF log level for tag `"*"` (`-set`, `-level` 0–5); output on UART0 debug, not host UART |
+| `battery-uv` | `0x24` | Get/set software LiPo UV protection (`-set -enable`/`-enable=false`, `-client`, `-all`) |
+| `input-send-mode` | `0x23` | Get/set slave accel/tap ESP-NOW TX path (`-set -mode 0..3`, `-all` or `-client N`): best_effort/fast/wait/reliable |
 
 `clients` requires slaves to have responded to master discover broadcasts first.
 
+For adding commands end-to-end (UART, ESP-NOW, CLI, dashboard), see **[docs/adding-a-feature.md](../docs/adding-a-feature.md)** (Find me example).
+
 ### Automated tests
 
 Bench **configs** (`testdata/configs/`) list network, MACs, and serial ports (`uart.master` for commands, `*_console` for esptool reset). **Scenarios** run UART commands plus optional `reset` steps.
 
 ```bash
 go run . test -list-configs
+go run . test -list-scenarios
 go run . test -config example-lab -scenario smoke
+go run . test -config example-lab -scenario uart_cmds
 go run . test -config my-lab -scenario smoke -port /dev/ttyUSB1 -v
 ```
 
@@ -49,36 +63,56 @@ See [`testdata/README.md`](testdata/README.md) for the JSON schema.
 
 ### Web dashboard
 
-Polls the master over UART and pushes state to the browser via WebSocket (Alpine.js + Bootstrap 5).
+Starts without a required host link. Connect UART or BLE from the UI (or pre-connect with `-port` / `-ble`). State is pushed to the browser via WebSocket (Alpine.js + Bootstrap 5). OTA works over UART or BLE (BLE needs ATT MTU ≥ 219).
 
 ```bash
+go run . serve
 go run . -port /dev/ttyUSB0 serve
-go run . -port /dev/ttyUSB0 serve -addr :8080 -interval 2s
+go run . -ble serve
+go run . serve -addr :8080 -interval 2s
+go run . serve -api-addr :8081 -accel-interval 16ms
 make gotool-serve PORT=/dev/ttyUSB0
 ```
 
-Open [http://localhost:8080](http://localhost:8080) — shows master firmware info and the ESP-NOW client table from `CLIENT_INFO`.
+Open [http://localhost:8080](http://localhost:8080) — Host-Verbindung panel (UART ports / BLE scan), master firmware info, ESP-NOW client table.
 
-If the UART device is unplugged or the port disappears, `serve` keeps running and retries on each poll interval; the UI shows **UART off** until the port is available again.
+**Tap (dashboard):** two independent controls per slave:
 
-The dashboard can configure nodes using the same UART commands as the CLI:
+| Column | Meaning |
+|--------|---------|
+| Tap-Notify (S/D/T) | Which tap kinds the **slave** sends to the master over ESP-NOW (UART `TAP_NOTIFY`) — does **not** poll UART |
+| Tap (An/Aus) | Host **receive**: poll master tap cache (~8 ms) and show last tap for **≥2 s** |
 
-| UI action | CLI equivalent |
-|-----------|------------------|
-| Nur Master | `deadzone -set -value N -client 0` |
-| Einzelner Slave | `deadzone -set -value N -client ID` |
-| Alle Slaves | per-slave ESP-NOW (Master bleibt unverändert; CLI `-all` setzt auch den Master) |
-| Unicast test | `unicast-test -client ID` |
+Enable notify first, then turn receive on to see events. Same split as the external WebSocket API (`set_tap_notify` vs `set_tap_stream`).
 
-HTTP API (used by the web UI): `GET/POST /api/deadzone`, `POST /api/unicast-test`, `POST /api/ota` (multipart field `firmware`, max 2 MiB).
+If the host disconnects, `serve` keeps running; the badge shows **off** until you reconnect from the UI or via REST/WS.
+
+### HTTP / WebSocket API
+
+`serve` also listens on **`:8081`** for external programs (`-api-addr`, empty to disable). Same `managedHost` as the dashboard (UART or BLE).
+
+| Doc | Content |
+|-----|---------|
+| **[docs/API_WEBSOCKET.md](docs/API_WEBSOCKET.md)** | `ws://…:8081/ws` commands and **`input` push stream** (accel + tap) |
+| **[docs/API_REST.md](docs/API_REST.md)** | REST on `:8080` (dashboard) and `:8081` (battery, LED, service info) |
+
+CLI:
+
+```bash
+go run . -port /dev/ttyUSB0 tap-config
+go run . -port /dev/ttyUSB0 tap-config -set -sens 5 -axis 2
+go run . -port /dev/ttyUSB0 tap-notify -client 16 -set -single
+go run . -port /dev/ttyUSB0 cache-status
+```
 
 | UI / API | Behaviour |
 |----------|-----------|
-| Firmware OTA card | Same as `ota` CLI; WebSocket `ota_progress` with `step` `master` (UART) then `slaves` (ESP-NOW) |
-| `POST /api/ota` | Upload `.bin` to master only — slaves are updated by firmware over ESP-NOW after `OTA_END` |
+| Firmware OTA card | Same as `ota` CLI; dashboard WebSocket `ota_progress` ([REST doc](docs/API_REST.md)) |
+| `POST /api/ota` | Upload `.bin` to master — slaves updated by firmware over ESP-NOW after `OTA_END` |
 
 ```bash
 go run . -port /dev/ttyUSB0 ota build/powerpod.bin
+go run . -ble ota build/powerpod.bin
 ```
 
 Waits for **ready** after start (~30 s erase), sends 200-byte `OTA_PAYLOAD` frames, reads **block_ack** every 4 KiB, then `OTA_END`. The master then distributes to all available slaves (no extra host traffic); **success** is reported only when that finishes. Allow several minutes for large images. Reboot master and slaves to boot the new firmware.
@@ -89,8 +123,24 @@ go run . -port /dev/ttyUSB0 unicast-test -client 16 -seq 42
 
 On success the slave serial log should show `UNICAST TEST OK from master … seq=42`.
 
+```bash
+go run . -port /dev/ttyUSB0 echo-ping -client 16
+go run . -port /dev/ttyUSB0 log-level
+go run . -port /dev/ttyUSB0 log-level -set -level 3
+```
+
+`log-level` controls `esp_log_*` on the master (UART0 USB console). The host protocol UART (GPIO 2/3) is unchanged.
+
+Measures latency to one slave. `rtt_ms` is the full host round-trip (UART + ESP-NOW + UART back). `esp_rtt_us` is the master-side ESP-NOW leg only (`esp_timer_get_time()` delta, raw microseconds from firmware).
+
 Example output:
 
+```
+echo ping: success=true client_id=16 rtt_ms=49.729 esp_rtt_us=18234
+```
+
+`clients` example:
+
 ```
 clients (2):
   [0] id=42 mac=aabbccddeeff ver=1 available=true used=false last_ping=250 last_success_ping=250

goTool/accel_stream_ctl.go

@@ -0,0 +1,40 @@
+package main
+
+import "sync"
+
+// accelStreamCtl tracks which slaves the host wants to poll for accel (mirrors firmware).
+type accelStreamCtl struct {
+	mu      sync.Mutex
+	enabled map[uint32]struct{}
+}
+
+func newAccelStreamCtl() *accelStreamCtl {
+	return &accelStreamCtl{enabled: make(map[uint32]struct{})}
+}
+
+func (c *accelStreamCtl) Set(clientID uint32, on bool) {
+	c.mu.Lock()
+	defer c.mu.Unlock()
+	if on {
+		c.enabled[clientID] = struct{}{}
+	} else {
+		delete(c.enabled, clientID)
+	}
+}
+
+func (c *accelStreamCtl) Any() bool {
+	c.mu.Lock()
+	defer c.mu.Unlock()
+	return len(c.enabled) > 0
+}
+
+func (c *accelStreamCtl) SyncFromClients(clients []ClientView) {
+	c.mu.Lock()
+	defer c.mu.Unlock()
+	c.enabled = make(map[uint32]struct{})
+	for _, cl := range clients {
+		if cl.AccelStream {
+			c.enabled[cl.ID] = struct{}{}
+		}
+	}
+}

goTool/api_accel_stream.go

@@ -0,0 +1,220 @@
+package main
+
+import (
+	"encoding/json"
+	"fmt"
+	"net/http"
+	"strconv"
+
+	"powerpod/gotool/pb"
+)
+
+type accelStreamAPIRequest struct {
+	Write      bool   `json:"write"`
+	Enable     bool   `json:"enable"`
+	ClientID   uint32 `json:"client_id"`
+	AllClients bool   `json:"all_clients"`
+}
+
+type accelStreamAPIResponse struct {
+	Enabled       bool   `json:"enabled"`
+	ClientID      uint32 `json:"client_id"`
+	Success       bool   `json:"success"`
+	SlavesUpdated uint32 `json:"slaves_updated"`
+	Error         string `json:"error,omitempty"`
+}
+
+type clientAccelStreamBody struct {
+	Enable bool `json:"enable"`
+}
+
+func mountAccelStreamAPI(mux *http.ServeMux, link *managedSerial, hub *wsHub, ctl *accelStreamCtl) {
+	mux.HandleFunc("GET /api/clients/{clientID}/accel-stream", func(w http.ResponseWriter, r *http.Request) {
+		clientID, err := parsePathClientID(r)
+		if err != nil {
+			writeJSON(w, http.StatusBadRequest, accelStreamAPIResponse{Error: err.Error()})
+			return
+		}
+		serveAccelStreamGet(w, clientID, link, hub, ctl)
+	})
+	mux.HandleFunc("PUT /api/clients/{clientID}/accel-stream", func(w http.ResponseWriter, r *http.Request) {
+		clientID, err := parsePathClientID(r)
+		if err != nil {
+			writeJSON(w, http.StatusBadRequest, accelStreamAPIResponse{Error: err.Error()})
+			return
+		}
+		serveClientAccelStreamPut(w, r, clientID, link, hub, ctl)
+	})
+
+	mux.HandleFunc("/api/accel-stream", func(w http.ResponseWriter, r *http.Request) {
+		switch r.Method {
+		case http.MethodGet:
+			serveAccelStreamGetQuery(w, r, link, hub, ctl)
+		case http.MethodPost:
+			serveAccelStreamPost(w, r, link, hub, ctl)
+		default:
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+		}
+	})
+}
+
+func parsePathClientID(r *http.Request) (uint32, error) {
+	s := r.PathValue("clientID")
+	if s == "" {
+		return 0, fmt.Errorf("client_id required")
+	}
+	v, err := strconv.ParseUint(s, 10, 32)
+	if err != nil || v == 0 {
+		return 0, fmt.Errorf("invalid client_id")
+	}
+	return uint32(v), nil
+}
+
+func applyAccelStreamClient(link *managedSerial, hub *wsHub, ctl *accelStreamCtl, clientID uint32, enable bool) accelStreamAPIResponse {
+	resp, err := link.AccelStream(&pb.AccelStreamRequest{
+		Write:    true,
+		Enable:   enable,
+		ClientId: clientID,
+	})
+	if err != nil {
+		return accelStreamAPIResponse{
+			ClientID: clientID,
+			Error:    err.Error(),
+		}
+	}
+	out := accelStreamAPIResponse{
+		Enabled:       enable,
+		ClientID:      resp.GetClientId(),
+		Success:       resp.GetSuccess(),
+		SlavesUpdated: resp.GetSlavesUpdated(),
+	}
+	if resp.GetSuccess() {
+		if ctl != nil {
+			ctl.Set(clientID, enable)
+		}
+		if hub != nil {
+			hub.patchClientAccelStream(clientID, enable)
+		}
+	} else {
+		out.Enabled = resp.GetEnabled()
+	}
+	return out
+}
+
+func serveAccelStreamGet(w http.ResponseWriter, clientID uint32, link *managedSerial, hub *wsHub, ctl *accelStreamCtl) {
+	resp, err := link.AccelStreamPoll(&pb.AccelStreamRequest{
+		Write:    false,
+		ClientId: clientID,
+	})
+	if err != nil {
+		writeJSON(w, http.StatusServiceUnavailable, accelStreamAPIResponse{
+			ClientID: clientID,
+			Error:    err.Error(),
+		})
+		return
+	}
+	if ctl != nil {
+		ctl.Set(clientID, resp.GetEnabled())
+	}
+	writeJSON(w, http.StatusOK, accelStreamAPIResponse{
+		Enabled:  resp.GetEnabled(),
+		ClientID: resp.GetClientId(),
+		Success:  resp.GetSuccess(),
+	})
+}
+
+func serveAccelStreamGetQuery(w http.ResponseWriter, r *http.Request, link *managedSerial, hub *wsHub, ctl *accelStreamCtl) {
+	clientID, err := parseUintQuery(r, "client_id", 0)
+	if err != nil || clientID == 0 {
+		writeJSON(w, http.StatusBadRequest, accelStreamAPIResponse{Error: "client_id required"})
+		return
+	}
+	serveAccelStreamGet(w, clientID, link, hub, ctl)
+}
+
+func serveClientAccelStreamPut(w http.ResponseWriter, r *http.Request, clientID uint32, link *managedSerial, hub *wsHub, ctl *accelStreamCtl) {
+	var body clientAccelStreamBody
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeJSON(w, http.StatusBadRequest, accelStreamAPIResponse{Error: "invalid JSON"})
+		return
+	}
+	out := applyAccelStreamClient(link, hub, ctl, clientID, body.Enable)
+	status := http.StatusOK
+	if out.Error != "" {
+		status = http.StatusServiceUnavailable
+	} else if !out.Success {
+		status = http.StatusServiceUnavailable
+	}
+	writeJSON(w, status, out)
+}
+
+func serveAccelStreamPost(w http.ResponseWriter, r *http.Request, link *managedSerial, hub *wsHub, ctl *accelStreamCtl) {
+	var body accelStreamAPIRequest
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeJSON(w, http.StatusBadRequest, accelStreamAPIResponse{Error: "invalid JSON"})
+		return
+	}
+
+	if body.AllClients {
+		updated, err := applyAccelStreamAll(link, body.Enable)
+		if err != nil {
+			writeJSON(w, http.StatusServiceUnavailable, accelStreamAPIResponse{Error: err.Error()})
+			return
+		}
+		clients, _ := link.listClientsPoll()
+		for _, c := range clients {
+			if ctl != nil {
+				ctl.Set(c.GetId(), body.Enable)
+			}
+			if hub != nil {
+				hub.patchClientAccelStream(c.GetId(), body.Enable)
+			}
+		}
+		writeJSON(w, http.StatusOK, accelStreamAPIResponse{
+			Enabled:       body.Enable,
+			Success:       updated > 0,
+			SlavesUpdated: updated,
+		})
+		return
+	}
+
+	if body.ClientID == 0 {
+		writeJSON(w, http.StatusBadRequest, accelStreamAPIResponse{Error: "client_id required"})
+		return
+	}
+
+	out := applyAccelStreamClient(link, hub, ctl, body.ClientID, body.Enable)
+	status := http.StatusOK
+	if out.Error != "" || !out.Success {
+		status = http.StatusServiceUnavailable
+	}
+	writeJSON(w, status, out)
+}
+
+func applyAccelStreamAll(link *managedSerial, enable bool) (uint32, error) {
+	clients, err := link.listClients()
+	if err != nil {
+		return 0, err
+	}
+	var updated uint32
+	for _, c := range clients {
+		resp, err := link.AccelStream(&pb.AccelStreamRequest{
+			Write:    true,
+			Enable:   enable,
+			ClientId: c.GetId(),
+		})
+		if err != nil {
+			continue
+		}
+		if resp.GetSuccess() {
+			updated++
+		}
+	}
+	if len(clients) == 0 {
+		return 0, fmt.Errorf("no slaves registered")
+	}
+	if updated == 0 {
+		return 0, fmt.Errorf("accel stream not applied to any slave")
+	}
+	return updated, nil
+}

goTool/api_battery.go

@@ -0,0 +1,60 @@
+package main
+
+import (
+	"encoding/json"
+	"net/http"
+	"strconv"
+)
+
+func mountBatteryAPI(mux *http.ServeMux, link *managedSerial) {
+	mux.HandleFunc("/api/battery", func(w http.ResponseWriter, r *http.Request) {
+		switch r.Method {
+		case http.MethodGet:
+			serveBatteryGet(w, r, link)
+		case http.MethodPost:
+			serveBatteryPost(w, r, link)
+		default:
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+		}
+	})
+}
+
+func serveBatteryGet(w http.ResponseWriter, r *http.Request, link *managedSerial) {
+	req := batteryAPIRequest{}
+	if v := r.URL.Query().Get("all_clients"); v == "1" || v == "true" {
+		req.AllClients = true
+	}
+	if s := r.URL.Query().Get("client_id"); s != "" {
+		id, err := strconv.ParseUint(s, 10, 32)
+		if err != nil {
+			writeJSON(w, http.StatusBadRequest, batteryAPIResponse{Error: "invalid client_id"})
+			return
+		}
+		req.ClientID = uint32(id)
+	} else if !req.AllClients {
+		req.AllClients = true
+	}
+	out := applyBatteryStatus(link, req)
+	status := http.StatusOK
+	if out.Error != "" || !out.Success {
+		status = http.StatusServiceUnavailable
+	}
+	writeJSON(w, status, out)
+}
+
+func serveBatteryPost(w http.ResponseWriter, r *http.Request, link *managedSerial) {
+	var body batteryAPIRequest
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeJSON(w, http.StatusBadRequest, batteryAPIResponse{Error: "invalid JSON"})
+		return
+	}
+	if !body.AllClients && body.ClientID == 0 {
+		body.AllClients = true
+	}
+	out := applyBatteryStatus(link, body)
+	status := http.StatusOK
+	if out.Error != "" || !out.Success {
+		status = http.StatusServiceUnavailable
+	}
+	writeJSON(w, status, out)
+}

goTool/api_battery_uv.go

@@ -0,0 +1,140 @@
+package main
+
+import (
+	"encoding/json"
+	"fmt"
+	"net/http"
+
+	"powerpod/gotool/pb"
+)
+
+type batteryUvAPIRequest struct {
+	Write      bool   `json:"write"`
+	Enabled    bool   `json:"enabled"`
+	ClientID   uint32 `json:"client_id"`
+	AllClients bool   `json:"all_clients"`
+	// SlavesOnly: with all_clients, push to ESP-NOW slaves only (master NVS unchanged).
+	SlavesOnly bool `json:"slaves_only"`
+}
+
+type batteryUvAPIResponse struct {
+	ClientID      uint32 `json:"client_id"`
+	Success       bool   `json:"success"`
+	Enabled       bool   `json:"enabled"`
+	Latched       bool   `json:"latched"`
+	SlavesUpdated uint32 `json:"slaves_updated"`
+	Error         string `json:"error,omitempty"`
+}
+
+func mountBatteryUvAPI(mux *http.ServeMux, link *managedSerial) {
+	mux.HandleFunc("/api/battery-uv", func(w http.ResponseWriter, r *http.Request) {
+		switch r.Method {
+		case http.MethodGet:
+			serveBatteryUvGet(w, r, link)
+		case http.MethodPost:
+			serveBatteryUvPost(w, r, link)
+		default:
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+		}
+	})
+}
+
+func serveBatteryUvGet(w http.ResponseWriter, r *http.Request, link *managedSerial) {
+	clientID, err := parseUintQuery(r, "client_id", 0)
+	if err != nil {
+		writeJSON(w, http.StatusBadRequest, batteryUvAPIResponse{Error: err.Error()})
+		return
+	}
+	resp, err := link.BatteryUv(&pb.BatteryUvRequest{
+		Write:    false,
+		ClientId: clientID,
+	})
+	if err != nil {
+		writeJSON(w, http.StatusServiceUnavailable, batteryUvAPIResponse{
+			ClientID: clientID,
+			Error:    err.Error(),
+		})
+		return
+	}
+	writeJSON(w, http.StatusOK, batteryUvAPIResponse{
+		ClientID:      resp.GetClientId(),
+		Success:       resp.GetSuccess(),
+		Enabled:       resp.GetEnabled(),
+		Latched:       resp.GetLatched(),
+		SlavesUpdated: resp.GetSlavesUpdated(),
+	})
+}
+
+func serveBatteryUvPost(w http.ResponseWriter, r *http.Request, link *managedSerial) {
+	var body batteryUvAPIRequest
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeJSON(w, http.StatusBadRequest, batteryUvAPIResponse{Error: "invalid JSON"})
+		return
+	}
+	if body.AllClients && body.SlavesOnly {
+		updated, err := applyBatteryUvToSlaves(link, body.Enabled)
+		if err != nil {
+			writeJSON(w, http.StatusServiceUnavailable, batteryUvAPIResponse{
+				Enabled: body.Enabled,
+				Error:   err.Error(),
+			})
+			return
+		}
+		writeJSON(w, http.StatusOK, batteryUvAPIResponse{
+			Success:       updated > 0,
+			Enabled:       body.Enabled,
+			SlavesUpdated: updated,
+		})
+		return
+	}
+
+	resp, err := link.BatteryUv(&pb.BatteryUvRequest{
+		Write:      true,
+		Enabled:    body.Enabled,
+		ClientId:   body.ClientID,
+		AllClients: body.AllClients,
+	})
+	if err != nil {
+		writeJSON(w, http.StatusServiceUnavailable, batteryUvAPIResponse{
+			ClientID: body.ClientID,
+			Enabled:  body.Enabled,
+			Error:    err.Error(),
+		})
+		return
+	}
+	writeJSON(w, http.StatusOK, batteryUvAPIResponse{
+		ClientID:      resp.GetClientId(),
+		Success:       resp.GetSuccess(),
+		Enabled:       resp.GetEnabled(),
+		Latched:       resp.GetLatched(),
+		SlavesUpdated: resp.GetSlavesUpdated(),
+	})
+}
+
+func applyBatteryUvToSlaves(link *managedSerial, enabled bool) (uint32, error) {
+	clients, err := link.listClients()
+	if err != nil {
+		return 0, err
+	}
+	var updated uint32
+	for _, c := range clients {
+		resp, err := link.BatteryUv(&pb.BatteryUvRequest{
+			Write:    true,
+			Enabled:  enabled,
+			ClientId: c.GetId(),
+		})
+		if err != nil {
+			continue
+		}
+		if resp.GetSuccess() {
+			updated++
+		}
+	}
+	if len(clients) == 0 {
+		return 0, fmt.Errorf("no slaves registered")
+	}
+	if updated == 0 {
+		return 0, fmt.Errorf("UV protection not applied to any slave")
+	}
+	return updated, nil
+}

goTool/api_ble_measure.go

@@ -0,0 +1,129 @@
+package main
+
+import (
+	"encoding/json"
+	"errors"
+	"io"
+	"net/http"
+	"time"
+)
+
+type bleRttAPIRequest struct {
+	Count   *int     `json:"count"`
+	Warmup  *int     `json:"warmup"`
+	SettleS *float64 `json:"settle_s"`
+}
+
+type bleStreamAPIRequest struct {
+	ClientID *uint32  `json:"client_id"`
+	PeriodMs *uint32  `json:"period_ms"`
+	Count    *int     `json:"count"`
+	TolMs    *float64 `json:"tol_ms"`
+	TimeoutS *float64 `json:"timeout_s"`
+}
+
+func mountBleTestAPI(mux *http.ServeMux, link *managedHost) {
+	mux.HandleFunc("/api/ble-rtt", func(w http.ResponseWriter, r *http.Request) {
+		if r.Method != http.MethodPost {
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+			return
+		}
+		serveBleRtt(w, r, link)
+	})
+	mux.HandleFunc("/api/ble-stream", func(w http.ResponseWriter, r *http.Request) {
+		if r.Method != http.MethodPost {
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+			return
+		}
+		serveBleStreamTest(w, r, link)
+	})
+}
+
+func requireBLEHost(w http.ResponseWriter, link *managedHost) bool {
+	if link.Transport() != hostTransportBLE || !link.IsConnected() {
+		writeJSON(w, http.StatusBadRequest, bleRttResult{
+			Error: "BLE host required (connect via BLE, DIP8=1)",
+		})
+		return false
+	}
+	return true
+}
+
+func serveBleRtt(w http.ResponseWriter, r *http.Request, link *managedHost) {
+	if !requireBLEHost(w, link) {
+		return
+	}
+	var body bleRttAPIRequest
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil && !errors.Is(err, io.EOF) {
+		writeJSON(w, http.StatusBadRequest, bleRttResult{Error: "invalid JSON"})
+		return
+	}
+	count, warmup := 50, 5
+	settle := 0.0
+	if body.Count != nil {
+		count = *body.Count
+	}
+	if body.Warmup != nil {
+		warmup = *body.Warmup
+	}
+	if body.SettleS != nil {
+		settle = *body.SettleS
+	}
+
+	if !link.beginPausePoll() {
+		writeJSON(w, http.StatusConflict, bleRttResult{Error: "host busy"})
+		return
+	}
+	defer link.endPausePoll()
+
+	out := measureBleRtt(link, count, warmup, time.Duration(settle*float64(time.Second)))
+	status := http.StatusOK
+	if !out.Success {
+		status = http.StatusBadRequest
+	}
+	writeJSON(w, status, out)
+}
+
+func serveBleStreamTest(w http.ResponseWriter, r *http.Request, link *managedHost) {
+	if !requireBLEHost(w, link) {
+		return
+	}
+	var body bleStreamAPIRequest
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil && !errors.Is(err, io.EOF) {
+		writeJSON(w, http.StatusBadRequest, bleStreamResult{Error: "invalid JSON"})
+		return
+	}
+	count := 50
+	periodMs := uint32(10)
+	tolMs := 2.0
+	timeoutS := 15.0
+	var clientID uint32
+	if body.Count != nil {
+		count = *body.Count
+	}
+	if body.PeriodMs != nil {
+		periodMs = *body.PeriodMs
+	}
+	if body.TolMs != nil {
+		tolMs = *body.TolMs
+	}
+	if body.TimeoutS != nil {
+		timeoutS = *body.TimeoutS
+	}
+	if body.ClientID != nil {
+		clientID = *body.ClientID
+	}
+
+	if !link.beginPausePoll() {
+		writeJSON(w, http.StatusConflict, bleStreamResult{Error: "host busy"})
+		return
+	}
+	defer link.endPausePoll()
+
+	out := measureBleStream(link, clientID, periodMs, count, tolMs, timeoutS)
+	status := http.StatusOK
+	if !out.Success {
+		status = http.StatusBadRequest
+	}
+	writeJSON(w, status, out)
+}

goTool/api_host.go

@@ -0,0 +1,140 @@
+package main
+
+import (
+	"encoding/json"
+	"net/http"
+	"time"
+)
+
+type hostAPIResponse struct {
+	Transport string `json:"transport"`
+	Endpoint  string `json:"endpoint"`
+	Connected bool   `json:"connected"`
+	BleName   string `json:"ble_name,omitempty"`
+	Error     string `json:"error,omitempty"`
+}
+
+type hostConnectRequest struct {
+	Transport string `json:"transport"` // uart|ble
+	Port      string `json:"port,omitempty"`
+	Address   string `json:"address,omitempty"`
+	Name      string `json:"name,omitempty"`
+	Baud      int    `json:"baud,omitempty"`
+}
+
+type bleScanRequest struct {
+	TimeoutS   float64 `json:"timeout_s"`
+	NameFilter string  `json:"name_filter"`
+}
+
+type bleScanResponse struct {
+	Devices []bleScanDevice `json:"devices"`
+	Error   string          `json:"error,omitempty"`
+}
+
+type serialPortsResponse struct {
+	Ports []string `json:"ports"`
+	Error string   `json:"error,omitempty"`
+}
+
+func mountHostAPI(mux *http.ServeMux, link *managedHost) {
+	mux.HandleFunc("/api/host", func(w http.ResponseWriter, r *http.Request) {
+		if r.Method != http.MethodGet {
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+			return
+		}
+		st := link.HostStatus()
+		writeJSON(w, http.StatusOK, hostAPIResponse{
+			Transport: st["transport"].(string),
+			Endpoint:  st["endpoint"].(string),
+			Connected: st["connected"].(bool),
+			BleName:   st["ble_name"].(string),
+		})
+	})
+
+	mux.HandleFunc("/api/host/connect", func(w http.ResponseWriter, r *http.Request) {
+		if r.Method != http.MethodPost {
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+			return
+		}
+		var body hostConnectRequest
+		if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+			writeJSON(w, http.StatusBadRequest, hostAPIResponse{Error: "invalid JSON"})
+			return
+		}
+		var err error
+		switch body.Transport {
+		case hostTransportUART:
+			err = link.ConnectUART(body.Port, body.Baud)
+		case hostTransportBLE:
+			err = link.ConnectBLE(body.Address, body.Name)
+		default:
+			writeJSON(w, http.StatusBadRequest, hostAPIResponse{Error: "transport must be uart or ble"})
+			return
+		}
+		st := link.HostStatus()
+		resp := hostAPIResponse{
+			Transport: st["transport"].(string),
+			Endpoint:  st["endpoint"].(string),
+			Connected: st["connected"].(bool),
+			BleName:   st["ble_name"].(string),
+		}
+		if err != nil {
+			resp.Error = err.Error()
+			resp.Connected = false
+			writeJSON(w, http.StatusBadRequest, resp)
+			return
+		}
+		writeJSON(w, http.StatusOK, resp)
+	})
+
+	mux.HandleFunc("/api/host/disconnect", func(w http.ResponseWriter, r *http.Request) {
+		if r.Method != http.MethodPost {
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+			return
+		}
+		_ = link.Disconnect()
+		st := link.HostStatus()
+		writeJSON(w, http.StatusOK, hostAPIResponse{
+			Transport: st["transport"].(string),
+			Endpoint:  st["endpoint"].(string),
+			Connected: false,
+		})
+	})
+
+	mux.HandleFunc("/api/serial/ports", func(w http.ResponseWriter, r *http.Request) {
+		if r.Method != http.MethodGet {
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+			return
+		}
+		ports, err := listSerialPorts()
+		if err != nil {
+			writeJSON(w, http.StatusOK, serialPortsResponse{Ports: []string{}, Error: err.Error()})
+			return
+		}
+		writeJSON(w, http.StatusOK, serialPortsResponse{Ports: ports})
+	})
+
+	mux.HandleFunc("/api/ble/scan", func(w http.ResponseWriter, r *http.Request) {
+		if r.Method != http.MethodPost {
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+			return
+		}
+		var body bleScanRequest
+		_ = json.NewDecoder(r.Body).Decode(&body)
+		timeout := time.Duration(body.TimeoutS * float64(time.Second))
+		if timeout <= 0 {
+			timeout = 5 * time.Second
+		}
+		// Disconnect active BLE before scan (BlueZ adapter contention).
+		if link.Transport() == hostTransportBLE {
+			_ = link.Disconnect()
+		}
+		devs, err := scanBLEDevices(timeout, body.NameFilter)
+		if err != nil {
+			writeJSON(w, http.StatusOK, bleScanResponse{Devices: []bleScanDevice{}, Error: err.Error()})
+			return
+		}
+		writeJSON(w, http.StatusOK, bleScanResponse{Devices: devs})
+	})
+}

goTool/api_input_send_mode.go

@@ -0,0 +1,100 @@
+package main
+
+import (
+	"encoding/json"
+	"net/http"
+
+	pb "powerpod/gotool/pb"
+)
+
+type inputSendModeAPIResponse struct {
+	Success       bool   `json:"success"`
+	Mode          uint32 `json:"mode"`
+	ModeName      string `json:"mode_name"`
+	ClientID      uint32 `json:"client_id,omitempty"`
+	SlavesUpdated uint32 `json:"slaves_updated,omitempty"`
+	Error         string `json:"error,omitempty"`
+}
+
+func inputSendModeName(mode pb.InputSendMode) string {
+	switch mode {
+	case pb.InputSendMode_INPUT_SEND_BEST_EFFORT:
+		return "best_effort"
+	case pb.InputSendMode_INPUT_SEND_FAST:
+		return "fast"
+	case pb.InputSendMode_INPUT_SEND_WAIT:
+		return "wait"
+	case pb.InputSendMode_INPUT_SEND_RELIABLE:
+		return "reliable"
+	default:
+		return "unknown"
+	}
+}
+
+func mountInputSendModeAPI(mux *http.ServeMux, link *managedSerial) {
+	mux.HandleFunc("/api/input-send-mode", func(w http.ResponseWriter, r *http.Request) {
+		switch r.Method {
+		case http.MethodGet:
+			serveInputSendModeGet(w, link)
+		case http.MethodPut, http.MethodPost:
+			serveInputSendModePut(w, r, link)
+		default:
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+		}
+	})
+}
+
+func serveInputSendModeGet(w http.ResponseWriter, link *managedSerial) {
+	resp, err := link.InputSendMode(&pb.InputSendModeRequest{Write: false})
+	if err != nil {
+		writeJSON(w, http.StatusBadGateway, inputSendModeAPIResponse{Error: err.Error()})
+		return
+	}
+	writeJSON(w, http.StatusOK, inputSendModeAPIResponse{
+		Success:  resp.GetSuccess(),
+		Mode:     uint32(resp.GetMode()),
+		ModeName: inputSendModeName(resp.GetMode()),
+	})
+}
+
+func serveInputSendModePut(w http.ResponseWriter, r *http.Request, link *managedSerial) {
+	var body struct {
+		Mode       uint32 `json:"mode"`
+		ClientID   uint32 `json:"client_id"`
+		AllClients bool   `json:"all_clients"`
+	}
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeJSON(w, http.StatusBadRequest, inputSendModeAPIResponse{Error: "invalid JSON"})
+		return
+	}
+	if body.Mode > uint32(pb.InputSendMode_INPUT_SEND_RELIABLE) {
+		writeJSON(w, http.StatusBadRequest, inputSendModeAPIResponse{Error: "mode must be 0..3"})
+		return
+	}
+	if !body.AllClients && body.ClientID == 0 {
+		// Dashboard default: apply to every registered slave.
+		body.AllClients = true
+	}
+
+	resp, err := link.InputSendMode(&pb.InputSendModeRequest{
+		Write:      true,
+		Mode:       pb.InputSendMode(body.Mode),
+		ClientId:   body.ClientID,
+		AllClients: body.AllClients,
+	})
+	if err != nil {
+		writeJSON(w, http.StatusBadGateway, inputSendModeAPIResponse{Error: err.Error()})
+		return
+	}
+	status := http.StatusOK
+	if !resp.GetSuccess() {
+		status = http.StatusBadRequest
+	}
+	writeJSON(w, status, inputSendModeAPIResponse{
+		Success:       resp.GetSuccess(),
+		Mode:          uint32(resp.GetMode()),
+		ModeName:      inputSendModeName(resp.GetMode()),
+		ClientID:      resp.GetClientId(),
+		SlavesUpdated: resp.GetSlavesUpdated(),
+	})
+}

goTool/api_led_ring.go

@@ -0,0 +1,36 @@
+package main
+
+import (
+	"encoding/json"
+	"net/http"
+)
+
+func mountLedRingAPI(mux *http.ServeMux, link *managedSerial) {
+	mux.HandleFunc("/api/led-ring", func(w http.ResponseWriter, r *http.Request) {
+		if r.Method != http.MethodPost {
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+			return
+		}
+		serveLedRingPost(w, r, link)
+	})
+}
+
+func serveLedRingPost(w http.ResponseWriter, r *http.Request, link *managedSerial) {
+	var body ledRingAPIRequest
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeJSON(w, http.StatusBadRequest, ledRingAPIResponse{Error: "invalid JSON"})
+		return
+	}
+	if body.Mode == "" {
+		writeJSON(w, http.StatusBadRequest, ledRingAPIResponse{Error: "mode required"})
+		return
+	}
+	out := applyLedRing(link, body)
+	status := http.StatusOK
+	if out.Error != "" {
+		status = http.StatusServiceUnavailable
+	} else if !out.Success {
+		status = http.StatusServiceUnavailable
+	}
+	writeJSON(w, status, out)
+}

goTool/api_live_stream.go

@@ -0,0 +1,52 @@
+package main
+
+import (
+	"encoding/json"
+	"net/http"
+)
+
+type liveStreamAPIResponse struct {
+	Enabled bool   `json:"enabled"`
+	Success bool   `json:"success"`
+	Error   string `json:"error,omitempty"`
+}
+
+func mountLiveStreamAPI(mux *http.ServeMux, hub *wsHub) {
+	mux.HandleFunc("/api/live-stream", func(w http.ResponseWriter, r *http.Request) {
+		switch r.Method {
+		case http.MethodGet:
+			serveLiveStreamGet(w, hub)
+		case http.MethodPut:
+			serveLiveStreamPut(w, r, hub)
+		default:
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+		}
+	})
+}
+
+func serveLiveStreamGet(w http.ResponseWriter, hub *wsHub) {
+	enabled := false
+	if hub != nil {
+		enabled = hub.liveStreamEnabled()
+	}
+	writeJSON(w, http.StatusOK, liveStreamAPIResponse{Enabled: enabled, Success: true})
+}
+
+func serveLiveStreamPut(w http.ResponseWriter, r *http.Request, hub *wsHub) {
+	var body struct {
+		Enable bool `json:"enable"`
+	}
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeJSON(w, http.StatusBadRequest, liveStreamAPIResponse{Error: "invalid JSON"})
+		return
+	}
+
+	if hub != nil {
+		hub.patchLiveStream(body.Enable)
+	}
+
+	writeJSON(w, http.StatusOK, liveStreamAPIResponse{
+		Enabled: body.Enable,
+		Success: true,
+	})
+}

goTool/api_serve.go

@@ -2,6 +2,7 @@ package main
 
 import (
 	"encoding/json"
+	"errors"
 	"fmt"
 	"io"
 	"net/http"
@@ -40,14 +41,73 @@ type unicastAPIResponse struct {
 	Error   string `json:"error,omitempty"`
 }
 
-type otaAPIResponse struct {
-	Success       bool   `json:"success"`
-	BytesWritten  uint32 `json:"bytes_written,omitempty"`
-	TargetSlot    uint32 `json:"target_slot,omitempty"`
-	Error         string `json:"error,omitempty"`
+type echoPingAPIRequest struct {
+	ClientID uint32 `json:"client_id"`
 }
 
-func mountServeAPI(mux *http.ServeMux, link *managedSerial, hub *wsHub) {
+type echoPingAPIResponse struct {
+	Success     bool    `json:"success"`
+	ClientID    uint32  `json:"client_id,omitempty"`
+	TimestampUs uint64  `json:"timestamp_us,omitempty"`
+	RttMs       float64 `json:"rtt_ms"`
+	EspRttUs    uint32  `json:"esp_rtt_us"`
+	Error       string  `json:"error,omitempty"`
+}
+
+type findMeAPIRequest struct {
+	ClientID uint32 `json:"client_id"`
+}
+
+type findMeAPIResponse struct {
+	Success  bool   `json:"success"`
+	ClientID uint32 `json:"client_id,omitempty"`
+	Error    string `json:"error,omitempty"`
+}
+
+type resetIdMapAPIResponse struct {
+	Success bool   `json:"success"`
+	Error   string `json:"error,omitempty"`
+}
+
+type restartAPIRequest struct {
+	ClientID uint32 `json:"client_id"`
+}
+
+type restartAPIResponse struct {
+	Success  bool   `json:"success"`
+	ClientID uint32 `json:"client_id,omitempty"`
+	Error    string `json:"error,omitempty"`
+}
+
+type logLevelAPIResponse struct {
+	Success bool   `json:"success"`
+	Level   uint32 `json:"level"`
+	Error   string `json:"error,omitempty"`
+}
+
+type logLevelAPIRequest struct {
+	Write bool   `json:"write"`
+	Level uint32 `json:"level"`
+}
+
+type otaAPIResponse struct {
+	Success      bool   `json:"success"`
+	BytesWritten uint32 `json:"bytes_written,omitempty"`
+	TargetSlot   uint32 `json:"target_slot,omitempty"`
+	Error        string `json:"error,omitempty"`
+}
+
+func mountServeAPI(mux *http.ServeMux, link *managedSerial, hub *wsHub, streamCtl *accelStreamCtl, tapCtl *tapNotifyCtl) {
+	mountHostAPI(mux, link)
+	mountBleTestAPI(mux, link)
+	mountLiveStreamAPI(mux, hub)
+	mountAccelStreamAPI(mux, link, hub, streamCtl)
+	mountInputSendModeAPI(mux, link)
+	mountTapAPI(mux, link, hub, tapCtl)
+	mountTapConfigAPI(mux, link)
+	mountBatteryUvAPI(mux, link)
+	mountLedRingAPI(mux, link)
+	mountBatteryAPI(mux, link)
 	mux.HandleFunc("/api/deadzone", func(w http.ResponseWriter, r *http.Request) {
 		switch r.Method {
 		case http.MethodGet:
@@ -65,6 +125,40 @@ func mountServeAPI(mux *http.ServeMux, link *managedSerial, hub *wsHub) {
 		}
 		serveUnicastTest(w, r, link)
 	})
+	mux.HandleFunc("/api/echo-ping", func(w http.ResponseWriter, r *http.Request) {
+		if r.Method != http.MethodPost {
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+			return
+		}
+		serveEchoPing(w, r, link)
+	})
+	mux.HandleFunc("/api/find-me", func(w http.ResponseWriter, r *http.Request) {
+		if r.Method != http.MethodPost {
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+			return
+		}
+		serveFindMe(w, r, link)
+	})
+	mux.HandleFunc("/api/restart", func(w http.ResponseWriter, r *http.Request) {
+		if r.Method != http.MethodPost {
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+			return
+		}
+		serveRestart(w, r, link)
+	})
+	mux.HandleFunc("POST /api/clients/reset-id-map", func(w http.ResponseWriter, r *http.Request) {
+		serveResetClientIdMap(w, r, link)
+	})
+	mux.HandleFunc("/api/log-level", func(w http.ResponseWriter, r *http.Request) {
+		switch r.Method {
+		case http.MethodGet:
+			serveLogLevelGet(w, r, link)
+		case http.MethodPost:
+			serveLogLevelPost(w, r, link)
+		default:
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+		}
+	})
 	mux.HandleFunc("/api/ota", func(w http.ResponseWriter, r *http.Request) {
 		if r.Method != http.MethodPost {
 			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
@@ -75,6 +169,10 @@ func mountServeAPI(mux *http.ServeMux, link *managedSerial, hub *wsHub) {
 }
 
 func serveOTAUpload(w http.ResponseWriter, r *http.Request, link *managedSerial, hub *wsHub) {
+	if !link.IsConnected() {
+		writeJSON(w, http.StatusBadRequest, otaAPIResponse{Error: "host not connected"})
+		return
+	}
 	if err := r.ParseMultipartForm(otaMaxFirmwareSize); err != nil {
 		writeJSON(w, http.StatusBadRequest, otaAPIResponse{Error: "invalid form"})
 		return
@@ -107,7 +205,11 @@ func serveOTAUpload(w http.ResponseWriter, r *http.Request, link *managedSerial,
 		if hub != nil {
 			hub.broadcastRaw(OTAProgress{Type: "ota_progress", Phase: "error", Message: err.Error()})
 		}
-		writeJSON(w, http.StatusServiceUnavailable, otaAPIResponse{Error: err.Error()})
+		status := http.StatusServiceUnavailable
+		if errors.Is(err, errOTAInProgress) {
+			status = http.StatusConflict
+		}
+		writeJSON(w, status, otaAPIResponse{Error: err.Error()})
 		return
 	}
 	writeJSON(w, http.StatusOK, otaAPIResponse{
@@ -216,6 +318,92 @@ func applyDeadzoneToSlaves(link *managedSerial, deadzone uint32) (uint32, error)
 	return updated, nil
 }
 
+func serveLogLevelGet(w http.ResponseWriter, r *http.Request, link *managedSerial) {
+	resp, err := link.SetLogLevel(false, 0)
+	if err != nil {
+		writeJSON(w, http.StatusServiceUnavailable, logLevelAPIResponse{Error: err.Error()})
+		return
+	}
+	writeJSON(w, http.StatusOK, logLevelAPIResponse{
+		Success: resp.GetSuccess(),
+		Level:   resp.GetLevel(),
+	})
+}
+
+func serveLogLevelPost(w http.ResponseWriter, r *http.Request, link *managedSerial) {
+	var body logLevelAPIRequest
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeJSON(w, http.StatusBadRequest, logLevelAPIResponse{Error: "invalid JSON"})
+		return
+	}
+	if !body.Write {
+		writeJSON(w, http.StatusBadRequest, logLevelAPIResponse{Error: "write must be true"})
+		return
+	}
+	if body.Level > 5 {
+		writeJSON(w, http.StatusBadRequest, logLevelAPIResponse{Error: "level must be 0–5"})
+		return
+	}
+	resp, err := link.SetLogLevel(true, body.Level)
+	if err != nil {
+		writeJSON(w, http.StatusServiceUnavailable, logLevelAPIResponse{Error: err.Error()})
+		return
+	}
+	writeJSON(w, http.StatusOK, logLevelAPIResponse{
+		Success: resp.GetSuccess(),
+		Level:   resp.GetLevel(),
+	})
+}
+
+func serveRestart(w http.ResponseWriter, r *http.Request, link *managedSerial) {
+	var body restartAPIRequest
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeJSON(w, http.StatusBadRequest, restartAPIResponse{Error: "invalid JSON"})
+		return
+	}
+	if err := link.Restart(body.ClientID); err != nil {
+		writeJSON(w, http.StatusServiceUnavailable, restartAPIResponse{
+			ClientID: body.ClientID,
+			Error:    err.Error(),
+		})
+		return
+	}
+	writeJSON(w, http.StatusOK, restartAPIResponse{Success: true, ClientID: body.ClientID})
+}
+
+func serveResetClientIdMap(w http.ResponseWriter, r *http.Request, link *managedSerial) {
+	if !link.IsConnected() {
+		writeJSON(w, http.StatusServiceUnavailable, resetIdMapAPIResponse{Error: "host not connected"})
+		return
+	}
+	resp, err := link.resetClientIdMap()
+	if err != nil {
+		writeJSON(w, http.StatusServiceUnavailable, resetIdMapAPIResponse{Error: err.Error()})
+		return
+	}
+	if !resp.GetSuccess() {
+		writeJSON(w, http.StatusOK, resetIdMapAPIResponse{Success: false, Error: "rejected by device"})
+		return
+	}
+	writeJSON(w, http.StatusOK, resetIdMapAPIResponse{Success: true})
+}
+
+func serveFindMe(w http.ResponseWriter, r *http.Request, link *managedSerial) {
+	var body findMeAPIRequest
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeJSON(w, http.StatusBadRequest, findMeAPIResponse{Error: "invalid JSON"})
+		return
+	}
+	if err := link.FindMe(body.ClientID); err != nil {
+		writeJSON(w, http.StatusServiceUnavailable, findMeAPIResponse{
+			ClientID: body.ClientID,
+			Error:    err.Error(),
+		})
+		return
+	}
+	writeJSON(w, http.StatusOK, findMeAPIResponse{Success: true, ClientID: body.ClientID})
+}
+
 func serveUnicastTest(w http.ResponseWriter, r *http.Request, link *managedSerial) {
 	var body unicastAPIRequest
 	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
@@ -240,6 +428,30 @@ func serveUnicastTest(w http.ResponseWriter, r *http.Request, link *managedSeria
 	})
 }
 
+func serveEchoPing(w http.ResponseWriter, r *http.Request, link *managedSerial) {
+	var body echoPingAPIRequest
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeJSON(w, http.StatusBadRequest, echoPingAPIResponse{Error: "invalid JSON"})
+		return
+	}
+	if body.ClientID == 0 {
+		writeJSON(w, http.StatusBadRequest, echoPingAPIResponse{Error: "client_id required"})
+		return
+	}
+	result, err := link.EchoPing(body.ClientID)
+	if err != nil {
+		writeJSON(w, http.StatusServiceUnavailable, echoPingAPIResponse{Error: err.Error()})
+		return
+	}
+	writeJSON(w, http.StatusOK, echoPingAPIResponse{
+		Success:     result.Success,
+		ClientID:    result.ClientID,
+		TimestampUs: result.TimestampUs,
+		RttMs:       result.RttMs,
+		EspRttUs:    result.EspRttUs,
+	})
+}
+
 func parseUintQuery(r *http.Request, key string, def uint32) (uint32, error) {
 	s := r.URL.Query().Get(key)
 	if s == "" {

goTool/api_tap.go

@@ -0,0 +1,219 @@
+package main
+
+import (
+	"encoding/json"
+	"fmt"
+	"net/http"
+
+	"powerpod/gotool/pb"
+)
+
+type tapNotifyAPIRequest struct {
+	Write      bool   `json:"write"`
+	ClientID   uint32 `json:"client_id"`
+	AllClients bool   `json:"all_clients"`
+	Single     bool   `json:"single"`
+	DoubleTap  bool   `json:"double_tap"`
+	Triple     bool   `json:"triple"`
+}
+
+type tapNotifyAPIResponse struct {
+	ClientID      uint32 `json:"client_id"`
+	Success       bool   `json:"success"`
+	SlavesUpdated uint32 `json:"slaves_updated"`
+	Single        bool   `json:"single"`
+	DoubleTap     bool   `json:"double_tap"`
+	Triple        bool   `json:"triple"`
+	Error         string `json:"error,omitempty"`
+}
+
+type tapSnapshotAPIResponse struct {
+	Events []tapEventView `json:"events"`
+	Error  string         `json:"error,omitempty"`
+}
+
+type tapEventView struct {
+	ClientID uint32 `json:"client_id"`
+	Kind     string `json:"kind"`
+	AgeMs    uint32 `json:"age_ms"`
+}
+
+func mountTapAPI(mux *http.ServeMux, link *managedSerial, hub *wsHub, tapCtl *tapNotifyCtl) {
+	mux.HandleFunc("GET /api/clients/{clientID}/tap-notify", func(w http.ResponseWriter, r *http.Request) {
+		clientID, err := parsePathClientID(r)
+		if err != nil {
+			writeJSON(w, http.StatusBadRequest, tapNotifyAPIResponse{Error: err.Error()})
+			return
+		}
+		serveTapNotifyGet(w, clientID, link)
+	})
+	mux.HandleFunc("PUT /api/clients/{clientID}/tap-notify", func(w http.ResponseWriter, r *http.Request) {
+		clientID, err := parsePathClientID(r)
+		if err != nil {
+			writeJSON(w, http.StatusBadRequest, tapNotifyAPIResponse{Error: err.Error()})
+			return
+		}
+		serveClientTapNotifyPut(w, r, clientID, link, hub, tapCtl)
+	})
+	mux.HandleFunc("/api/tap-notify", func(w http.ResponseWriter, r *http.Request) {
+		switch r.Method {
+		case http.MethodGet:
+			serveTapNotifyGetQuery(w, r, link)
+		case http.MethodPost:
+			serveTapNotifyPost(w, r, link, hub, tapCtl)
+		default:
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+		}
+	})
+
+	mux.HandleFunc("/api/tap-snapshot", func(w http.ResponseWriter, r *http.Request) {
+		if r.Method != http.MethodGet {
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+			return
+		}
+		serveTapSnapshotGet(w, r, link)
+	})
+}
+
+func applyTapNotifyClient(link *managedSerial, hub *wsHub, tapCtl *tapNotifyCtl, clientID uint32, single, doubleTap, triple bool) tapNotifyAPIResponse {
+	return applyTapNotifyClientWS(link, hub, tapCtl, clientID, single, doubleTap, triple)
+}
+
+func serveTapNotifyGet(w http.ResponseWriter, clientID uint32, link *managedSerial) {
+	resp, err := link.TapNotifyPoll(&pb.TapNotifyRequest{
+		Write:    false,
+		ClientId: clientID,
+	})
+	if err != nil {
+		writeJSON(w, http.StatusServiceUnavailable, tapNotifyAPIResponse{
+			ClientID: clientID,
+			Error:    err.Error(),
+		})
+		return
+	}
+	writeJSON(w, http.StatusOK, tapNotifyAPIResponse{
+		ClientID: resp.GetClientId(),
+		Success:  resp.GetSuccess(),
+		Single:   resp.GetSingle(),
+		DoubleTap: resp.GetDoubleTap(),
+		Triple:   resp.GetTriple(),
+	})
+}
+
+func serveTapNotifyGetQuery(w http.ResponseWriter, r *http.Request, link *managedSerial) {
+	clientID, err := parseUintQuery(r, "client_id", 0)
+	if err != nil || clientID == 0 {
+		writeJSON(w, http.StatusBadRequest, tapNotifyAPIResponse{Error: "client_id required"})
+		return
+	}
+	serveTapNotifyGet(w, clientID, link)
+}
+
+type clientTapNotifyBody struct {
+	Single    bool `json:"single"`
+	DoubleTap bool `json:"double_tap"`
+	Triple    bool `json:"triple"`
+}
+
+func serveClientTapNotifyPut(w http.ResponseWriter, r *http.Request, clientID uint32, link *managedSerial, hub *wsHub, tapCtl *tapNotifyCtl) {
+	var body clientTapNotifyBody
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeJSON(w, http.StatusBadRequest, tapNotifyAPIResponse{Error: "invalid JSON"})
+		return
+	}
+	out := applyTapNotifyClient(link, hub, tapCtl, clientID, body.Single, body.DoubleTap, body.Triple)
+	status := http.StatusOK
+	if out.Error != "" || !out.Success {
+		status = http.StatusServiceUnavailable
+	}
+	writeJSON(w, status, out)
+}
+
+func serveTapNotifyPost(w http.ResponseWriter, r *http.Request, link *managedSerial, hub *wsHub, tapCtl *tapNotifyCtl) {
+	var body tapNotifyAPIRequest
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeJSON(w, http.StatusBadRequest, tapNotifyAPIResponse{Error: "invalid JSON"})
+		return
+	}
+
+	if body.AllClients {
+		updated, err := applyTapNotifyAll(link, hub, tapCtl, body.Single, body.DoubleTap, body.Triple)
+		if err != nil {
+			writeJSON(w, http.StatusServiceUnavailable, tapNotifyAPIResponse{Error: err.Error()})
+			return
+		}
+		writeJSON(w, http.StatusOK, tapNotifyAPIResponse{
+			Success:       updated > 0,
+			SlavesUpdated: updated,
+			Single:        body.Single,
+			DoubleTap:     body.DoubleTap,
+			Triple:        body.Triple,
+		})
+		return
+	}
+
+	if body.ClientID == 0 {
+		writeJSON(w, http.StatusBadRequest, tapNotifyAPIResponse{Error: "client_id required"})
+		return
+	}
+
+	out := applyTapNotifyClient(link, hub, tapCtl, body.ClientID, body.Single, body.DoubleTap, body.Triple)
+	status := http.StatusOK
+	if out.Error != "" || !out.Success {
+		status = http.StatusServiceUnavailable
+	}
+	writeJSON(w, status, out)
+}
+
+func applyTapNotifyAll(link *managedSerial, hub *wsHub, tapCtl *tapNotifyCtl, single, doubleTap, triple bool) (uint32, error) {
+	resp, err := link.TapNotify(&pb.TapNotifyRequest{
+		Write:      true,
+		AllClients: true,
+		Single:     single,
+		DoubleTap:  doubleTap,
+		Triple:     triple,
+	})
+	if err != nil {
+		return 0, err
+	}
+	if !resp.GetSuccess() {
+		return 0, fmt.Errorf("tap notify not applied to any slave")
+	}
+	if hub != nil || tapCtl != nil {
+		clients, _ := link.listClientsPoll()
+		for _, c := range clients {
+			if tapCtl != nil {
+				tapCtl.Set(c.GetId(), single, doubleTap, triple)
+			}
+			if hub != nil {
+				hub.patchClientTapNotify(c.GetId(), single, doubleTap, triple)
+			}
+		}
+	}
+	return resp.GetSlavesUpdated(), nil
+}
+
+func serveTapSnapshotGet(w http.ResponseWriter, r *http.Request, link *managedSerial) {
+	clientID, err := parseUintQuery(r, "client_id", 0)
+	if err != nil {
+		writeJSON(w, http.StatusBadRequest, tapSnapshotAPIResponse{Error: err.Error()})
+		return
+	}
+	cache, err := link.readCacheStatusPoll()
+	if err != nil {
+		writeJSON(w, http.StatusServiceUnavailable, tapSnapshotAPIResponse{Error: err.Error()})
+		return
+	}
+	out := tapSnapshotAPIResponse{Events: make([]tapEventView, 0)}
+	for _, e := range tapEventsFromCacheStatus(cache) {
+		if clientID != 0 && e.GetClientId() != clientID {
+			continue
+		}
+		out.Events = append(out.Events, tapEventView{
+			ClientID: e.GetClientId(),
+			Kind:     tapKindLabel(e.GetKind()),
+			AgeMs:    e.GetAgeMs(),
+		})
+	}
+	writeJSON(w, http.StatusOK, out)
+}

goTool/api_tap_config.go

@@ -0,0 +1,171 @@
+package main
+
+import (
+	"encoding/json"
+	"fmt"
+	"net/http"
+
+	"powerpod/gotool/pb"
+)
+
+type tapConfigFields struct {
+	TapSensThres       uint32 `json:"tap_sens_thres"`
+	MaxGestDur         uint32 `json:"max_gest_dur"`
+	TapShockDur        uint32 `json:"tap_shock_dur"`
+	QuiteTimeAfterGest uint32 `json:"quite_time_after_gest"`
+	WaitForTimeout     uint32 `json:"wait_for_timeout"`
+	AxisSel            uint32 `json:"axis_sel"`
+	EnableSingle       bool   `json:"enable_single"`
+	EnableDouble       bool   `json:"enable_double"`
+	EnableTriple       bool   `json:"enable_triple"`
+}
+
+type tapConfigAPIResponse struct {
+	tapConfigFields
+	ClientID      uint32 `json:"client_id"`
+	Success       bool   `json:"success"`
+	SlavesUpdated uint32 `json:"slaves_updated"`
+	Error         string `json:"error,omitempty"`
+}
+
+type tapConfigAPIRequest struct {
+	Write      bool   `json:"write"`
+	ClientID   uint32 `json:"client_id"`
+	AllClients bool   `json:"all_clients"`
+	// SlavesOnly: with all_clients, push to ESP-NOW slaves only (master BMA456 unchanged).
+	SlavesOnly bool `json:"slaves_only"`
+	tapConfigFields
+}
+
+func tapConfigFieldsFromPB(r *pb.TapConfigResponse) tapConfigFields {
+	return tapConfigFields{
+		TapSensThres:       r.GetTapSensThres(),
+		MaxGestDur:         r.GetMaxGestDur(),
+		TapShockDur:        r.GetTapShockDur(),
+		QuiteTimeAfterGest: r.GetQuiteTimeAfterGest(),
+		WaitForTimeout:     r.GetWaitForTimeout(),
+		AxisSel:            r.GetAxisSel(),
+		EnableSingle:       r.GetEnableSingle(),
+		EnableDouble:       r.GetEnableDouble(),
+		EnableTriple:       r.GetEnableTriple(),
+	}
+}
+
+func (f tapConfigFields) toPBRequest(write bool, clientID uint32, all bool) *pb.TapConfigRequest {
+	return &pb.TapConfigRequest{
+		Write:              write,
+		ClientId:           clientID,
+		AllClients:         all,
+		TapSensThres:       f.TapSensThres,
+		MaxGestDur:         f.MaxGestDur,
+		TapShockDur:        f.TapShockDur,
+		QuiteTimeAfterGest: f.QuiteTimeAfterGest,
+		WaitForTimeout:     f.WaitForTimeout,
+		AxisSel:            f.AxisSel,
+		EnableSingle:       f.EnableSingle,
+		EnableDouble:       f.EnableDouble,
+		EnableTriple:       f.EnableTriple,
+	}
+}
+
+func mountTapConfigAPI(mux *http.ServeMux, link *managedSerial) {
+	mux.HandleFunc("/api/tap-config", func(w http.ResponseWriter, r *http.Request) {
+		switch r.Method {
+		case http.MethodGet:
+			serveTapConfigGet(w, r, link)
+		case http.MethodPost:
+			serveTapConfigPost(w, r, link)
+		default:
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+		}
+	})
+}
+
+func serveTapConfigGet(w http.ResponseWriter, r *http.Request, link *managedSerial) {
+	clientID, err := parseUintQuery(r, "client_id", 0)
+	if err != nil {
+		writeJSON(w, http.StatusBadRequest, tapConfigAPIResponse{Error: err.Error()})
+		return
+	}
+	resp, err := link.TapConfig(&pb.TapConfigRequest{
+		Write:    false,
+		ClientId: clientID,
+	})
+	if err != nil {
+		writeJSON(w, http.StatusServiceUnavailable, tapConfigAPIResponse{
+			ClientID: clientID,
+			Error:    err.Error(),
+		})
+		return
+	}
+	out := tapConfigAPIResponse{
+		tapConfigFields: tapConfigFieldsFromPB(resp),
+		ClientID:        resp.GetClientId(),
+		Success:         resp.GetSuccess(),
+	}
+	writeJSON(w, http.StatusOK, out)
+}
+
+func serveTapConfigPost(w http.ResponseWriter, r *http.Request, link *managedSerial) {
+	var body tapConfigAPIRequest
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+		writeJSON(w, http.StatusBadRequest, tapConfigAPIResponse{Error: "invalid JSON"})
+		return
+	}
+	if body.AllClients && body.SlavesOnly {
+		updated, err := applyTapConfigToSlaves(link, body.tapConfigFields)
+		if err != nil {
+			writeJSON(w, http.StatusServiceUnavailable, tapConfigAPIResponse{
+				tapConfigFields: body.tapConfigFields,
+				Error:           err.Error(),
+			})
+			return
+		}
+		writeJSON(w, http.StatusOK, tapConfigAPIResponse{
+			tapConfigFields: body.tapConfigFields,
+			Success:         updated > 0,
+			SlavesUpdated:   updated,
+		})
+		return
+	}
+
+	resp, err := link.TapConfig(body.tapConfigFields.toPBRequest(true, body.ClientID, body.AllClients))
+	if err != nil {
+		writeJSON(w, http.StatusServiceUnavailable, tapConfigAPIResponse{
+			ClientID:        body.ClientID,
+			tapConfigFields: body.tapConfigFields,
+			Error:           err.Error(),
+		})
+		return
+	}
+	writeJSON(w, http.StatusOK, tapConfigAPIResponse{
+		tapConfigFields: tapConfigFieldsFromPB(resp),
+		ClientID:        resp.GetClientId(),
+		Success:         resp.GetSuccess(),
+		SlavesUpdated:   resp.GetSlavesUpdated(),
+	})
+}
+
+func applyTapConfigToSlaves(link *managedSerial, fields tapConfigFields) (uint32, error) {
+	clients, err := link.listClients()
+	if err != nil {
+		return 0, err
+	}
+	var updated uint32
+	for _, c := range clients {
+		resp, err := link.TapConfig(fields.toPBRequest(true, c.GetId(), false))
+		if err != nil {
+			continue
+		}
+		if resp.GetSuccess() {
+			updated++
+		}
+	}
+	if len(clients) == 0 {
+		return 0, fmt.Errorf("no slaves registered")
+	}
+	if updated == 0 {
+		return 0, fmt.Errorf("tap config not applied to any slave")
+	}
+	return updated, nil
+}

goTool/autotest/config.go

@@ -84,13 +84,7 @@ func NewBench(cfg Config) (*Bench, error) {
 			return nil, fmt.Errorf("config %q slave %q: %w", cfg.ID, s.ID, err)
 		}
 		s.MAC = mac
-		if s.ClientID == nil {
-			parts := strings.Split(mac, ":")
-			var last byte
-			fmt.Sscanf(parts[5], "%02x", &last)
-			id := uint(last)
-			s.ClientID = &id
-		}
+		/* client_id is master-assigned (sequential); omit until known from `gotool clients`. */
 		b.slaveByID[s.ID] = s
 	}
 	return b, nil
@@ -112,6 +106,9 @@ func (b *Bench) ResolveClientID(slaveID string) (uint32, error) {
 	if err != nil {
 		return 0, err
 	}
+	if s.ClientID == nil {
+		return 0, fmt.Errorf("slave %q: client_id required (master-assigned; set in config after join)", slaveID)
+	}
 	return uint32(*s.ClientID), nil
 }
 

goTool/autotest/config_test.go

@@ -2,7 +2,7 @@ package autotest
 
 import "testing"
 
-func TestNewBenchClientIDFromMAC(t *testing.T) {
+func TestNewBenchNoDefaultClientIDFromMAC(t *testing.T) {
 	cfg := Config{
 		ID:        "t",
 		Network:   1,
@@ -20,8 +20,39 @@ func TestNewBenchClientIDFromMAC(t *testing.T) {
 		t.Fatal(err)
 	}
 	s, _ := b.Slave("pod")
-	if *s.ClientID != 16 {
-		t.Fatalf("client_id=%d want 16", *s.ClientID)
+	if s.ClientID != nil {
+		t.Fatalf("client_id should be unset, got %d", *s.ClientID)
+	}
+	if _, err := b.ResolveClientID("pod"); err == nil {
+		t.Fatal("ResolveClientID should fail without client_id")
+	}
+}
+
+func TestNewBenchExplicitClientID(t *testing.T) {
+	id := uint(3)
+	cfg := Config{
+		ID:        "t",
+		Network:   1,
+		MasterMAC: "aa:bb:cc:dd:ee:ff",
+		UART: UARTConfig{
+			Master: "/dev/ttyUSB0",
+		},
+		Slaves: []SlaveNode{{
+			ID:       "pod",
+			MAC:      "50:78:7d:18:01:10",
+			ClientID: &id,
+		}},
+	}
+	b, err := NewBench(cfg)
+	if err != nil {
+		t.Fatal(err)
+	}
+	got, err := b.ResolveClientID("pod")
+	if err != nil {
+		t.Fatal(err)
+	}
+	if got != 3 {
+		t.Fatalf("client_id=%d want 3", got)
 	}
 }
 

goTool/autotest/runner.go

@@ -15,6 +15,10 @@ type MasterClient interface {
 	ListClients() ([]*pb.ClientInfo, error)
 	AccelDeadzone(req *pb.AccelDeadzoneRequest) (*pb.AccelDeadzoneResponse, error)
 	EspnowUnicastTest(clientID, seq uint32) (*pb.EspNowUnicastTestResponse, error)
+	LedRing(req *pb.LedRingProgressRequest) (*pb.LedRingProgressResponse, error)
+	FindMe(clientID uint32) (*pb.EspNowFindMeResponse, error)
+	Restart(clientID uint32) (*pb.RestartResponse, error)
+	OtaSlaveProgress(clientID uint32) (*pb.OtaSlaveProgressResponse, error)
 }
 
 type StepResult struct {
@@ -92,6 +96,14 @@ func runStep(bench *Bench, step Step, client MasterClient) error {
 		return checkDeadzone(bench, step, client)
 	case "unicast_test", "unicast":
 		return checkUnicastTest(bench, step, client)
+	case "led_ring", "ledring":
+		return checkLedRing(step, client)
+	case "find_me", "findme":
+		return checkFindMe(bench, step, client)
+	case "restart":
+		return checkRestartCmd(bench, step, client)
+	case "ota_progress", "ota_slave_progress":
+		return checkOtaProgress(step, client)
 	case "reset", "reboot":
 		return checkReset(bench, step)
 	default:
@@ -183,7 +195,7 @@ func checkClients(bench *Bench, step Step, client MasterClient) error {
 		if found == nil {
 			return fmt.Errorf("slave %q mac %s not in client list", name, want.MAC)
 		}
-		if uint32(*want.ClientID) != found.GetId() {
+		if want.ClientID != nil && uint32(*want.ClientID) != found.GetId() {
 			return fmt.Errorf("slave %q id=%d want client_id=%d", name, found.GetId(), *want.ClientID)
 		}
 		if e.Available != nil && found.GetAvailable() != *e.Available {
@@ -310,3 +322,207 @@ func checkUnicastTest(bench *Bench, step Step, client MasterClient) error {
 	}
 	return nil
 }
+
+type ledRingInput struct {
+	Mode       string `json:"mode"`
+	Progress   uint   `json:"progress"`
+	Digit      uint   `json:"digit"`
+	R          uint   `json:"r"`
+	G          uint   `json:"g"`
+	B          uint   `json:"b"`
+	Intensity  uint   `json:"intensity"`
+	BlinkMs    uint   `json:"blink_ms"`
+	BlinkCount uint   `json:"blink_count"`
+}
+
+func ledRingModeValue(mode string) (uint32, error) {
+	switch strings.ToLower(strings.ReplaceAll(mode, "-", "_")) {
+	case "clear", "":
+		return 0, nil
+	case "progress":
+		return 1, nil
+	case "digit":
+		return 2, nil
+	case "blink":
+		return 3, nil
+	case "find_me", "findme":
+		return 4, nil
+	case "battery_low", "batterylow":
+		return 6, nil
+	case "color", "solid", "fill":
+		return 5, nil
+	default:
+		return 0, fmt.Errorf("unknown led_ring mode %q", mode)
+	}
+}
+
+func checkLedRing(step Step, client MasterClient) error {
+	var in ledRingInput
+	if len(step.Input) > 0 {
+		if err := json.Unmarshal(step.Input, &in); err != nil {
+			return fmt.Errorf("input: %w", err)
+		}
+	}
+	mode, err := ledRingModeValue(in.Mode)
+	if err != nil {
+		return err
+	}
+	if in.Mode == "" && step.Expect.Mode != nil {
+		mode = *step.Expect.Mode
+	}
+
+	req := &pb.LedRingProgressRequest{
+		Mode:       mode,
+		Progress:   uint32(in.Progress),
+		Digit:      uint32(in.Digit),
+		R:          uint32(in.R),
+		G:          uint32(in.G),
+		B:          uint32(in.B),
+		Intensity:  uint32(in.Intensity),
+		BlinkMs:    uint32(in.BlinkMs),
+		BlinkCount: uint32(in.BlinkCount),
+	}
+	if mode == 1 && req.GetG() == 0 && req.GetR() == 0 && req.GetB() == 0 {
+		req.G = 255
+	}
+
+	resp, err := client.LedRing(req)
+	if err != nil {
+		return err
+	}
+
+	e := step.Expect
+	if e.Success != nil && resp.GetSuccess() != *e.Success {
+		return fmt.Errorf("success=%v want %v", resp.GetSuccess(), *e.Success)
+	}
+	if e.Mode != nil && resp.GetMode() != *e.Mode {
+		return fmt.Errorf("mode=%d want %d", resp.GetMode(), *e.Mode)
+	}
+	if e.Progress != nil && resp.GetProgress() != *e.Progress {
+		return fmt.Errorf("progress=%d want %d", resp.GetProgress(), *e.Progress)
+	}
+	if e.Digit != nil && resp.GetDigit() != *e.Digit {
+		return fmt.Errorf("digit=%d want %d", resp.GetDigit(), *e.Digit)
+	}
+	return nil
+}
+
+type findMeInput struct {
+	ClientID *uint  `json:"client_id"`
+	Client   uint   `json:"client"`
+	Slave    string `json:"slave"`
+}
+
+func checkFindMe(bench *Bench, step Step, client MasterClient) error {
+	var in findMeInput
+	if len(step.Input) > 0 {
+		if err := json.Unmarshal(step.Input, &in); err != nil {
+			return fmt.Errorf("input: %w", err)
+		}
+	}
+
+	clientID, err := resolveClientID(bench, in.Slave, in.ClientID, in.Client)
+	if err != nil {
+		return err
+	}
+
+	resp, err := client.FindMe(clientID)
+	if err != nil {
+		return err
+	}
+
+	e := step.Expect
+	if e.Success != nil && resp.GetSuccess() != *e.Success {
+		return fmt.Errorf("success=%v want %v", resp.GetSuccess(), *e.Success)
+	}
+	if e.Slave != "" || in.Slave != "" {
+		wantSlave := e.Slave
+		if wantSlave == "" {
+			wantSlave = in.Slave
+		}
+		wantID, err := bench.ResolveClientID(wantSlave)
+		if err != nil {
+			return err
+		}
+		if resp.GetClientId() != wantID {
+			return fmt.Errorf("client_id=%d want %d", resp.GetClientId(), wantID)
+		}
+	}
+	return nil
+}
+
+type restartCmdInput struct {
+	ClientID *uint  `json:"client_id"`
+	Client   uint   `json:"client"`
+	Slave    string `json:"slave"`
+}
+
+func checkRestartCmd(bench *Bench, step Step, client MasterClient) error {
+	var in restartCmdInput
+	if len(step.Input) > 0 {
+		if err := json.Unmarshal(step.Input, &in); err != nil {
+			return fmt.Errorf("input: %w", err)
+		}
+	}
+
+	clientID, err := resolveClientID(bench, in.Slave, in.ClientID, in.Client)
+	if err != nil {
+		return err
+	}
+
+	resp, err := client.Restart(clientID)
+	if err != nil {
+		return err
+	}
+
+	e := step.Expect
+	if e.Success != nil && resp.GetSuccess() != *e.Success {
+		return fmt.Errorf("success=%v want %v", resp.GetSuccess(), *e.Success)
+	}
+	if resp.GetClientId() != clientID {
+		return fmt.Errorf("client_id=%d want %d", resp.GetClientId(), clientID)
+	}
+	return nil
+}
+
+type otaProgressInput struct {
+	ClientID *uint  `json:"client_id"`
+	Client   uint   `json:"client"`
+	Slave    string `json:"slave"`
+}
+
+func checkOtaProgress(step Step, client MasterClient) error {
+	var in otaProgressInput
+	if len(step.Input) > 0 {
+		if err := json.Unmarshal(step.Input, &in); err != nil {
+			return fmt.Errorf("input: %w", err)
+		}
+	}
+
+	clientID := uint32(in.Client)
+	if in.ClientID != nil {
+		clientID = uint32(*in.ClientID)
+	}
+
+	resp, err := client.OtaSlaveProgress(clientID)
+	if err != nil {
+		return err
+	}
+
+	e := step.Expect
+	if e.Active != nil && resp.GetActive() != *e.Active {
+		return fmt.Errorf("active=%v want %v", resp.GetActive(), *e.Active)
+	}
+	return nil
+}
+
+func resolveClientID(bench *Bench, slave string, clientID *uint, client uint) (uint32, error) {
+	switch {
+	case slave != "":
+		return bench.ResolveClientID(slave)
+	case clientID != nil:
+		return uint32(*clientID), nil
+	default:
+		return uint32(client), nil
+	}
+}

goTool/autotest/runner_test.go

@@ -0,0 +1,26 @@
+package autotest
+
+import "testing"
+
+func TestLedRingModeValue(t *testing.T) {
+	tests := []struct {
+		mode string
+		want uint32
+	}{
+		{"clear", 0},
+		{"progress", 1},
+		{"digit", 2},
+		{"blink", 3},
+		{"find-me", 4},
+		{"battery-low", 6},
+	}
+	for _, tc := range tests {
+		got, err := ledRingModeValue(tc.mode)
+		if err != nil {
+			t.Fatalf("mode %q: %v", tc.mode, err)
+		}
+		if got != tc.want {
+			t.Fatalf("mode %q = %d want %d", tc.mode, got, tc.want)
+		}
+	}
+}

goTool/autotest/scenario.go

@@ -45,6 +45,14 @@ type Expect struct {
 
 	// unicast_test
 	Seq *uint32 `json:"seq,omitempty"`
+
+	// led_ring
+	Mode     *uint32 `json:"mode,omitempty"`
+	Progress *uint32 `json:"progress,omitempty"`
+	Digit    *uint32 `json:"digit,omitempty"`
+
+	// ota_slave_progress
+	Active *bool `json:"active,omitempty"`
 }
 
 func LoadScenario(path string) (*Scenario, error) {

goTool/battery_api.go

@@ -0,0 +1,120 @@
+package main
+
+import (
+	"powerpod/gotool/pb"
+)
+
+const (
+	lipoMinMv = 3000
+	lipoMaxMv = 4200
+)
+
+type lipoReadingJSON struct {
+	Valid     bool   `json:"valid"`
+	VoltageMv uint32 `json:"voltage_mv"`
+	Percent   int    `json:"percent,omitempty"`
+}
+
+type batterySampleJSON struct {
+	ClientID uint32          `json:"client_id"`
+	Lipo1    lipoReadingJSON `json:"lipo1"`
+	Lipo2    lipoReadingJSON `json:"lipo2"`
+	AgeMs    uint32          `json:"age_ms,omitempty"`
+}
+
+type batteryAPIRequest struct {
+	ClientID   uint32 `json:"client_id"`
+	AllClients bool   `json:"all_clients"`
+}
+
+type batteryAPIResponse struct {
+	Type     string              `json:"type,omitempty"` // battery_status (WebSocket)
+	Success  bool                `json:"success"`
+	Samples  []batterySampleJSON `json:"samples,omitempty"`
+	Error    string              `json:"error,omitempty"`
+}
+
+func lipoPercent(mv uint32) int {
+	if mv <= lipoMinMv {
+		return 0
+	}
+	if mv >= lipoMaxMv {
+		return 100
+	}
+	return int((mv - lipoMinMv) * 100 / (lipoMaxMv - lipoMinMv))
+}
+
+func lipoFromPBMsg(l *pb.LipoReading) lipoReadingJSON {
+	if l == nil {
+		return lipoReadingJSON{}
+	}
+	return lipoFromPB(l.GetValid(), l.GetVoltageMv())
+}
+
+func lipoFromPB(valid bool, mv uint32) lipoReadingJSON {
+	out := lipoReadingJSON{Valid: valid, VoltageMv: mv}
+	if valid {
+		out.Percent = lipoPercent(mv)
+	}
+	return out
+}
+
+func batterySamplesFromPB(samples []*pb.BatterySample) []batterySampleJSON {
+	out := make([]batterySampleJSON, 0, len(samples))
+	for _, s := range samples {
+		out = append(out, batterySampleJSON{
+			ClientID: s.GetClientId(),
+			Lipo1:    lipoFromPBMsg(s.GetLipo1()),
+			Lipo2:    lipoFromPBMsg(s.GetLipo2()),
+			AgeMs:    s.GetAgeMs(),
+		})
+	}
+	return out
+}
+
+func applyBatteryStatus(link *managedSerial, in batteryAPIRequest) batteryAPIResponse {
+	resp, err := link.BatteryStatus(&pb.BatteryStatusRequest{
+		ClientId:   in.ClientID,
+		AllClients: in.AllClients,
+	})
+	if err != nil {
+		return batteryAPIResponse{Error: err.Error()}
+	}
+	samples := batterySamplesFromPB(resp.GetSamples())
+	out := batteryAPIResponse{
+		Success: resp.GetSuccess() || len(samples) > 0,
+		Samples: samples,
+	}
+	if len(samples) == 0 && out.Error == "" {
+		out.Error = "battery status unavailable"
+	}
+	return out
+}
+
+func findBatterySample(samples []batterySampleJSON, clientID uint32) (batterySampleJSON, bool) {
+	for _, s := range samples {
+		if s.ClientID == clientID {
+			return s, true
+		}
+	}
+	return batterySampleJSON{}, false
+}
+
+// applyBatterySamplesToState merges UART/REST battery samples into dashboard views.
+func applyBatterySamplesToState(st *DashboardState, samples []batterySampleJSON) {
+	if st == nil || len(samples) == 0 {
+		return
+	}
+	if m, ok := findBatterySample(samples, 0); ok {
+		st.Master.Lipo1 = m.Lipo1
+		st.Master.Lipo2 = m.Lipo2
+		st.Master.BatteryAgeMs = m.AgeMs
+	}
+	for i := range st.Clients {
+		if s, ok := findBatterySample(samples, st.Clients[i].ID); ok {
+			st.Clients[i].Lipo1 = s.Lipo1
+			st.Clients[i].Lipo2 = s.Lipo2
+			st.Clients[i].BatteryAgeMs = s.AgeMs
+		}
+	}
+}

goTool/ble_link.go

@@ -0,0 +1,367 @@
+package main
+
+import (
+	"fmt"
+	"log"
+	"sync"
+	"time"
+
+	"tinygo.org/x/bluetooth"
+
+	pb "powerpod/gotool/pb"
+	uartframe "powerpod/gotool/uart"
+)
+
+const (
+	bleServiceUUID = "6e400001-b5a3-f393-e0a9-e50e24dcca9e"
+	bleCharUUID    = "6e400002-b5a3-f393-e0a9-e50e24dcca9e"
+	bleDefaultName = "Powerpod"
+)
+
+type bleLink struct {
+	device   bluetooth.Device
+	char     bluetooth.DeviceCharacteristic
+	mu       sync.Mutex
+	parserMu sync.Mutex
+	parser   *uartframe.Parser
+	respCh   chan []byte
+	streamCh chan []byte
+	quiet    bool
+	attMTU   int // negotiated ATT MTU (0 if unknown)
+}
+
+func openBLE(name string, settle time.Duration) (*bleLink, error) {
+	if name == "" {
+		name = bleDefaultName
+	}
+	adapter := bluetooth.DefaultAdapter
+	if err := adapter.Enable(); err != nil {
+		return nil, fmt.Errorf("enable bluetooth adapter: %w (check BlueZ / permissions)", err)
+	}
+
+	log.Printf("BLE scanning for %q…", name)
+	var foundAddr bluetooth.Address
+	var found bool
+	go func() {
+		time.Sleep(15 * time.Second)
+		_ = adapter.StopScan()
+	}()
+	err := adapter.Scan(func(a *bluetooth.Adapter, result bluetooth.ScanResult) {
+		if result.LocalName() != name {
+			return
+		}
+		foundAddr = result.Address
+		found = true
+		_ = a.StopScan()
+	})
+	if err != nil {
+		return nil, fmt.Errorf("scan: %w", err)
+	}
+	if !found {
+		return nil, fmt.Errorf("device %q not found (check DIP8=BLE and advertising)", name)
+	}
+	return connectBLEDevice(foundAddr, settle)
+}
+
+func openBLEAddress(addrStr string, settle time.Duration) (*bleLink, error) {
+	adapter := bluetooth.DefaultAdapter
+	if err := adapter.Enable(); err != nil {
+		return nil, fmt.Errorf("enable bluetooth adapter: %w (check BlueZ / permissions)", err)
+	}
+	if mac, err := bluetooth.ParseMAC(addrStr); err == nil {
+		var addr bluetooth.Address
+		addr.Set(mac.String())
+		return connectBLEDevice(addr, settle)
+	}
+	// Fallback: scan until address string matches
+	log.Printf("BLE resolving address %s via scan…", addrStr)
+	var foundAddr bluetooth.Address
+	var found bool
+	go func() {
+		time.Sleep(15 * time.Second)
+		_ = adapter.StopScan()
+	}()
+	err := adapter.Scan(func(a *bluetooth.Adapter, result bluetooth.ScanResult) {
+		if result.Address.String() != addrStr {
+			return
+		}
+		foundAddr = result.Address
+		found = true
+		_ = a.StopScan()
+	})
+	if err != nil {
+		return nil, fmt.Errorf("scan for address: %w", err)
+	}
+	if !found {
+		return nil, fmt.Errorf("BLE address %s not found", addrStr)
+	}
+	return connectBLEDevice(foundAddr, settle)
+}
+
+func connectBLEDevice(addr bluetooth.Address, settle time.Duration) (*bleLink, error) {
+	svcUUID, err := bluetooth.ParseUUID(bleServiceUUID)
+	if err != nil {
+		return nil, err
+	}
+	chrUUID, err := bluetooth.ParseUUID(bleCharUUID)
+	if err != nil {
+		return nil, err
+	}
+
+	adapter := bluetooth.DefaultAdapter
+	log.Printf("BLE connecting to %s…", addr.String())
+	device, err := adapter.Connect(addr, bluetooth.ConnectionParams{})
+	if err != nil {
+		return nil, fmt.Errorf("connect: %w", err)
+	}
+
+	services, err := device.DiscoverServices([]bluetooth.UUID{svcUUID})
+	if err != nil || len(services) == 0 {
+		_ = device.Disconnect()
+		return nil, fmt.Errorf("discover service: %v", err)
+	}
+	chars, err := services[0].DiscoverCharacteristics([]bluetooth.UUID{chrUUID})
+	if err != nil || len(chars) == 0 {
+		_ = device.Disconnect()
+		return nil, fmt.Errorf("discover characteristic: %v", err)
+	}
+	char := chars[0]
+
+	attMTU := 0
+	if mtu, err := char.GetMTU(); err == nil {
+		attMTU = int(mtu)
+		log.Printf("BLE ATT MTU=%d", attMTU)
+		if attMTU < otaMinATTMTU {
+			log.Printf("warning: MTU %d < %d — OTA (200 B chunks) and large stream ticks may fail",
+				attMTU, otaMinATTMTU)
+		}
+	}
+
+	link := &bleLink{
+		device:   device,
+		char:     char,
+		parser:   uartframe.NewParser(),
+		respCh:   make(chan []byte, 8),
+		streamCh: make(chan []byte, 64),
+		attMTU:   attMTU,
+	}
+
+	if err := char.EnableNotifications(func(buf []byte) {
+		link.onNotify(buf)
+	}); err != nil {
+		_ = device.Disconnect()
+		return nil, fmt.Errorf("enable notifications: %w (CCCD required before commands)", err)
+	}
+
+	if settle <= 0 {
+		settle = time.Second
+	}
+	log.Printf("BLE connected; settling %v…", settle)
+	time.Sleep(settle)
+
+	return link, nil
+}
+
+func (b *bleLink) onNotify(buf []byte) {
+	b.parserMu.Lock()
+	defer b.parserMu.Unlock()
+	for _, by := range buf {
+		payload, ok, err := b.parser.Feed(by)
+		if err != nil || !ok {
+			continue
+		}
+		if len(payload) == 0 {
+			continue
+		}
+		if payload[0] == byte(pb.MessageType_BLE_STREAM_TICK) {
+			select {
+			case b.streamCh <- payload:
+			default:
+			}
+			continue
+		}
+		select {
+		case b.respCh <- payload:
+		default:
+			// Prefer dropping the oldest queued frame so a late/stale reply
+			// does not block the matching response for the in-flight command.
+			select {
+			case <-b.respCh:
+			default:
+			}
+			select {
+			case b.respCh <- payload:
+			default:
+				log.Printf("BLE: response channel full, dropping frame type=0x%02x", payload[0])
+			}
+		}
+	}
+}
+
+func (b *bleLink) resetParser() {
+	b.parserMu.Lock()
+	b.parser = uartframe.NewParser()
+	b.parserMu.Unlock()
+}
+
+func (b *bleLink) Close() error {
+	return b.device.Disconnect()
+}
+
+func (b *bleLink) exchange(cmdID byte, cmdName string) ([]byte, error) {
+	return b.exchangePayload([]byte{cmdID}, cmdName)
+}
+
+func (b *bleLink) exchangePayload(payload []byte, cmdName string) ([]byte, error) {
+	return b.exchangePayloadTimeout(payload, cmdName, readTimeout)
+}
+
+func (b *bleLink) exchangePayloadTimeout(payload []byte, cmdName string, timeout time.Duration) ([]byte, error) {
+	b.mu.Lock()
+	defer b.mu.Unlock()
+
+	if len(payload) == 0 {
+		return nil, fmt.Errorf("empty payload")
+	}
+	expect := payload[0]
+	if timeout <= 0 {
+		timeout = readTimeout
+	}
+
+	frame, err := uartframe.EncodeFrame(payload)
+	if err != nil {
+		return nil, fmt.Errorf("encode frame: %w", err)
+	}
+	if !b.quiet {
+		log.Printf("BLE sending %s (%d bytes)", cmdName, len(frame))
+	}
+
+	for {
+		select {
+		case <-b.respCh:
+		default:
+			goto sent
+		}
+	}
+sent:
+	if _, err := b.char.WriteWithoutResponse(frame); err != nil {
+		return nil, fmt.Errorf("BLE write: %w (check DIP8=BLE)", err)
+	}
+
+	deadline := time.Now().Add(timeout)
+	for {
+		remain := time.Until(deadline)
+		if remain <= 0 {
+			// Drop a half-parsed frame (e.g. aborted multi-notify) so the next
+			// exchange does not treat a new 0xAA as payload data.
+			b.resetParser()
+			return nil, fmt.Errorf("BLE read timeout for %s (check DIP8=BLE / -ble)", cmdName)
+		}
+		timer := time.NewTimer(remain)
+		select {
+		case resp := <-b.respCh:
+			timer.Stop()
+			if len(resp) == 0 {
+				continue
+			}
+			if resp[0] != expect {
+				// Stale reply (e.g. late BATTERY_STATUS after a short timeout).
+				if !b.quiet {
+					log.Printf("BLE: discard type=0x%02x while waiting for 0x%02x (%s)", resp[0], expect, cmdName)
+				}
+				continue
+			}
+			if !b.quiet {
+				log.Printf("BLE response (%d bytes)", len(resp))
+			}
+			return resp, nil
+		case <-timer.C:
+			b.resetParser()
+			return nil, fmt.Errorf("BLE read timeout for %s (check DIP8=BLE / -ble)", cmdName)
+		}
+	}
+}
+
+func (b *bleLink) NextStreamTick(timeout time.Duration) ([]byte, error) {
+	if timeout <= 0 {
+		timeout = 5 * time.Second
+	}
+	timer := time.NewTimer(timeout)
+	defer timer.Stop()
+	select {
+	case p := <-b.streamCh:
+		return p, nil
+	case <-timer.C:
+		return nil, fmt.Errorf("BLE stream tick timeout")
+	}
+}
+
+// ensureOTAMTU rejects OTA when the negotiated ATT MTU cannot carry 200 B chunks.
+func (b *bleLink) ensureOTAMTU() error {
+	mtu := b.attMTU
+	if mtu <= 0 {
+		if v, err := b.char.GetMTU(); err == nil {
+			mtu = int(v)
+			b.attMTU = mtu
+		}
+	}
+	if mtu < otaMinATTMTU {
+		return fmt.Errorf("BLE ATT MTU %d < %d required for OTA (negotiate larger MTU)", mtu, otaMinATTMTU)
+	}
+	maxWrite := mtu - 3
+	if maxWrite < 216 {
+		return fmt.Errorf("BLE max write %d < 216 needed for 200 B OTA frames", maxWrite)
+	}
+	return nil
+}
+
+func (b *bleLink) writeMsg(msg *pb.UartMessage) error {
+	b.mu.Lock()
+	defer b.mu.Unlock()
+	frame, err := encodeUartMessage(msg)
+	if err != nil {
+		return err
+	}
+	if b.attMTU > 0 && len(frame) > b.attMTU-3 {
+		return fmt.Errorf("OTA frame %d exceeds BLE max write %d (MTU=%d)",
+			len(frame), b.attMTU-3, b.attMTU)
+	}
+	if _, err := b.char.WriteWithoutResponse(frame); err != nil {
+		return fmt.Errorf("BLE write: %w", err)
+	}
+	return nil
+}
+
+func (b *bleLink) readFrame(timeout time.Duration) ([]byte, error) {
+	if timeout <= 0 {
+		timeout = readTimeout
+	}
+	timer := time.NewTimer(timeout)
+	defer timer.Stop()
+	select {
+	case p := <-b.respCh:
+		return p, nil
+	case <-timer.C:
+		return nil, fmt.Errorf("BLE read timeout")
+	}
+}
+
+func (b *bleLink) flushInput() {
+	for {
+		select {
+		case <-b.respCh:
+		default:
+			goto streams
+		}
+	}
+streams:
+	for {
+		select {
+		case <-b.streamCh:
+		default:
+			return
+		}
+	}
+}
+
+func (b *bleLink) chunkPace() time.Duration { return otaHostChunkPaceBLE }

goTool/ble_measure.go

@@ -0,0 +1,224 @@
+package main
+
+import (
+	"fmt"
+	"math"
+	"sort"
+	"time"
+
+	pb "powerpod/gotool/pb"
+
+	"google.golang.org/protobuf/proto"
+)
+
+type latencyStats struct {
+	N      int     `json:"n"`
+	MinMs  float64 `json:"min_ms"`
+	MedMs  float64 `json:"median_ms"`
+	MeanMs float64 `json:"mean_ms"`
+	MaxMs  float64 `json:"max_ms"`
+}
+
+type bleRttResult struct {
+	Success bool         `json:"success"`
+	Count   int          `json:"count"`
+	Warmup  int          `json:"warmup"`
+	Stats   latencyStats `json:"stats"`
+	Error   string       `json:"error,omitempty"`
+}
+
+type bleStreamResult struct {
+	Success     bool         `json:"success"`
+	Received    int          `json:"received"`
+	Requested   int          `json:"requested"`
+	PeriodMs    uint32       `json:"period_ms"`
+	TolMs       float64      `json:"tol_ms"`
+	OutsideTol  int          `json:"outside_tol"`
+	WindowOK    bool         `json:"window_ok"`
+	DTEsp       latencyStats `json:"dt_esp_ms"`
+	DRPc        latencyStats `json:"dr_pc_ms"`
+	ExtraVsFirst latencyStats `json:"extra_vs_first_ms"`
+	Error       string       `json:"error,omitempty"`
+}
+
+func measureBleRtt(h hostConn, count, warmup int, settle time.Duration) bleRttResult {
+	out := bleRttResult{Count: count, Warmup: warmup}
+	if count < 1 {
+		out.Error = "count must be >= 1"
+		return out
+	}
+	if warmup < 0 {
+		out.Error = "warmup must be >= 0"
+		return out
+	}
+	if settle > 0 {
+		time.Sleep(settle)
+	}
+
+	samples := make([]float64, 0, count)
+	total := warmup + count
+	for i := 0; i < total; i++ {
+		t0 := time.Now()
+		if _, err := hostGetVersion(h); err != nil {
+			out.Error = fmt.Sprintf("VERSION round-trip %d: %v", i, err)
+			return out
+		}
+		ms := float64(time.Since(t0).Microseconds()) / 1000.0
+		if i >= warmup {
+			samples = append(samples, ms)
+		}
+	}
+	out.Stats = makeLatencyStats(samples)
+	out.Success = true
+	return out
+}
+
+func measureBleStream(h hostConn, clientID, periodMs uint32, count int, tolMs, timeoutSec float64) bleStreamResult {
+	out := bleStreamResult{
+		Requested: count,
+		PeriodMs:  periodMs,
+		TolMs:     tolMs,
+	}
+	if periodMs < 10 || periodMs > 16 {
+		out.Error = "period_ms must be 10..16"
+		return out
+	}
+	if count < 2 {
+		out.Error = "count must be >= 2"
+		return out
+	}
+	sc, ok := h.(hostStreamConn)
+	if !ok {
+		out.Error = "BLE stream ticks require BLE host"
+		return out
+	}
+
+	req := &pb.AccelStreamRequest{
+		Write:    true,
+		Enable:   true,
+		PeriodMs: periodMs,
+	}
+	if clientID == 0 {
+		req.AllClients = true
+	} else {
+		req.ClientId = clientID
+	}
+	resp, err := hostAccelStream(h, req)
+	if err != nil {
+		out.Error = err.Error()
+		return out
+	}
+	if !resp.GetSuccess() {
+		out.Error = "accel stream enable failed"
+		return out
+	}
+
+	type sample struct {
+		espUs uint64
+		pcT  float64
+	}
+	samples := make([]sample, 0, count)
+	deadline := time.Now().Add(time.Duration(timeoutSec * float64(time.Second)))
+	if timeoutSec <= 0 {
+		deadline = time.Now().Add(15 * time.Second)
+	}
+
+	for len(samples) < count {
+		remain := time.Until(deadline)
+		if remain <= 0 {
+			break
+		}
+		payload, err := sc.NextStreamTick(remain)
+		if err != nil {
+			break
+		}
+		pcT := time.Now().UnixMicro()
+		var msg pb.UartMessage
+		if err := proto.Unmarshal(payload[1:], &msg); err != nil {
+			continue
+		}
+		tick := msg.GetBleStreamTick()
+		if tick == nil {
+			continue
+		}
+		samples = append(samples, sample{espUs: tick.GetEspTimestampUs(), pcT: float64(pcT)})
+	}
+
+	off := &pb.AccelStreamRequest{Write: true, Enable: false, AllClients: req.AllClients, ClientId: req.ClientId}
+	_, _ = hostAccelStream(h, off)
+
+	out.Received = len(samples)
+	if len(samples) < 2 {
+		out.Error = fmt.Sprintf("need >=2 ticks, got %d (stream running / DIP8=BLE?)", len(samples))
+		return out
+	}
+
+	var dT, dR, extra []float64
+	esp0 := samples[0].espUs
+	pc0 := samples[0].pcT
+	for i := 1; i < len(samples); i++ {
+		dT = append(dT, float64(samples[i].espUs-samples[i-1].espUs)/1000.0)
+		dR = append(dR, (samples[i].pcT-samples[i-1].pcT)/1000.0)
+		relEsp := float64(samples[i].espUs-esp0) / 1000.0
+		relPc := (samples[i].pcT - pc0) / 1000.0
+		extra = append(extra, relPc-relEsp)
+	}
+
+	period := float64(periodMs)
+	outCount := 0
+	for _, dt := range dT {
+		if math.Abs(dt-period) > tolMs {
+			outCount++
+		}
+	}
+	out.OutsideTol = outCount
+	out.WindowOK = outCount*2 <= len(dT)
+	out.DTEsp = makeLatencyStats(dT)
+	out.DRPc = makeLatencyStats(dR)
+	out.ExtraVsFirst = makeLatencyStats(extra)
+	out.Success = true
+	return out
+}
+
+func makeLatencyStats(v []float64) latencyStats {
+	if len(v) == 0 {
+		return latencyStats{}
+	}
+	s := append([]float64(nil), v...)
+	sort.Float64s(s)
+	return latencyStats{
+		N:      len(s),
+		MinMs:  s[0],
+		MedMs:  percentile(s, 0.5),
+		MeanMs: mean(s),
+		MaxMs:  s[len(s)-1],
+	}
+}
+
+func mean(v []float64) float64 {
+	if len(v) == 0 {
+		return math.NaN()
+	}
+	var s float64
+	for _, x := range v {
+		s += x
+	}
+	return s / float64(len(v))
+}
+
+func percentile(sorted []float64, p float64) float64 {
+	if len(sorted) == 0 {
+		return math.NaN()
+	}
+	if len(sorted) == 1 {
+		return sorted[0]
+	}
+	idx := p * float64(len(sorted)-1)
+	lo := int(idx)
+	hi := lo + 1
+	if hi >= len(sorted) {
+		return sorted[lo]
+	}
+	frac := idx - float64(lo)
+	return sorted[lo]*(1-frac) + sorted[hi]*frac
+}

goTool/cache_status.go

@@ -0,0 +1,83 @@
+package main
+
+import (
+	"fmt"
+
+	"powerpod/gotool/pb"
+
+	"google.golang.org/protobuf/proto"
+)
+
+// accelSamplesFromCacheStatus maps combined CACHE_STATUS entries to AccelSample
+// (for dashboard / WebSocket accel push).
+func accelSamplesFromCacheStatus(r *pb.CacheStatusResponse) []*pb.AccelSample {
+	if r == nil {
+		return nil
+	}
+	out := make([]*pb.AccelSample, 0, len(r.GetClients()))
+	for _, c := range r.GetClients() {
+		if c.GetAccel() == nil {
+			continue
+		}
+		a := c.GetAccel()
+		out = append(out, &pb.AccelSample{
+			ClientId: c.GetClientId(),
+			Valid:    a.GetValid(),
+			X:        a.GetX(),
+			Y:        a.GetY(),
+			Z:        a.GetZ(),
+			AgeMs:    a.GetAgeMs(),
+		})
+	}
+	return out
+}
+
+// tapEventsFromCacheStatus maps combined CACHE_STATUS entries to TapEvent
+// (only clients with a consumed pending tap).
+func tapEventsFromCacheStatus(r *pb.CacheStatusResponse) []*pb.TapEvent {
+	if r == nil {
+		return nil
+	}
+	out := make([]*pb.TapEvent, 0, len(r.GetClients()))
+	for _, c := range r.GetClients() {
+		if c.GetTap() == nil {
+			continue
+		}
+		t := c.GetTap()
+		out = append(out, &pb.TapEvent{
+			ClientId: c.GetClientId(),
+			Valid:    true,
+			Kind:     t.GetKind(),
+			AgeMs:    t.GetAgeMs(),
+		})
+	}
+	return out
+}
+
+// cacheStatusFromBLEStreamPayload parses a framed BLE_STREAM_TICK payload
+// (type byte + protobuf UartMessage) into a CacheStatusResponse-shaped view.
+func cacheStatusFromBLEStreamPayload(payload []byte) (*pb.CacheStatusResponse, error) {
+	tick, err := parseBleStreamTickPayload(payload)
+	if err != nil {
+		return nil, err
+	}
+	return &pb.CacheStatusResponse{Clients: tick.GetClients()}, nil
+}
+
+func parseBleStreamTickPayload(payload []byte) (*pb.BleStreamTick, error) {
+	if len(payload) < 2 {
+		return nil, fmt.Errorf("BLE stream tick too short")
+	}
+	if payload[0] != byte(pb.MessageType_BLE_STREAM_TICK) {
+		return nil, fmt.Errorf("unexpected BLE tick type 0x%02x", payload[0])
+	}
+	var msg pb.UartMessage
+	if err := proto.Unmarshal(payload[1:], &msg); err != nil {
+		return nil, err
+	}
+	tick := msg.GetBleStreamTick()
+	if tick == nil {
+		return nil, fmt.Errorf("missing ble_stream_tick")
+	}
+	return tick, nil
+}

goTool/client_api.go

@@ -2,6 +2,7 @@ package main
 
 import (
 	"fmt"
+	"time"
 
 	"google.golang.org/protobuf/proto"
 
@@ -40,35 +41,349 @@ func (m *managedSerial) listClientsPoll() ([]*pb.ClientInfo, error) {
 	return decodeClientsPayload(payload)
 }
 
+func decodeBatteryStatusPayload(payload []byte) (*pb.BatteryStatusResponse, error) {
+	if len(payload) < 2 {
+		return nil, fmt.Errorf("short battery response")
+	}
+	if payload[0] != byte(pb.MessageType_BATTERY_STATUS) {
+		return nil, fmt.Errorf("unexpected command id 0x%02x (want 0x%02x)",
+			payload[0], byte(pb.MessageType_BATTERY_STATUS))
+	}
+	var msg pb.UartMessage
+	if err := proto.Unmarshal(payload[1:], &msg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	if msg.GetType() != pb.MessageType_BATTERY_STATUS {
+		return nil, fmt.Errorf("unexpected type %v", msg.GetType())
+	}
+	r := msg.GetBatteryStatusResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing battery_status_response")
+	}
+	return r, nil
+}
+
+func (m *managedSerial) BatteryStatus(req *pb.BatteryStatusRequest) (*pb.BatteryStatusResponse, error) {
+	return m.batteryStatusExchange(false, req)
+}
+
+func (m *managedSerial) BatteryStatusPoll(req *pb.BatteryStatusRequest) (*pb.BatteryStatusResponse, error) {
+	return m.batteryStatusExchange(true, req)
+}
+
+func (m *managedSerial) batteryStatusExchange(poll bool, req *pb.BatteryStatusRequest) (*pb.BatteryStatusResponse, error) {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_BATTERY_STATUS,
+		Payload: &pb.UartMessage_BatteryStatusRequest{
+			BatteryStatusRequest: req,
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_BATTERY_STATUS)}, body...)
+	var respPayload []byte
+	if poll {
+		respPayload, err = m.exchangePayloadMode(true, payload, "BATTERY_STATUS", batteryReadTimeout)
+	} else {
+		respPayload, err = m.exchangePayloadMode(false, payload, "BATTERY_STATUS", batteryReadTimeout)
+	}
+	if err != nil {
+		return nil, err
+	}
+	return decodeBatteryStatusPayload(respPayload)
+}
+
+func (s *serialPort) batteryStatus(req *pb.BatteryStatusRequest) (*pb.BatteryStatusResponse, error) {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_BATTERY_STATUS,
+		Payload: &pb.UartMessage_BatteryStatusRequest{
+			BatteryStatusRequest: req,
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_BATTERY_STATUS)}, body...)
+	respPayload, err := s.exchangePayloadForBattery(payload, "BATTERY_STATUS")
+	if err != nil {
+		return nil, err
+	}
+	return decodeBatteryStatusPayload(respPayload)
+}
+
+func (m *managedSerial) AccelStream(req *pb.AccelStreamRequest) (*pb.AccelStreamResponse, error) {
+	return m.accelStreamExchange(false, req)
+}
+
+func (m *managedSerial) AccelStreamPoll(req *pb.AccelStreamRequest) (*pb.AccelStreamResponse, error) {
+	return m.accelStreamExchange(true, req)
+}
+
+// SetAccelStream enables or disables the ESP-NOW accel stream for one slave (master UART).
+func (m *managedSerial) SetAccelStream(clientID uint32, enable bool) (*pb.AccelStreamResponse, error) {
+	return m.AccelStream(&pb.AccelStreamRequest{
+		Write:    true,
+		Enable:   enable,
+		ClientId: clientID,
+	})
+}
+
+// GetAccelStream returns whether the accel stream is enabled for a slave on the master.
+func (m *managedSerial) GetAccelStream(clientID uint32) (bool, error) {
+	resp, err := m.AccelStreamPoll(&pb.AccelStreamRequest{
+		Write:    false,
+		ClientId: clientID,
+	})
+	if err != nil {
+		return false, err
+	}
+	if !resp.GetSuccess() {
+		return false, fmt.Errorf("accel stream read failed for client %d", clientID)
+	}
+	return resp.GetEnabled(), nil
+}
+
+func (m *managedSerial) TapNotify(req *pb.TapNotifyRequest) (*pb.TapNotifyResponse, error) {
+	return m.tapNotifyExchange(false, req)
+}
+
+func (m *managedSerial) TapNotifyPoll(req *pb.TapNotifyRequest) (*pb.TapNotifyResponse, error) {
+	return m.tapNotifyExchange(true, req)
+}
+
+func (m *managedSerial) tapNotifyExchange(poll bool, req *pb.TapNotifyRequest) (*pb.TapNotifyResponse, error) {
+	msg := &pb.UartMessage{
+		Type:    pb.MessageType_TAP_NOTIFY,
+		Payload: &pb.UartMessage_TapNotifyRequest{TapNotifyRequest: req},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_TAP_NOTIFY)}, body...)
+	var respPayload []byte
+	if poll {
+		respPayload, err = m.exchangePayloadPoll(payload, "TAP_NOTIFY")
+	} else {
+		respPayload, err = m.exchangePayload(payload, "TAP_NOTIFY")
+	}
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetTapNotifyResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing tap_notify_response")
+	}
+	return r, nil
+}
+
+func (m *managedSerial) readCacheStatusPoll() (*pb.CacheStatusResponse, error) {
+	payload, err := m.exchangePoll(byte(pb.MessageType_CACHE_STATUS), "CACHE_STATUS")
+	if err != nil {
+		return nil, err
+	}
+	return decodeCacheStatusPayload(payload)
+}
+
+func decodeCacheStatusPayload(payload []byte) (*pb.CacheStatusResponse, error) {
+	if len(payload) < 1 {
+		return nil, fmt.Errorf("empty response payload")
+	}
+	if payload[0] != byte(pb.MessageType_CACHE_STATUS) {
+		return nil, fmt.Errorf("unexpected command id 0x%02x (want 0x%02x)",
+			payload[0], byte(pb.MessageType_CACHE_STATUS))
+	}
+	var msg pb.UartMessage
+	if err := proto.Unmarshal(payload[1:], &msg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	if msg.GetType() != pb.MessageType_CACHE_STATUS {
+		return nil, fmt.Errorf("unexpected type %v", msg.GetType())
+	}
+	r := msg.GetCacheStatusResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing cache_status_response")
+	}
+	return r, nil
+}
+
+func (m *managedSerial) accelStreamExchange(poll bool, req *pb.AccelStreamRequest) (*pb.AccelStreamResponse, error) {
+	msg := &pb.UartMessage{
+		Type:    pb.MessageType_ACCEL_STREAM,
+		Payload: &pb.UartMessage_AccelStreamRequest{AccelStreamRequest: req},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_ACCEL_STREAM)}, body...)
+	var respPayload []byte
+	if poll {
+		respPayload, err = m.exchangePayloadPoll(payload, "ACCEL_STREAM")
+	} else {
+		respPayload, err = m.exchangePayload(payload, "ACCEL_STREAM")
+	}
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetAccelStreamResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing accel_stream_response")
+	}
+	return r, nil
+}
+
 func (m *managedSerial) AccelDeadzone(req *pb.AccelDeadzoneRequest) (*pb.AccelDeadzoneResponse, error) {
-	return m.accelDeadzoneVia(m.withPort, req)
+	return m.accelDeadzoneExchange(false, req)
 }
 
 func (m *managedSerial) AccelDeadzonePoll(req *pb.AccelDeadzoneRequest) (*pb.AccelDeadzoneResponse, error) {
-	return m.accelDeadzoneVia(m.withPortPoll, req)
+	return m.accelDeadzoneExchange(true, req)
 }
 
-func (m *managedSerial) accelDeadzoneVia(
-	portFn func(func(*serialPort) error) error,
-	req *pb.AccelDeadzoneRequest,
-) (*pb.AccelDeadzoneResponse, error) {
-	var resp *pb.AccelDeadzoneResponse
-	err := portFn(func(sp *serialPort) error {
-		var e error
-		resp, e = sp.AccelDeadzone(req)
-		return e
-	})
-	return resp, err
+func (m *managedSerial) TapConfig(req *pb.TapConfigRequest) (*pb.TapConfigResponse, error) {
+	return m.tapConfigExchange(false, req)
+}
+
+func (m *managedSerial) TapConfigPoll(req *pb.TapConfigRequest) (*pb.TapConfigResponse, error) {
+	return m.tapConfigExchange(true, req)
+}
+
+func (m *managedSerial) tapConfigExchange(poll bool, req *pb.TapConfigRequest) (*pb.TapConfigResponse, error) {
+	msg := &pb.UartMessage{
+		Type:    pb.MessageType_TAP_CONFIG,
+		Payload: &pb.UartMessage_TapConfigRequest{TapConfigRequest: req},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_TAP_CONFIG)}, body...)
+	var respPayload []byte
+	if poll {
+		respPayload, err = m.exchangePayloadPoll(payload, "TAP_CONFIG")
+	} else {
+		respPayload, err = m.exchangePayload(payload, "TAP_CONFIG")
+	}
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetTapConfigResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing tap_config_response")
+	}
+	return r, nil
+}
+
+func (m *managedSerial) BatteryUv(req *pb.BatteryUvRequest) (*pb.BatteryUvResponse, error) {
+	return m.batteryUvExchange(false, req)
+}
+
+func (m *managedSerial) BatteryUvPoll(req *pb.BatteryUvRequest) (*pb.BatteryUvResponse, error) {
+	return m.batteryUvExchange(true, req)
+}
+
+func (m *managedSerial) batteryUvExchange(poll bool, req *pb.BatteryUvRequest) (*pb.BatteryUvResponse, error) {
+	msg := &pb.UartMessage{
+		Type:    pb.MessageType_BATTERY_UV,
+		Payload: &pb.UartMessage_BatteryUvRequest{BatteryUvRequest: req},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_BATTERY_UV)}, body...)
+	var respPayload []byte
+	if poll {
+		respPayload, err = m.exchangePayloadPoll(payload, "BATTERY_UV")
+	} else {
+		respPayload, err = m.exchangePayload(payload, "BATTERY_UV")
+	}
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetBatteryUvResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing battery_uv_response")
+	}
+	return r, nil
+}
+
+func (m *managedSerial) accelDeadzoneExchange(poll bool, req *pb.AccelDeadzoneRequest) (*pb.AccelDeadzoneResponse, error) {
+	msg := &pb.UartMessage{
+		Type:    pb.MessageType_ACCEL_DEADZONE,
+		Payload: &pb.UartMessage_AccelDeadzoneRequest{AccelDeadzoneRequest: req},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_ACCEL_DEADZONE)}, body...)
+	var respPayload []byte
+	if poll {
+		respPayload, err = m.exchangePayloadPoll(payload, "ACCEL_DEADZONE")
+	} else {
+		respPayload, err = m.exchangePayload(payload, "ACCEL_DEADZONE")
+	}
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetAccelDeadzoneResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing accel_deadzone_response")
+	}
+	return r, nil
 }
 
 func (m *managedSerial) EspnowUnicastTest(clientID, seq uint32) (*pb.EspNowUnicastTestResponse, error) {
-	var resp *pb.EspNowUnicastTestResponse
-	err := m.withPort(func(sp *serialPort) error {
-		var e error
-		resp, e = sp.EspnowUnicastTest(clientID, seq)
-		return e
-	})
-	return resp, err
+	req := &pb.EspNowUnicastTestRequest{ClientId: clientID, Seq: seq}
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_ESPNOW_UNICAST_TEST,
+		Payload: &pb.UartMessage_EspnowUnicastTestRequest{
+			EspnowUnicastTestRequest: req,
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_ESPNOW_UNICAST_TEST)}, body...)
+	respPayload, err := m.exchangePayload(payload, "ESPNOW_UNICAST_TEST")
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetEspnowUnicastTestResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing espnow_unicast_test_response")
+	}
+	return r, nil
 }
 
 func decodeVersionPayload(payload []byte) (*pb.VersionResponse, error) {
@@ -117,6 +432,68 @@ func (s *serialPort) listClients() ([]*pb.ClientInfo, error) {
 	return decodeClientsPayload(payload)
 }
 
+func (s *serialPort) AccelStream(req *pb.AccelStreamRequest) (*pb.AccelStreamResponse, error) {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_ACCEL_STREAM,
+		Payload: &pb.UartMessage_AccelStreamRequest{
+			AccelStreamRequest: req,
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_ACCEL_STREAM)}, body...)
+	respPayload, err := s.exchangePayload(payload, "ACCEL_STREAM")
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetAccelStreamResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing accel_stream_response")
+	}
+	return r, nil
+}
+
+func (s *serialPort) TapNotify(req *pb.TapNotifyRequest) (*pb.TapNotifyResponse, error) {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_TAP_NOTIFY,
+		Payload: &pb.UartMessage_TapNotifyRequest{
+			TapNotifyRequest: req,
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_TAP_NOTIFY)}, body...)
+	respPayload, err := s.exchangePayload(payload, "TAP_NOTIFY")
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetTapNotifyResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing tap_notify_response")
+	}
+	return r, nil
+}
+
+func (s *serialPort) readCacheStatus() (*pb.CacheStatusResponse, error) {
+	payload, err := s.exchange(byte(pb.MessageType_CACHE_STATUS), "CACHE_STATUS")
+	if err != nil {
+		return nil, err
+	}
+	return decodeCacheStatusPayload(payload)
+}
+
 func (s *serialPort) accelDeadzone(req *pb.AccelDeadzoneRequest) (*pb.AccelDeadzoneResponse, error) {
 	msg := &pb.UartMessage{
 		Type: pb.MessageType_ACCEL_DEADZONE,
@@ -144,6 +521,60 @@ func (s *serialPort) accelDeadzone(req *pb.AccelDeadzoneRequest) (*pb.AccelDeadz
 	return r, nil
 }
 
+func (s *serialPort) tapConfig(req *pb.TapConfigRequest) (*pb.TapConfigResponse, error) {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_TAP_CONFIG,
+		Payload: &pb.UartMessage_TapConfigRequest{
+			TapConfigRequest: req,
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_TAP_CONFIG)}, body...)
+	respPayload, err := s.exchangePayload(payload, "TAP_CONFIG")
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetTapConfigResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing tap_config_response")
+	}
+	return r, nil
+}
+
+func (s *serialPort) batteryUv(req *pb.BatteryUvRequest) (*pb.BatteryUvResponse, error) {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_BATTERY_UV,
+		Payload: &pb.UartMessage_BatteryUvRequest{
+			BatteryUvRequest: req,
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_BATTERY_UV)}, body...)
+	respPayload, err := s.exchangePayload(payload, "BATTERY_UV")
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetBatteryUvResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing battery_uv_response")
+	}
+	return r, nil
+}
+
 func (s *serialPort) espnowUnicastTest(clientID, seq uint32) (*pb.EspNowUnicastTestResponse, error) {
 	req := &pb.EspNowUnicastTestRequest{ClientId: clientID, Seq: seq}
 	msg := &pb.UartMessage{
@@ -172,6 +603,88 @@ func (s *serialPort) espnowUnicastTest(clientID, seq uint32) (*pb.EspNowUnicastT
 	return r, nil
 }
 
+// EchoPingResult is the host-side round-trip for ESP-NOW echo ping.
+type EchoPingResult struct {
+	Success     bool    `json:"success"`
+	ClientID    uint32  `json:"client_id"`
+	TimestampUs uint64  `json:"timestamp_us"`
+	RttMs       float64 `json:"rtt_ms"`     // goTool: full UART round-trip
+	EspRttUs    uint32  `json:"esp_rtt_us"` // master: µs delta ping send → pong recv
+}
+
+func (s *serialPort) echoPing(clientID uint32) (*EchoPingResult, error) {
+	t0 := time.Now()
+	timestampUs := uint64(t0.UnixMicro())
+	req := &pb.EspNowEchoPingRequest{
+		ClientId:    clientID,
+		TimestampUs: timestampUs,
+	}
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_ESPNOW_ECHO_PING,
+		Payload: &pb.UartMessage_EspnowEchoPingRequest{
+			EspnowEchoPingRequest: req,
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_ESPNOW_ECHO_PING)}, body...)
+	respPayload, err := s.exchangePayload(payload, "ESPNOW_ECHO_PING")
+	if err != nil {
+		return nil, err
+	}
+	rttMs := float64(time.Since(t0).Microseconds()) / 1000.0
+
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetEspnowEchoPingResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing espnow_echo_ping_response")
+	}
+	if !r.GetSuccess() {
+		return &EchoPingResult{
+			Success:  false,
+			ClientID: r.GetClientId(),
+			RttMs:    rttMs,
+		}, nil
+	}
+	if r.GetTimestampUs() != timestampUs {
+		return nil, fmt.Errorf("timestamp mismatch: sent %d got %d", timestampUs, r.GetTimestampUs())
+	}
+	return &EchoPingResult{
+		Success:     true,
+		ClientID:    r.GetClientId(),
+		TimestampUs: r.GetTimestampUs(),
+		RttMs:       rttMs,
+		EspRttUs:    r.GetEspRttUs(),
+	}, nil
+}
+
+func (m *managedSerial) FindMe(clientID uint32) error {
+	return hostFindMe(m, clientID)
+}
+
+func (m *managedSerial) SetLogLevel(write bool, level uint32) (*pb.SetLogLevelResponse, error) {
+	return hostSetLogLevel(m, write, level)
+}
+
+func (m *managedSerial) InputSendMode(req *pb.InputSendModeRequest) (*pb.InputSendModeResponse, error) {
+	return hostInputSendMode(m, req)
+}
+
+func (m *managedSerial) Restart(clientID uint32) error {
+	if err := hostRestart(m, clientID); err != nil {
+		return err
+	}
+	if clientID == 0 {
+		m.recoverAfterMasterRestart()
+	}
+	return nil
+}
+
 func (s *serialPort) ledRingProgress(req *pb.LedRingProgressRequest) (*pb.LedRingProgressResponse, error) {
 	msg := &pb.UartMessage{
 		Type: pb.MessageType_LED_RING,
@@ -203,10 +716,68 @@ func (s *serialPort) GetVersion() (*pb.VersionResponse, error) { return s.getVer
 
 func (s *serialPort) ListClients() ([]*pb.ClientInfo, error) { return s.listClients() }
 
+func (s *serialPort) SetAccelStream(clientID uint32, enable bool) (*pb.AccelStreamResponse, error) {
+	return s.AccelStream(&pb.AccelStreamRequest{
+		Write:    true,
+		Enable:   enable,
+		ClientId: clientID,
+	})
+}
+
+func (s *serialPort) GetAccelStream(clientID uint32) (bool, error) {
+	resp, err := s.AccelStream(&pb.AccelStreamRequest{
+		Write:    false,
+		ClientId: clientID,
+	})
+	if err != nil {
+		return false, err
+	}
+	if !resp.GetSuccess() {
+		return false, fmt.Errorf("accel stream read failed for client %d", clientID)
+	}
+	return resp.GetEnabled(), nil
+}
+
 func (s *serialPort) AccelDeadzone(req *pb.AccelDeadzoneRequest) (*pb.AccelDeadzoneResponse, error) {
 	return s.accelDeadzone(req)
 }
 
+func (s *serialPort) TapConfig(req *pb.TapConfigRequest) (*pb.TapConfigResponse, error) {
+	return s.tapConfig(req)
+}
+
+func (s *serialPort) BatteryUv(req *pb.BatteryUvRequest) (*pb.BatteryUvResponse, error) {
+	return s.batteryUv(req)
+}
+
 func (s *serialPort) EspnowUnicastTest(clientID, seq uint32) (*pb.EspNowUnicastTestResponse, error) {
 	return s.espnowUnicastTest(clientID, seq)
 }
+
+func (s *serialPort) EchoPing(clientID uint32) (*EchoPingResult, error) {
+	return s.echoPing(clientID)
+}
+
+func (m *managedSerial) EchoPing(clientID uint32) (*EchoPingResult, error) {
+	return hostEchoPing(m, clientID)
+}
+
+func (s *serialPort) LedRing(req *pb.LedRingProgressRequest) (*pb.LedRingProgressResponse, error) {
+	return s.ledRingProgress(req)
+}
+
+func (m *managedSerial) LedRing(req *pb.LedRingProgressRequest) (*pb.LedRingProgressResponse, error) {
+	return hostLedRing(m, req)
+}
+
+func (s *serialPort) FindMe(clientID uint32) (*pb.EspNowFindMeResponse, error) {
+	return s.espnowFindMe(clientID)
+}
+
+func (s *serialPort) Restart(clientID uint32) (*pb.RestartResponse, error) {
+	return s.restart(clientID)
+}
+
+func (s *serialPort) OtaSlaveProgress(clientID uint32) (*pb.OtaSlaveProgressResponse, error) {
+	return QueryOtaSlaveProgress(s, clientID)
+}

goTool/cmd_accel_stream.go

@@ -0,0 +1,44 @@
+package main
+
+import (
+	"flag"
+	"fmt"
+
+	pb "powerpod/gotool/pb"
+)
+
+func runAccelStreamCmd(h hostConn, args []string) error {
+	fs := flag.NewFlagSet("accel-stream", flag.ExitOnError)
+	clientID := fs.Uint("client", 0, "slave client id (0 with -all)")
+	all := fs.Bool("all", false, "all registered clients")
+	enable := fs.Bool("enable", true, "enable stream")
+	disable := fs.Bool("disable", false, "disable stream")
+	period := fs.Uint("period", 0, "BLE push period_ms 10–16 (0=leave/default)")
+	if err := fs.Parse(args); err != nil {
+		return err
+	}
+	on := *enable
+	if *disable {
+		on = false
+	}
+	if !*all && *clientID == 0 {
+		return fmt.Errorf("need -client ID or -all")
+	}
+	req := &pb.AccelStreamRequest{
+		Write:    true,
+		Enable:   on,
+		PeriodMs: uint32(*period),
+	}
+	if *all {
+		req.AllClients = true
+	} else {
+		req.ClientId = uint32(*clientID)
+	}
+	r, err := hostAccelStream(h, req)
+	if err != nil {
+		return err
+	}
+	fmt.Printf("accel-stream: success=%v enabled=%v client_id=%d slaves_updated=%d\n",
+		r.GetSuccess(), r.GetEnabled(), r.GetClientId(), r.GetSlavesUpdated())
+	return nil
+}

goTool/cmd_autotest.go

@@ -62,6 +62,8 @@ func runTest(portOverride string, baudOverride int, args []string) error {
 	if err != nil {
 		return fmt.Errorf("open %s: %w", port, err)
 	}
+	registerShutdown(func() { _ = sp.Close() })
+	enableShutdownOnInterrupt()
 	defer sp.Close()
 
 	if !*verbose {

goTool/cmd_battery_uv.go

@@ -0,0 +1,34 @@
+package main
+
+import (
+	"flag"
+	"fmt"
+
+	"powerpod/gotool/pb"
+)
+
+func runBatteryUv(sp *serialPort, args []string) error {
+	fs := flag.NewFlagSet("battery-uv", flag.ExitOnError)
+	write := fs.Bool("set", false, "write UV protection enable (default: read)")
+	enabled := fs.Bool("enable", false, "enable software UV protection")
+	clientID := fs.Uint("client", 0, "client id (0=local master)")
+	all := fs.Bool("all", false, "apply to master + all registered slaves")
+	if err := fs.Parse(args); err != nil {
+		return err
+	}
+
+	r, err := sp.batteryUv(&pb.BatteryUvRequest{
+		Write:      *write,
+		Enabled:    *enabled,
+		ClientId:   uint32(*clientID),
+		AllClients: *all,
+	})
+	if err != nil {
+		return err
+	}
+
+	fmt.Printf("client_id=%d success=%v enabled=%v latched=%v slaves_updated=%d\n",
+		r.GetClientId(), r.GetSuccess(), r.GetEnabled(), r.GetLatched(),
+		r.GetSlavesUpdated())
+	return nil
+}

goTool/cmd_ble_rtt.go

@@ -0,0 +1,26 @@
+package main
+
+import (
+	"flag"
+	"fmt"
+	"time"
+)
+
+func runBleRtt(h hostConn, args []string) error {
+	fs := flag.NewFlagSet("ble-rtt", flag.ExitOnError)
+	count := fs.Int("count", 50, "number of measured VERSION round-trips")
+	settle := fs.Float64("settle", 0, "extra settle seconds before measurement (0 = already settled on connect)")
+	warmup := fs.Int("warmup", 5, "discarded warm-up round-trips")
+	if err := fs.Parse(args); err != nil {
+		return err
+	}
+
+	out := measureBleRtt(h, *count, *warmup, time.Duration(*settle*float64(time.Second)))
+	if !out.Success {
+		return fmt.Errorf("%s", out.Error)
+	}
+	fmt.Printf("ble-rtt (VERSION): n=%d warmup=%d\n", out.Stats.N, out.Warmup)
+	fmt.Printf("  min=%.3f  median=%.3f  mean=%.3f  max=%.3f  ms\n",
+		out.Stats.MinMs, out.Stats.MedMs, out.Stats.MeanMs, out.Stats.MaxMs)
+	return nil
+}

goTool/cmd_ble_stream.go

@@ -0,0 +1,40 @@
+package main
+
+import (
+	"flag"
+	"fmt"
+)
+
+func runBleStream(h hostConn, args []string) error {
+	fs := flag.NewFlagSet("ble-stream", flag.ExitOnError)
+	clientID := fs.Uint("client", 0, "slave client id (0 = all_clients)")
+	periodMs := fs.Uint("period", 10, "BLE push period_ms (10–16)")
+	count := fs.Int("count", 50, "number of BleStreamTick samples")
+	tolMs := fs.Float64("tol", 2.0, "tolerance ms around period for window_ok")
+	duration := fs.Float64("timeout", 15.0, "max seconds waiting for ticks")
+	if err := fs.Parse(args); err != nil {
+		return err
+	}
+
+	fmt.Printf("accel stream on; period_ms=%d; collecting %d ticks…\n", *periodMs, *count)
+	out := measureBleStream(h, uint32(*clientID), uint32(*periodMs), *count, *tolMs, *duration)
+	if !out.Success {
+		return fmt.Errorf("%s", out.Error)
+	}
+	fmt.Printf("received=%d/%d period_ms=%d tol=±%.1f ms\n", out.Received, out.Requested, out.PeriodMs, out.TolMs)
+	printStat("dT ESP inter-depart", out.DTEsp)
+	printStat("dR PC  inter-arrive", out.DRPc)
+	printStat("extra vs first", out.ExtraVsFirst)
+	fmt.Printf("outside_tol=%d/%d  window_ok=%s\n", out.OutsideTol, out.DTEsp.N,
+		map[bool]string{true: "yes", false: "no"}[out.WindowOK])
+	return nil
+}
+
+func printStat(name string, s latencyStats) {
+	if s.N == 0 {
+		fmt.Printf("%s: (none)\n", name)
+		return
+	}
+	fmt.Printf("%s: n=%d  min=%.3f  median=%.3f  mean=%.3f  max=%.3f  ms\n",
+		name, s.N, s.MinMs, s.MedMs, s.MeanMs, s.MaxMs)
+}

goTool/cmd_cache_status.go

@@ -0,0 +1,33 @@
+package main
+
+import (
+	"fmt"
+)
+
+func runCacheStatus(sp *serialPort) error {
+	r, err := sp.readCacheStatus()
+	if err != nil {
+		return err
+	}
+	clients := r.GetClients()
+	if len(clients) == 0 {
+		fmt.Println("(no slaves with accel stream or tap notify enabled)")
+		return nil
+	}
+	for _, c := range clients {
+		id := c.GetClientId()
+		if a := c.GetAccel(); a != nil {
+			if !a.GetValid() {
+				fmt.Printf("client %d accel: no sample yet\n", id)
+			} else {
+				fmt.Printf("client %d accel: x=%d y=%d z=%d (age %d ms)\n",
+					id, a.GetX(), a.GetY(), a.GetZ(), a.GetAgeMs())
+			}
+		}
+		if t := c.GetTap(); t != nil {
+			fmt.Printf("client %d tap: %s (age %d ms)\n",
+				id, tapKindLabel(t.GetKind()), t.GetAgeMs())
+		}
+	}
+	return nil
+}

goTool/cmd_clients.go

@@ -18,9 +18,17 @@ func runClients(sp *serialPort) error {
 	fmt.Printf("clients (%d):\n", len(clients))
 	for i, c := range clients {
 		mac := hex.EncodeToString(c.GetMac())
-		fmt.Printf("  [%d] id=%d mac=%s ver=%d available=%v used=%v last_ping=%d last_success_ping=%d\n",
+		fmt.Printf("  [%d] id=%d mac=%s ver=%d available=%v used=%v last_ping=%d last_success_ping=%d tap=%s/%s/%s\n",
 			i, c.GetId(), mac, c.GetVersion(), c.GetAvailable(), c.GetUsed(),
-			c.GetLastPing(), c.GetLastSuccessPing())
+			c.GetLastPing(), c.GetLastSuccessPing(),
+			boolFlag(c.GetTapNotifySingle()), boolFlag(c.GetTapNotifyDouble()), boolFlag(c.GetTapNotifyTriple()))
 	}
 	return nil
 }
+
+func boolFlag(v bool) string {
+	if v {
+		return "on"
+	}
+	return "off"
+}

goTool/cmd_clients_reset_ids.go

@@ -0,0 +1,55 @@
+package main
+
+import (
+	"fmt"
+
+	"google.golang.org/protobuf/proto"
+	"powerpod/gotool/pb"
+)
+
+func runClientsResetIds(sp *serialPort) error {
+	resp, err := sp.resetClientIdMap()
+	if err != nil {
+		return err
+	}
+	if !resp.GetSuccess() {
+		return fmt.Errorf("client id map reset rejected")
+	}
+	fmt.Println("client id map cleared (master map + live registry; online slaves notified)")
+	return nil
+}
+
+func decodeClientIdMapResetPayload(payload []byte) (*pb.ClientIdMapResetResponse, error) {
+	if len(payload) < 2 {
+		return nil, fmt.Errorf("short client id map reset response")
+	}
+	if payload[0] != byte(pb.MessageType_CLIENT_ID_MAP_RESET) {
+		return nil, fmt.Errorf("unexpected command id 0x%02x (want 0x%02x)",
+			payload[0], byte(pb.MessageType_CLIENT_ID_MAP_RESET))
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(payload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetClientIdMapResetResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing client_id_map_reset_response")
+	}
+	return r, nil
+}
+
+func (s *serialPort) resetClientIdMap() (*pb.ClientIdMapResetResponse, error) {
+	payload, err := s.exchange(byte(pb.MessageType_CLIENT_ID_MAP_RESET), "CLIENT_ID_MAP_RESET")
+	if err != nil {
+		return nil, err
+	}
+	return decodeClientIdMapResetPayload(payload)
+}
+
+func (m *managedSerial) resetClientIdMap() (*pb.ClientIdMapResetResponse, error) {
+	payload, err := m.exchange(byte(pb.MessageType_CLIENT_ID_MAP_RESET), "CLIENT_ID_MAP_RESET")
+	if err != nil {
+		return nil, err
+	}
+	return decodeClientIdMapResetPayload(payload)
+}

goTool/cmd_echo_ping.go

@@ -0,0 +1,26 @@
+package main
+
+import (
+	"flag"
+	"fmt"
+)
+
+func runEchoPing(sp *serialPort, args []string) error {
+	fs := flag.NewFlagSet("echo-ping", flag.ExitOnError)
+	clientID := fs.Uint("client", 0, "slave client id from `clients`")
+	if err := fs.Parse(args); err != nil {
+		return err
+	}
+	if *clientID == 0 {
+		return fmt.Errorf("client id required (see `gotool clients`)")
+	}
+
+	r, err := sp.echoPing(uint32(*clientID))
+	if err != nil {
+		return err
+	}
+
+	fmt.Printf("echo ping: success=%v client_id=%d rtt_ms=%.3f esp_rtt_us=%d\n",
+		r.Success, r.ClientID, r.RttMs, r.EspRttUs)
+	return nil
+}

goTool/cmd_find_me.go

@@ -0,0 +1,61 @@
+package main
+
+import (
+	"flag"
+	"fmt"
+
+	"google.golang.org/protobuf/proto"
+	"powerpod/gotool/pb"
+)
+
+func runFindMe(sp *serialPort, args []string) error {
+	fs := flag.NewFlagSet("find-me", flag.ExitOnError)
+	clientID := fs.Uint("client", 0, "0=master LED ring, >0=ESP-NOW unicast to slave id")
+	if err := fs.Parse(args); err != nil {
+		return err
+	}
+	return runFindMeClient(sp, uint32(*clientID))
+}
+
+func runFindMeClient(sp *serialPort, clientID uint32) error {
+	resp, err := sp.espnowFindMe(clientID)
+	if err != nil {
+		return err
+	}
+	if !resp.GetSuccess() {
+		return fmt.Errorf("find-me rejected (client_id=%d)", resp.GetClientId())
+	}
+	if clientID == 0 {
+		fmt.Println("find-me started on master")
+	} else {
+		fmt.Printf("find-me sent to slave %d\n", clientID)
+	}
+	return nil
+}
+
+func (s *serialPort) espnowFindMe(clientID uint32) (*pb.EspNowFindMeResponse, error) {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_FIND_ME,
+		Payload: &pb.UartMessage_EspnowFindMeRequest{
+			EspnowFindMeRequest: &pb.EspNowFindMeRequest{ClientId: clientID},
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_FIND_ME)}, body...)
+	respPayload, err := s.exchangePayload(payload, "FIND_ME")
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetEspnowFindMeResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing espnow_find_me_response")
+	}
+	return r, nil
+}

goTool/cmd_input_send_mode.go

@@ -0,0 +1,42 @@
+package main
+
+import (
+	"flag"
+	"fmt"
+
+	pb "powerpod/gotool/pb"
+)
+
+func runInputSendModeCmd(h hostConn, args []string) error {
+	fs := flag.NewFlagSet("input-send-mode", flag.ExitOnError)
+	write := fs.Bool("set", false, "write mode to slave(s)")
+	mode := fs.Uint("mode", 0, "0=best_effort 1=fast 2=wait 3=reliable")
+	clientID := fs.Uint("client", 0, "slave client_id (required unless -all)")
+	all := fs.Bool("all", false, "apply to every registered slave")
+	_ = fs.Parse(args)
+
+	req := &pb.InputSendModeRequest{
+		Write:      *write,
+		Mode:       pb.InputSendMode(*mode),
+		ClientId:   uint32(*clientID),
+		AllClients: *all,
+	}
+	if *write && !*all && *clientID == 0 {
+		return fmt.Errorf("need -client N or -all when using -set")
+	}
+	if *write && *mode > uint(pb.InputSendMode_INPUT_SEND_RELIABLE) {
+		return fmt.Errorf("mode must be 0..3")
+	}
+
+	r, err := hostInputSendMode(h, req)
+	if err != nil {
+		return err
+	}
+	fmt.Printf("input-send-mode: success=%v mode=%d (%s) client_id=%d slaves_updated=%d\n",
+		r.GetSuccess(), r.GetMode(), inputSendModeName(r.GetMode()), r.GetClientId(),
+		r.GetSlavesUpdated())
+	if *write && !r.GetSuccess() {
+		return fmt.Errorf("input-send-mode rejected")
+	}
+	return nil
+}

goTool/cmd_led_ring.go

@@ -7,16 +7,12 @@ import (
 	"powerpod/gotool/pb"
 )
 
-const (
-	ledRingModeClear    = 0
-	ledRingModeProgress = 1
-	ledRingModeDigit    = 2
-	ledRingModeBlink    = 3
-)
-
 func runLedRing(sp *serialPort, args []string) error {
 	fs := flag.NewFlagSet("led-ring", flag.ExitOnError)
-	mode := fs.String("mode", "progress", "clear, progress, digit, or blink")
+	mode := fs.String("mode", "progress", "clear, color, progress, digit, blink, find-me, or battery-low")
+	clientID := fs.Uint("client", 0, "0=master ring, >0=slave via ESP-NOW")
+	allClients := fs.Bool("all", false, "broadcast to all slaves")
+	slavesOnly := fs.Bool("slaves-only", false, "with -all: do not change master ring")
 	progress := fs.Uint("progress", 0, "fill level 0–100 (mode=progress)")
 	digit := fs.Uint("digit", 0, "digit 0–10 (mode=digit)")
 	r := fs.Uint("r", 0, "red 0–255")
@@ -29,18 +25,9 @@ func runLedRing(sp *serialPort, args []string) error {
 		return err
 	}
 
-	var modeVal uint32
-	switch *mode {
-	case "clear":
-		modeVal = ledRingModeClear
-	case "progress":
-		modeVal = ledRingModeProgress
-	case "digit":
-		modeVal = ledRingModeDigit
-	case "blink":
-		modeVal = ledRingModeBlink
-	default:
-		return fmt.Errorf("unknown -mode %q (clear, progress, digit, blink)", *mode)
+	modeVal, err := ledRingModeFromString(*mode)
+	if err != nil {
+		return err
 	}
 
 	resp, err := sp.ledRingProgress(&pb.LedRingProgressRequest{
@@ -53,11 +40,15 @@ func runLedRing(sp *serialPort, args []string) error {
 		Intensity:  uint32(*intensity),
 		BlinkMs:    uint32(*blinkMs),
 		BlinkCount: uint32(*blinkCount),
+		ClientId:   uint32(*clientID),
+		AllClients: *allClients,
+		SlavesOnly: *slavesOnly,
 	})
 	if err != nil {
 		return err
 	}
-	fmt.Printf("success=%v mode=%d progress=%d digit=%d\n",
-		resp.GetSuccess(), resp.GetMode(), resp.GetProgress(), resp.GetDigit())
+	fmt.Printf("success=%v mode=%d progress=%d digit=%d client_id=%d slaves_updated=%d\n",
+		resp.GetSuccess(), resp.GetMode(), resp.GetProgress(), resp.GetDigit(),
+		resp.GetClientId(), resp.GetSlavesUpdated())
 	return nil
 }

goTool/cmd_log_level.go

@@ -0,0 +1,61 @@
+package main
+
+import (
+	"flag"
+	"fmt"
+
+	"google.golang.org/protobuf/proto"
+	"powerpod/gotool/pb"
+)
+
+func runLogLevel(sp *serialPort, args []string) error {
+	fs := flag.NewFlagSet("log-level", flag.ExitOnError)
+	write := fs.Bool("set", false, "write log level (default: read)")
+	level := fs.Uint("level", 0, "esp_log_level_t 0–5 (with -set)")
+	if err := fs.Parse(args); err != nil {
+		return err
+	}
+	resp, err := sp.setLogLevel(*write, uint32(*level))
+	if err != nil {
+		return err
+	}
+	if !resp.GetSuccess() {
+		return fmt.Errorf("set_log_level rejected (level=%d)", resp.GetLevel())
+	}
+	fmt.Printf("log_level=%d success=%v\n", resp.GetLevel(), resp.GetSuccess())
+	return nil
+}
+
+func runSetLogLevelClient(sp *serialPort, write bool, level uint32) (*pb.SetLogLevelResponse, error) {
+	return sp.setLogLevel(write, level)
+}
+
+func (s *serialPort) setLogLevel(write bool, level uint32) (*pb.SetLogLevelResponse, error) {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_SET_LOG_LEVEL,
+		Payload: &pb.UartMessage_SetLogLevelRequest{
+			SetLogLevelRequest: &pb.SetLogLevelRequest{
+				Write: write,
+				Level: level,
+			},
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_SET_LOG_LEVEL)}, body...)
+	respPayload, err := s.exchangePayload(payload, "SET_LOG_LEVEL")
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetSetLogLevelResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing set_log_level_response")
+	}
+	return r, nil
+}

goTool/cmd_ota.go

@@ -5,7 +5,7 @@ import (
 	"os"
 )
 
-func runOTA(sp *serialPort, args []string) error {
+func runOTA(t otaTransport, args []string) error {
 	if len(args) < 1 {
 		return fmt.Errorf("usage: ota <firmware.bin>")
 	}
@@ -14,10 +14,17 @@ func runOTA(sp *serialPort, args []string) error {
 		return err
 	}
 
-	sp.mu.Lock()
-	defer sp.mu.Unlock()
-	m := &managedSerial{quiet: false, sp: sp}
-	return runOTAOnPortUnlocked(m, data, func(p OTAProgress) {
+	switch x := t.(type) {
+	case *serialPort:
+		x.mu.Lock()
+		defer x.mu.Unlock()
+	case *bleLink:
+		if err := x.ensureOTAMTU(); err != nil {
+			return err
+		}
+	}
+
+	return runOTAUnlocked(t, data, func(p OTAProgress) {
 		switch p.Phase {
 		case "preparing", "ready":
 			fmt.Println(p.Message)

goTool/cmd_ota_progress.go

@@ -5,14 +5,19 @@ import (
 	"fmt"
 )
 
-func runOtaProgress(sp *serialPort, args []string) error {
+func runOtaProgress(t otaTransport, args []string) error {
 	fs := flag.NewFlagSet("ota-progress", flag.ExitOnError)
 	clientID := fs.Uint("client", 0, "slave client id (0 = all in session)")
 	if err := fs.Parse(args); err != nil {
 		return err
 	}
 
-	r, err := QueryOtaSlaveProgress(sp, uint32(*clientID))
+	if sp, ok := t.(*serialPort); ok {
+		sp.mu.Lock()
+		defer sp.mu.Unlock()
+	}
+
+	r, err := QueryOtaSlaveProgress(t, uint32(*clientID))
 	if err != nil {
 		return err
 	}

goTool/cmd_restart.go

@@ -0,0 +1,61 @@
+package main
+
+import (
+	"flag"
+	"fmt"
+
+	"google.golang.org/protobuf/proto"
+	"powerpod/gotool/pb"
+)
+
+func runRestart(sp *serialPort, args []string) error {
+	fs := flag.NewFlagSet("restart", flag.ExitOnError)
+	clientID := fs.Uint("client", 0, "0=master, >0=ESP-NOW unicast to slave id")
+	if err := fs.Parse(args); err != nil {
+		return err
+	}
+	return runRestartClient(sp, uint32(*clientID))
+}
+
+func runRestartClient(sp *serialPort, clientID uint32) error {
+	resp, err := sp.restart(clientID)
+	if err != nil {
+		return err
+	}
+	if !resp.GetSuccess() {
+		return fmt.Errorf("restart rejected (client_id=%d)", resp.GetClientId())
+	}
+	if clientID == 0 {
+		fmt.Println("restart scheduled on master")
+	} else {
+		fmt.Printf("restart sent to slave %d\n", clientID)
+	}
+	return nil
+}
+
+func (s *serialPort) restart(clientID uint32) (*pb.RestartResponse, error) {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_RESTART,
+		Payload: &pb.UartMessage_RestartRequest{
+			RestartRequest: &pb.RestartRequest{ClientId: clientID},
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_RESTART)}, body...)
+	respPayload, err := s.exchangePayload(payload, "RESTART")
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetRestartResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing restart_response")
+	}
+	return r, nil
+}

goTool/cmd_serve.go

@@ -2,6 +2,7 @@ package main
 
 import (
 	"embed"
+	"errors"
 	"flag"
 	"fmt"
 	"io/fs"
@@ -19,28 +20,76 @@ var wsUpgrader = websocket.Upgrader{
 	CheckOrigin: func(r *http.Request) bool { return true },
 }
 
-func runServe(portName string, baud int, args []string) error {
+type serveOpts struct {
+	portName string
+	baud     int
+	useBLE   bool
+	bleName  string
+	settle   time.Duration
+}
+
+func runServe(opts serveOpts, args []string) error {
 	serveFlags := flag.NewFlagSet("serve", flag.ExitOnError)
-	addr := serveFlags.String("addr", ":8080", "HTTP listen address")
-	interval := serveFlags.Duration("interval", 2*time.Second, "UART poll interval")
+	addr := serveFlags.String("addr", ":8080", "dashboard HTTP listen address")
+	apiAddr := serveFlags.String("api-addr", ":8081", "external API HTTP listen address (empty to disable)")
+	accelInterval := serveFlags.Duration("accel-interval", defaultAccelStreamInterval, "accel WebSocket sample period on API server")
+	interval := serveFlags.Duration("interval", 2*time.Second, "host poll interval")
 	if err := serveFlags.Parse(args); err != nil {
 		return err
 	}
-	if portName == "" {
-		return fmt.Errorf("serve requires -port (master UART)")
+	if opts.useBLE && opts.portName != "" {
+		return fmt.Errorf("use either -port or -ble, not both")
 	}
 
-	link := newManagedSerial(portName, baud)
+	link := newManagedHost(opts.baud)
 	link.quiet = true
-	defer link.Close()
+	link.settle = opts.settle
+	if opts.settle <= 0 {
+		link.settle = time.Second
+	}
+
+	switch {
+	case opts.portName != "":
+		if err := link.ConnectUART(opts.portName, opts.baud); err != nil {
+			log.Printf("initial UART connect failed (UI can retry): %v", err)
+		}
+	case opts.useBLE:
+		name := opts.bleName
+		if name == "" {
+			name = bleDefaultName
+		}
+		if err := link.ConnectBLE("", name); err != nil {
+			log.Printf("initial BLE connect failed (UI can scan/retry): %v", err)
+		}
+	}
 
 	hub := newWSHub()
+	streamCtl := newAccelStreamCtl()
+	tapCtl := newTapNotifyCtl()
 	stop := make(chan struct{})
-	defer close(stop)
-	go runPoller(link, portName, hub, *interval, stop)
+
+	var dashSrv *http.Server
+	var apiSrv *http.Server
+	registerShutdown(func() {
+		close(stop)
+		shutdownHTTPServer(dashSrv)
+		shutdownAPIServer(apiSrv)
+		if err := link.Close(); err != nil {
+			log.Printf("host close: %v", err)
+		}
+	})
+
+	go runPoller(link, link.Endpoint(), hub, streamCtl, tapCtl, *interval, stop)
+	go runBatteryPoller(link, hub, 5*time.Second, stop)
+	go runCacheStatusDashboardPoller(link, hub, *accelInterval, stop)
+	go runBLEStreamDashboardPoller(link, hub, streamCtl, stop)
+
+	if *apiAddr != "" {
+		apiSrv = runAPIServer(link.Endpoint(), link, *apiAddr, *accelInterval, hub, streamCtl, tapCtl, stop)
+	}
 
 	mux := http.NewServeMux()
-	mountServeAPI(mux, link, hub)
+	mountServeAPI(mux, link, hub, streamCtl, tapCtl)
 	mux.HandleFunc("/ws", func(w http.ResponseWriter, r *http.Request) {
 		conn, err := wsUpgrader.Upgrade(w, r, nil)
 		if err != nil {
@@ -64,7 +113,21 @@ func runServe(portName string, baud int, args []string) error {
 	}
 	mux.Handle("/", http.FileServer(http.FS(ui)))
 
-	log.Printf("dashboard http://localhost%s  (UART %s @ %d baud, poll %s, auto-reconnect)",
-		*addr, portName, baud, interval.String())
-	return http.ListenAndServe(*addr, mux)
+	log.Printf("dashboard http://localhost%s  (transport=%s endpoint=%q poll %s, live-stream %s)",
+		*addr, link.Transport(), link.Endpoint(), interval.String(), accelInterval.String())
+	if *apiAddr == "" {
+		log.Printf("external API disabled (-api-addr \"\")")
+	} else {
+		log.Printf("external API http://localhost%s  ws://localhost%s/ws", *apiAddr, *apiAddr)
+	}
+
+	dashSrv = &http.Server{Addr: *addr, Handler: mux}
+	go func() {
+		if err := dashSrv.ListenAndServe(); err != nil && !errors.Is(err, http.ErrServerClosed) {
+			log.Printf("dashboard server: %v", err)
+		}
+	}()
+
+	waitForShutdown()
+	return nil
 }

goTool/cmd_tap.go

@@ -0,0 +1,58 @@
+package main
+
+import (
+	"flag"
+	"fmt"
+
+	"powerpod/gotool/pb"
+)
+
+func runTapNotify(sp *serialPort, args []string) error {
+	fs := flag.NewFlagSet("tap-notify", flag.ExitOnError)
+	write := fs.Bool("set", false, "write tap notify flags (default: read)")
+	clientID := fs.Uint("client", 0, "client id (>0 required for read/set one slave)")
+	all := fs.Bool("all", false, "apply to all registered slaves (with -set)")
+	single := fs.Bool("single", false, "notify on single tap")
+	doubleTap := fs.Bool("double", false, "notify on double tap")
+	triple := fs.Bool("triple", false, "notify on triple tap")
+	if err := fs.Parse(args); err != nil {
+		return err
+	}
+
+	if !*write && (*all || *clientID == 0) {
+		return fmt.Errorf("read requires -client <id>")
+	}
+	if *write && !*all && *clientID == 0 {
+		return fmt.Errorf("set requires -client <id> or -all")
+	}
+
+	r, err := sp.TapNotify(&pb.TapNotifyRequest{
+		Write:      *write,
+		ClientId:   uint32(*clientID),
+		AllClients: *all,
+		Single:     *single,
+		DoubleTap:  *doubleTap,
+		Triple:     *triple,
+	})
+	if err != nil {
+		return err
+	}
+
+	fmt.Printf("client_id=%d success=%v slaves_updated=%d single=%v double=%v triple=%v\n",
+		r.GetClientId(), r.GetSuccess(), r.GetSlavesUpdated(),
+		r.GetSingle(), r.GetDoubleTap(), r.GetTriple())
+	return nil
+}
+
+func tapKindLabel(k pb.TapKind) string {
+	switch k {
+	case pb.TapKind_TAP_SINGLE:
+		return "single"
+	case pb.TapKind_TAP_DOUBLE:
+		return "double"
+	case pb.TapKind_TAP_TRIPLE:
+		return "triple"
+	default:
+		return "none"
+	}
+}

goTool/cmd_tap_config.go

@@ -0,0 +1,54 @@
+package main
+
+import (
+	"flag"
+	"fmt"
+
+	"powerpod/gotool/pb"
+)
+
+func runTapConfig(sp *serialPort, args []string) error {
+	fs := flag.NewFlagSet("tap-config", flag.ExitOnError)
+	write := fs.Bool("set", false, "write tap config (default: read)")
+	clientID := fs.Uint("client", 0, "client id (0=local master BMA456)")
+	all := fs.Bool("all", false, "apply to all registered slaves (master only)")
+	sens := fs.Uint("sens", 5, "tap_sens_thres 0=most … 15=least")
+	maxGest := fs.Uint("max-gest", 100, "max_gest_dur (×5 ms)")
+	shock := fs.Uint("shock", 6, "tap_shock_dur (×5 ms)")
+	quiet := fs.Uint("quiet", 60, "quite_time_after_gest (×5 ms)")
+	wait := fs.Uint("wait", 0, "wait_for_timeout 0|1")
+	axis := fs.Uint("axis", 2, "axis_sel 0=X 1=Y 2=Z")
+	single := fs.Bool("single", true, "enable single tap")
+	doubleTap := fs.Bool("double", true, "enable double tap")
+	triple := fs.Bool("triple", true, "enable triple tap")
+	if err := fs.Parse(args); err != nil {
+		return err
+	}
+
+	r, err := sp.tapConfig(&pb.TapConfigRequest{
+		Write:              *write,
+		ClientId:           uint32(*clientID),
+		AllClients:         *all,
+		TapSensThres:       uint32(*sens),
+		MaxGestDur:         uint32(*maxGest),
+		TapShockDur:        uint32(*shock),
+		QuiteTimeAfterGest: uint32(*quiet),
+		WaitForTimeout:     uint32(*wait),
+		AxisSel:            uint32(*axis),
+		EnableSingle:       *single,
+		EnableDouble:       *doubleTap,
+		EnableTriple:       *triple,
+	})
+	if err != nil {
+		return err
+	}
+
+	fmt.Printf("client_id=%d success=%v slaves_updated=%d\n",
+		r.GetClientId(), r.GetSuccess(), r.GetSlavesUpdated())
+	fmt.Printf("  sens=%d max_gest=%d shock=%d quiet=%d wait=%d axis=%d\n",
+		r.GetTapSensThres(), r.GetMaxGestDur(), r.GetTapShockDur(),
+		r.GetQuiteTimeAfterGest(), r.GetWaitForTimeout(), r.GetAxisSel())
+	fmt.Printf("  enable single=%v double=%v triple=%v\n",
+		r.GetEnableSingle(), r.GetEnableDouble(), r.GetEnableTriple())
+	return nil
+}

goTool/dashboard.go

@@ -15,39 +15,145 @@ import (
 )
 
 type MasterView struct {
-	Version           uint32 `json:"version"`
-	GitHash           string `json:"git_hash"`
-	RunningPartition  string `json:"running_partition,omitempty"`
-	Deadzone          uint32 `json:"deadzone,omitempty"`
-	OK                bool   `json:"ok"`
-	Error             string `json:"error,omitempty"`
+	Version          uint32          `json:"version"`
+	GitHash          string          `json:"git_hash"`
+	RunningPartition string          `json:"running_partition,omitempty"`
+	Deadzone         uint32          `json:"deadzone,omitempty"`
+	TapConfig        *TapConfigView  `json:"tap_config,omitempty"`
+	UvProtection     *bool           `json:"uv_protection,omitempty"`
+	UvLatched        bool            `json:"uv_latched,omitempty"`
+	Lipo1            lipoReadingJSON `json:"lipo1"`
+	Lipo2            lipoReadingJSON `json:"lipo2"`
+	BatteryAgeMs     uint32          `json:"battery_age_ms,omitempty"`
+	OK               bool            `json:"ok"`
+	Error            string          `json:"error,omitempty"`
+}
+
+type TapConfigView struct {
+	TapSensThres       uint32 `json:"tap_sens_thres"`
+	MaxGestDur         uint32 `json:"max_gest_dur"`
+	TapShockDur        uint32 `json:"tap_shock_dur"`
+	QuiteTimeAfterGest uint32 `json:"quite_time_after_gest"`
+	WaitForTimeout     uint32 `json:"wait_for_timeout"`
+	AxisSel            uint32 `json:"axis_sel"`
+	EnableSingle       bool   `json:"enable_single"`
+	EnableDouble       bool   `json:"enable_double"`
+	EnableTriple       bool   `json:"enable_triple"`
 }
 
 type ClientView struct {
-	ID              uint32 `json:"id"`
-	MAC             string `json:"mac"`
-	Version         uint32 `json:"version"`
-	Deadzone        uint32 `json:"deadzone,omitempty"`
-	Available       bool   `json:"available"`
-	Used            bool   `json:"used"`
-	LastPing        uint32 `json:"last_ping"`
-	LastSuccessPing uint32 `json:"last_success_ping"`
+	ID              uint32          `json:"id"`
+	MAC             string          `json:"mac"`
+	Version         uint32          `json:"version"`
+	Deadzone        uint32          `json:"deadzone,omitempty"`
+	TapConfig       *TapConfigView  `json:"tap_config,omitempty"`
+	Available       bool            `json:"available"`
+	Used            bool            `json:"used"`
+	LastPing        uint32          `json:"last_ping"`
+	LastSuccessPing uint32          `json:"last_success_ping"`
+	AccelValid      bool            `json:"accel_valid"`
+	AccelX          int32           `json:"accel_x"`
+	AccelY          int32           `json:"accel_y"`
+	AccelZ          int32           `json:"accel_z"`
+	AccelAgeMs      uint32          `json:"accel_age_ms"`
+	AccelStream     bool            `json:"accel_stream"`
+	TapNotifySingle bool            `json:"tap_notify_single"`
+	TapNotifyDouble bool            `json:"tap_notify_double"`
+	TapNotifyTriple bool            `json:"tap_notify_triple"`
+	UvProtection    bool            `json:"uv_protection"`
+	LastTap         string          `json:"last_tap,omitempty"`
+	LastTapAt       int64           `json:"last_tap_at,omitempty"`
+	Lipo1           lipoReadingJSON `json:"lipo1"`
+	Lipo2           lipoReadingJSON `json:"lipo2"`
+	BatteryAgeMs    uint32          `json:"battery_age_ms,omitempty"`
 }
 
 type DashboardState struct {
-	UpdatedAt     string       `json:"updated_at"`
-	SerialPort    string       `json:"serial_port"`
-	UARTConnected bool         `json:"uart_connected"`
-	SerialOK      bool         `json:"serial_ok"`
-	SerialError   string       `json:"serial_error,omitempty"`
-	Master        MasterView   `json:"master"`
-	Clients       []ClientView `json:"clients"`
+	UpdatedAt string `json:"updated_at"`
+	SerialPort string `json:"serial_port"`
+	/** Alias of host_endpoint for older UI. */
+	HostEndpoint  string `json:"host_endpoint"`
+	HostTransport string `json:"host_transport"`
+	HostConnected bool   `json:"host_connected"`
+	UARTConnected bool   `json:"uart_connected"`
+	SerialOK      bool   `json:"serial_ok"`
+	SerialError   string `json:"serial_error,omitempty"`
+	/** Host: fast CACHE_STATUS poll (~8 ms) for accel + tap. */
+	LiveStream bool         `json:"live_stream"`
+	/** BLE live path: inter-tick stats from BleStreamTick.esp_timestamp_us. */
+	BleTick  *BleTickView `json:"ble_tick,omitempty"`
+	Master   MasterView   `json:"master"`
+	Clients  []ClientView `json:"clients"`
+}
+
+// BleTickView is median/mean inter-departure of BLE_STREAM_TICK (ESP timer).
+type BleTickView struct {
+	PeriodMs uint32  `json:"period_ms"`
+	MedianMs float64 `json:"median_ms"`
+	MeanMs   float64 `json:"mean_ms"`
+	MinMs    float64 `json:"min_ms"`
+	MaxMs    float64 `json:"max_ms"`
+	Samples  int     `json:"samples"`
+	LastEspUs uint64 `json:"last_esp_us,omitempty"`
+}
+
+const bleTickDeltaCap = 64
+
+type bleTickTracker struct {
+	lastEspUs uint64
+	haveLast  bool
+	periodMs  uint32
+	deltas    [bleTickDeltaCap]float64
+	next      int
+	count     int
+}
+
+func (t *bleTickTracker) reset() {
+	*t = bleTickTracker{}
+}
+
+func (t *bleTickTracker) add(espUs uint64, periodMs uint32) BleTickView {
+	if periodMs != 0 {
+		t.periodMs = periodMs
+	}
+	if t.haveLast && espUs > t.lastEspUs {
+		dt := float64(espUs-t.lastEspUs) / 1000.0
+		t.deltas[t.next] = dt
+		t.next = (t.next + 1) % bleTickDeltaCap
+		if t.count < bleTickDeltaCap {
+			t.count++
+		}
+	}
+	t.lastEspUs = espUs
+	t.haveLast = true
+
+	samples := make([]float64, 0, t.count)
+	if t.count < bleTickDeltaCap {
+		samples = append(samples, t.deltas[:t.count]...)
+	} else {
+		samples = append(samples, t.deltas[t.next:]...)
+		samples = append(samples, t.deltas[:t.next]...)
+	}
+	st := makeLatencyStats(samples)
+	return BleTickView{
+		PeriodMs:  t.periodMs,
+		MedianMs:  st.MedMs,
+		MeanMs:    st.MeanMs,
+		MinMs:     st.MinMs,
+		MaxMs:     st.MaxMs,
+		Samples:   st.N,
+		LastEspUs: espUs,
+	}
 }
 
 type wsHub struct {
-	mu      sync.RWMutex
-	clients map[*websocket.Conn]struct{}
-	state   DashboardState
+	mu         sync.RWMutex
+	writeMu    sync.Mutex // gorilla websocket: one writer at a time
+	clients    map[*websocket.Conn]struct{}
+	state      DashboardState
+	liveStream bool
+	bleTicks   bleTickTracker
+	lastPush   time.Time // throttle BLE tick WS pushes
 }
 
 func newWSHub() *wsHub {
@@ -56,6 +162,23 @@ func newWSHub() *wsHub {
 
 func (h *wsHub) setState(st DashboardState) {
 	h.mu.Lock()
+	prev := h.state
+	st.LiveStream = prev.LiveStream
+	if st.BleTick == nil && prev.BleTick != nil && st.LiveStream {
+		cp := *prev.BleTick
+		st.BleTick = &cp
+	}
+	st.Clients = preserveClientAccel(st.Clients, prev.Clients, st.LiveStream)
+	st.Clients = preserveClientBattery(st.Clients, prev.Clients)
+	st.Clients = preserveClientTap(st.Clients, prev.Clients)
+	if !st.Master.Lipo1.Valid && !st.Master.Lipo2.Valid {
+		if prev.Master.Lipo1.Valid || prev.Master.Lipo2.Valid {
+			st.Master.Lipo1 = prev.Master.Lipo1
+			st.Master.Lipo2 = prev.Master.Lipo2
+			st.Master.BatteryAgeMs = prev.Master.BatteryAgeMs
+		}
+	}
+	h.liveStream = st.LiveStream
 	h.state = st
 	conns := make([]*websocket.Conn, 0, len(h.clients))
 	for c := range h.clients {
@@ -68,7 +191,7 @@ func (h *wsHub) setState(st DashboardState) {
 		return
 	}
 	for _, c := range conns {
-		_ = c.WriteMessage(websocket.TextMessage, data)
+		h.writeJSON(c, data)
 	}
 }
 
@@ -79,7 +202,7 @@ func (h *wsHub) register(c *websocket.Conn) {
 	h.mu.Unlock()
 
 	if data, err := json.Marshal(snap); err == nil {
-		_ = c.WriteMessage(websocket.TextMessage, data)
+		h.writeJSON(c, data)
 	}
 }
 
@@ -89,38 +212,484 @@ func (h *wsHub) unregister(c *websocket.Conn) {
 	h.mu.Unlock()
 }
 
-func (h *wsHub) broadcastRaw(v any) {
+// dropClient removes the client and closes the socket so the browser reconnects.
+func (h *wsHub) dropClient(c *websocket.Conn) {
+	h.unregister(c)
+	_ = c.Close()
+}
+
+// writeJSON sends to one client; removes+closes it on error or panic.
+func (h *wsHub) writeJSON(c *websocket.Conn, data []byte) {
+	defer func() {
+		if recover() != nil {
+			h.dropClient(c)
+		}
+	}()
+	h.writeMu.Lock()
+	_ = c.SetWriteDeadline(time.Now().Add(2 * time.Second))
+	err := c.WriteMessage(websocket.TextMessage, data)
+	h.writeMu.Unlock()
+	if err != nil {
+		h.dropClient(c)
+	}
+}
+
+func (h *wsHub) broadcastJSON(data []byte) {
 	h.mu.RLock()
 	conns := make([]*websocket.Conn, 0, len(h.clients))
 	for c := range h.clients {
 		conns = append(conns, c)
 	}
 	h.mu.RUnlock()
+	for _, c := range conns {
+		h.writeJSON(c, data)
+	}
+}
 
-	data, err := json.Marshal(v)
+func applyAccelSamples(clients []ClientView, samples []*pb.AccelSample) []ClientView {
+	if len(samples) == 0 {
+		return clients
+	}
+	byID := make(map[uint32]*pb.AccelSample, len(samples))
+	for _, s := range samples {
+		byID[s.GetClientId()] = s
+	}
+	out := make([]ClientView, len(clients))
+	for i, c := range clients {
+		out[i] = c
+		if !c.AccelStream {
+			out[i].AccelValid = false
+			continue
+		}
+		s, ok := byID[c.ID]
+		if !ok {
+			continue
+		}
+		out[i].AccelValid = s.GetValid()
+		if s.GetValid() {
+			out[i].AccelX = s.GetX()
+			out[i].AccelY = s.GetY()
+			out[i].AccelZ = s.GetZ()
+			out[i].AccelAgeMs = s.GetAgeMs()
+		}
+	}
+	return out
+}
+
+func preserveClientAccel(newClients, oldClients []ClientView, liveStream bool) []ClientView {
+	if len(oldClients) == 0 {
+		return newClients
+	}
+	oldByID := make(map[uint32]ClientView, len(oldClients))
+	for _, c := range oldClients {
+		oldByID[c.ID] = c
+	}
+	out := make([]ClientView, len(newClients))
+	for i, c := range newClients {
+		out[i] = c
+		if !liveStream && !c.AccelStream {
+			continue
+		}
+		if liveStream && !c.AccelStream {
+			out[i].AccelValid = false
+			out[i].AccelX = 0
+			out[i].AccelY = 0
+			out[i].AccelZ = 0
+			out[i].AccelAgeMs = 0
+			continue
+		}
+		prev, ok := oldByID[c.ID]
+		if !ok || !prev.AccelValid {
+			continue
+		}
+		if !c.AccelValid {
+			out[i].AccelValid = prev.AccelValid
+			out[i].AccelX = prev.AccelX
+			out[i].AccelY = prev.AccelY
+			out[i].AccelZ = prev.AccelZ
+			out[i].AccelAgeMs = prev.AccelAgeMs
+		}
+	}
+	return out
+}
+
+func preserveClientBattery(newClients, oldClients []ClientView) []ClientView {
+	if len(oldClients) == 0 {
+		return newClients
+	}
+	oldByID := make(map[uint32]ClientView, len(oldClients))
+	for _, c := range oldClients {
+		oldByID[c.ID] = c
+	}
+	out := make([]ClientView, len(newClients))
+	for i, c := range newClients {
+		out[i] = c
+		if c.Lipo1.Valid || c.Lipo2.Valid {
+			continue
+		}
+		prev, ok := oldByID[c.ID]
+		if !ok {
+			continue
+		}
+		if prev.Lipo1.Valid || prev.Lipo2.Valid {
+			out[i].Lipo1 = prev.Lipo1
+			out[i].Lipo2 = prev.Lipo2
+			out[i].BatteryAgeMs = prev.BatteryAgeMs
+		}
+	}
+	return out
+}
+
+func anyClientAccelStream(clients []ClientView) bool {
+	for _, c := range clients {
+		if c.AccelStream {
+			return true
+		}
+	}
+	return false
+}
+
+func anyClientTapNotify(clients []ClientView) bool {
+	for _, c := range clients {
+		if c.TapNotifySingle || c.TapNotifyDouble || c.TapNotifyTriple {
+			return true
+		}
+	}
+	return false
+}
+
+func tapKindLabelPB(k pb.TapKind) string {
+	switch k {
+	case pb.TapKind_TAP_SINGLE:
+		return "single"
+	case pb.TapKind_TAP_DOUBLE:
+		return "double"
+	case pb.TapKind_TAP_TRIPLE:
+		return "triple"
+	default:
+		return ""
+	}
+}
+
+func applyTapEvents(clients []ClientView, events []*pb.TapEvent) []ClientView {
+	if len(events) == 0 {
+		return clients
+	}
+	byID := make(map[uint32]*pb.TapEvent, len(events))
+	for _, e := range events {
+		if e.GetValid() {
+			byID[e.GetClientId()] = e
+		}
+	}
+	if len(byID) == 0 {
+		return clients
+	}
+	now := time.Now().UnixMilli()
+	out := make([]ClientView, len(clients))
+	for i, c := range clients {
+		out[i] = c
+		if !clientTapNotifyAny(c) {
+			continue
+		}
+		e, ok := byID[c.ID]
+		if !ok {
+			continue
+		}
+		out[i].LastTap = tapKindLabelPB(e.GetKind())
+		out[i].LastTapAt = now
+	}
+	return out
+}
+
+const clientTapDisplayMinMs = 2000
+
+func clientTapNotifyAny(c ClientView) bool {
+	return c.TapNotifySingle || c.TapNotifyDouble || c.TapNotifyTriple
+}
+
+func preserveClientTap(newClients, oldClients []ClientView) []ClientView {
+	if len(oldClients) == 0 {
+		return newClients
+	}
+	oldByID := make(map[uint32]ClientView, len(oldClients))
+	for _, c := range oldClients {
+		oldByID[c.ID] = c
+	}
+	cutoff := time.Now().Add(-clientTapDisplayMinMs * time.Millisecond).UnixMilli()
+	out := make([]ClientView, len(newClients))
+	for i, c := range newClients {
+		out[i] = c
+		if c.LastTap != "" {
+			continue
+		}
+		prev, ok := oldByID[c.ID]
+		if !ok || prev.LastTap == "" || prev.LastTapAt < cutoff {
+			continue
+		}
+		out[i].LastTap = prev.LastTap
+		out[i].LastTapAt = prev.LastTapAt
+	}
+	return out
+}
+
+// patchClientAccelStream updates stream flag immediately (e.g. after REST) and pushes WS.
+func (h *wsHub) patchClientAccelStream(clientID uint32, enabled bool) {
+	h.mu.Lock()
+	for i := range h.state.Clients {
+		if h.state.Clients[i].ID != clientID {
+			continue
+		}
+		h.state.Clients[i].AccelStream = enabled
+		if !enabled {
+			h.state.Clients[i].AccelValid = false
+			h.state.Clients[i].AccelX = 0
+			h.state.Clients[i].AccelY = 0
+			h.state.Clients[i].AccelZ = 0
+			h.state.Clients[i].AccelAgeMs = 0
+		}
+		break
+	}
+	st := h.state
+	st.UpdatedAt = time.Now().Format(time.RFC3339)
+	conns := make([]*websocket.Conn, 0, len(h.clients))
+	for c := range h.clients {
+		conns = append(conns, c)
+	}
+	h.mu.Unlock()
+
+	data, err := json.Marshal(st)
 	if err != nil {
 		return
 	}
 	for _, c := range conns {
-		_ = c.WriteMessage(websocket.TextMessage, data)
+		h.writeJSON(c, data)
 	}
 }
 
-func pollDashboard(link *managedSerial, portName string, last *DashboardState) DashboardState {
+func (h *wsHub) anyAccelStreamEnabled() bool {
+	h.mu.RLock()
+	defer h.mu.RUnlock()
+	return anyClientAccelStream(h.state.Clients)
+}
+
+func (h *wsHub) anyTapNotifyEnabled() bool {
+	h.mu.RLock()
+	defer h.mu.RUnlock()
+	return anyClientTapNotify(h.state.Clients)
+}
+
+func (h *wsHub) liveStreamEnabled() bool {
+	h.mu.RLock()
+	defer h.mu.RUnlock()
+	return h.liveStream
+}
+
+func (h *wsHub) snapshotClients() []ClientView {
+	h.mu.RLock()
+	defer h.mu.RUnlock()
+	out := make([]ClientView, len(h.state.Clients))
+	copy(out, h.state.Clients)
+	return out
+}
+
+// patchLiveStream toggles host CACHE_STATUS polling (~8 ms).
+func (h *wsHub) patchLiveStream(enabled bool) {
+	h.mu.Lock()
+	h.liveStream = enabled
+	st := h.state
+	st.LiveStream = enabled
+	if !enabled {
+		h.bleTicks.reset()
+		st.BleTick = nil
+		for i := range st.Clients {
+			st.Clients[i].AccelValid = false
+			st.Clients[i].AccelX = 0
+			st.Clients[i].AccelY = 0
+			st.Clients[i].AccelZ = 0
+			st.Clients[i].AccelAgeMs = 0
+			st.Clients[i].LastTap = ""
+			st.Clients[i].LastTapAt = 0
+		}
+	}
+	h.state = st
+	conns := make([]*websocket.Conn, 0, len(h.clients))
+	for c := range h.clients {
+		conns = append(conns, c)
+	}
+	h.mu.Unlock()
+
+	data, err := json.Marshal(st)
+	if err != nil {
+		return
+	}
+	for _, c := range conns {
+		h.writeJSON(c, data)
+	}
+}
+
+// patchClientTapNotify updates tap notify flags immediately (e.g. after REST) and pushes WS.
+func (h *wsHub) patchClientTapNotify(clientID uint32, single, doubleTap, triple bool) {
+	h.mu.Lock()
+	for i := range h.state.Clients {
+		if h.state.Clients[i].ID != clientID {
+			continue
+		}
+		h.state.Clients[i].TapNotifySingle = single
+		h.state.Clients[i].TapNotifyDouble = doubleTap
+		h.state.Clients[i].TapNotifyTriple = triple
+		if !single && !doubleTap && !triple {
+			h.state.Clients[i].LastTap = ""
+			h.state.Clients[i].LastTapAt = 0
+		}
+		break
+	}
+	st := h.state
+	st.UpdatedAt = time.Now().Format(time.RFC3339)
+	conns := make([]*websocket.Conn, 0, len(h.clients))
+	for c := range h.clients {
+		conns = append(conns, c)
+	}
+	h.mu.Unlock()
+
+	data, err := json.Marshal(st)
+	if err != nil {
+		return
+	}
+	for _, c := range conns {
+		h.writeJSON(c, data)
+	}
+}
+
+// mergeAccel updates cached accel on clients and pushes state to dashboard WebSockets.
+func (h *wsHub) mergeAccel(samples []*pb.AccelSample) {
+	if !h.liveStreamEnabled() {
+		return
+	}
+	h.mu.Lock()
+	st := h.state
+	st.Clients = applyAccelSamples(st.Clients, samples)
+	st.UpdatedAt = time.Now().Format(time.RFC3339)
+	h.state = st
+	conns := make([]*websocket.Conn, 0, len(h.clients))
+	for c := range h.clients {
+		conns = append(conns, c)
+	}
+	h.mu.Unlock()
+
+	data, err := json.Marshal(st)
+	if err != nil {
+		return
+	}
+	for _, c := range conns {
+		h.writeJSON(c, data)
+	}
+}
+
+// mergeBleStreamTick applies accel/tap from a BLE tick and updates inter-tick stats.
+// State is updated every tick; WebSocket push is throttled (~50 Hz) so concurrent
+// writers (poller/battery) cannot flood or race the gorilla conn.
+func (h *wsHub) mergeBleStreamTick(tick *pb.BleStreamTick) {
+	if tick == nil || !h.liveStreamEnabled() {
+		return
+	}
+	cache := &pb.CacheStatusResponse{Clients: tick.GetClients()}
+	const minPushGap = 20 * time.Millisecond
+
+	h.mu.Lock()
+	view := h.bleTicks.add(tick.GetEspTimestampUs(), tick.GetPeriodMs())
+	st := h.state
+	st.Clients = applyAccelSamples(st.Clients, accelSamplesFromCacheStatus(cache))
+	st.Clients = applyTapEvents(st.Clients, tapEventsFromCacheStatus(cache))
+	st.BleTick = &view
+	st.UpdatedAt = time.Now().Format(time.RFC3339)
+	h.state = st
+	push := time.Since(h.lastPush) >= minPushGap
+	if push {
+		h.lastPush = time.Now()
+	}
+	var conns []*websocket.Conn
+	if push {
+		conns = make([]*websocket.Conn, 0, len(h.clients))
+		for c := range h.clients {
+			conns = append(conns, c)
+		}
+	}
+	h.mu.Unlock()
+
+	if !push {
+		return
+	}
+	data, err := json.Marshal(st)
+	if err != nil {
+		return
+	}
+	for _, c := range conns {
+		h.writeJSON(c, data)
+	}
+}
+
+func (h *wsHub) mergeTap(events []*pb.TapEvent) {
+	if len(events) == 0 || !h.liveStreamEnabled() {
+		return
+	}
+	h.mu.Lock()
+	st := h.state
+	st.Clients = applyTapEvents(st.Clients, events)
+	st.UpdatedAt = time.Now().Format(time.RFC3339)
+	h.state = st
+	conns := make([]*websocket.Conn, 0, len(h.clients))
+	for c := range h.clients {
+		conns = append(conns, c)
+	}
+	h.mu.Unlock()
+
+	data, err := json.Marshal(st)
+	if err != nil {
+		return
+	}
+	for _, c := range conns {
+		h.writeJSON(c, data)
+	}
+}
+
+func (h *wsHub) broadcastRaw(v any) {
+	data, err := json.Marshal(v)
+	if err != nil {
+		return
+	}
+	h.broadcastJSON(data)
+}
+
+func pollDashboard(link *managedSerial, portName string, last *DashboardState, streamCtl *accelStreamCtl, tapCtl *tapNotifyCtl) DashboardState {
+	ep := link.Endpoint()
+	if ep == "" {
+		ep = portName
+	}
+	tr := link.Transport()
 	st := DashboardState{
-		UpdatedAt:  time.Now().Format(time.RFC3339),
-		SerialPort: portName,
-		Clients:    []ClientView{},
+		UpdatedAt:     time.Now().Format(time.RFC3339),
+		SerialPort:    ep,
+		HostEndpoint:  ep,
+		HostTransport: tr,
+		Clients:       []ClientView{},
+	}
+	if !link.IsConnected() && tr == hostTransportNone {
+		st.SerialError = "not connected — use UART or BLE connect"
+		return st
 	}
 
 	ver, err := link.getVersionPoll()
 	if errors.Is(err, errUARTBusy) {
-		return pausedPollState(portName, last)
+		return pausedPollState(ep, last)
 	}
 	if err != nil {
-		return disconnectedState(portName, err)
+		return disconnectedState(ep, err)
 	}
 	st.UARTConnected = true
+	st.HostConnected = true
+	st.HostTransport = link.Transport()
+	st.HostEndpoint = link.Endpoint()
+	st.SerialPort = st.HostEndpoint
 	st.SerialOK = true
 	st.Master = MasterView{
 		Version:          ver.GetVersion(),
@@ -131,6 +700,14 @@ func pollDashboard(link *managedSerial, portName string, last *DashboardState) D
 	if dz, err := readDeadzonePoll(link, 0); err == nil {
 		st.Master.Deadzone = dz
 	}
+	if tc, err := readTapConfigPoll(link, 0); err == nil {
+		st.Master.TapConfig = tc
+	}
+	if uv, err := readBatteryUvPoll(link, 0); err == nil {
+		en := uv.GetEnabled()
+		st.Master.UvProtection = &en
+		st.Master.UvLatched = uv.GetLatched()
+	}
 
 	clients, err := link.listClientsPoll()
 	if err != nil {
@@ -139,7 +716,8 @@ func pollDashboard(link *managedSerial, portName string, last *DashboardState) D
 		}
 		st.SerialOK = false
 		st.SerialError = err.Error()
-		st.UARTConnected = link.IsConnected()
+		st.HostConnected = link.IsConnected()
+		st.UARTConnected = st.HostConnected
 		return st
 	}
 
@@ -152,21 +730,165 @@ func pollDashboard(link *managedSerial, portName string, last *DashboardState) D
 			Used:            c.GetUsed(),
 			LastPing:        c.GetLastPing(),
 			LastSuccessPing: c.GetLastSuccessPing(),
-		}
-		if dz, err := readDeadzonePoll(link, c.GetId()); err == nil {
-			cv.Deadzone = dz
+			AccelStream:     c.GetAccelStreamEnabled(),
+			TapNotifySingle: c.GetTapNotifySingle(),
+			TapNotifyDouble: c.GetTapNotifyDouble(),
+			TapNotifyTriple: c.GetTapNotifyTriple(),
+			UvProtection:    c.GetUvProtectionEnabled(),
 		}
 		st.Clients = append(st.Clients, cv)
 	}
+	applyBatteryToState(link, &st)
+	if last == nil || !last.LiveStream {
+		for i, c := range clients {
+			if dz, err := readDeadzonePoll(link, c.GetId()); err == nil {
+				st.Clients[i].Deadzone = dz
+			}
+			if tc, err := readTapConfigPoll(link, c.GetId()); err == nil {
+				st.Clients[i].TapConfig = tc
+			}
+		}
+	}
+	if last != nil {
+		st.LiveStream = last.LiveStream
+	}
+	if streamCtl != nil {
+		streamCtl.SyncFromClients(st.Clients)
+	}
+	if tapCtl != nil {
+		tapCtl.SyncFromClients(st.Clients)
+	}
 	return st
 }
 
+func applyBatteryToState(link *managedSerial, st *DashboardState) {
+	bat, err := link.BatteryStatusPoll(&pb.BatteryStatusRequest{AllClients: true})
+	if errors.Is(err, errUARTBusy) {
+		return
+	}
+	if err != nil {
+		log.Printf("battery poll: %v", err)
+		return
+	}
+	applyBatterySamplesToState(st, batterySamplesFromPB(bat.GetSamples()))
+}
+
+func (h *wsHub) mergeBattery(samples []batterySampleJSON) {
+	if len(samples) == 0 {
+		return
+	}
+	h.mu.Lock()
+	st := h.state
+	applyBatterySamplesToState(&st, samples)
+	st.UpdatedAt = time.Now().Format(time.RFC3339)
+	h.state = st
+	conns := make([]*websocket.Conn, 0, len(h.clients))
+	for c := range h.clients {
+		conns = append(conns, c)
+	}
+	h.mu.Unlock()
+
+	data, err := json.Marshal(st)
+	if err != nil {
+		return
+	}
+	for _, c := range conns {
+		h.writeJSON(c, data)
+	}
+}
+
+func runBatteryPoller(link *managedSerial, hub *wsHub, interval time.Duration, stop <-chan struct{}) {
+	ticker := time.NewTicker(interval)
+	defer ticker.Stop()
+
+	for {
+		select {
+		case <-stop:
+			return
+		case <-ticker.C:
+			if !link.IsConnected() || link.PollPaused() {
+				continue
+			}
+			bat, err := link.BatteryStatusPoll(&pb.BatteryStatusRequest{AllClients: true})
+			if errors.Is(err, errUARTBusy) || err != nil {
+				continue
+			}
+			hub.mergeBattery(batterySamplesFromPB(bat.GetSamples()))
+		}
+	}
+}
+
+func runCacheStatusDashboardPoller(link *managedSerial, hub *wsHub, interval time.Duration, stop <-chan struct{}) {
+	ticker := time.NewTicker(interval)
+	defer ticker.Stop()
+
+	for {
+		select {
+		case <-stop:
+			return
+		case <-ticker.C:
+			if !hub.liveStreamEnabled() || link.PollPaused() {
+				continue
+			}
+			// BLE live path prefers BLE_STREAM_TICK pushes.
+			if link.Transport() == hostTransportBLE {
+				continue
+			}
+			cache, err := link.readCacheStatusPoll()
+			if err != nil {
+				continue
+			}
+			hub.mergeAccel(accelSamplesFromCacheStatus(cache))
+			hub.mergeTap(tapEventsFromCacheStatus(cache))
+		}
+	}
+}
+
+// runBLEStreamDashboardPoller feeds live accel/tap from BLE_STREAM_TICK when live_stream is on.
+func runBLEStreamDashboardPoller(link *managedSerial, hub *wsHub, streamCtl *accelStreamCtl, stop <-chan struct{}) {
+	_ = streamCtl
+	for {
+		select {
+		case <-stop:
+			return
+		default:
+		}
+		if link.Transport() != hostTransportBLE || !hub.liveStreamEnabled() || link.PollPaused() {
+			select {
+			case <-stop:
+				return
+			case <-time.After(50 * time.Millisecond):
+			}
+			continue
+		}
+		payload, err := link.NextStreamTick(200 * time.Millisecond)
+		if err != nil {
+			continue
+		}
+		tick, err := parseBleStreamTickPayload(payload)
+		if err != nil {
+			continue
+		}
+		hub.mergeBleStreamTick(tick)
+	}
+}
+
+func (h *wsHub) clientCount() int {
+	h.mu.RLock()
+	n := len(h.clients)
+	h.mu.RUnlock()
+	return n
+}
+
 func pausedPollState(portName string, last *DashboardState) DashboardState {
-	if last != nil && last.UARTConnected {
+	if last != nil && (last.HostConnected || last.UARTConnected) {
 		st := *last
 		st.UpdatedAt = time.Now().Format(time.RFC3339)
 		st.SerialPort = portName
+		st.HostEndpoint = portName
 		st.SerialOK = true
+		st.HostConnected = true
+		st.UARTConnected = true
 		st.SerialError = "Live-Polling pausiert (OTA läuft)"
 		return st
 	}
@@ -201,6 +923,48 @@ func readDeadzonePoll(link *managedSerial, clientID uint32) (uint32, error) {
 	return r.GetDeadzone(), nil
 }
 
+func tapConfigViewFromPB(r *pb.TapConfigResponse) *TapConfigView {
+	return &TapConfigView{
+		TapSensThres:       r.GetTapSensThres(),
+		MaxGestDur:         r.GetMaxGestDur(),
+		TapShockDur:        r.GetTapShockDur(),
+		QuiteTimeAfterGest: r.GetQuiteTimeAfterGest(),
+		WaitForTimeout:     r.GetWaitForTimeout(),
+		AxisSel:            r.GetAxisSel(),
+		EnableSingle:       r.GetEnableSingle(),
+		EnableDouble:       r.GetEnableDouble(),
+		EnableTriple:       r.GetEnableTriple(),
+	}
+}
+
+func readBatteryUvPoll(link *managedSerial, clientID uint32) (*pb.BatteryUvResponse, error) {
+	r, err := link.BatteryUvPoll(&pb.BatteryUvRequest{
+		Write:    false,
+		ClientId: clientID,
+	})
+	if err != nil {
+		return nil, err
+	}
+	if !r.GetSuccess() {
+		return nil, fmt.Errorf("battery uv read failed for client %d", clientID)
+	}
+	return r, nil
+}
+
+func readTapConfigPoll(link *managedSerial, clientID uint32) (*TapConfigView, error) {
+	r, err := link.TapConfigPoll(&pb.TapConfigRequest{
+		Write:    false,
+		ClientId: clientID,
+	})
+	if err != nil {
+		return nil, err
+	}
+	if !r.GetSuccess() {
+		return nil, fmt.Errorf("tap config read failed for client %d", clientID)
+	}
+	return tapConfigViewFromPB(r), nil
+}
+
 func formatMAC(mac []byte) string {
 	if len(mac) == 0 {
 		return ""
@@ -208,22 +972,25 @@ func formatMAC(mac []byte) string {
 	return hex.EncodeToString(mac)
 }
 
-func runPoller(link *managedSerial, portName string, hub *wsHub, interval time.Duration, stop <-chan struct{}) {
+func runPoller(link *managedSerial, portName string, hub *wsHub, streamCtl *accelStreamCtl, tapCtl *tapNotifyCtl, interval time.Duration, stop <-chan struct{}) {
+	// streamCtl / tapCtl kept for external API; dashboard uses hub.state flags.
 	ticker := time.NewTicker(interval)
 	defer ticker.Stop()
 
-	uartUp := false
+	hostUp := false
 	var lastGood DashboardState
 	publish := func() {
-		st := pollDashboard(link, portName, &lastGood)
-		if st.UARTConnected && st.SerialOK {
-			lastGood = st
-		}
-		if st.UARTConnected && !uartUp {
-			log.Printf("UART %s connected", portName)
-		}
-		uartUp = st.UARTConnected
+		st := pollDashboard(link, portName, &lastGood, streamCtl, tapCtl)
 		hub.setState(st)
+		if st.HostConnected && st.SerialOK {
+			hub.mu.RLock()
+			lastGood = hub.state
+			hub.mu.RUnlock()
+		}
+		if st.HostConnected && !hostUp {
+			log.Printf("host %s connected (%s)", st.HostEndpoint, st.HostTransport)
+		}
+		hostUp = st.HostConnected
 	}
 
 	publish()

goTool/docs/API_REST.md

@@ -0,0 +1,517 @@
+# REST API
+
+`go run . serve` (optional `-port` / `-ble`) starts two HTTP servers on the same `managedHost` (UART or BLE):
+
+| Base URL | Flag | Used by |
+|----------|------|---------|
+| `http://localhost:8080` | `-addr` (default `:8080`) | Web dashboard + automation on the UI routes |
+| `http://localhost:8081` | `-api-addr` (default `:8081`, `""` disables) | External programs; subset of routes + service info |
+
+WebSocket streaming (accel/tap push): [`API_WEBSOCKET.md`](API_WEBSOCKET.md).
+
+All JSON responses use `Content-Type: application/json`. On UART errors many routes return **503** with `"error"` in the body.
+
+---
+
+## External API (`:8081`)
+
+### Service info
+
+```http
+GET /
+GET /api/v1/
+```
+
+```json
+{
+  "name": "powerpod-external-api",
+  "version": "1",
+  "serial_port": "/dev/ttyUSB0",
+  "transport": "uart",
+  "endpoint": "/dev/ttyUSB0",
+  "connected": true,
+  "websocket": "/ws",
+  "default_interval_ms": 16,
+  "min_interval_ms": 1,
+  "max_interval_ms": 10000,
+  "tap_display_min_ms": 2000,
+  "description": "..."
+}
+```
+
+### Battery
+
+```http
+GET /api/battery?all_clients=true
+GET /api/battery?client_id=16
+POST /api/battery
+Content-Type: application/json
+```
+
+POST body:
+
+```json
+{"all_clients": true}
+{"client_id": 0}
+{"client_id": 16}
+```
+
+Response:
+
+```json
+{
+  "success": true,
+  "samples": [
+    {
+      "client_id": 16,
+      "lipo1": {"valid": true, "voltage_mv": 3850, "percent": 71},
+      "lipo2": {"valid": false},
+      "age_ms": 1200
+    }
+  ]
+}
+```
+
+Slaves push battery to the master every **30 s**; these routes read the master cache.
+
+WebSocket equivalent: `get_battery` on `ws://localhost:8081/ws` (reply type `battery_status`).
+
+### LED ring
+
+```http
+POST /api/led-ring
+Content-Type: application/json
+```
+
+Body:
+
+```json
+{"mode":"color","client_id":16,"r":255,"g":0,"b":0,"intensity":128}
+{"mode":"digit","client_id":0,"digit":3,"r":0,"g":255,"b":0}
+{"mode":"find-me","all_clients":true,"slaves_only":true}
+```
+
+| `mode` | Notes |
+|--------|--------|
+| `clear` | Turn off |
+| `color` | Full ring RGB + `intensity` |
+| `progress` | `progress` 0–100 |
+| `digit` | `digit` 0–10 |
+| `blink` | `blink_ms`, `blink_count` |
+| `find-me` | Locate pod |
+| `battery-low` | First 4 LEDs red at ~10 % for 5 s (UV indicator test) |
+
+Use `client_id` (`0` = master) or `all_clients` (+ optional `slaves_only`) for broadcast.
+
+Response: `success`, `slaves_updated`, optional `error`.
+
+WebSocket: `set_led_ring` with the same fields plus `"type":"set_led_ring"` → `led_ring_status`.
+
+---
+
+## Dashboard API (`:8080`)
+
+Used by the web UI; safe for scripts that drive the same features.
+
+### Host link (UART / BLE)
+
+```http
+GET /api/host
+→ {"transport":"none|uart|ble","endpoint":"…","connected":false,"ble_name":""}
+
+GET /api/serial/ports
+→ {"ports":["/dev/ttyUSB0",…]}
+
+POST /api/host/connect
+Content-Type: application/json
+{"transport":"uart","port":"/dev/ttyUSB0"}
+{"transport":"ble","address":"AA:BB:…","name":"Powerpod"}
+
+POST /api/host/disconnect
+
+POST /api/ble/scan
+{"timeout_s":5,"name_filter":"Powerpod"}
+→ {"devices":[{"address":"…","name":"Powerpod","rssi":-55}]}
+```
+
+`name_filter` is optional substring match (case-insensitive); omit to list all LE advertisements. Active BLE is disconnected before scan (BlueZ adapter).
+
+Dashboard WebSocket state includes `host_connected`, `host_transport`, `host_endpoint` (aliases `uart_connected` / `serial_port` kept).
+
+**OTA** (`POST /api/ota`) returns **400** unless a host (UART or BLE) is connected.
+
+### BLE latency tests (BLE host only)
+
+```http
+POST /api/ble-rtt
+{"count":50,"warmup":5,"settle_s":0}
+→ {"success":true,"count":50,"warmup":5,"stats":{"n":50,"min_ms":…,"median_ms":…,"mean_ms":…,"max_ms":…}}
+
+POST /api/ble-stream
+{"count":50,"period_ms":8,"tol_ms":2,"timeout_s":15,"client_id":0}
+→ {"success":true,"received":50,"requested":50,"window_ok":true,"dt_esp_ms":{…},"dr_pc_ms":{…},…}
+```
+
+Pauses dashboard/API polling while running. Requires active BLE host (`DIP8=1`).
+
+### Live stream (host `CACHE_STATUS` poll ~8 ms; BLE uses `BLE_STREAM_TICK`)
+
+```http
+GET /api/live-stream
+PUT /api/live-stream
+Content-Type: application/json
+{"enable": true}
+```
+
+```json
+{"enabled": true, "success": true}
+```
+
+Enables fast UART polling for dashboard accel/tap display. Per-slave accel still requires accel-stream (below).
+
+### Accel stream (firmware ESP-NOW, per slave)
+
+```http
+GET /api/clients/16/accel-stream
+PUT /api/clients/16/accel-stream
+Content-Type: application/json
+{"enable": true}
+```
+
+```json
+{"enabled": true, "client_id": 16, "success": true}
+```
+
+All slaves:
+
+```http
+POST /api/accel-stream
+Content-Type: application/json
+{"write": true, "enable": true, "all_clients": true}
+```
+
+Polling on the host runs only while at least one slave has streaming enabled (here or via external WebSocket / dashboard).
+
+### Tap notify (firmware; does not start host tap polling)
+
+```http
+GET /api/clients/16/tap-notify
+PUT /api/clients/16/tap-notify
+Content-Type: application/json
+{"single": true, "double_tap": false, "triple": false}
+```
+
+```json
+{
+  "client_id": 16,
+  "success": true,
+  "slaves_updated": 1,
+  "single": true,
+  "double_tap": false,
+  "triple": false
+}
+```
+
+All slaves:
+
+```http
+POST /api/tap-notify
+Content-Type: application/json
+{"single": true, "double_tap": false, "triple": false, "all_clients": true}
+```
+
+Host tap display / external `set_tap_stream` is separate.
+
+### Tap snapshot (one-shot, via `CACHE_STATUS`)
+
+```http
+GET /api/tap-snapshot?client_id=16
+```
+
+Reads the combined cache (`CACHE_STATUS`); optional `client_id` filters pending tap events. Pending taps are consumed on read.
+
+```json
+{
+  "events": [
+    {"client_id": 16, "kind": "single", "age_ms": 4}
+  ]
+}
+```
+
+### Deadzone
+
+```http
+GET /api/deadzone?client_id=0
+POST /api/deadzone
+Content-Type: application/json
+{"write": true, "deadzone": 128, "client_id": 0}
+```
+
+With `all_clients` + `slaves_only`: push to ESP-NOW slaves only (master BMA456 unchanged).
+
+```json
+{"deadzone": 128, "client_id": 0, "success": true, "slaves_updated": 2}
+```
+
+### Tap config (BMA456 multitap)
+
+```http
+GET /api/tap-config?client_id=0
+POST /api/tap-config
+Content-Type: application/json
+{
+  "write": true,
+  "client_id": 0,
+  "tap_sens_thres": 5,
+  "max_gest_dur": 100,
+  "tap_shock_dur": 6,
+  "quite_time_after_gest": 60,
+  "wait_for_timeout": 0,
+  "axis_sel": 2,
+  "enable_single": true,
+  "enable_double": true,
+  "enable_triple": true
+}
+```
+
+Same `client_id` / `all_clients` / `slaves_only` semantics as deadzone. Values are applied to the sensor and persisted in NVS on each target node.
+
+```json
+{
+  "client_id": 0,
+  "success": true,
+  "slaves_updated": 0,
+  "tap_sens_thres": 5,
+  "max_gest_dur": 100,
+  "tap_shock_dur": 6,
+  "quite_time_after_gest": 60,
+  "wait_for_timeout": 0,
+  "axis_sel": 2,
+  "enable_single": true,
+  "enable_double": true,
+  "enable_triple": true
+}
+```
+
+### Unicast test
+
+```http
+POST /api/unicast-test
+Content-Type: application/json
+{"client_id": 16, "seq": 42}
+```
+
+### Echo ping (ESP-NOW round-trip latency)
+
+```http
+POST /api/echo-ping
+Content-Type: application/json
+{"client_id": 16}
+```
+
+`client_id` must be a registered slave id (`> 0`). The host sends a microsecond timestamp; the master forwards it over ESP-NOW and the slave echoes it back unchanged.
+
+**Flow:** Host → UART → `cmd_espnow_echo_ping` → `ESPNOW_ECHO_PING` (with `master_time_us` from `esp_timer_get_time()`) → Slave → `ESPNOW_ECHO_PONG` → Master `recv_cb` → UART response.
+
+**Response fields:**
+
+| Field | Unit | Meaning |
+|-------|------|---------|
+| `success` | — | `true` if pong received within 500 ms |
+| `client_id` | — | Echo of request |
+| `timestamp_us` | µs (Unix) | Echoed host timestamp; must match request on success |
+| `rtt_ms` | ms | **Host-side** round-trip: goTool send → UART response (full chain incl. USB serial) |
+| `esp_rtt_us` | µs | **Master-side** ESP-NOW only: `esp_timer_get_time()` delta from ping send to pong recv |
+
+`esp_rtt_us` is the raw firmware value (microseconds, not converted). The web dashboard displays it converted to milliseconds for readability (`esp_rtt_us / 1000`, 3 decimal places). The success banner stays visible for at least 5 seconds.
+
+```json
+{
+  "success": true,
+  "client_id": 16,
+  "timestamp_us": 1717654321123456,
+  "rtt_ms": 49.729,
+  "esp_rtt_us": 18234
+}
+```
+
+On failure (`success: false`), `esp_rtt_us` is omitted; `rtt_ms` still reflects the host round-trip. HTTP 503 if UART exchange fails (e.g. timeout, client not in registry).
+
+**CLI:**
+
+```bash
+go run . -port /dev/ttyUSB0 echo-ping -client 16
+```
+
+Example output:
+
+```
+echo ping: success=true client_id=16 rtt_ms=49.729 esp_rtt_us=18234
+```
+
+### Find me
+
+```http
+POST /api/find-me
+Content-Type: application/json
+{"client_id": 16}
+```
+
+`client_id` `0` = master LED ring.
+
+### Restart
+
+```http
+POST /api/restart
+Content-Type: application/json
+{"client_id": 16}
+```
+
+### Log level (master ESP-IDF console)
+
+Runtime get/set of the **global** log filter on the master (`esp_log_level_set("*", …)`). Output goes to **UART0** (USB debug, 115200), not the host protocol UART (GPIO 2/3, 921600).
+
+```http
+GET /api/log-level
+POST /api/log-level
+Content-Type: application/json
+{"write": true, "level": 3}
+```
+
+| `level` | Meaning |
+|---------|---------|
+| 0 | None (no log output) |
+| 1 | Error |
+| 2 | Warn |
+| 3 | Info |
+| 4 | Debug |
+| 5 | Verbose |
+
+```json
+{"success": true, "level": 3}
+```
+
+**CLI:**
+
+```bash
+go run . -port /dev/ttyUSB0 log-level
+go run . -port /dev/ttyUSB0 log-level -set -level 3
+```
+
+Dashboard: Master card → dropdown **ESP Log-Level** with **Lesen** / **Setzen**.
+
+### Battery UV protection
+
+Runtime enable for software LiPo under-voltage protection (NVS `uv_en` per pod). Disable also clears `uv_latch`. `all_clients` applies to master + every registered slave; `slaves_only` with `all_clients` skips the master.
+
+```http
+GET /api/battery-uv?client_id=0
+POST /api/battery-uv
+Content-Type: application/json
+{"write": true, "enabled": false, "client_id": 0}
+{"write": true, "enabled": false, "all_clients": true}
+{"write": true, "enabled": false, "all_clients": true, "slaves_only": true}
+```
+
+```json
+{"success": true, "client_id": 0, "enabled": false, "latched": false, "slaves_updated": 0}
+```
+
+```bash
+go run . -port /dev/ttyUSB0 battery-uv
+go run . -port /dev/ttyUSB0 battery-uv -set -enable=false -client 0
+go run . -port /dev/ttyUSB0 battery-uv -set -enable=false -all
+```
+
+Dashboard: Master **UV-Schutz** checkbox + **Alle an/aus**; per-slave **UV** column.
+
+### Input send mode (slave accel/tap ESP-NOW TX path)
+
+Debug A/B for how slaves transmit `ACCEL_SAMPLE` / `TAP_EVENT`. Default on slaves is `best_effort` (0). Master remembers the last mode for GET; write pushes via ESP-NOW.
+
+```http
+GET /api/input-send-mode
+PUT /api/input-send-mode
+Content-Type: application/json
+{"mode": 2, "all_clients": true}
+```
+
+| `mode` | Path |
+|--------|------|
+| 0 | `best_effort` (fire-and-forget, quiet) |
+| 1 | `fast` (fire-and-forget, logs failures) |
+| 2 | `wait` (send-done + retries) |
+| 3 | `reliable` (OTA-style retries; can stall high-rate accel) |
+
+```json
+{"success": true, "mode": 2, "mode_name": "wait", "slaves_updated": 2}
+```
+
+**CLI:**
+
+```bash
+go run . -port /dev/ttyUSB0 input-send-mode
+go run . -port /dev/ttyUSB0 input-send-mode -set -mode 2 -all
+```
+
+Dashboard: ESP-NOW Slaves toolbar → **Input-Send** dropdown + **Setzen** / **Lesen**.
+
+### OTA (master host upload, UART or BLE)
+
+```http
+POST /api/ota
+Content-Type: multipart/form-data
+```
+
+Form field **`firmware`**: binary image, max **2 MiB**. Requires connected host (`transport` uart or ble). BLE needs ATT MTU ≥ 219 for 200 B chunks.
+
+```json
+{"success": true, "bytes_written": 123456, "target_slot": 1}
+```
+
+Firmware distributes to slaves over ESP-NOW after `OTA_END`. Progress also appears on dashboard WebSocket as `ota_progress` messages.
+
+CLI equivalent:
+
+```bash
+go run . -port /dev/ttyUSB0 ota build/powerpod.bin
+go run . -ble ota build/powerpod.bin
+```
+
+### LED ring and battery
+
+Same as external API:
+
+- `POST /api/led-ring`
+- `GET` / `POST` `/api/battery`
+
+---
+
+## Dashboard vs external
+
+| Feature | Dashboard `:8080` | External `:8081` |
+|---------|-------------------|------------------|
+| Client list | Via dashboard WebSocket state / CLI `clients` | WebSocket `list_clients` |
+| Accel/tap **push stream** | WebSocket state when live-stream on | WebSocket `set_stream` / `set_tap_stream` |
+| Accel stream enable | REST `PUT .../accel-stream` | WebSocket `set_accel_stream` |
+| Tap notify | REST `PUT .../tap-notify` | WebSocket `set_tap_notify` |
+| LED / battery | REST | REST + WebSocket on `:8081` |
+
+---
+
+## UI mapping
+
+| UI action | REST / CLI |
+|-----------|------------|
+| Nur Master deadzone | `POST /api/deadzone` `client_id: 0` or CLI `deadzone -set -client 0` |
+| Einzelner Slave | `client_id: <id>` |
+| Alle Slaves deadzone | `all_clients` + `slaves_only` on POST |
+| Master tap config | `GET` / `POST /api/tap-config` `client_id: 0` or CLI `tap-config` |
+| Tap-Cfg alle Slaves | `POST /api/tap-config` with `all_clients` + `slaves_only` |
+| Unicast test | `POST /api/unicast-test` |
+| Echo ping | `POST /api/echo-ping` (per-slave latency; UI shows Host ms + ESP ms) |
+| Master log level | `GET` / `POST /api/log-level` or CLI `log-level` |
+| UV protection | `GET` / `POST /api/battery-uv` or CLI `battery-uv` |
+| Input-Send mode | `GET` / `PUT /api/input-send-mode` or CLI `input-send-mode` |
+| Tap notify S/D/T | `PUT /api/clients/{id}/tap-notify` |
+| Tap receive (UI) | Live stream + tap notify; see WebSocket doc for external API |

goTool/docs/API_WEBSOCKET.md

@@ -0,0 +1,277 @@
+# WebSocket API
+
+External API: `ws://localhost:8081/ws` (default `-api-addr`, disable with empty string).
+
+Start with `go run . serve` (optional `-port` / `-ble` to pre-connect). Host can be opened later via `host_connect` / dashboard REST.
+
+---
+
+## Connection flow
+
+1. Connect → server sends `hello` (host status, push off; defaults and command list).
+2. Optionally `ble_scan` / `list_serial_ports` then `host_connect` if not already linked.
+3. Send JSON commands → one reply per message (`*_status`, `client_list`, `ble_scan_result`, …).
+4. After `set_stream` with `enable: true`, server may push `input` messages without a prior command.
+
+Commands and pushes share one socket — always branch on `type`.
+
+On disconnect, `set_stream` state for that socket is dropped. Firmware settings (`set_input_stream`, `set_tap_notify`) stay on the master until changed.
+
+---
+
+## Two layers (firmware vs host)
+
+
+| Layer              | Commands                             | Effect                                                             |
+| ------------------ | ------------------------------------ | ------------------------------------------------------------------ |
+| Firmware (ESP-NOW) | `set_input_stream`, `set_tap_notify` | Per `client_id`: slave sends accel and/or tap events to the master |
+| This connection    | `set_stream`                         | Whether you receive push JSON on this socket                       |
+
+
+Host polling / BLE ticks run only when at least one connection has `receive_input: true` **and** at least one slave streams input or has tap notify enabled. `set_tap_notify` alone does not enable push — you still need `set_stream`.
+
+On **BLE**, live `input` prefers firmware `BLE_STREAM_TICK` pushes; otherwise falls back to `CACHE_STATUS` like UART.
+
+### Push timing (per connection)
+
+
+| Field         | Where                                  | Meaning                                                      |
+| ------------- | -------------------------------------- | ------------------------------------------------------------ |
+| `interval_ms` | `hello`, `set_stream`, `stream_status` | Minimum ms between `input` pushes on this socket (1 … 10000) |
+| `pre_fetch`   | `set_stream`, `stream_status`          | Ms before each push when the host starts the UART cache read |
+
+
+Global host poll interval = minimum `interval_ms` among all connections with push enabled.
+
+Typical sequence:
+
+1. `list_clients` → slave IDs
+2. Per slave: `set_input_stream` and/or `set_tap_notify`
+3. `set_stream` with `"enable": true`
+4. Read `input` messages; filter by `client_id` in your app (no per-slave filter on the wire)
+
+---
+
+## Push: `input`
+
+Combines latest accel cache and visible tap state for every slave slot on the master.
+
+**Success:**
+
+```json
+{
+  "type": "input",
+  "t": 1716900123456789012,
+  "success": true,
+  "clients": [
+    {
+      "client_id": 16,
+      "valid": true,
+      "x": 12,
+      "y": -34,
+      "z": 16384,
+      "accel_age_ms": 8,
+      "tap_kind": "single",
+      "tap_age_ms": 3
+    },
+    {
+      "client_id": 42,
+      "valid": false
+    }
+  ]
+}
+```
+
+
+| Field          | Meaning                                                              |
+| -------------- | -------------------------------------------------------------------- |
+| `t`            | Unix timestamp in nanoseconds when the host read the cache           |
+| `success`      | `true` if `CACHE_STATUS` succeeded                                   |
+| `clients[]`    | One entry per slave slot (includes invalid/stale entries)            |
+| `client_id`    | Same id as in `list_clients`                                         |
+| `valid`        | `false` if no accel sample yet or stale; omit `x`/`y`/`z` when false |
+| `x`, `y`, `z`  | Raw accelerometer LSB (BMA456, ±2 g)                                 |
+| `accel_age_ms` | Ms since the master received this accel sample                       |
+| `tap_kind`     | `"single"`, `"double"`, or `"triple"`; omit when no recent tap       |
+| `tap_age_ms`   | Ms since tap in master cache; omit with `tap_kind`                   |
+
+
+Tap events stay visible for `tap_display_min_ms` (2000, in `hello`) after the API first saw them.
+
+**Failure** (no `clients` array):
+
+```json
+{"type":"input","t":1716900123456789012,"success":false,"error":"uart busy"}
+```
+
+---
+
+## Commands
+
+One JSON object per message; field `type` selects the command.
+
+**Errors:** Replies use the matching response `type`. On failure: `success: false` (or omitted) and `"error": "…"`. Malformed JSON or unknown `type` → `stream_status` with `error`.
+
+### `hello` (server → client)
+
+```json
+{
+  "type": "hello",
+  "serial_port": "/dev/ttyUSB0",
+  "transport": "uart",
+  "endpoint": "/dev/ttyUSB0",
+  "connected": true,
+  "interval_ms": 16,
+  "pre_fetch_ms": 2,
+  "tap_display_min_ms": 2000,
+  "commands": [
+    "get_host", "list_serial_ports", "ble_scan", "host_connect", "host_disconnect",
+    "list_clients",
+    "set_stream", "get_stream",
+    "set_input_stream", "get_input_stream",
+    "set_tap_notify", "get_tap_notify",
+    "set_led_ring", "get_battery"
+  ]
+}
+```
+
+### Host link
+
+| Client `type` | Reply `type` | Notes |
+|---------------|--------------|--------|
+| `get_host` | `host_status` | `transport`, `endpoint`, `connected` |
+| `list_serial_ports` | `serial_ports` | `{ports:[…]}` |
+| `ble_scan` | `ble_scan_result` | optional `timeout_s`, `name_filter`; disconnects active BLE first |
+| `host_connect` | `host_status` | `transport:"uart","port"` or `transport:"ble","address","name?"` |
+| `host_disconnect` | `host_status` | |
+
+```json
+{"type":"host_connect","transport":"ble","address":"AA:BB:CC:DD:EE:FF","name":"Powerpod"}
+{"type":"host_status","transport":"ble","endpoint":"AA:BB:…","connected":true,"success":true}
+```
+
+If the host is not connected, other commands that need the master return their usual error in the status reply.
+
+### `list_clients`
+
+Request: `{"type":"list_clients"}`
+
+Response `client_list`:
+
+```json
+{
+  "type": "client_list",
+  "success": true,
+  "clients": [
+    {
+      "id": 16,
+      "mac": "aa:bb:cc:dd:ee:10",
+      "available": true,
+      "input_stream": false,
+      "tap_notify_single": false,
+      "tap_notify_double": false,
+      "tap_notify_triple": false
+    }
+  ]
+}
+```
+
+Also per client: `version`, `used`, `last_ping`, `last_success_ping`.
+
+### `set_stream` / `get_stream`
+
+```json
+{"type":"set_stream","enable":true,"interval_ms":32,"pre_fetch":2}
+{"type":"get_stream"}
+```
+
+Response `stream_status`:
+
+```json
+{"type":"stream_status","receive_input":true,"interval_ms":32,"pre_fetch":2,"success":true}
+```
+
+### `set_input_stream` / `get_input_stream` (firmware)
+
+`client_id` required (> 0).
+
+```json
+{"type":"set_input_stream","client_id":16,"enable":true}
+{"type":"get_input_stream","client_id":16}
+```
+
+Response `input_stream_status`:
+
+```json
+{"type":"input_stream_status","client_id":16,"enabled":true,"success":true}
+```
+
+### `set_tap_notify` / `get_tap_notify` (firmware)
+
+Set requires `single`, `double_tap`, `triple` per client, or `"all_clients": true` for broadcast.
+
+```json
+{"type":"set_tap_notify","client_id":16,"single":true,"double_tap":false,"triple":false}
+{"type":"get_tap_notify","client_id":16}
+```
+
+Response `tap_notify_status`:
+
+```json
+{"type":"tap_notify_status","client_id":16,"success":true,"single":true,"double_tap":false,"triple":false}
+```
+
+### `set_led_ring`
+
+```json
+{"type":"set_led_ring","mode":"color","client_id":16,"r":255,"g":0,"b":0,"intensity":128}
+{"type":"set_led_ring","mode":"digit","client_id":0,"digit":3,"r":0,"g":255,"b":0}
+{"type":"set_led_ring","mode":"find-me","all_clients":true,"slaves_only":true}
+```
+
+
+| Request `mode` | Notes                       |
+| -------------- | --------------------------- |
+| `clear`        | Turn off                    |
+| `color`        | Full ring RGB + `intensity` |
+| `progress`     | `progress` 0–100            |
+| `digit`        | `digit` 0–10                |
+| `blink`        | `blink_ms`, `blink_count`   |
+| `find-me`      | Locate pod                  |
+| `battery-low`  | UV indicator (4 LEDs, 5 s)  |
+
+
+Target: `client_id` (`0` = master) or `all_clients` (+ optional `slaves_only`).
+
+Response `led_ring_status` — `mode` is numeric: 0=clear, 1=progress, 2=digit, 3=blink, 4=find-me, 5=color, 6=battery-low.
+
+```json
+{"type":"led_ring_status","success":true,"mode":5,"client_id":16,"slaves_updated":1}
+```
+
+### `get_battery`
+
+Slaves push battery every 30 s; this reads the master cache. Default: all clients.
+
+```json
+{"type":"get_battery","all_clients":true}
+{"type":"get_battery","client_id":16}
+```
+
+Response `battery_status`:
+
+```json
+{
+  "type": "battery_status",
+  "success": true,
+  "samples": [
+    {
+      "client_id": 16,
+      "lipo1": {"valid": true, "voltage_mv": 3850, "percent": 71},
+      "lipo2": {"valid": false},
+      "age_ms": 1200
+    }
+  ]
+}
+```
+

goTool/go.mod

@@ -6,9 +6,19 @@ require (
 	github.com/gorilla/websocket v1.5.3
 	go.bug.st/serial v1.6.4
 	google.golang.org/protobuf v1.36.11
+	tinygo.org/x/bluetooth v0.13.0
 )
 
 require (
 	github.com/creack/goselect v0.1.2 // indirect
+	github.com/go-ole/go-ole v1.2.6 // indirect
+	github.com/godbus/dbus/v5 v5.1.0 // indirect
+	github.com/saltosystems/winrt-go v0.0.0-20240509164145-4f7860a3bd2b // indirect
+	github.com/sirupsen/logrus v1.9.3 // indirect
+	github.com/soypat/cyw43439 v0.0.0-20250505012923-830110c8f4af // indirect
+	github.com/soypat/seqs v0.0.0-20250124201400-0d65bc7c1710 // indirect
+	github.com/tinygo-org/cbgo v0.0.4 // indirect
+	github.com/tinygo-org/pio v0.2.0 // indirect
+	golang.org/x/exp v0.0.0-20241204233417-43b7b7cde48d // indirect
 	golang.org/x/sys v0.19.0 // indirect
 )

goTool/go.sum

@@ -1,20 +1,51 @@
 github.com/creack/goselect v0.1.2 h1:2DNy14+JPjRBgPzAd1thbQp4BSIihxcBf0IXhQXDRa0=
 github.com/creack/goselect v0.1.2/go.mod h1:a/NhLweNvqIYMuxcMOuWY516Cimucms3DglDzQP3hKY=
+github.com/davecgh/go-spew v1.1.0/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
 github.com/davecgh/go-spew v1.1.1 h1:vj9j/u1bqnvCEfJOwUhtlOARqs3+rkHYY13jYWTU97c=
 github.com/davecgh/go-spew v1.1.1/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
+github.com/go-ole/go-ole v1.2.6 h1:/Fpf6oFPoeFik9ty7siob0G6Ke8QvQEuVcuChpwXzpY=
+github.com/go-ole/go-ole v1.2.6/go.mod h1:pprOEPIfldk/42T2oK7lQ4v4JSDwmV0As9GaiUsvbm0=
+github.com/godbus/dbus/v5 v5.1.0 h1:4KLkAxT3aOY8Li4FRJe/KvhoNFFxo0m6fNuFUO8QJUk=
+github.com/godbus/dbus/v5 v5.1.0/go.mod h1:xhWf0FNVPg57R7Z0UbKHbJfkEywrmjJnf7w5xrFpKfA=
 github.com/google/go-cmp v0.7.0 h1:wk8382ETsv4JYUZwIsn6YpYiWiBsYLSJiTsyBybVuN8=
 github.com/google/go-cmp v0.7.0/go.mod h1:pXiqmnSA92OHEEa9HXL2W4E7lf9JzCmGVUdgjX3N/iU=
 github.com/gorilla/websocket v1.5.3 h1:saDtZ6Pbx/0u+bgYQ3q96pZgCzfhKXGPqt7kZ72aNNg=
 github.com/gorilla/websocket v1.5.3/go.mod h1:YR8l580nyteQvAITg2hZ9XVh4b55+EU/adAjf1fMHhE=
+github.com/konsorten/go-windows-terminal-sequences v1.0.1/go.mod h1:T0+1ngSBFLxvqU3pZ+m/2kptfBszLMUkC4ZK/EgS/cQ=
 github.com/pmezard/go-difflib v1.0.0 h1:4DBwDE0NGyQoBHbLQYPwSUPoCMWR5BEzIk/f1lZbAQM=
 github.com/pmezard/go-difflib v1.0.0/go.mod h1:iKH77koFhYxTK1pcRnkKkqfTogsbg7gZNVY4sRDYZ/4=
+github.com/saltosystems/winrt-go v0.0.0-20240509164145-4f7860a3bd2b h1:du3zG5fd8snsFN6RBoLA7fpaYV9ZQIsyH9snlk2Zvik=
+github.com/saltosystems/winrt-go v0.0.0-20240509164145-4f7860a3bd2b/go.mod h1:CIltaIm7qaANUIvzr0Vmz71lmQMAIbGJ7cvgzX7FMfA=
+github.com/sirupsen/logrus v1.5.0/go.mod h1:+F7Ogzej0PZc/94MaYx/nvG9jOFMD2osvC3s+Squfpo=
+github.com/sirupsen/logrus v1.9.3 h1:dueUQJ1C2q9oE3F7wvmSGAaVtTmUizReu6fjN8uqzbQ=
+github.com/sirupsen/logrus v1.9.3/go.mod h1:naHLuLoDiP4jHNo9R0sCBMtWGeIprob74mVsIT4qYEQ=
+github.com/soypat/cyw43439 v0.0.0-20250505012923-830110c8f4af h1:ZfFq94aH/BCSWWKd9RPUgdHOdgGKCnfl2VdvU9UksTA=
+github.com/soypat/cyw43439 v0.0.0-20250505012923-830110c8f4af/go.mod h1:MUaGO5m6X7xrkHrPDmnaxCEcuCCFN/0ZFh9oie+exbU=
+github.com/soypat/seqs v0.0.0-20250124201400-0d65bc7c1710 h1:Y9fBuiR/urFY/m76+SAZTxk2xAOS2n85f+H1CugajeA=
+github.com/soypat/seqs v0.0.0-20250124201400-0d65bc7c1710/go.mod h1:oCVCNGCHMKoBj97Zp9znLbQ1nHxpkmOY9X+UAGzOxc8=
+github.com/stretchr/objx v0.1.0/go.mod h1:HFkY916IF+rwdDfMAkV7OtwuqBVzrE8GR6GFx+wExME=
+github.com/stretchr/testify v1.2.2/go.mod h1:a8OnRcib4nhh0OaRAV+Yts87kKdq0PP7pXfy6kDkUVs=
+github.com/stretchr/testify v1.7.0/go.mod h1:6Fq8oRcR53rry900zMqJjRRixrwX3KX962/h/Wwjteg=
 github.com/stretchr/testify v1.8.4 h1:CcVxjf3Q8PM0mHUKJCdn+eZZtm5yQwehR5yeSVQQcUk=
 github.com/stretchr/testify v1.8.4/go.mod h1:sz/lmYIOXD/1dqDmKjjqLyZ2RngseejIcXlSw2iwfAo=
+github.com/tinygo-org/cbgo v0.0.4 h1:3D76CRYbH03Rudi8sEgs/YO0x3JIMdyq8jlQtk/44fU=
+github.com/tinygo-org/cbgo v0.0.4/go.mod h1:7+HgWIHd4nbAz0ESjGlJ1/v9LDU1Ox8MGzP9mah/fLk=
+github.com/tinygo-org/pio v0.2.0 h1:vo3xa6xDZ2rVtxrks/KcTZHF3qq4lyWOntvEvl2pOhU=
+github.com/tinygo-org/pio v0.2.0/go.mod h1:LU7Dw00NJ+N86QkeTGjMLNkYcEYMor6wTDpTCu0EaH8=
 go.bug.st/serial v1.6.4 h1:7FmqNPgVp3pu2Jz5PoPtbZ9jJO5gnEnZIvnI1lzve8A=
 go.bug.st/serial v1.6.4/go.mod h1:nofMJxTeNVny/m6+KaafC6vJGj3miwQZ6vW4BZUGJPI=
+golang.org/x/exp v0.0.0-20241204233417-43b7b7cde48d h1:0olWaB5pg3+oychR51GUVCEsGkeCU/2JxjBgIo4f3M0=
+golang.org/x/exp v0.0.0-20241204233417-43b7b7cde48d/go.mod h1:qj5a5QZpwLU2NLQudwIN5koi3beDhSAlJwa67PuM98c=
+golang.org/x/sys v0.0.0-20190422165155-953cdadca894/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
+golang.org/x/sys v0.0.0-20190916202348-b4ddaad3f8a3/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
+golang.org/x/sys v0.0.0-20220715151400-c0bba94af5f8/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
 golang.org/x/sys v0.19.0 h1:q5f1RH2jigJ1MoAWp2KTp3gm5zAGFUTarQZ5U386+4o=
 golang.org/x/sys v0.19.0/go.mod h1:/VUhepiaJMQUp4+oa/7Zr1D23ma6VTLIYjOOTFZPUcA=
 google.golang.org/protobuf v1.36.11 h1:fV6ZwhNocDyBLK0dj+fg8ektcVegBBuEolpbTQyBNVE=
 google.golang.org/protobuf v1.36.11/go.mod h1:HTf+CrKn2C3g5S8VImy6tdcUvCska2kB7j23XfzDpco=
+gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
+gopkg.in/yaml.v3 v3.0.0-20200313102051-9f266ea9e77c/go.mod h1:K4uyk7z7BCEPqu6E+C64Yfv1cQ7kz7rIZviUmN+EgEM=
 gopkg.in/yaml.v3 v3.0.1 h1:fxVm/GzAzEWqLHuvctI91KS9hhNmmWOoWu0XTYJS7CA=
 gopkg.in/yaml.v3 v3.0.1/go.mod h1:K4uyk7z7BCEPqu6E+C64Yfv1cQ7kz7rIZviUmN+EgEM=
+tinygo.org/x/bluetooth v0.13.0 h1:3pkTMcfqv71HoAxG4DBTm2n+1bm6Nqqz8eoHjSW9+5g=
+tinygo.org/x/bluetooth v0.13.0/go.mod h1:YnyJRVX09i+wkFeHpXut0b+qHq+T2WwKBRRiF/scANA=

goTool/host_conn.go

@@ -0,0 +1,266 @@
+package main
+
+import (
+	"fmt"
+	"time"
+
+	"google.golang.org/protobuf/proto"
+	pb "powerpod/gotool/pb"
+)
+
+// hostConn is the UART or BLE host transport used by CLI commands.
+type hostConn interface {
+	exchangePayload(payload []byte, cmdName string) ([]byte, error)
+	exchange(cmdID byte, cmdName string) ([]byte, error)
+	Close() error
+}
+
+// optional stream source (BLE only)
+type hostStreamConn interface {
+	hostConn
+	// NextStreamTick waits for a BLE_STREAM_TICK payload (type byte + protobuf).
+	NextStreamTick(timeout time.Duration) ([]byte, error)
+}
+
+func hostGetVersion(h hostConn) (*pb.VersionResponse, error) {
+	payload, err := h.exchange(byte(pb.MessageType_VERSION), "VERSION")
+	if err != nil {
+		return nil, err
+	}
+	return decodeVersionPayload(payload)
+}
+
+func hostListClients(h hostConn) ([]*pb.ClientInfo, error) {
+	payload, err := h.exchange(byte(pb.MessageType_CLIENT_INFO), "CLIENT_INFO")
+	if err != nil {
+		return nil, err
+	}
+	return decodeClientsPayload(payload)
+}
+
+func hostReadCacheStatus(h hostConn) (*pb.CacheStatusResponse, error) {
+	payload, err := h.exchange(byte(pb.MessageType_CACHE_STATUS), "CACHE_STATUS")
+	if err != nil {
+		return nil, err
+	}
+	return decodeCacheStatusPayload(payload)
+}
+
+func hostAccelStream(h hostConn, req *pb.AccelStreamRequest) (*pb.AccelStreamResponse, error) {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_ACCEL_STREAM,
+		Payload: &pb.UartMessage_AccelStreamRequest{
+			AccelStreamRequest: req,
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_ACCEL_STREAM)}, body...)
+	respPayload, err := h.exchangePayload(payload, "ACCEL_STREAM")
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetAccelStreamResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing accel_stream_response")
+	}
+	return r, nil
+}
+
+func hostFindMe(h hostConn, clientID uint32) error {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_FIND_ME,
+		Payload: &pb.UartMessage_EspnowFindMeRequest{
+			EspnowFindMeRequest: &pb.EspNowFindMeRequest{ClientId: clientID},
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_FIND_ME)}, body...)
+	respPayload, err := h.exchangePayload(payload, "FIND_ME")
+	if err != nil {
+		return err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetEspnowFindMeResponse()
+	if r == nil {
+		return fmt.Errorf("missing espnow_find_me_response")
+	}
+	if !r.GetSuccess() {
+		return fmt.Errorf("find-me rejected (client_id=%d)", r.GetClientId())
+	}
+	return nil
+}
+
+func hostRestart(h hostConn, clientID uint32) error {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_RESTART,
+		Payload: &pb.UartMessage_RestartRequest{
+			RestartRequest: &pb.RestartRequest{ClientId: clientID},
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_RESTART)}, body...)
+	respPayload, err := h.exchangePayload(payload, "RESTART")
+	if err != nil {
+		return err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetRestartResponse()
+	if r == nil {
+		return fmt.Errorf("missing restart_response")
+	}
+	if !r.GetSuccess() {
+		return fmt.Errorf("restart rejected (client_id=%d)", r.GetClientId())
+	}
+	return nil
+}
+
+func hostSetLogLevel(h hostConn, write bool, level uint32) (*pb.SetLogLevelResponse, error) {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_SET_LOG_LEVEL,
+		Payload: &pb.UartMessage_SetLogLevelRequest{
+			SetLogLevelRequest: &pb.SetLogLevelRequest{Write: write, Level: level},
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_SET_LOG_LEVEL)}, body...)
+	respPayload, err := h.exchangePayload(payload, "SET_LOG_LEVEL")
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetSetLogLevelResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing set_log_level_response")
+	}
+	return r, nil
+}
+
+func hostInputSendMode(h hostConn, req *pb.InputSendModeRequest) (*pb.InputSendModeResponse, error) {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_INPUT_SEND_MODE,
+		Payload: &pb.UartMessage_InputSendModeRequest{
+			InputSendModeRequest: req,
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_INPUT_SEND_MODE)}, body...)
+	respPayload, err := h.exchangePayload(payload, "INPUT_SEND_MODE")
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetInputSendModeResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing input_send_mode_response")
+	}
+	return r, nil
+}
+
+func hostLedRing(h hostConn, req *pb.LedRingProgressRequest) (*pb.LedRingProgressResponse, error) {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_LED_RING,
+		Payload: &pb.UartMessage_LedRingProgressRequest{
+			LedRingProgressRequest: req,
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_LED_RING)}, body...)
+	respPayload, err := h.exchangePayload(payload, "LED_RING")
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetLedRingProgressResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing led_ring_progress_response")
+	}
+	return r, nil
+}
+
+func hostEchoPing(h hostConn, clientID uint32) (*EchoPingResult, error) {
+	t0 := time.Now()
+	timestampUs := uint64(t0.UnixMicro())
+	req := &pb.EspNowEchoPingRequest{
+		ClientId:    clientID,
+		TimestampUs: timestampUs,
+	}
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_ESPNOW_ECHO_PING,
+		Payload: &pb.UartMessage_EspnowEchoPingRequest{
+			EspnowEchoPingRequest: req,
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_ESPNOW_ECHO_PING)}, body...)
+	respPayload, err := h.exchangePayload(payload, "ESPNOW_ECHO_PING")
+	if err != nil {
+		return nil, err
+	}
+	rttMs := float64(time.Since(t0).Microseconds()) / 1000.0
+
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetEspnowEchoPingResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing espnow_echo_ping_response")
+	}
+	if !r.GetSuccess() {
+		return &EchoPingResult{
+			Success:  false,
+			ClientID: r.GetClientId(),
+			RttMs:    rttMs,
+		}, nil
+	}
+	if r.GetTimestampUs() != timestampUs {
+		return nil, fmt.Errorf("timestamp mismatch: sent %d got %d", timestampUs, r.GetTimestampUs())
+	}
+	return &EchoPingResult{
+		Success:     true,
+		ClientID:    r.GetClientId(),
+		TimestampUs: r.GetTimestampUs(),
+		RttMs:       rttMs,
+		EspRttUs:    r.GetEspRttUs(),
+	}, nil
+}

goTool/host_managed.go

@@ -0,0 +1,491 @@
+package main
+
+import (
+	"fmt"
+	"log"
+	"strings"
+	"sync"
+	"time"
+
+	"go.bug.st/serial"
+	"tinygo.org/x/bluetooth"
+)
+
+const (
+	hostTransportNone = "none"
+	hostTransportUART = "uart"
+	hostTransportBLE  = "ble"
+)
+
+// errHostBusy is returned when the link is held for OTA.
+var errHostBusy = errUARTBusy
+
+// managedHost is a reconnecting UART or BLE host link for serve/CLI.
+type managedHost struct {
+	quiet  bool
+	baud   int
+	settle time.Duration
+
+	mu        sync.Mutex
+	transport string // none|uart|ble
+	endpoint  string // port path or BLE address string
+	bleName   string // last connected BLE local name (optional)
+	sp        *serialPort
+	ble       *bleLink
+	otaActive bool
+	pausePoll bool   // true while BLE latency tests run (pollers yield)
+	uartPort  string // remembered UART port for reconnect
+}
+
+func newManagedHost(baud int) *managedHost {
+	if baud <= 0 {
+		baud = defaultBaud
+	}
+	return &managedHost{
+		baud:      baud,
+		transport: hostTransportNone,
+		settle:    time.Second,
+	}
+}
+
+// newManagedSerial keeps the old constructor name for call sites during migrate.
+func newManagedSerial(portName string, baud int) *managedHost {
+	m := newManagedHost(baud)
+	if portName != "" {
+		m.uartPort = portName
+		m.endpoint = portName
+		m.transport = hostTransportUART
+	}
+	return m
+}
+
+func (m *managedHost) Transport() string {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	if m.transport == "" {
+		return hostTransportNone
+	}
+	return m.transport
+}
+
+func (m *managedHost) Endpoint() string {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	return m.endpoint
+}
+
+func (m *managedHost) Close() error {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	return m.disconnectLocked()
+}
+
+func (m *managedHost) IsConnected() bool {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	switch m.transport {
+	case hostTransportUART:
+		return m.sp != nil
+	case hostTransportBLE:
+		return m.ble != nil
+	default:
+		return false
+	}
+}
+
+func (m *managedHost) disconnectLocked() error {
+	var err error
+	if m.sp != nil {
+		err = m.sp.port.Close()
+		m.sp = nil
+	}
+	if m.ble != nil {
+		e := m.ble.Close()
+		if err == nil {
+			err = e
+		}
+		m.ble = nil
+	}
+	m.transport = hostTransportNone
+	return err
+}
+
+func (m *managedHost) Disconnect() error {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	ep := m.endpoint
+	err := m.disconnectLocked()
+	if !m.quiet && ep != "" {
+		log.Printf("host disconnected (%s)", ep)
+	}
+	return err
+}
+
+func (m *managedHost) ConnectUART(port string, baud int) error {
+	if port == "" {
+		return fmt.Errorf("UART port required")
+	}
+	if baud <= 0 {
+		baud = m.baud
+	}
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	if m.otaActive {
+		return errHostBusy
+	}
+	_ = m.disconnectLocked()
+	m.baud = baud
+	m.uartPort = port
+	m.endpoint = port
+	m.transport = hostTransportUART
+	if err := m.openUARTLocked(); err != nil {
+		m.transport = hostTransportNone
+		m.endpoint = ""
+		return err
+	}
+	return nil
+}
+
+func (m *managedHost) ConnectBLE(address string, name string) error {
+	if address == "" && name == "" {
+		return fmt.Errorf("BLE address or name required")
+	}
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	if m.otaActive {
+		return errHostBusy
+	}
+	_ = m.disconnectLocked()
+
+	var link *bleLink
+	var err error
+	settle := m.settle
+	m.mu.Unlock()
+	if address != "" {
+		link, err = openBLEAddress(address, settle)
+	} else {
+		link, err = openBLE(name, settle)
+	}
+	m.mu.Lock()
+	if err != nil {
+		return err
+	}
+	link.quiet = m.quiet
+	m.ble = link
+	m.transport = hostTransportBLE
+	if address != "" {
+		m.endpoint = address
+	} else {
+		m.endpoint = name
+	}
+	m.bleName = name
+	if !m.quiet {
+		log.Printf("BLE host connected (%s)", m.endpoint)
+	}
+	return nil
+}
+
+func (m *managedHost) openUARTLocked() error {
+	sp, err := openSerial(m.uartPort, m.baud)
+	if err != nil {
+		return err
+	}
+	sp.quiet = m.quiet
+	m.sp = sp
+	if !m.quiet {
+		log.Printf("UART %s connected (%d baud)", m.uartPort, m.baud)
+	}
+	return nil
+}
+
+func (m *managedHost) openLocked() error {
+	return m.openUARTLocked()
+}
+
+func (m *managedHost) closeLocked() error {
+	return m.disconnectLocked()
+}
+
+func (m *managedHost) invalidateLocked(reason error) {
+	if m.sp == nil && m.ble == nil {
+		return
+	}
+	if !m.quiet {
+		log.Printf("host %s disconnected: %v", m.endpoint, reason)
+	}
+	_ = m.disconnectLocked()
+	// remember transport intent for UART reconnect
+	if m.uartPort != "" && m.transport == hostTransportNone {
+		// after invalidate, leave as none; poller will try Connect again via open
+		m.transport = hostTransportUART
+		m.endpoint = m.uartPort
+	}
+}
+
+func (m *managedHost) withPort(fn func(*serialPort) error) error {
+	return m.withPortLocked(false, fn)
+}
+
+func (m *managedHost) withPortPoll(fn func(*serialPort) error) error {
+	return m.withPortLocked(true, fn)
+}
+
+func (m *managedHost) withPortLocked(poll bool, fn func(*serialPort) error) error {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	if m.otaActive {
+		return errHostBusy
+	}
+	if m.transport == hostTransportBLE {
+		return fmt.Errorf("operation requires UART host (DIP8=0)")
+	}
+	if m.transport != hostTransportUART && m.uartPort == "" {
+		return fmt.Errorf("not connected")
+	}
+	if m.transport == hostTransportNone && m.uartPort != "" {
+		m.transport = hostTransportUART
+		m.endpoint = m.uartPort
+	}
+	if m.sp == nil {
+		if err := m.openUARTLocked(); err != nil {
+			return fmt.Errorf("%s: %w", m.uartPort, err)
+		}
+	}
+	err := fn(m.sp)
+	if err != nil {
+		m.invalidateLocked(err)
+	}
+	return err
+}
+
+func (m *managedHost) recoverAfterMasterRestart() {
+	const bootWait = 6 * time.Second
+	m.mu.Lock()
+	tr := m.transport
+	m.disconnectLocked()
+	if tr == hostTransportUART {
+		m.transport = hostTransportUART
+		m.endpoint = m.uartPort
+	}
+	m.mu.Unlock()
+
+	log.Printf("host: master restart — waiting %s for boot", bootWait)
+	time.Sleep(bootWait)
+
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	if m.transport == hostTransportUART {
+		if err := m.openUARTLocked(); err != nil {
+			log.Printf("UART reconnect after master restart: %v", err)
+			return
+		}
+		m.sp.flushInput()
+		log.Printf("UART %s ready after master restart", m.uartPort)
+	}
+}
+
+func (m *managedHost) exchangePayload(payload []byte, cmdName string) ([]byte, error) {
+	return m.exchangePayloadMode(false, payload, cmdName, readTimeout)
+}
+
+func (m *managedHost) exchangePayloadPoll(payload []byte, cmdName string) ([]byte, error) {
+	return m.exchangePayloadMode(true, payload, cmdName, readTimeout)
+}
+
+func (m *managedHost) beginPausePoll() bool {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	if m.otaActive || m.pausePoll {
+		return false
+	}
+	m.pausePoll = true
+	return true
+}
+
+func (m *managedHost) endPausePoll() {
+	m.mu.Lock()
+	m.pausePoll = false
+	m.mu.Unlock()
+}
+
+func (m *managedHost) PollPaused() bool {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	return m.pausePoll || m.otaActive
+}
+
+func (m *managedHost) exchangePayloadMode(poll bool, payload []byte, cmdName string, timeout time.Duration) ([]byte, error) {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	if m.otaActive || (poll && m.pausePoll) {
+		return nil, errHostBusy
+	}
+	switch m.transport {
+	case hostTransportBLE:
+		if m.ble == nil {
+			return nil, fmt.Errorf("BLE not connected")
+		}
+		resp, err := m.ble.exchangePayloadTimeout(payload, cmdName, timeout)
+		if err != nil {
+			m.invalidateLocked(err)
+		}
+		return resp, err
+	case hostTransportUART, hostTransportNone:
+		if m.uartPort == "" && m.sp == nil {
+			return nil, fmt.Errorf("not connected")
+		}
+		if m.transport == hostTransportNone {
+			m.transport = hostTransportUART
+			m.endpoint = m.uartPort
+		}
+		if m.sp == nil {
+			if err := m.openUARTLocked(); err != nil {
+				return nil, fmt.Errorf("%s: %w", m.uartPort, err)
+			}
+		}
+		resp, err := m.sp.exchangePayloadLocked(payload, cmdName, timeout)
+		if err != nil {
+			m.invalidateLocked(err)
+		}
+		return resp, err
+	default:
+		return nil, fmt.Errorf("not connected")
+	}
+}
+
+func (m *managedHost) exchange(cmdID byte, cmdName string) ([]byte, error) {
+	return m.exchangePayload([]byte{cmdID}, cmdName)
+}
+
+func (m *managedHost) exchangePoll(cmdID byte, cmdName string) ([]byte, error) {
+	return m.exchangePayloadPoll([]byte{cmdID}, cmdName)
+}
+
+func (m *managedHost) exchangePayloadVia(
+	portFn func(func(*serialPort) error) error,
+	payload []byte, cmdName string,
+) ([]byte, error) {
+	// Prefer transport-aware path (works for BLE too).
+	_ = portFn
+	return m.exchangePayload(payload, cmdName)
+}
+
+func (m *managedHost) exchangeVia(
+	portFn func(func(*serialPort) error) error,
+	cmdID byte, cmdName string,
+) ([]byte, error) {
+	_ = portFn
+	return m.exchange(cmdID, cmdName)
+}
+
+func (m *managedHost) NextStreamTick(timeout time.Duration) ([]byte, error) {
+	m.mu.Lock()
+	ble := m.ble
+	tr := m.transport
+	m.mu.Unlock()
+	if tr != hostTransportBLE || ble == nil {
+		return nil, fmt.Errorf("BLE stream ticks require BLE host")
+	}
+	return ble.NextStreamTick(timeout)
+}
+
+func (m *managedHost) HostStatus() map[string]any {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	connected := false
+	switch m.transport {
+	case hostTransportUART:
+		connected = m.sp != nil
+	case hostTransportBLE:
+		connected = m.ble != nil
+	}
+	return map[string]any{
+		"transport": m.transportOrNone(),
+		"endpoint":  m.endpoint,
+		"connected": connected,
+		"ble_name":  m.bleName,
+	}
+}
+
+func (m *managedHost) transportOrNone() string {
+	if m.transport == "" {
+		return hostTransportNone
+	}
+	return m.transport
+}
+
+func listSerialPorts() ([]string, error) {
+	ports, err := serial.GetPortsList()
+	if err != nil {
+		return nil, err
+	}
+	if ports == nil {
+		return []string{}, nil
+	}
+	return ports, nil
+}
+
+type bleScanDevice struct {
+	Address string `json:"address"`
+	Name    string `json:"name"`
+	RSSI    int    `json:"rssi"`
+}
+
+func scanBLEDevices(timeout time.Duration, nameFilter string) ([]bleScanDevice, error) {
+	if timeout <= 0 {
+		timeout = 5 * time.Second
+	}
+	adapter := bluetooth.DefaultAdapter
+	if err := adapter.Enable(); err != nil {
+		return nil, fmt.Errorf("enable bluetooth: %w", err)
+	}
+
+	seen := map[string]bleScanDevice{}
+	var mu sync.Mutex
+	go func() {
+		time.Sleep(timeout)
+		_ = adapter.StopScan()
+	}()
+	filter := strings.TrimSpace(nameFilter)
+	_ = adapter.Scan(func(a *bluetooth.Adapter, result bluetooth.ScanResult) {
+		name := result.LocalName()
+		if filter != "" && !strings.Contains(strings.ToLower(name), strings.ToLower(filter)) {
+			return
+		}
+		addr := result.Address.String()
+		mu.Lock()
+		seen[addr] = bleScanDevice{
+			Address: addr,
+			Name:    name,
+			RSSI:    int(result.RSSI),
+		}
+		mu.Unlock()
+	})
+	// StopScan ends Scan; ignore error and return whatever was found.
+	mu.Lock()
+	defer mu.Unlock()
+	out := make([]bleScanDevice, 0, len(seen))
+	for _, d := range seen {
+		out = append(out, d)
+	}
+	return out, nil
+}
+
+func disconnectedState(portName string, err error) DashboardState {
+	msg := "host disconnected"
+	if err != nil {
+		msg = err.Error()
+	}
+	return DashboardState{
+		UpdatedAt:     time.Now().Format(time.RFC3339),
+		SerialPort:    portName,
+		HostEndpoint:  portName,
+		UARTConnected: false,
+		HostConnected: false,
+		HostTransport: hostTransportNone,
+		SerialOK:      false,
+		SerialError:   msg,
+		Master:        MasterView{OK: false, Error: msg},
+		Clients:       []ClientView{},
+	}
+}

goTool/led_ring_api.go

@@ -0,0 +1,109 @@
+package main
+
+import (
+	"fmt"
+	"strings"
+
+	"powerpod/gotool/pb"
+)
+
+const (
+	ledRingModeClear    = 0
+	ledRingModeProgress = 1
+	ledRingModeDigit    = 2
+	ledRingModeBlink    = 3
+	ledRingModeFindMe   = 4
+	ledRingModeColor    = 5
+	ledRingModeBatteryLow = 6
+)
+
+type ledRingAPIRequest struct {
+	Mode       string `json:"mode"`
+	ClientID   uint32 `json:"client_id"`
+	AllClients bool   `json:"all_clients"`
+	SlavesOnly bool   `json:"slaves_only"`
+	Progress   uint32 `json:"progress"`
+	Digit      uint32 `json:"digit"`
+	R          uint32 `json:"r"`
+	G          uint32 `json:"g"`
+	B          uint32 `json:"b"`
+	Intensity  uint32 `json:"intensity"`
+	BlinkMs    uint32 `json:"blink_ms"`
+	BlinkCount uint32 `json:"blink_count"`
+}
+
+type ledRingAPIResponse struct {
+	Type          string `json:"type,omitempty"` // led_ring_status (WebSocket)
+	Success       bool   `json:"success"`
+	Mode          uint32 `json:"mode,omitempty"`
+	Progress      uint32 `json:"progress,omitempty"`
+	Digit         uint32 `json:"digit,omitempty"`
+	ClientID      uint32 `json:"client_id,omitempty"`
+	SlavesUpdated uint32 `json:"slaves_updated,omitempty"`
+	Error         string `json:"error,omitempty"`
+}
+
+func ledRingModeFromString(s string) (uint32, error) {
+	switch strings.ToLower(strings.TrimSpace(s)) {
+	case "clear", "":
+		return ledRingModeClear, nil
+	case "color", "solid", "fill":
+		return ledRingModeColor, nil
+	case "progress":
+		return ledRingModeProgress, nil
+	case "digit":
+		return ledRingModeDigit, nil
+	case "blink":
+		return ledRingModeBlink, nil
+	case "find-me", "find_me", "findme":
+		return ledRingModeFindMe, nil
+	case "battery-low", "battery_low", "batterylow":
+		return ledRingModeBatteryLow, nil
+	default:
+		return 0, fmt.Errorf("unknown mode %q (clear, color, progress, digit, blink, find-me, battery-low)", s)
+	}
+}
+
+func ledRingPBFromAPI(in ledRingAPIRequest) (*pb.LedRingProgressRequest, error) {
+	mode, err := ledRingModeFromString(in.Mode)
+	if err != nil {
+		return nil, err
+	}
+	return &pb.LedRingProgressRequest{
+		Mode:       mode,
+		Progress:   in.Progress,
+		Digit:      in.Digit,
+		R:          in.R,
+		G:          in.G,
+		B:          in.B,
+		Intensity:  in.Intensity,
+		BlinkMs:    in.BlinkMs,
+		BlinkCount: in.BlinkCount,
+		ClientId:   in.ClientID,
+		AllClients: in.AllClients,
+		SlavesOnly: in.SlavesOnly,
+	}, nil
+}
+
+func applyLedRing(link *managedSerial, in ledRingAPIRequest) ledRingAPIResponse {
+	req, err := ledRingPBFromAPI(in)
+	if err != nil {
+		return ledRingAPIResponse{Error: err.Error()}
+	}
+	resp, err := link.LedRing(req)
+	if err != nil {
+		return ledRingAPIResponse{Error: err.Error()}
+	}
+	out := ledRingAPIResponse{
+		Success:       resp.GetSuccess(),
+		Mode:          resp.GetMode(),
+		Progress:      resp.GetProgress(),
+		Digit:         resp.GetDigit(),
+		ClientID:      resp.GetClientId(),
+		SlavesUpdated: resp.GetSlavesUpdated(),
+	}
+	if !out.Success && out.Error == "" {
+		out.Error = "led ring command rejected"
+	}
+	return out
+}

goTool/main.go

@@ -5,29 +5,47 @@ import (
 	"fmt"
 	"log"
 	"os"
+	"time"
 )
 
 const defaultBaud = 921600
 
 func usage() {
-	fmt.Fprintf(os.Stderr, "usage: gotool [-port /dev/ttyUSB0] <command>\n")
+	fmt.Fprintf(os.Stderr, "usage: gotool [-port /dev/ttyUSB0 | -ble] <command>\n")
+	fmt.Fprintf(os.Stderr, "  DIP8 on master: 0=UART (-port), 1=BLE (-ble); reboot after DIP change\n")
 	fmt.Fprintf(os.Stderr, "  test uses uart.master from bench config when -port is omitted\n\n")
 	fmt.Fprintf(os.Stderr, "commands:\n")
 	fmt.Fprintf(os.Stderr, "  version   firmware version and git hash\n")
-	fmt.Fprintf(os.Stderr, "  clients   registered ESP-NOW slaves on the master\n")
+	fmt.Fprintf(os.Stderr, "  clients          registered ESP-NOW slaves on the master\n")
+	fmt.Fprintf(os.Stderr, "  clients-reset-ids clear master id map + live registry (notifies online slaves)\n")
 	fmt.Fprintf(os.Stderr, "  deadzone      get/set accelerometer deadzone (LSB)\n")
+	fmt.Fprintf(os.Stderr, "  tap-config    get/set BMA456 tap detection parameters\n")
+	fmt.Fprintf(os.Stderr, "  tap-notify    get/set which tap kinds notify via ESP-NOW\n")
+	fmt.Fprintf(os.Stderr, "  cache-status  subscribed accel + tap cache (one round-trip)\n")
+	fmt.Fprintf(os.Stderr, "  accel-stream  enable/disable ESP-NOW accel stream (+ BLE period)\n")
 	fmt.Fprintf(os.Stderr, "  unicast-test  send ESP-NOW unicast test to one slave\n")
+	fmt.Fprintf(os.Stderr, "  echo-ping     ESP-NOW timestamp echo round-trip to one slave\n")
+	fmt.Fprintf(os.Stderr, "  ble-rtt       Host↔Master RTT via VERSION (N samples)\n")
+	fmt.Fprintf(os.Stderr, "  ble-stream    enable stream + measure BleStreamTick window\n")
 	fmt.Fprintf(os.Stderr, "  test          run automated scenario (see testdata/)\n")
-	fmt.Fprintf(os.Stderr, "  serve         web dashboard (Bootstrap + WebSocket)\n")
-	fmt.Fprintf(os.Stderr, "  ota           UART OTA upload (A/B partitions)\n")
+	fmt.Fprintf(os.Stderr, "  serve         web dashboard (optional -port / -ble; connect from UI)\n")
+	fmt.Fprintf(os.Stderr, "  ota           host OTA upload (A/B partitions; UART or BLE)\n")
 	fmt.Fprintf(os.Stderr, "  ota-progress  query per-slave ESP-NOW OTA progress on master\n")
-	fmt.Fprintf(os.Stderr, "  led-ring      set LED ring progress bar (0–100%%, rgb, intensity)\n\n")
+	fmt.Fprintf(os.Stderr, "  led-ring      set LED ring progress bar (0–100%%, rgb, intensity)\n")
+	fmt.Fprintf(os.Stderr, "  find-me       blink LED ring red/green/blue (3× each, full brightness)\n")
+	fmt.Fprintf(os.Stderr, "  restart       reboot master or slave (ESP-NOW)\n")
+	fmt.Fprintf(os.Stderr, "  log-level     get/set master ESP-IDF log level (global)\n")
+	fmt.Fprintf(os.Stderr, "  battery-uv    get/set software LiPo UV protection (per pod / all)\n")
+	fmt.Fprintf(os.Stderr, "  input-send-mode  get/set slave accel/tap ESP-NOW send path\n\n")
 	flag.PrintDefaults()
 }
 
 func main() {
-	portName := flag.String("port", "", "serial port (e.g. /dev/ttyUSB0)")
+	portName := flag.String("port", "", "serial port (e.g. /dev/ttyUSB0); XOR with -ble")
 	baud := flag.Int("baud", defaultBaud, "UART baud rate")
+	useBLE := flag.Bool("ble", false, "use BLE host transport (DIP8=1); XOR with -port")
+	bleName := flag.String("ble-name", bleDefaultName, "BLE advertised name")
+	bleSettle := flag.Float64("ble-settle", 1.0, "seconds to settle after BLE connect")
 	flag.Parse()
 
 	if flag.NArg() < 1 {
@@ -40,40 +58,152 @@ func main() {
 	var runErr error
 	switch cmd {
 	case "test", "autotest":
+		if *useBLE {
+			runErr = fmt.Errorf("autotest requires -port (UART)")
+			break
+		}
 		runErr = runTest(*portName, *baud, flag.Args()[1:])
 	case "serve", "web", "dashboard":
-		if *portName == "" {
-			fmt.Fprintf(os.Stderr, "command %q requires -port\n\n", cmd)
+		if *useBLE && *portName != "" {
+			fmt.Fprintf(os.Stderr, "use either -port or -ble, not both\n")
+			os.Exit(2)
+		}
+		runErr = runServe(serveOpts{
+			portName: *portName,
+			baud:     *baud,
+			useBLE:   *useBLE,
+			bleName:  *bleName,
+			settle:   time.Duration(*bleSettle * float64(time.Second)),
+		}, flag.Args()[1:])
+	case "version", "clients", "client-info", "clients-reset-ids", "clients_reset_ids", "deadzone", "accel-deadzone", "tap-config", "tap_config", "tap-notify", "tap_notify", "cache-status", "cache_status", "accel-stream", "accel_stream", "unicast-test", "unicast_test", "echo-ping", "echo_ping", "ble-rtt", "ble_rtt", "ble-stream", "ble_stream", "led-ring", "led_ring", "find-me", "find_me", "restart", "log-level", "log_level", "input-send-mode", "input_send_mode", "ota", "ota-progress", "ota_progress":
+		if *useBLE && *portName != "" {
+			fmt.Fprintf(os.Stderr, "use either -port or -ble, not both\n")
+			os.Exit(2)
+		}
+		if !*useBLE && *portName == "" {
+			fmt.Fprintf(os.Stderr, "command %q requires -port or -ble\n\n", cmd)
 			usage()
 			os.Exit(2)
 		}
-		runErr = runServe(*portName, *baud, flag.Args()[1:])
-	case "version", "clients", "client-info", "deadzone", "accel-deadzone", "unicast-test", "unicast_test", "led-ring", "led_ring", "ota", "ota-progress", "ota_progress":
-		if *portName == "" {
-			fmt.Fprintf(os.Stderr, "command %q requires -port\n\n", cmd)
-			usage()
-			os.Exit(2)
+		var h hostConn
+		if *useBLE {
+			bl, err := openBLE(*bleName, time.Duration(*bleSettle*float64(time.Second)))
+			if err != nil {
+				log.Fatalf("open BLE: %v", err)
+			}
+			h = bl
+		} else {
+			sp, err := openSerial(*portName, *baud)
+			if err != nil {
+				log.Fatalf("open serial: %v", err)
+			}
+			h = sp
 		}
-		sp, err := openSerial(*portName, *baud)
-		if err != nil {
-			log.Fatalf("open serial: %v", err)
-		}
-		defer sp.Close()
+		registerShutdown(func() { _ = h.Close() })
+		enableShutdownOnInterrupt()
+		defer h.Close()
+
 		switch cmd {
 		case "version":
-			runErr = runVersion(sp)
+			runErr = runVersionHost(h)
 		case "clients", "client-info":
-			runErr = runClients(sp)
+			runErr = runClientsHost(h)
+		case "clients-reset-ids", "clients_reset_ids":
+			sp, ok := h.(*serialPort)
+			if !ok {
+				runErr = fmt.Errorf("%s over BLE not wired yet; use -port", cmd)
+				break
+			}
+			runErr = runClientsResetIds(sp)
+		case "cache-status", "cache_status":
+			runErr = runCacheStatusHost(h)
+		case "accel-stream", "accel_stream":
+			runErr = runAccelStreamCmd(h, flag.Args()[1:])
+		case "echo-ping", "echo_ping":
+			runErr = runEchoPingHost(h, flag.Args()[1:])
+		case "ble-rtt", "ble_rtt":
+			runErr = runBleRtt(h, flag.Args()[1:])
+		case "ble-stream", "ble_stream":
+			runErr = runBleStream(h, flag.Args()[1:])
 		case "deadzone", "accel-deadzone":
+			sp, ok := h.(*serialPort)
+			if !ok {
+				runErr = fmt.Errorf("%s over BLE not wired yet; use -port", cmd)
+				break
+			}
 			runErr = runDeadzone(sp, flag.Args()[1:])
+		case "tap-config", "tap_config":
+			sp, ok := h.(*serialPort)
+			if !ok {
+				runErr = fmt.Errorf("%s over BLE not wired yet; use -port", cmd)
+				break
+			}
+			runErr = runTapConfig(sp, flag.Args()[1:])
+		case "battery-uv", "battery_uv":
+			sp, ok := h.(*serialPort)
+			if !ok {
+				runErr = fmt.Errorf("%s over BLE not wired yet; use -port", cmd)
+				break
+			}
+			runErr = runBatteryUv(sp, flag.Args()[1:])
+		case "tap-notify", "tap_notify":
+			sp, ok := h.(*serialPort)
+			if !ok {
+				runErr = fmt.Errorf("%s over BLE not wired yet; use -port", cmd)
+				break
+			}
+			runErr = runTapNotify(sp, flag.Args()[1:])
 		case "unicast-test", "unicast_test":
+			sp, ok := h.(*serialPort)
+			if !ok {
+				runErr = fmt.Errorf("%s over BLE not wired yet; use -port", cmd)
+				break
+			}
 			runErr = runUnicastTest(sp, flag.Args()[1:])
 		case "led-ring", "led_ring":
+			sp, ok := h.(*serialPort)
+			if !ok {
+				runErr = fmt.Errorf("%s over BLE not wired yet; use -port", cmd)
+				break
+			}
 			runErr = runLedRing(sp, flag.Args()[1:])
+		case "find-me", "find_me":
+			sp, ok := h.(*serialPort)
+			if !ok {
+				runErr = fmt.Errorf("%s over BLE not wired yet; use -port", cmd)
+				break
+			}
+			runErr = runFindMe(sp, flag.Args()[1:])
+		case "restart":
+			sp, ok := h.(*serialPort)
+			if !ok {
+				runErr = fmt.Errorf("%s over BLE not wired yet; use -port", cmd)
+				break
+			}
+			runErr = runRestart(sp, flag.Args()[1:])
+		case "log-level", "log_level":
+			sp, ok := h.(*serialPort)
+			if !ok {
+				runErr = fmt.Errorf("%s over BLE not wired yet; use -port", cmd)
+				break
+			}
+			runErr = runLogLevel(sp, flag.Args()[1:])
+		case "input-send-mode", "input_send_mode":
+			runErr = runInputSendModeCmd(h, flag.Args()[1:])
 		case "ota":
-			runErr = runOTA(sp, flag.Args()[1:])
+			t, ok := h.(otaTransport)
+			if !ok {
+				runErr = fmt.Errorf("ota: unsupported host transport")
+				break
+			}
+			runErr = runOTA(t, flag.Args()[1:])
 		case "ota-progress", "ota_progress":
-			runErr = runOtaProgress(sp, flag.Args()[1:])
+			t, ok := h.(otaTransport)
+			if !ok {
+				runErr = fmt.Errorf("ota-progress: unsupported host transport")
+				break
+			}
+			runErr = runOtaProgress(t, flag.Args()[1:])
 		}
 	default:
 		fmt.Fprintf(os.Stderr, "unknown command %q\n\n", cmd)
@@ -85,3 +215,76 @@ func main() {
 		log.Fatal(runErr)
 	}
 }
+
+func runVersionHost(h hostConn) error {
+	ver, err := hostGetVersion(h)
+	if err != nil {
+		return err
+	}
+	fmt.Printf("version:  %d\n", ver.GetVersion())
+	fmt.Printf("git_hash: %s\n", ver.GetGitHash())
+	return nil
+}
+
+func runClientsHost(h hostConn) error {
+	clients, err := hostListClients(h)
+	if err != nil {
+		return err
+	}
+	if len(clients) == 0 {
+		fmt.Println("no clients registered")
+		return nil
+	}
+	fmt.Printf("clients (%d):\n", len(clients))
+	for i, c := range clients {
+		fmt.Printf("  [%d] id=%d ver=%d available=%v used=%v\n",
+			i, c.GetId(), c.GetVersion(), c.GetAvailable(), c.GetUsed())
+	}
+	return nil
+}
+
+func runCacheStatusHost(h hostConn) error {
+	r, err := hostReadCacheStatus(h)
+	if err != nil {
+		return err
+	}
+	clients := r.GetClients()
+	if len(clients) == 0 {
+		fmt.Println("(no slaves with accel stream or tap notify enabled)")
+		return nil
+	}
+	for _, c := range clients {
+		id := c.GetClientId()
+		if a := c.GetAccel(); a != nil {
+			if !a.GetValid() {
+				fmt.Printf("client %d accel: no sample yet\n", id)
+			} else {
+				fmt.Printf("client %d accel: x=%d y=%d z=%d (age %d ms)\n",
+					id, a.GetX(), a.GetY(), a.GetZ(), a.GetAgeMs())
+			}
+		}
+		if t := c.GetTap(); t != nil {
+			fmt.Printf("client %d tap: %s (age %d ms)\n",
+				id, tapKindLabel(t.GetKind()), t.GetAgeMs())
+		}
+	}
+	return nil
+}
+
+func runEchoPingHost(h hostConn, args []string) error {
+	fs := flag.NewFlagSet("echo-ping", flag.ExitOnError)
+	clientID := fs.Uint("client", 0, "slave client id from `clients`")
+	if err := fs.Parse(args); err != nil {
+		return err
+	}
+	if *clientID == 0 {
+		return fmt.Errorf("client id required (see `gotool clients`)")
+	}
+	r, err := hostEchoPing(h, uint32(*clientID))
+	if err != nil {
+		return err
+	}
+	fmt.Printf("echo ping: success=%v client_id=%d rtt_ms=%.3f (host↔master↔slave) esp_rtt_us=%d (ESP-NOW only)\n",
+		r.Success, r.ClientID, r.RttMs, r.EspRttUs)
+	return nil
+}

goTool/ota_upload.go

@@ -2,25 +2,31 @@ package main
 
 import (
 	"fmt"
-	"log"
 	"time"
 
 	"google.golang.org/protobuf/proto"
 
-	uartframe "powerpod/gotool/uart"
 	"powerpod/gotool/pb"
+	uartframe "powerpod/gotool/uart"
 )
 
 const (
-	otaHostChunkSize     = 200
-	otaFlashBlockSize    = 4096
-	otaPrepareTimeout    = 120 * time.Second
+	otaHostChunkSize       = 200
+	otaFlashBlockSize      = 4096
+	otaPrepareTimeout      = 120 * time.Second
 	otaDefaultTimeout      = 15 * time.Second
 	otaStatusPollTimeout   = 3 * time.Second
 	otaDistReadTimeout     = 400 * time.Millisecond
 	otaDistQueryInterval   = 500 * time.Millisecond
 	otaDistQueryTimeout    = 2 * time.Second
 	otaDistEmitMinInterval = 150 * time.Millisecond
+	// Pace host chunks so the master UART RX ring is not overrun (~20 frames/block).
+	otaHostChunkPaceUART = 5 * time.Millisecond
+	// Slightly slower for BLE WriteWithoutResponse flow control.
+	otaHostChunkPaceBLE = 6 * time.Millisecond
+	otaBlockMaxRetries  = 3
+	// 200 B OTA_PAYLOAD → ~216 B framed; needs ATT MTU >= 219.
+	otaMinATTMTU = 219
 )
 
 const (
@@ -35,6 +41,14 @@ const (
 	otaDistTimeout    = 45 * time.Minute
 )
 
+// otaTransport is the host IO used by the OTA protocol (UART or BLE).
+type otaTransport interface {
+	writeMsg(msg *pb.UartMessage) error
+	readFrame(timeout time.Duration) ([]byte, error)
+	flushInput()
+	chunkPace() time.Duration
+}
+
 // OtaSlaveDetail is per-slave ESP-NOW OTA state from OTA_SLAVE_PROGRESS.
 type OtaSlaveDetail struct {
 	BytesWritten uint32 `json:"bytes_written"`
@@ -45,20 +59,20 @@ type OtaSlaveDetail struct {
 
 // OTAProgress is pushed to the dashboard during web uploads.
 type OTAProgress struct {
-	Type          string                     `json:"type"` // always "ota_progress"
-	Phase         string                     `json:"phase"`
-	Step          string                     `json:"step,omitempty"` // master, slaves
-	Percent       int                        `json:"percent"`
-	MasterPercent int                        `json:"master_percent,omitempty"`
-	MasterDone    bool                       `json:"master_done,omitempty"`
-	Message       string                     `json:"message"`
-	MasterMessage string                     `json:"master_message,omitempty"`
-	Bytes         uint32                     `json:"bytes_written,omitempty"`
-	Slot          uint32                     `json:"target_slot,omitempty"`
-	Slaves        uint32                     `json:"slaves,omitempty"`
-	ImageSize     uint32                     `json:"image_size,omitempty"`
-	SlaveProgress map[uint32]uint32          `json:"slave_progress,omitempty"` // client_id -> bytes
-	SlaveDetails  map[uint32]OtaSlaveDetail  `json:"slave_details,omitempty"`
+	Type          string                    `json:"type"` // always "ota_progress"
+	Phase         string                    `json:"phase"`
+	Step          string                    `json:"step,omitempty"` // master, slaves
+	Percent       int                       `json:"percent"`
+	MasterPercent int                       `json:"master_percent,omitempty"`
+	MasterDone    bool                      `json:"master_done,omitempty"`
+	Message       string                    `json:"message"`
+	MasterMessage string                    `json:"master_message,omitempty"`
+	Bytes         uint32                    `json:"bytes_written,omitempty"`
+	Slot          uint32                    `json:"target_slot,omitempty"`
+	Slaves        uint32                    `json:"slaves,omitempty"`
+	ImageSize     uint32                    `json:"image_size,omitempty"`
+	SlaveProgress map[uint32]uint32         `json:"slave_progress,omitempty"` // client_id -> bytes
+	SlaveDetails  map[uint32]OtaSlaveDetail `json:"slave_details,omitempty"`
 }
 
 type otaProgressFn func(OTAProgress)
@@ -69,16 +83,70 @@ const (
 )
 
 func runOTAUpload(m *managedSerial, firmware []byte, onProgress otaProgressFn) error {
+	push := func(phase, msg string) {
+		if onProgress == nil {
+			return
+		}
+		onProgress(OTAProgress{
+			Type: "ota_progress", Phase: phase, Step: otaStepMaster,
+			Percent: 0, Message: msg, MasterMessage: msg,
+		})
+	}
+	push("preparing", "Host wird für OTA vorbereitet…")
+
+	// Hold m.mu for the entire upload so dashboard/API polling cannot interleave.
 	m.mu.Lock()
-	defer m.mu.Unlock()
-	err := runOTAOnPortUnlocked(m, firmware, onProgress)
+	if m.otaActive {
+		m.mu.Unlock()
+		return errOTAInProgress
+	}
+	m.otaActive = true
+
+	var t otaTransport
+	switch m.transport {
+	case hostTransportBLE:
+		if m.ble == nil {
+			m.otaActive = false
+			m.mu.Unlock()
+			err := fmt.Errorf("BLE not connected")
+			push("error", err.Error())
+			return err
+		}
+		if err := m.ble.ensureOTAMTU(); err != nil {
+			m.otaActive = false
+			m.mu.Unlock()
+			push("error", err.Error())
+			return err
+		}
+		t = m.ble
+	case hostTransportUART, hostTransportNone:
+		if m.sp == nil {
+			if err := m.openLocked(); err != nil {
+				m.otaActive = false
+				m.mu.Unlock()
+				push("error", err.Error())
+				return err
+			}
+		}
+		t = m.sp
+	default:
+		m.otaActive = false
+		m.mu.Unlock()
+		err := fmt.Errorf("not connected")
+		push("error", err.Error())
+		return err
+	}
+
+	err := runOTAUnlocked(t, firmware, onProgress)
 	if err != nil {
 		m.invalidateLocked(err)
 	}
+	m.otaActive = false
+	m.mu.Unlock()
 	return err
 }
 
-func runOTAOnPortUnlocked(m *managedSerial, firmware []byte, onProgress otaProgressFn) error {
+func runOTAUnlocked(t otaTransport, firmware []byte, onProgress otaProgressFn) error {
 	if len(firmware) == 0 {
 		return fmt.Errorf("empty firmware")
 	}
@@ -120,33 +188,21 @@ func runOTAOnPortUnlocked(m *managedSerial, firmware []byte, onProgress otaProgr
 		onProgress(p)
 	}
 
-	if m.sp == nil {
-		if err := m.openLocked(); err != nil {
-			notify("error", "", 0, err.Error())
-			return err
-		}
-	}
-
-	sp := m.sp
-	if err := sp.port.SetReadTimeout(otaPrepareTimeout); err != nil {
-		notify("error", "", 0, err.Error())
-		return err
-	}
-	defer sp.port.SetReadTimeout(readTimeout)
-
 	notify("preparing", otaStepMaster, 0, fmt.Sprintf("Master: OTA start (%d bytes)…", imageSize))
 
-	if err := writeUartMessage(sp, &pb.UartMessage{
+	t.flushInput()
+
+	if err := t.writeMsg(&pb.UartMessage{
 		Type: pb.MessageType_OTA_START,
 		Payload: &pb.UartMessage_OtaStart{
 			OtaStart: &pb.OtaStartPayload{TotalSize: uint32(imageSize)},
 		},
-	}, false); err != nil {
+	}); err != nil {
 		notify("error", "", 0, err.Error())
 		return err
 	}
 
-	ready, err := waitOtaStatus(sp, otaStReady, otaPrepareTimeout, func(msg string) {
+	ready, err := waitOtaStatus(t, otaStReady, otaPrepareTimeout, func(msg string) {
 		notify("preparing", otaStepMaster, 2, msg)
 	})
 	if err != nil {
@@ -155,71 +211,98 @@ func runOTAOnPortUnlocked(m *managedSerial, firmware []byte, onProgress otaProgr
 	}
 	notify("ready", otaStepMaster, 5, fmt.Sprintf("Master: Slot %d bereit", ready.GetTargetSlot()))
 
-	if err := sp.port.SetReadTimeout(otaDefaultTimeout); err != nil {
-		notify("error", "", 0, err.Error())
-		return err
-	}
-
+	pace := t.chunkPace()
 	var seq uint32
 	for offset := 0; offset < imageSize; {
-		bytesInBlock := 0
-		for bytesInBlock < otaFlashBlockSize && offset < imageSize {
-			n := otaHostChunkSize
-			room := otaFlashBlockSize - bytesInBlock
-			if n > room {
-				n = room
-			}
-			if offset+n > imageSize {
-				n = imageSize - offset
-			}
-			chunk := firmware[offset : offset+n]
+		blockStart := offset
+		blockStartSeq := seq
 
-			if err := writeUartMessage(sp, &pb.UartMessage{
-				Type: pb.MessageType_OTA_PAYLOAD,
-				Payload: &pb.UartMessage_OtaPayload{
-					OtaPayload: &pb.OtaPayload{Seq: seq, Data: chunk},
-				},
-			}, false); err != nil {
-				notify("error", "", 0, err.Error())
-				return err
-			}
-			seq++
-			offset += n
-			bytesInBlock += n
+		sendBlock := func() (fullBlock bool, err error) {
+			bytesInBlock := 0
+			for bytesInBlock < otaFlashBlockSize && offset < imageSize {
+				n := otaHostChunkSize
+				room := otaFlashBlockSize - bytesInBlock
+				if n > room {
+					n = room
+				}
+				if offset+n > imageSize {
+					n = imageSize - offset
+				}
+				chunk := firmware[offset : offset+n]
 
-			pct := offset * 100 / imageSize
-			if pct > 99 {
-				pct = 99
+				if err := t.writeMsg(&pb.UartMessage{
+					Type: pb.MessageType_OTA_PAYLOAD,
+					Payload: &pb.UartMessage_OtaPayload{
+						OtaPayload: &pb.OtaPayload{Seq: seq, Data: chunk},
+					},
+				}); err != nil {
+					return false, err
+				}
+				time.Sleep(pace)
+				seq++
+				offset += n
+				bytesInBlock += n
+
+				pct := offset * 100 / imageSize
+				if pct > 99 {
+					pct = 99
+				}
+				notify("uploading", otaStepMaster, pct,
+					fmt.Sprintf("Master: %d / %d bytes", offset, imageSize))
 			}
-			notify("uploading", otaStepMaster, pct, fmt.Sprintf("Master: %d / %d bytes", offset, imageSize))
+			return bytesInBlock == otaFlashBlockSize, nil
 		}
 
-		if bytesInBlock == otaFlashBlockSize {
-			st, err := waitOtaStatus(sp, otaStBlockAck, otaDefaultTimeout, nil)
-			if err != nil {
-				notify("error", "", 0, err.Error())
-				return err
-			}
-			pct := offset * 100 / imageSize
-			if pct > 99 {
-				pct = 99
-			}
-			notify("uploading", otaStepMaster, pct,
-				fmt.Sprintf("Master: Block geschrieben (%d bytes)", st.GetBytesWritten()),
-				OTAProgress{Bytes: st.GetBytesWritten()})
+		fullBlock, err := sendBlock()
+		if err != nil {
+			notify("error", "", 0, err.Error())
+			return err
 		}
+
+		if !fullBlock {
+			continue
+		}
+
+		var st *pb.OtaStatusPayload
+		var ackErr error
+		for attempt := 0; attempt < otaBlockMaxRetries; attempt++ {
+			if attempt > 0 {
+				offset = blockStart
+				seq = blockStartSeq
+				if _, err := sendBlock(); err != nil {
+					notify("error", "", 0, err.Error())
+					return err
+				}
+			}
+			st, ackErr = waitOtaStatus(t, otaStBlockAck, otaDefaultTimeout, nil)
+			if ackErr == nil {
+				break
+			}
+		}
+		if ackErr != nil {
+			notify("error", "", 0, ackErr.Error())
+			return ackErr
+		}
+
+		pct := offset * 100 / imageSize
+		if pct > 99 {
+			pct = 99
+		}
+		notify("uploading", otaStepMaster, pct,
+			fmt.Sprintf("Master: Block geschrieben (%d bytes)", st.GetBytesWritten()),
+			OTAProgress{Bytes: st.GetBytesWritten()})
 	}
 
 	masterPct = 100
-	masterMsg = "Master: UART-Upload abgeschlossen"
+	masterMsg = "Master: Upload abgeschlossen"
 	notify("uploading", otaStepMaster, 100, masterMsg)
 
-	if err := writeUartMessage(sp, &pb.UartMessage{
+	if err := t.writeMsg(&pb.UartMessage{
 		Type: pb.MessageType_OTA_END,
 		Payload: &pb.UartMessage_OtaEnd{
 			OtaEnd: &pb.OtaEndPayload{},
 		},
-	}, false); err != nil {
+	}); err != nil {
 		notify("error", "", 0, err.Error())
 		return err
 	}
@@ -253,7 +336,8 @@ func runOTAOnPortUnlocked(m *managedSerial, firmware []byte, onProgress otaProgr
 			}
 		}
 		if slaveCount == 0 {
-			return "Keine verfügbaren Slaves — Verteilung übersprungen", 0, 0
+			// Do not claim "skipped" mid-flight — details often arrive after the first query.
+			return "ESP-NOW: warte auf Slave-Fortschritt…", 0, 0
 		}
 		return fmt.Sprintf("ESP-NOW: %d / %d bytes (%d Slaves)",
 			aggBytes, imageSize, slaveCount), aggBytes, slaveCount
@@ -273,7 +357,7 @@ func runOTAOnPortUnlocked(m *managedSerial, firmware []byte, onProgress otaProgr
 			return
 		}
 		lastQuery = time.Now()
-		prog, err := queryOtaSlaveProgressLocked(sp, 0, onDistStatus, otaDistQueryTimeout)
+		prog, err := queryOtaSlaveProgress(t, 0, onDistStatus, otaDistQueryTimeout)
 		if err != nil {
 			if len(slaveDetails) > 0 {
 				emitSlaveThrottled(true)
@@ -295,17 +379,17 @@ func runOTAOnPortUnlocked(m *managedSerial, firmware []byte, onProgress otaProgr
 
 	lastQuery = time.Time{} // first query immediately when distribution starts
 	querySlaveProgress()
-	st, err := waitOtaComplete(sp, otaDistTimeout, pushSlaveDist, onWaitTick, otaDistReadTimeout)
+	st, err := waitOtaComplete(t, otaDistTimeout, pushSlaveDist, onWaitTick, otaDistReadTimeout)
 	if err != nil {
 		notify("error", "", 0, err.Error())
 		return err
 	}
 
-	if prog, err := queryOtaSlaveProgressLocked(sp, 0, nil, otaDistQueryTimeout); err == nil {
+	if prog, err := queryOtaSlaveProgress(t, 0, nil, otaDistQueryTimeout); err == nil {
 		mergeSlaveProgressResponse(prog, slaveBytes, slaveDetails)
 	}
 	notify("done", "", 100,
-		fmt.Sprintf("Fertig — %d bytes, Boot-Slot %d. Master und Slaves neu starten.",
+		fmt.Sprintf("Fertig — %d bytes, Boot-Slot %d. Geräte starten neu auf die neue Firmware.",
 			st.GetBytesWritten(), st.GetTargetSlot()),
 		OTAProgress{
 			Bytes: st.GetBytesWritten(), Slot: st.GetTargetSlot(),
@@ -317,13 +401,11 @@ func runOTAOnPortUnlocked(m *managedSerial, firmware []byte, onProgress otaProgr
 }
 
 // QueryOtaSlaveProgress queries the master for per-slave ESP-NOW OTA progress.
-func QueryOtaSlaveProgress(sp *serialPort, clientID uint32) (*pb.OtaSlaveProgressResponse, error) {
-	sp.mu.Lock()
-	defer sp.mu.Unlock()
-	return queryOtaSlaveProgressLocked(sp, clientID, nil, otaDefaultTimeout)
+func QueryOtaSlaveProgress(t otaTransport, clientID uint32) (*pb.OtaSlaveProgressResponse, error) {
+	return queryOtaSlaveProgress(t, clientID, nil, otaDefaultTimeout)
 }
 
-func queryOtaSlaveProgressLocked(sp *serialPort, clientID uint32,
+func queryOtaSlaveProgress(t otaTransport, clientID uint32,
 	onStatus func(*pb.OtaStatusPayload), queryTimeout time.Duration) (*pb.OtaSlaveProgressResponse, error) {
 	req := &pb.UartMessage{
 		Type: pb.MessageType_OTA_SLAVE_PROGRESS,
@@ -333,14 +415,14 @@ func queryOtaSlaveProgressLocked(sp *serialPort, clientID uint32,
 			},
 		},
 	}
-	if err := writeUartMessage(sp, req, false); err != nil {
+	if err := t.writeMsg(req); err != nil {
 		return nil, err
 	}
 	if queryTimeout <= 0 {
 		queryTimeout = otaDefaultTimeout
 	}
 	deadline := time.Now().Add(queryTimeout)
-	msg, err := readUartMessageUntil(sp, deadline, pb.MessageType_OTA_SLAVE_PROGRESS, onStatus, otaDistReadTimeout)
+	msg, err := readUartMessageUntil(t, deadline, pb.MessageType_OTA_SLAVE_PROGRESS, onStatus, otaDistReadTimeout)
 	if err != nil {
 		return nil, err
 	}
@@ -373,7 +455,7 @@ func applyDistributingOtaStatus(st *pb.OtaStatusPayload, imageSize int,
 	details[id] = d
 }
 
-func readUartMessageUntil(sp *serialPort, deadline time.Time, want pb.MessageType,
+func readUartMessageUntil(t otaTransport, deadline time.Time, want pb.MessageType,
 	onStatus func(*pb.OtaStatusPayload), readChunk time.Duration) (*pb.UartMessage, error) {
 	if readChunk <= 0 {
 		readChunk = otaStatusPollTimeout
@@ -386,10 +468,7 @@ func readUartMessageUntil(sp *serialPort, deadline time.Time, want pb.MessageTyp
 		if wait > readChunk {
 			wait = readChunk
 		}
-		if err := sp.port.SetReadTimeout(wait); err != nil {
-			return nil, err
-		}
-		payload, err := uartframe.ReadFrame(sp.port, nil)
+		payload, err := t.readFrame(wait)
 		if err != nil {
 			return nil, err
 		}
@@ -444,7 +523,7 @@ func copySlaveMap(m map[uint32]uint32) map[uint32]uint32 {
 	return out
 }
 
-func waitOtaComplete(sp *serialPort, timeout time.Duration,
+func waitOtaComplete(t otaTransport, timeout time.Duration,
 	onDistributing func(*pb.OtaStatusPayload), onInterval func(),
 	readTimeout time.Duration) (*pb.OtaStatusPayload, error) {
 	if readTimeout <= 0 {
@@ -459,10 +538,7 @@ func waitOtaComplete(sp *serialPort, timeout time.Duration,
 		if readWait > readTimeout {
 			readWait = readTimeout
 		}
-		if err := sp.port.SetReadTimeout(readWait); err != nil {
-			return nil, err
-		}
-		st, err := readOtaStatus(sp)
+		st, err := readOtaStatus(t, readWait)
 		if err != nil {
 			if onInterval != nil {
 				onInterval()
@@ -487,30 +563,27 @@ func waitOtaComplete(sp *serialPort, timeout time.Duration,
 	}
 }
 
-func writeUartMessage(sp *serialPort, msg *pb.UartMessage, logFrame bool) error {
-	frame, err := encodeUartMessage(msg)
-	if err != nil {
-		return err
-	}
-	if logFrame {
-		log.Printf("sending %s (%d frame bytes)", msg.Type, len(frame))
-	}
-	_, err = sp.port.Write(frame)
-	return err
-}
-
-func waitOtaStatus(sp *serialPort, want uint32, timeout time.Duration, onPreparing func(string)) (*pb.OtaStatusPayload, error) {
+func waitOtaStatus(t otaTransport, want uint32, timeout time.Duration, onPreparing func(string)) (*pb.OtaStatusPayload, error) {
 	deadline := time.Now().Add(timeout)
 	for {
 		if time.Now().After(deadline) {
 			return nil, fmt.Errorf("timeout waiting for OTA status %d", want)
 		}
-		if err := sp.port.SetReadTimeout(time.Until(deadline)); err != nil {
-			return nil, err
+		readWait := time.Until(deadline)
+		if readWait > otaStatusPollTimeout {
+			readWait = otaStatusPollTimeout
 		}
-		st, err := readOtaStatus(sp)
+		payload, err := t.readFrame(readWait)
 		if err != nil {
-			return nil, err
+			continue
+		}
+		msg, err := decodeUartPayload(payload)
+		if err != nil || msg.GetType() != pb.MessageType_OTA_STATUS {
+			continue
+		}
+		st := msg.GetOtaStatus()
+		if st == nil {
+			continue
 		}
 		switch st.GetStatus() {
 		case want:
@@ -525,8 +598,8 @@ func waitOtaStatus(sp *serialPort, want uint32, timeout time.Duration, onPrepari
 	}
 }
 
-func readOtaStatus(sp *serialPort) (*pb.OtaStatusPayload, error) {
-	payload, err := uartframe.ReadFrame(sp.port, nil)
+func readOtaStatus(t otaTransport, timeout time.Duration) (*pb.OtaStatusPayload, error) {
+	payload, err := t.readFrame(timeout)
 	if err != nil {
 		return nil, fmt.Errorf("read response: %w", err)
 	}
@@ -564,3 +637,38 @@ func decodeUartPayload(payload []byte) (*pb.UartMessage, error) {
 	msg.Type = pb.MessageType(payload[0])
 	return &msg, nil
 }
+
+// --- UART otaTransport ---
+
+func (sp *serialPort) writeMsg(msg *pb.UartMessage) error {
+	frame, err := encodeUartMessage(msg)
+	if err != nil {
+		return err
+	}
+	_, err = sp.port.Write(frame)
+	return err
+}
+
+func (sp *serialPort) readFrame(timeout time.Duration) ([]byte, error) {
+	if err := sp.port.SetReadTimeout(timeout); err != nil {
+		return nil, err
+	}
+	return uartframe.ReadFrame(sp.port, nil, timeout)
+}
+
+func (sp *serialPort) flushInput() {
+	if sp == nil {
+		return
+	}
+	_ = sp.port.SetReadTimeout(10 * time.Millisecond)
+	buf := make([]byte, 256)
+	deadline := time.Now().Add(50 * time.Millisecond)
+	for time.Now().Before(deadline) {
+		n, err := sp.port.Read(buf)
+		if n == 0 || err != nil {
+			return
+		}
+	}
+}
+
+func (sp *serialPort) chunkPace() time.Duration { return otaHostChunkPaceUART }

goTool/serial_link.go

@@ -1,163 +1,12 @@
 package main
 
-import (
-	"errors"
-	"fmt"
-	"log"
-	"sync"
-	"time"
-)
+import "errors"
 
 // errUARTBusy is returned when the port is held for OTA (poller should not treat as unplug).
 var errUARTBusy = errors.New("uart busy (OTA in progress)")
 
-// managedSerial keeps the UART open and reconnects after I/O failures or unplug.
-type managedSerial struct {
-	portName string
-	baud     int
-	quiet    bool
+// errOTAInProgress is returned when a second OTA upload is attempted while one is running.
+var errOTAInProgress = errors.New("OTA upload already in progress")
 
-	mu sync.Mutex
-	sp *serialPort
-}
-
-func newManagedSerial(portName string, baud int) *managedSerial {
-	return &managedSerial{
-		portName: portName,
-		baud:     baud,
-	}
-}
-
-func (m *managedSerial) Close() error {
-	m.mu.Lock()
-	defer m.mu.Unlock()
-	return m.closeLocked()
-}
-
-func (m *managedSerial) IsConnected() bool {
-	m.mu.Lock()
-	defer m.mu.Unlock()
-	return m.sp != nil
-}
-
-func (m *managedSerial) openLocked() error {
-	sp, err := openSerial(m.portName, m.baud)
-	if err != nil {
-		return err
-	}
-	sp.quiet = m.quiet
-	m.sp = sp
-	if !m.quiet {
-		log.Printf("UART %s connected (%d baud)", m.portName, m.baud)
-	}
-	return nil
-}
-
-func (m *managedSerial) closeLocked() error {
-	if m.sp == nil {
-		return nil
-	}
-	err := m.sp.port.Close()
-	m.sp = nil
-	return err
-}
-
-func (m *managedSerial) invalidateLocked(reason error) {
-	if m.sp == nil {
-		return
-	}
-	if !m.quiet {
-		log.Printf("UART %s disconnected: %v", m.portName, reason)
-	}
-	_ = m.closeLocked()
-}
-
-func (m *managedSerial) withPort(fn func(*serialPort) error) error {
-	return m.withPortLocked(false, fn)
-}
-
-// withPortPoll is like withPort but returns errUARTBusy instead of blocking during OTA.
-func (m *managedSerial) withPortPoll(fn func(*serialPort) error) error {
-	return m.withPortLocked(true, fn)
-}
-
-func (m *managedSerial) withPortLocked(try bool, fn func(*serialPort) error) error {
-	if try {
-		if !m.mu.TryLock() {
-			return errUARTBusy
-		}
-	} else {
-		m.mu.Lock()
-	}
-	defer m.mu.Unlock()
-
-	if m.sp == nil {
-		if err := m.openLocked(); err != nil {
-			return fmt.Errorf("%s: %w", m.portName, err)
-		}
-	}
-
-	err := fn(m.sp)
-	if err != nil {
-		m.invalidateLocked(err)
-	}
-	return err
-}
-
-func (m *managedSerial) exchangePayload(payload []byte, cmdName string) ([]byte, error) {
-	return m.exchangePayloadVia(m.withPort, payload, cmdName)
-}
-
-func (m *managedSerial) exchangePayloadPoll(payload []byte, cmdName string) ([]byte, error) {
-	return m.exchangePayloadVia(m.withPortPoll, payload, cmdName)
-}
-
-func (m *managedSerial) exchangePayloadVia(
-	portFn func(func(*serialPort) error) error,
-	payload []byte, cmdName string,
-) ([]byte, error) {
-	var resp []byte
-	err := portFn(func(sp *serialPort) error {
-		var e error
-		resp, e = sp.exchangePayloadLocked(payload, cmdName)
-		return e
-	})
-	return resp, err
-}
-
-func (m *managedSerial) exchange(cmdID byte, cmdName string) ([]byte, error) {
-	return m.exchangeVia(m.withPort, cmdID, cmdName)
-}
-
-func (m *managedSerial) exchangePoll(cmdID byte, cmdName string) ([]byte, error) {
-	return m.exchangeVia(m.withPortPoll, cmdID, cmdName)
-}
-
-func (m *managedSerial) exchangeVia(
-	portFn func(func(*serialPort) error) error,
-	cmdID byte, cmdName string,
-) ([]byte, error) {
-	var resp []byte
-	err := portFn(func(sp *serialPort) error {
-		var e error
-		resp, e = sp.exchangeLocked(cmdID, cmdName)
-		return e
-	})
-	return resp, err
-}
-
-func disconnectedState(portName string, err error) DashboardState {
-	msg := "UART disconnected"
-	if err != nil {
-		msg = err.Error()
-	}
-	return DashboardState{
-		UpdatedAt:     time.Now().Format(time.RFC3339),
-		SerialPort:    portName,
-		UARTConnected: false,
-		SerialOK:      false,
-		SerialError:   msg,
-		Master:        MasterView{OK: false, Error: msg},
-		Clients:       []ClientView{},
-	}
-}
+// managedSerial is an alias for managedHost (UART-first history).
+type managedSerial = managedHost

goTool/serialport.go

@@ -12,6 +12,9 @@ import (
 
 const readTimeout = 3 * time.Second
 
+// batteryReadTimeout: master may query each slave over ESP-NOW (~400 ms each).
+const batteryReadTimeout = 12 * time.Second
+
 type serialPort struct {
 	port  serial.Port
 	mu    sync.Mutex
@@ -44,10 +47,16 @@ func (s *serialPort) Close() error {
 func (s *serialPort) exchangePayload(payload []byte, cmdName string) ([]byte, error) {
 	s.mu.Lock()
 	defer s.mu.Unlock()
-	return s.exchangePayloadLocked(payload, cmdName)
+	return s.exchangePayloadLocked(payload, cmdName, readTimeout)
 }
 
-func (s *serialPort) exchangePayloadLocked(payload []byte, cmdName string) ([]byte, error) {
+func (s *serialPort) exchangePayloadForBattery(payload []byte, cmdName string) ([]byte, error) {
+	s.mu.Lock()
+	defer s.mu.Unlock()
+	return s.exchangePayloadLocked(payload, cmdName, batteryReadTimeout)
+}
+
+func (s *serialPort) exchangePayloadLocked(payload []byte, cmdName string, timeout time.Duration) ([]byte, error) {
 	if len(payload) == 0 {
 		return nil, fmt.Errorf("empty payload")
 	}
@@ -63,7 +72,15 @@ func (s *serialPort) exchangePayloadLocked(payload []byte, cmdName string) ([]by
 		return nil, fmt.Errorf("write: %w", err)
 	}
 
-	respPayload, err := uartframe.ReadFrame(s.port, nil)
+	if timeout <= 0 {
+		timeout = readTimeout
+	}
+	if err := s.port.SetReadTimeout(timeout); err != nil {
+		return nil, fmt.Errorf("set read timeout: %w", err)
+	}
+	defer func() { _ = s.port.SetReadTimeout(readTimeout) }()
+
+	respPayload, err := uartframe.ReadFrame(s.port, nil, timeout)
 	if err != nil {
 		return nil, fmt.Errorf("read response: %w", err)
 	}
@@ -96,7 +113,7 @@ func (s *serialPort) exchangeLocked(cmdID byte, cmdName string) ([]byte, error)
 		return nil, fmt.Errorf("write: %w", err)
 	}
 
-	payload, err := uartframe.ReadFrame(s.port, nil)
+	payload, err := uartframe.ReadFrame(s.port, nil, readTimeout)
 	if err != nil {
 		return nil, fmt.Errorf("read response: %w", err)
 	}

goTool/shutdown.go

@@ -0,0 +1,75 @@
+package main
+
+import (
+	"context"
+	"log"
+	"net/http"
+	"os"
+	"os/signal"
+	"sync"
+	"syscall"
+	"time"
+)
+
+var (
+	shutdownMu   sync.Mutex
+	shutdownFns  []func()
+	hooksOnce    sync.Once
+	bgHandlerOnce sync.Once
+)
+
+// registerShutdown runs fn on SIGINT/SIGTERM (LIFO order).
+func registerShutdown(fn func()) {
+	shutdownMu.Lock()
+	shutdownFns = append(shutdownFns, fn)
+	shutdownMu.Unlock()
+}
+
+func runShutdownHooks() {
+	hooksOnce.Do(func() {
+		shutdownMu.Lock()
+		fns := shutdownFns
+		shutdownMu.Unlock()
+		for i := len(fns) - 1; i >= 0; i-- {
+			fns[i]()
+		}
+	})
+}
+
+// enableShutdownOnInterrupt listens for SIGINT/SIGTERM in the background and exits
+// after running shutdown hooks. Use for one-shot CLI commands (OTA, etc.).
+func enableShutdownOnInterrupt() {
+	bgHandlerOnce.Do(func() {
+		ch := make(chan os.Signal, 1)
+		signal.Notify(ch, os.Interrupt, syscall.SIGTERM)
+		go func() {
+			sig := <-ch
+			signal.Stop(ch)
+			log.Printf("received %v, shutting down…", sig)
+			runShutdownHooks()
+			os.Exit(0)
+		}()
+	})
+}
+
+// waitForShutdown blocks until SIGINT/SIGTERM, runs hooks, and returns.
+// Use for long-running servers (serve/dashboard).
+func waitForShutdown() {
+	ch := make(chan os.Signal, 1)
+	signal.Notify(ch, os.Interrupt, syscall.SIGTERM)
+	sig := <-ch
+	signal.Stop(ch)
+	log.Printf("received %v, shutting down…", sig)
+	runShutdownHooks()
+}
+
+func shutdownHTTPServer(srv *http.Server) {
+	if srv == nil {
+		return
+	}
+	ctx, cancel := context.WithTimeout(context.Background(), 2*time.Second)
+	defer cancel()
+	if err := srv.Shutdown(ctx); err != nil {
+		log.Printf("HTTP shutdown: %v", err)
+	}
+}

goTool/tap_notify_ctl.go

@@ -0,0 +1,50 @@
+package main
+
+import "sync"
+
+// tapNotifyCtl tracks which slaves have tap notify enabled (mirrors firmware / dashboard).
+type tapNotifyCtl struct {
+	mu    sync.Mutex
+	flags map[uint32]tapNotifyFlags
+}
+
+type tapNotifyFlags struct {
+	single    bool
+	doubleTap bool
+	triple    bool
+}
+
+func newTapNotifyCtl() *tapNotifyCtl {
+	return &tapNotifyCtl{flags: make(map[uint32]tapNotifyFlags)}
+}
+
+func (c *tapNotifyCtl) Set(clientID uint32, single, doubleTap, triple bool) {
+	c.mu.Lock()
+	defer c.mu.Unlock()
+	if !single && !doubleTap && !triple {
+		delete(c.flags, clientID)
+		return
+	}
+	c.flags[clientID] = tapNotifyFlags{single: single, doubleTap: doubleTap, triple: triple}
+}
+
+func (c *tapNotifyCtl) Any() bool {
+	c.mu.Lock()
+	defer c.mu.Unlock()
+	return len(c.flags) > 0
+}
+
+func (c *tapNotifyCtl) SyncFromClients(clients []ClientView) {
+	c.mu.Lock()
+	defer c.mu.Unlock()
+	c.flags = make(map[uint32]tapNotifyFlags)
+	for _, cl := range clients {
+		if cl.TapNotifySingle || cl.TapNotifyDouble || cl.TapNotifyTriple {
+			c.flags[cl.ID] = tapNotifyFlags{
+				single:    cl.TapNotifySingle,
+				doubleTap: cl.TapNotifyDouble,
+				triple:    cl.TapNotifyTriple,
+			}
+		}
+	}
+}

goTool/testdata/README.md

@@ -44,6 +44,19 @@ Ordered steps: UART commands, delays, or esptool reset.
 **unicast_test** — `input`: `slave` or `client_id`, `seq`  
 `expect`: `success`, `seq`
 
+**led_ring** — `input`: `mode` (`clear`, `progress`, `digit`, `blink`, `find_me`, `battery_low`), `progress`, `digit`, `r`/`g`/`b`, `intensity`, `blink_ms`, `blink_count`  
+`expect`: `success`, `mode`, `progress`, `digit`
+
+**find_me** — `input`: `client` / `client_id` or `slave` (`0` = master ring)  
+`expect`: `success`
+
+**restart** — `input`: `client` / `client_id` or `slave` (prefer slave in tests so UART stays up)  
+`expect`: `success`
+
+**ota_progress** — query `OTA_SLAVE_PROGRESS` (no firmware upload)  
+`input`: optional `client_id` / `slave`  
+`expect`: `active` (typically `false` when idle)
+
 **reset** — esptool hard-reset via console port from bench config (no `expect`).  
 `input`: `target` (`master`) or `slave` (`pod-1`), or `all: true`; optional `wait_ms` after each reset (default 2000).
 
@@ -56,13 +69,19 @@ Example reset steps:
 
 Requires `python -m esptool` or `esptool.py` on PATH (ESP-IDF).
 
-The `smoke` scenario resets every node with a configured `console` port, waits **10 s** for boot and ESP-NOW join, then runs the UART checks.
+The `smoke` scenario resets every node with a configured `console` port, waits **10 s** for boot and ESP-NOW join, then runs a short UART smoke test.
+
+The **`uart_cmds`** scenario covers all implemented UART commands **except OTA upload** (`OTA_START` / `OTA_PAYLOAD` / `OTA_END` / `OTA_START_ESPNOW`). It ends with a slave **restart** (master UART stays connected).
+
+`CLIENT_INPUT` is not tested (not implemented in firmware).
 
 ### Example
 
 ```bash
 cd goTool
 go run . test -config example-lab -scenario smoke
+go run . test -config example-lab -scenario uart_cmds
 go run . test -config my-lab -scenario smoke -port /dev/ttyUSB1
 go run . test -list-configs
+go run . test -list-scenarios
 ```

goTool/testdata/configs/example-lab.json

@@ -12,7 +12,7 @@
     {
       "id": "pod-1",
       "mac": "50:78:7d:18:01:10",
-      "client_id": 16,
+      "client_id": 1,
       "console": "/dev/ttyACM1"
     }
   ]

goTool/testdata/scenarios/uart_cmds.json

@@ -0,0 +1,107 @@
+{
+  "id": "uart_cmds",
+  "description": "All implemented UART commands (no OTA upload). Resets bench, joins ESP-NOW, exercises each cmd; restarts slave at end.",
+  "config": "example-lab",
+  "steps": [
+    {
+      "name": "reset all nodes",
+      "command": "reset",
+      "input": { "all": true, "wait_ms": 2500 }
+    },
+    {
+      "name": "boot and ESP-NOW join",
+      "delay_ms": 10000
+    },
+    {
+      "name": "VERSION",
+      "command": "version",
+      "expect": { "version_min": 1 }
+    },
+    {
+      "name": "CLIENT_INFO",
+      "command": "clients",
+      "expect": {
+        "min_clients": 1,
+        "slave": "pod-1",
+        "available": true
+      }
+    },
+    {
+      "name": "ACCEL_DEADZONE read master",
+      "command": "deadzone",
+      "input": { "write": false, "client": 0 },
+      "expect": { "success": true }
+    },
+    {
+      "name": "ACCEL_DEADZONE write master",
+      "command": "deadzone",
+      "input": { "write": true, "client": 0, "value": 120 },
+      "expect": { "success": true, "deadzone": 120 }
+    },
+    {
+      "name": "ACCEL_DEADZONE read master after write",
+      "command": "deadzone",
+      "input": { "write": false, "client": 0 },
+      "expect": { "success": true, "deadzone": 120 }
+    },
+    {
+      "name": "LED_RING clear",
+      "command": "led_ring",
+      "input": { "mode": "clear" },
+      "expect": { "success": true, "mode": 0 }
+    },
+    {
+      "name": "LED_RING progress",
+      "command": "led_ring",
+      "input": { "mode": "progress", "progress": 40, "g": 200 },
+      "expect": { "success": true, "mode": 1, "progress": 40 }
+    },
+    {
+      "name": "LED_RING digit",
+      "command": "led_ring",
+      "input": { "mode": "digit", "digit": 3, "r": 255 },
+      "expect": { "success": true, "mode": 2, "digit": 3 }
+    },
+    {
+      "name": "LED_RING blink",
+      "command": "led_ring",
+      "input": { "mode": "blink", "r": 0, "g": 255, "b": 0, "blink_count": 1 },
+      "expect": { "success": true, "mode": 3 }
+    },
+    {
+      "name": "ESPNOW_UNICAST_TEST",
+      "command": "unicast_test",
+      "input": { "slave": "pod-1", "seq": 99 },
+      "expect": { "success": true, "seq": 99 }
+    },
+    {
+      "name": "FIND_ME master",
+      "command": "find_me",
+      "input": { "client": 0 },
+      "expect": { "success": true }
+    },
+    {
+      "name": "FIND_ME slave",
+      "command": "find_me",
+      "input": { "slave": "pod-1" },
+      "expect": { "success": true }
+    },
+    {
+      "name": "ACCEL_DEADZONE push to slave",
+      "command": "deadzone",
+      "input": { "write": true, "slave": "pod-1", "value": 110 },
+      "expect": { "success": true }
+    },
+    {
+      "name": "OTA_SLAVE_PROGRESS idle",
+      "command": "ota_progress",
+      "expect": { "active": false }
+    },
+    {
+      "name": "RESTART slave (last)",
+      "command": "restart",
+      "input": { "slave": "pod-1" },
+      "expect": { "success": true }
+    }
+  ]
+}

goTool/uart/frame.go

@@ -4,12 +4,16 @@ import (
 	"errors"
 	"fmt"
 	"io"
+	"time"
 )
 
 const (
 	StartMarker = 0xAA
 	StopMarker  = 0xCC
-	MaxPayload  = 252
+	// Must match main/uart.h MAX_PAYLOAD_SIZE.
+	MaxPayload = 1024
+	// AA | len_lo | len_hi | payload | xor | CC
+	FrameOverhead = 5
 )
 
 var (
@@ -17,14 +21,15 @@ var (
 	ErrTimeout      = errors.New("read timeout")
 )
 
-// EncodeFrame builds a framed packet: 0xAA len payload xor(payload) 0xCC.
+// EncodeFrame builds a framed packet: 0xAA len_lo len_hi payload xor(payload) 0xCC.
 func EncodeFrame(payload []byte) ([]byte, error) {
 	if len(payload) == 0 || len(payload) > MaxPayload {
 		return nil, fmt.Errorf("payload length %d out of range 1..%d", len(payload), MaxPayload)
 	}
 
-	frame := make([]byte, 0, 4+len(payload))
-	frame = append(frame, StartMarker, byte(len(payload)))
+	n := len(payload)
+	frame := make([]byte, 0, FrameOverhead+n)
+	frame = append(frame, StartMarker, byte(n&0xff), byte((n>>8)&0xff))
 	var checksum byte
 	for _, b := range payload {
 		frame = append(frame, b)
@@ -37,6 +42,7 @@ func EncodeFrame(payload []byte) ([]byte, error) {
 type Parser struct {
 	state    int
 	len      int
+	lenLo    byte
 	payload  []byte
 	index    int
 	checksum byte
@@ -44,7 +50,8 @@ type Parser struct {
 
 const (
 	stateStart = iota
-	stateLen
+	stateLenLo
+	stateLenHi
 	stateData
 	stateChecksum
 	stateStop
@@ -61,14 +68,19 @@ func (p *Parser) Feed(b byte) (payload []byte, ok bool, err error) {
 		if b == StartMarker {
 			p.index = 0
 			p.checksum = 0
-			p.state = stateLen
+			p.state = stateLenLo
 		}
-	case stateLen:
-		if b == 0 || b > MaxPayload {
+	case stateLenLo:
+		p.lenLo = b
+		p.state = stateLenHi
+	case stateLenHi:
+		n := int(p.lenLo) | (int(b) << 8)
+		if n == 0 || n > MaxPayload {
 			p.state = stateStart
 		} else {
-			p.len = int(b)
+			p.len = n
 			p.payload = make([]byte, p.len)
+			p.index = 0
 			p.state = stateData
 		}
 	case stateData:
@@ -97,13 +109,22 @@ func (p *Parser) Feed(b byte) (payload []byte, ok bool, err error) {
 }
 
 // ReadFrame reads bytes from r until one full frame is parsed or an error occurs.
-func ReadFrame(r io.Reader, buf []byte) ([]byte, error) {
+// maxWait bounds total wait time; zero means no limit (serial read timeouts retry forever).
+func ReadFrame(r io.Reader, buf []byte, maxWait time.Duration) ([]byte, error) {
 	if buf == nil {
-		buf = make([]byte, 256)
+		buf = make([]byte, 1024)
 	}
 	parser := NewParser()
 
+	var deadline time.Time
+	if maxWait > 0 {
+		deadline = time.Now().Add(maxWait)
+	}
+
 	for {
+		if !deadline.IsZero() && !time.Now().Before(deadline) {
+			return nil, ErrTimeout
+		}
 		n, err := r.Read(buf)
 		if n > 0 {
 			for i := 0; i < n; i++ {

main/CMakeLists.txt

@@ -12,23 +12,46 @@ idf_component_register(
   "powerpod.c"
   "led_ring.c"
   "uart.c"
+  "host_transport.c"
+  "ble_host.c"
+  "ble_stream.c"
   "uart_proto.c"
   "uart_cmd.c"
-  "cmd_handler.c"
-  "cmd_version.c"
-  "cmd_client_info.c"
-  "cmd_accel_deadzone.c"
-  "cmd_espnow_unicast_test.c"
-  "cmd_led_ring.c"
-  "cmd_ota.c"
-  "cmd_ota_slave_progress.c"
+  "cmd/cmd_handler.c"
+  "cmd/cmd_version.c"
+  "cmd/cmd_client_info.c"
+  "cmd/cmd_accel_deadzone.c"
+  "cmd/cmd_accel_stream.c"
+  "cmd/cmd_input_send_mode.c"
+  "cmd/cmd_tap_notify.c"
+  "cmd/cmd_tap_config.c"
+  "cmd/cmd_cache_status.c"
+  "cmd/cmd_espnow_unicast_test.c"
+  "cmd/cmd_espnow_echo_ping.c"
+  "cmd/cmd_espnow_find_me.c"
+  "cmd/cmd_restart.c"
+  "cmd/cmd_client_id_map_reset.c"
+  "pod_reboot.c"
+  "cmd/cmd_led_ring.c"
+  "cmd/cmd_battery.c"
+  "cmd/cmd_battery_uv.c"
+  "cmd/cmd_set_log_level.c"
+  "cmd/cmd_ota.c"
+  "cmd/cmd_ota_slave_progress.c"
   "ota_uart.c"
   "ota_espnow.c"
+  "ota_session.c"
+  "ota_confirm.c"
   "client_registry.c"
   "esp_now_comm.c"
+  "esp_now_core.c"
+  "esp_now_master.c"
+  "esp_now_slave.c"
   "esp_now_proto.c"
   "bosch456.c"
   "board_input.c"
+  "battery_uv.c"
+  "pod_settings.c"
   "proto/uart_messages.pb.c"
   "proto/esp_now_messages.pb.c"
   "proto/pb_encode.c"
@@ -36,19 +59,24 @@ idf_component_register(
   "proto/pb_common.c"
   INCLUDE_DIRS
   "."
+  "cmd"
   "proto"
   REQUIRES
   esp_wifi
   esp_netif
   esp_event
   nvs_flash
+  bt
   PRIV_REQUIRES
   esp_driver_gpio
   esp_driver_uart
   esp_driver_i2c
   esp_adc
   app_update
+  esp_timer
   bma456)
 
 target_compile_definitions(${COMPONENT_LIB}
                            PRIVATE "POWERPOD_GIT_HASH=\"${POWERPOD_GIT_HASH}\"")
+# Optional: disable software UV protection
+# target_compile_definitions(${COMPONENT_LIB} PRIVATE POWERPOD_BATTERY_UV_ENABLE=0)

main/README.md

@@ -2,6 +2,8 @@
 
 ESP32-S3 firmware for Powerpod nodes. Master and slave devices run the **same binary**; role and ESP-NOW network are selected at boot via DIP switches and an I2C IO expander.
 
+**Architektur & ESP-only Doku (ohne goTool):** [`../docs/ARCHITECTURE.md`](../docs/ARCHITECTURE.md) (Datenflüsse UART/Commands/ESP-NOW), [`../docs/DOCUMENTATION.md`](../docs/DOCUMENTATION.md) (vollständige Referenz).
+
 ## System overview
 
 ```
@@ -53,18 +55,20 @@ Pins (`powerpod.h`):
 | BMA456 INT | 10 |
 | Button (Taster) | 12 |
 | LiPo sense 1 (ADC) | 1 |
-| LiPo sense 2 (ADC) | 12 (skipped if same as button) |
+| LiPo sense 2 (ADC) | 11 |
 
 > **TODO:** GPIO assignments above are provisional; confirm pinning against the real board before release.
 
-Startup order:
+Startup order (normal path; UV energy-save skips I2C/BMA456/ESP-NOW/UART/button — see **Software UV protection**):
 
-1. Read DIP + IO expander → `app_config`
-2. **I2C bus** — IO expander `0x20`; optional **BMA456H** (`init_bma456`, same bus)
-3. `esp_now_comm_init(&app_config)` — WiFi + ESP-NOW
-4. `led_ring_init()`
-5. `board_input_init()` — button press logs, LiPo ADC logs every **10 s**
-6. **Master only:** command queue, UART, registered commands (e.g. VERSION)
+1. `pod_settings_init()` — NVS
+2. LiPo ADC init + optional UV boot check (`battery_uv.c`)
+3. Read DIP + IO expander → `app_config`
+4. **I2C bus** — IO expander `0x20`; optional **BMA456H** (`init_bma456`, same bus)
+5. `esp_now_comm_init(&app_config)` — WiFi + ESP-NOW
+6. `led_ring_init()`
+7. LiPo monitor task + button (`board_input.c`)
+8. **Master only:** command queue, UART, registered commands (e.g. VERSION)
 
 ## BMA456 accelerometer (`bosch456.c`)
 
@@ -82,12 +86,18 @@ Powerpod uses the Bosch **BMA456H** (hearable) variant, not the generic `bma456w
 
 **Accel logging:** Samples are printed only when any axis changes by more than the **deadzone** (raw LSB) since the last logged sample (default **100**). This is a **software** filter on top of the sensor; it does not change BMA456 hardware thresholds.
 
+**Persistence:** The local deadzone is stored in the **`nvs`** partition (namespace `powerpod`, key `accel_dz`) via `pod_settings.c`. Each node (master or slave) keeps its own value across reboot. Loaded at boot after `init_bma456()`; saved when set locally (UART `client_id = 0`, `all_clients` on master, or ESP-NOW deadzone on a slave).
+
+Tap detection parameters (`bma456_tap_config_t`) use the same pattern with NVS key `tap_cfg` (blob), UART `TAP_CONFIG`, and ESP-NOW `ESPNOW_SET_TAP_CONFIG`.
+
 **Configuration paths:**
 
 | Path | Effect |
 |------|--------|
-| UART `ACCEL_DEADZONE` with `client_id = 0` | `bma456_set_accel_deadzone()` on the local node |
-| ESP-NOW `SET_ACCEL_DEADZONE` | Same on a slave (no-op log path if sensor not installed) |
+| UART `ACCEL_DEADZONE` with `client_id = 0` | Set + save local deadzone |
+| ESP-NOW `SET_ACCEL_DEADZONE` | Set + save on the receiving slave |
+| UART `TAP_CONFIG` with `client_id = 0` | Set + save local tap config |
+| ESP-NOW `SET_TAP_CONFIG` | Set + save tap config on the receiving slave |
 | `make gotool-deadzone-set DEADZONE=… CLIENT=0` | Host shortcut for local deadzone |
 
 **Logs:** `[BMA456] ACC X=… Y=… Z=…` when deadzone exceeded; `[BMA456] tap: single|double|triple` on interrupt.
@@ -106,10 +116,20 @@ Schema: `proto/esp_now_messages.proto`. Encode/decode: `esp_now_proto.c`. The ES
 
 | `EspNowMessageType` | Direction | `oneof` payload |
 |---------------------|-----------|-----------------|
-| `ESPNOW_DISCOVER` | Master → broadcast `FF:FF:FF:FF:FF:FF` | `EspNowDiscover` (`network`) |
+| `ESPNOW_DISCOVER` | Master → broadcast `FF:FF:FF:FF:FF:FF` | `EspNowDiscover` (`network`, `master_time_us` for accel TX slot sync) |
 | `ESPNOW_SLAVE_INFO` | Slave → master | `EspNowSlavePresence` |
 | `ESPNOW_HEARTBEAT` | Slave → master | `EspNowSlavePresence` (same fields) |
 | `ESPNOW_SET_ACCEL_DEADZONE` | Master → slave | `EspNowAccelDeadzone` (`deadzone` LSB) |
+| `ESPNOW_SET_TAP_CONFIG` | Master → slave | `EspNowTapConfig` (multitap sens/timing/axis + enable S/D/T) |
+| `ESPNOW_SET_BATTERY_UV` | Master → slave | `EspNowBatteryUv` (runtime UV enable + clear latch when off) |
+| `ESPNOW_UNICAST_TEST` | Master → slave | `EspNowUnicastTest` (`seq`) |
+| `ESPNOW_FIND_ME` | Master → slave | `EspNowFindMe` (`client_id` filter) — LED locate sequence |
+| `ESPNOW_RESTART` | Master → slave | `EspNowRestart` (`client_id` filter) — reboot slave |
+| `ESPNOW_ACCEL_SAMPLE` | Slave → master | `EspNowAccelSample` (`slave_id`, `x`, `y`, `z` raw LSB) — ~every 10 ms in 1 ms slots `offset_ms=(id-1)%8` via Discover sync; TX path via `INPUT_SEND_MODE` |
+| `ESPNOW_SET_INPUT_SEND_MODE` | Master → slave | `EspNowInputSendMode` (`mode` 0..3 = best_effort/fast/wait/reliable) |
+| `ESPNOW_SET_TAP_NOTIFY` | Master → slave | `EspNowTapNotify` (`client_id`, `single`, `double_tap`, `triple`) — which tap kinds to forward |
+| `ESPNOW_TAP_EVENT` | Slave → master | `EspNowTapEvent` (`client_id`, `kind`) — on BMA456 tap interrupt if notify enabled |
+| `ESPNOW_BATTERY_REPORT` | Slave → master | `EspNowBatteryReport` (`client_id`, `lipo1/2` mV) — ~every 30 s; cached in `client_registry` |
 | `ESPNOW_OTA_START` | Master → slave (unicast) | `EspNowOtaStart` (`total_size`) |
 | `ESPNOW_OTA_PAYLOAD` | Master → slave | `EspNowOtaPayload` (`seq`, up to 200 B `data`) |
 | `ESPNOW_OTA_END` | Master → slave | `EspNowOtaEnd` |
@@ -146,7 +166,7 @@ Hardware: **UART1**, **921600** baud, **TX = GPIO3**, **RX = GPIO2** (adapter TX
 | Field | Value |
 |-------|--------|
 | Start | `0xAA` |
-| Length | 1 byte, payload size 1–252 |
+| Length | 2 bytes little-endian, payload size 1–1024 |
 | Payload | `length` bytes |
 | Checksum | XOR of all payload bytes |
 | Stop | `0xCC` |
@@ -158,7 +178,7 @@ Hardware: **UART1**, **921600** baud, **TX = GPIO3**, **RX = GPIO2** (adapter TX
 | 0 | Command ID (`MessageType` / `msg_id`) |
 | 1… | Arguments (handler receives bytes after ID only) |
 
-Example VERSION request: single-byte payload `03` → frame `AA 01 03 03 CC`.
+Example VERSION request: single-byte payload `03` → frame `AA 01 00 03 03 CC`.
 
 Logging:
 
@@ -167,7 +187,7 @@ Logging:
 
 ## Command handler
 
-Generic dispatch for host commands (UART today; `msg_post()` for in-firmware sources later).
+Generic dispatch for host commands over UART only.
 
 ```
 UART  →  generic_msg_t queue  →  vCmdDispatcherTask  →  registered handler
@@ -177,7 +197,8 @@ UART  →  generic_msg_t queue  →  vCmdDispatcherTask  →  registered handler
 |-----|-------------|
 | `init_cmdHandler(queue)` | Start dispatcher task (priority 5) |
 | `msg_register_handler(id, cb)` | Register callback; max 32 handlers |
-| `msg_post(id, data, len)` | Enqueue from firmware (e.g. future ESP-NOW → PC path) |
+
+During an OTA session (`ota_session_busy()`), the dispatcher rejects all UART commands except OTA_* and `OTA_SLAVE_PROGRESS` (see `ota_session.c`).
 
 ```c
 typedef void (*msg_callback_t)(const uint8_t *data, size_t len);
@@ -198,18 +219,29 @@ Host and master speak nanopb-encoded `UartMessage` inside UART frames (byte 0 =
 
 | ID | Name | Status |
 |----|------|--------|
-| 3 | `VERSION` | Implemented (`cmd_version.c`) |
-| 4 | `CLIENT_INFO` | Implemented (`cmd_client_info.c`) — slave list from registry |
+| 3 | `VERSION` | Implemented (`cmd/cmd_version.c`) |
+| 4 | `CLIENT_INFO` | Implemented (`cmd/cmd_client_info.c`) — slave list from registry |
 | 5 | `CLIENT_INPUT` | Planned |
-| 6 | `ACCEL_DEADZONE` | Implemented (`cmd_accel_deadzone.c`) — get/set accel filter LSB |
-| 7 | `ESPNOW_UNICAST_TEST` | Implemented (`cmd_espnow_unicast_test.c`) |
-| 8 | `LED_RING` | Implemented (`cmd_led_ring.c`) — ring progress bar (0–100 %, RGB, intensity) |
-| 16 | `OTA_START` | Implemented (`cmd_ota.c`) — begin UART OTA on inactive slot |
+| 6 | `ACCEL_DEADZONE` | Implemented (`cmd/cmd_accel_deadzone.c`) — get/set accel filter LSB |
+| 7 | `ESPNOW_UNICAST_TEST` | Implemented (`cmd/cmd_espnow_unicast_test.c`) |
+| 8 | `LED_RING` | Implemented (`cmd/cmd_led_ring.c`) — ring progress bar (0–100 %, RGB, intensity) |
+| 26 | `BATTERY_STATUS` | Implemented (`cmd/cmd_battery.c`) — cached LiPo 1/2 per pod from `client_registry` (UART read, no slave round-trip) |
+| 16 | `OTA_START` | Implemented (`cmd/cmd_ota.c`) — begin UART OTA on inactive slot |
 | 17 | `OTA_PAYLOAD` | Implemented — up to 200 B per frame; device buffers 4 KiB |
 | 18 | `OTA_END` | Implemented — flush, `esp_ota_end`, push image to slaves via ESP-NOW, set boot |
 | 19 | `OTA_STATUS` | Device → host (prepare/ready/block ACK/success/failed) |
 | 20 | `OTA_START_ESPNOW` | Implemented — re-distribute staged image to slaves only |
-| 21 | `OTA_SLAVE_PROGRESS` | Implemented (`cmd_ota_slave_progress.c`) — query per-slave ESP-NOW OTA progress |
+| 21 | `OTA_SLAVE_PROGRESS` | Implemented (`cmd/cmd_ota_slave_progress.c`) — query per-slave ESP-NOW OTA progress |
+| 22 | `FIND_ME` | Implemented (`cmd/cmd_espnow_find_me.c`) — `client_id=0` local ring, `>0` ESP-NOW to slave |
+| 23 | `RESTART` | Implemented (`cmd/cmd_restart.c`) — `client_id=0` reboot master, `>0` ESP-NOW reboot slave |
+| 25 | `ACCEL_STREAM` | Implemented — enable/disable slave ESP-NOW accel stream to master |
+| 35 | `INPUT_SEND_MODE` | Implemented — get/set slave accel/tap ESP-NOW send path (best_effort/fast/wait/reliable) |
+| 27 | `TAP_NOTIFY` | Implemented (`cmd/cmd_tap_notify.c`) — get/set which tap kinds notify via ESP-NOW |
+| 29 | `CACHE_STATUS` | Implemented (`cmd/cmd_cache_status.c`) — subscribed accel + tap cache (one UART round-trip) |
+| 30 | `ESPNOW_ECHO_PING` | Implemented (`cmd/cmd_espnow_echo_ping.c`) — ESP-NOW timestamp echo (latency test) |
+| 31 | `SET_LOG_LEVEL` | Implemented (`cmd/cmd_set_log_level.c`) — get/set global `esp_log_level_set("*", …)` on master |
+| 32 | `TAP_CONFIG` | Implemented (`cmd/cmd_tap_config.c`) — get/set BMA456H multitap params (+ NVS) |
+| 36 | `BATTERY_UV` | Implemented (`cmd/cmd_battery_uv.c`) — get/set software UV enable (+ NVS / ESP-NOW) |
 
 Regenerate C code:
 
@@ -257,7 +289,7 @@ During OTA the LED ring shows progress at ~5 % brightness: **blue** while the im
 
 `OTA_START_ESPNOW` (type `20`): re-run ESP-NOW distribution from the last staged image without a new UART upload (no-op if nothing staged).
 
-Implementation: `ota_uart.c` (4 KiB buffer, `esp_ota_write`), `ota_espnow.c`, `cmd_ota.c`.
+Implementation: `ota_uart.c` (4 KiB buffer, `esp_ota_write`), `ota_espnow.c`, `cmd/cmd_ota.c`.
 
 Host upload:
 
@@ -303,6 +335,73 @@ Sets the **software** deadzone used by `bosch456.c` when logging accel (see [BMA
 
 **Response:** `accel_deadzone_response` with applied `deadzone`, `success`, and `slaves_updated` (ESP-NOW count).
 
+### TAP_CONFIG command
+
+Get/set **hardware** BMA456H multitap parameters (`tap_sens_thres`, timing fields, `axis_sel`, enable single/double/triple). Applied via `bma456_set_tap_config()` and persisted in NVS (`tap_cfg`) on each target node.
+
+**Request:** framed `20` (`0x20`) + `tap_config_request`:
+
+| Field | Meaning |
+|-------|---------|
+| `write` | `false` = read, `true` = write |
+| `tap_sens_thres` … `enable_triple` | Same fields as `bma456_tap_config_t` |
+| `client_id` | `0` = local sensor; `>0` = slave id (master) |
+| `all_clients` | Master: ESP-NOW unicast to every registered slave |
+
+**Response:** `tap_config_response` with fields echo, `success`, `slaves_updated`.
+
+```bash
+go run . -port /dev/ttyUSB0 tap-config
+go run . -port /dev/ttyUSB0 tap-config -set -sens 5 -axis 2
+go run . -port /dev/ttyUSB0 tap-config -client 16 -set -sens 7
+```
+
+### TAP_NOTIFY command
+
+Configure which BMA456 tap kinds a **slave** forwards to the master over ESP-NOW. The slave only sends `ESPNOW_TAP_EVENT` when the matching notify flag is enabled (set locally on the slave via ESP-NOW).
+
+**Request:** framed `1b` (`0x1b`) + `tap_notify_request`:
+
+| Field | Meaning |
+|-------|---------|
+| `write` | `false` = read, `true` = write |
+| `single`, `double_tap`, `triple` | Which tap kinds to notify (write) |
+| `client_id` | Slave id (read/write one slave) |
+| `all_clients` | Master: ESP-NOW unicast to every registered slave |
+
+**Response:** `tap_notify_response` (`client_id`, `success`, `slaves_updated`, `single`, `double_tap`, `triple`).
+
+Notify flags are mirrored in `ClientInfo` (`tap_notify_single/double/triple`) for the dashboard.
+
+```bash
+go run . -port /dev/ttyUSB0 tap-notify -client 16 -set -single
+go run . -port /dev/ttyUSB0 tap-notify -client 16
+```
+
+### CACHE_STATUS command
+
+Read **cached** accel and/or tap data on the **master** in one UART round-trip. Slaves send `ESPNOW_ACCEL_SAMPLE` every **8 ms** (best-effort) when streaming; tap events arrive via `ESPNOW_TAP_EVENT` and are held up to **8 ms** (`CLIENT_REGISTRY_TAP_MAX_AGE_MS`). Pending taps are **consumed** on read (like the former `TAP_SNAPSHOT`).
+
+**Request:** framed `1d` (`0x1d`) only — no body (`CacheStatusRequest` empty).
+
+**Response:** `cache_status_response.clients[]` — one entry per slave with `accel_stream_enabled` and/or any tap-notify flag:
+
+| Field | When present |
+|-------|----------------|
+| `client_id` | Always (for listed slaves) |
+| `accel` | Slave has accel stream on (`valid`, `x`/`y`/`z`, `age_ms` when sample fresh) |
+| `tap` | Tap notify on **and** a pending tap was consumed (`kind`, `age_ms`) |
+
+Unsubscribed submessages are omitted on the wire (proto3 defaults). The master walks `client_registry` once per request (`cmd/cmd_cache_status.c`).
+
+Host tools poll this at **~8 ms** when live-stream / WebSocket receive is enabled. Tap events stay visible for **2 s** in the UI/API after first sight.
+
+```bash
+go run . -port /dev/ttyUSB0 cache-status
+```
+
+External API (`serve -api-addr :8081`) uses the same command for WebSocket `accel` / `tap` push.
+
 ### ESPNOW_UNICAST_TEST command
 
 Minimal master→slave ESP-NOW unicast check (no BMA456). Use this before debugging `ACCEL_DEADZONE` unicast.
@@ -313,6 +412,83 @@ Minimal master→slave ESP-NOW unicast check (no BMA456). Use this before debugg
 
 **Firmware logs:** master `unicast TEST to … seq=N`; slave `UNICAST TEST OK from master … seq=N`.
 
+### FIND_ME command
+
+Locate a pod: the LED ring blinks **3× red, 3× green, 3× blue** at full brightness.
+
+**Request:** framed `22` + `espnow_find_me_request` (`client_id`: `0` = master only, `>0` = ESP-NOW unicast to that slave).
+
+**Response:** `espnow_find_me_response` (`success`, `client_id`).
+
+```bash
+go run . -port /dev/ttyUSB0 find-me
+go run . -port /dev/ttyUSB0 find-me -client 16
+```
+
+### SET_LOG_LEVEL command
+
+Read or set the **global** ESP-IDF log filter on the master (`esp_log_level_set("*", level)`). Does not affect the host UART protocol (UART1); `esp_log_*` output goes to the **debug console UART0** (USB, 115200).
+
+**Request:** framed `31` (`0x1f`) + `set_log_level_request` (`write`, `level` 0–5).
+
+**Response:** `set_log_level_response` (`success`, `level`).
+
+| `level` | `esp_log_level_t` |
+|---------|-------------------|
+| 0 | NONE |
+| 1 | ERROR |
+| 2 | WARN |
+| 3 | INFO |
+| 4 | DEBUG |
+| 5 | VERBOSE |
+
+Boot default follows `CONFIG_LOG_DEFAULT_LEVEL` in `sdkconfig` (not persisted across reboot).
+
+```bash
+go run . -port /dev/ttyUSB0 log-level
+go run . -port /dev/ttyUSB0 log-level -set -level 0
+```
+
+### RESTART command
+
+Reboot the master (`client_id=0`) or one slave via ESP-NOW (`client_id` = registry id). The device sends the UART response, then restarts after ~150 ms.
+
+**Request:** framed `23` + `restart_request`  
+**Response:** `restart_response` (`success`, `client_id`)
+
+```bash
+go run . -port /dev/ttyUSB0 restart
+go run . -port /dev/ttyUSB0 restart -client 16
+```
+
+### BATTERY_STATUS command
+
+Read **cached** LiPo ADC values on the **master** (master local + one entry per registered slave). Slaves push `ESPNOW_BATTERY_REPORT` every **30 s**; the master stores them in `client_registry` (`lipo1/2_valid`, `lipo1/2_mv`, `battery_updated_at`). The master refreshes its own pack on the same interval in `master_monitor_task`.
+
+**Request:** framed `26` + optional `battery_status_request` (`client_id`, `all_clients`).
+
+**Response:** `battery_status_response` with `samples[]` (`client_id`, `lipo1`, `lipo2`, `age_ms`).
+
+```bash
+# Host / goTool: all_clients returns master (id 0) + slaves from cache
+```
+
+### Software UV protection (LiPo)
+
+When `POWERPOD_BATTERY_UV_ENABLE` is `1` (default in `powerpod.h`, disable via CMake), the firmware can monitor ADC pin voltages on GPIO 1 and 11. Runtime enable is NVS `uv_en` per pod (missing key → **disabled**); UART `BATTERY_UV` / dashboard toggles it on master and slaves.
+
+| Condition | ADC threshold | Action |
+|-----------|---------------|--------|
+| External / absent | every valid channel < **100 mV** | Normal boot (no UV); clears latch if set |
+| Under-voltage | any valid channel in **100…2299 mV** | NVS latch `uv_latch`, restart into energy-save mode |
+| Charged | every non-absent valid channel ≥ **3000 mV** | Clear latch, restart into normal boot |
+
+**Energy-save boot:** LED mode `6` (first 4 LEDs red ~10 % for 5 s), then no WiFi/ESP-NOW, UART, I2C, BMA456, or button — only LiPo ADC polling every 30 s until charged. Disabling UV while latched clears the latch (requires a reachable host — not while already in energy-save).
+
+**UART:** `BATTERY_UV` (`0x24`) — `client_id=0` master, `>0` one slave, `all_clients` master + all slaves. Disabling also clears `uv_latch`.
+
+**Test LED pattern from host:** `led-ring -mode battery-low` (works even when UV feature is disabled).
+
 ### LED_RING command
 
 Control the 95-LED ring from the host. The firmware **does not** animate digits locally; only UART updates the display.
@@ -321,20 +497,31 @@ Control the 95-LED ring from the host. The firmware **does not** animate digits
 
 | Field | Meaning |
 |-------|---------|
-| `mode` | `0` = clear, `1` = progress bar, `2` = digit, `3` = blink full ring |
+| `mode` | `0` = clear, `1` = progress, `2` = digit (0–10), `3` = blink, `4` = find-me, `5` = solid color (all LEDs), `6` = battery-low (first 4 LEDs red ~10 % for 5 s) |
 | `progress` | 0–100 (% of ring lit, mode `1`) |
-| `digit` | 0–10 (mode `2`, same segment maps as built-in digits) |
+| `digit` | 0–10 (mode `2`, segment maps in `led_ring.c`) |
 | `r`, `g`, `b` | Color 0–255 |
 | `intensity` | Brightness 0–255 (scaled into RGB; `0` → firmware default ~5 %) |
 | `blink_ms`, `blink_count` | Pulse length and count (mode `3`; defaults 350 ms, 1) |
+| `client_id` | `0` = master ring only; `>0` = ESP-NOW unicast to one slave |
+| `all_clients` | Broadcast to all registered slaves |
+| `slaves_only` | With `all_clients`: do not change master ring |
 
-**Response:** `led_ring_progress_response` (`success`, `mode`, `progress`, `digit`).
+**Response:** `led_ring_progress_response` (`success`, `mode`, `progress`, `digit`, `client_id`, `slaves_updated`).
+
+Slaves receive the same command via ESP-NOW `ESPNOW_LED_RING` and run it locally.
 
 ```bash
 go run . -port /dev/ttyUSB0 led-ring -mode progress -progress 75 -g 80 -b 255
 go run . -port /dev/ttyUSB0 led-ring -mode digit -digit 7 -r 255 -g 200
 go run . -port /dev/ttyUSB0 led-ring -mode clear
 go run . -port /dev/ttyUSB0 led-ring -mode blink -g 255 -blink-count 2
+go run . -port /dev/ttyUSB0 find-me
+go run . -port /dev/ttyUSB0 find-me -client 16
+go run . -port /dev/ttyUSB0 led-ring -mode find-me
+go run . -port /dev/ttyUSB0 led-ring -mode battery-low -client 0
+go run . -port /dev/ttyUSB0 led-ring -mode color -r 255 -g 0 -b 0 -client 16
+go run . -port /dev/ttyUSB0 led-ring -mode digit -digit 5 -all
 ```
 
 ### CLIENT_INFO command
@@ -343,7 +530,7 @@ go run . -port /dev/ttyUSB0 led-ring -mode blink -g 255 -blink-count 2
 
 **Response:** payload `04` + nanopb `UartMessage` with `client_info_response.clients` — one `ClientInfo` per registered slave (from ESP-NOW `SLAVE_INFO`).
 
-Fields per client: `id`, `mac`, `version`, `available`, `used`, `last_ping`, `last_success_ping` — **milliseconds since** the last packet / last successful heartbeat (computed when `CLIENT_INFO` is answered; typically 0–1000 while the slave is heartbeating every 1 s).
+Fields per client: `id`, `mac`, `version`, `available`, `used`, `last_ping`, `last_success_ping`, `tap_notify_single`, `tap_notify_double`, `tap_notify_triple` — **milliseconds since** the last packet / last successful heartbeat (computed when `CLIENT_INFO` is answered; typically 0–1000 while the slave is heartbeating every 1 s).
 
 ## Client registry
 
@@ -354,6 +541,7 @@ Fields per client: `id`, `mac`, `version`, `available`, `used`, `last_ping`, `la
 | `client_registry_heartbeat(mac, id, version, …)` | Same as upsert for heartbeats; reactivates inactive clients |
 | `client_registry_check_timeouts(timeout_ms)` | Mark stale clients inactive (master monitor task) |
 | `client_registry_count()` / `client_registry_at(i)` | Iterate for UART encoding |
+| `client_registry_set_tap_notify()` / `client_registry_take_tap()` | Tap notify flags + short-lived tap cache (8 ms) |
 
 Slaves register when the master receives `SLAVE_INFO` on the matching network; `HEARTBEAT` keeps them marked available. The registry **MAC is always the ESP-NOW source address** (`recv_info.src_addr`), not the optional `mac` bytes in the protobuf (used only on the wire for debugging).
 
@@ -408,32 +596,49 @@ Target: ESP32-S3. Close serial monitor on the UART adapter port before running `
 | `powerpod.c` | `app_main`, DIP/network config, init order |
 | `powerpod.h` | Pin defines |
 | `app_config.h` | `app_config_t` |
-| `esp_now_comm.c/h` | WiFi, ESP-NOW, discover / slave info / OTA send |
+| `esp_now_comm.c/h` | ESP-NOW init and recv router |
+| `esp_now_core.c/h` | Shared WiFi, peer, send |
+| `esp_now_master.c/h` | Master discover, monitor, unicast |
+| `esp_now_slave.c/h` | Slave join, heartbeat, telemetry |
 | `ota_uart.c/h` | Shared 4 KiB OTA flash buffer (UART + ESP-NOW) |
 | `ota_espnow.c/h` | Master: distribute staged image to slaves |
-| `cmd_ota.c/h` | UART OTA command handlers (master only) |
+| `cmd/cmd_ota.c/h` | UART OTA command handlers (master only) |
 | `uart.c/h` | Framed UART RX/TX |
 | `uart_proto.c/h` | Encode/send `UartMessage` |
-| `cmd_handler.c/h` | Command queue and dispatch |
+| `cmd/cmd_handler.c/h` | Command queue and dispatch |
 | `uart_cmd.c/h` | Shared UART decode/send helpers for handlers |
-| `cmd_version.c/h` | VERSION handler |
-| `cmd_client_info.c/h` | CLIENT_INFO handler |
+| `cmd/cmd_version.c/h` | VERSION handler |
+| `cmd/cmd_client_info.c/h` | CLIENT_INFO handler |
 | `client_registry.c/h` | Registered slave table |
-| `bosch456.c/h` | BMA456H I2C driver, accel poll, tap INT, deadzone filter |
-| `board_input.c/h` | Taster GPIO12, LiPo ADC on GPIO1 / GPIO12 |
+| `bosch456.c/h` | BMA456H I2C driver, accel poll, on-demand read, tap INT, deadzone filter |
+| `cmd/cmd_tap_notify.c` | UART `TAP_NOTIFY` — ESP-NOW tap notify config |
+| `cmd/cmd_tap_config.c` | UART `TAP_CONFIG` — BMA456 multitap params + NVS |
+| `cmd/cmd_cache_status.c` | UART `CACHE_STATUS` — subscribed accel + tap cache poll |
+| `board_input.c/h` | Taster GPIO12, LiPo ADC on GPIO1 / GPIO11 |
+| `battery_uv.c/h` | Software LiPo UV latch, energy-save boot (`POWERPOD_BATTERY_UV_ENABLE`) |
+| `pod_settings.c/h` | NVS persistence (accel deadzone, tap config, UV latch) |
 | `led_ring.c/h` | LED ring (digit display, progress bar) |
-| `cmd_led_ring.c` | UART `LED_RING` progress command |
+| `cmd/cmd_led_ring.c` | UART `LED_RING` progress command |
+| `cmd/cmd_battery_uv.c` | UART `BATTERY_UV` — software UV enable + NVS / ESP-NOW |
+| `cmd/cmd_set_log_level.c` | UART `SET_LOG_LEVEL` — runtime ESP-IDF log level |
 | `proto/uart_messages.proto` | UART protocol schema |
 | `proto/esp_now_messages.proto` | ESP-NOW protocol schema |
 | `esp_now_proto.c/h` | Encode/decode `EspNowMessage` |
 | `proto/*.pb.c/h` | Generated nanopb |
 | `CMakeLists.txt` | Sources, `esp_wifi`, drivers, git hash |
 
-## Adding a new UART command
+## Adding a new feature (UART → ESP-NOW)
 
-1. Add or extend messages in `uart_messages.proto` and regenerate nanopb.
-2. Create `cmd_*.c` with a handler; register with `uart_cmd_register(MessageType_…, handler)`.
-3. Decode with `uart_cmd_decode()` / `UART_CMD_REQ()`; reply with `uart_cmd_init_response()` + `uart_cmd_send()`.
-4. Extend `goTool` or another host client to send the matching frame.
+End-to-end walkthrough (protobuf, master handler, ESP-NOW unicast to slaves, goTool, dashboard) with **Find me** as the worked example:
+
+**[docs/adding-a-feature.md](../docs/adding-a-feature.md)**
+
+Short checklist:
+
+1. Add or extend messages in `uart_messages.proto` (and `esp_now_messages.proto` if slaves are involved); run `make proto_generate` and `make gotool-proto`.
+2. Implement device logic in a shared module (e.g. `led_ring.c`), not only in the UART handler.
+3. Create `cmd/cmd_*.c`, register with `uart_cmd_register()`; decode with `uart_cmd_decode()` / `UART_CMD_REQ()`; reply with `uart_cmd_init_response()` + `uart_cmd_send()`.
+4. Master → slave: `esp_now_comm_send_*()` + slave branch in `espnow_recv_cb`.
+5. Extend `goTool` (CLI, optional `/api/…` and web UI).
 
 For ESP-NOW-driven PC updates later: map slave state to `ClientInfo` and send `CLIENT_INFO` over UART from the master.

main/app_config.h

@@ -9,6 +9,8 @@
 typedef struct {
   bool master;
   uint8_t network;
+  /** false = UART host, true = BLE host (DIP8; mutual exclusive, boot-only). */
+  bool host_ble;
   char running_partition[APP_RUNNING_PARTITION_LABEL_MAX];
 } app_config_t;
 

main/battery_uv.c

@@ -0,0 +1,196 @@
+#include "battery_uv.h"
+
+#if POWERPOD_BATTERY_UV_ENABLE
+
+#include "led_ring.h"
+#include "pod_reboot.h"
+#include "pod_settings.h"
+#include "esp_log.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+
+static const char *TAG = "[BATTERY_UV]";
+
+#define UV_DEBOUNCE_SAMPLES 2u
+#define UV_POLL_INTERVAL_MS 30000u
+
+static uint8_t s_uv_streak;
+static uint8_t s_charge_streak;
+
+bool battery_uv_is_latched(void) { return pod_settings_is_uv_latched(); }
+
+static bool channel_is_absent(uint32_t mv) {
+  return mv < BATTERY_UV_ABSENT_ADC_MV;
+}
+
+static bool channel_is_under(uint32_t mv) {
+  return !channel_is_absent(mv) && mv < BATTERY_UV_ADC_MV;
+}
+
+static void log_lipo_reading(const char *ctx, const board_lipo_reading_t *reading) {
+  if (reading == NULL) {
+    return;
+  }
+  ESP_LOGI(TAG,
+           "%s LIPO1 %s %lu mV  LIPO2 %s %lu mV", ctx,
+           reading->lipo1_valid ? "ok" : "n/a",
+           (unsigned long)reading->lipo1_mv, reading->lipo2_valid ? "ok" : "n/a",
+           (unsigned long)reading->lipo2_mv);
+}
+
+bool battery_uv_reading_is_external(const board_lipo_reading_t *reading) {
+  if (reading == NULL) {
+    return false;
+  }
+
+  bool any_valid = false;
+  if (reading->lipo1_valid) {
+    any_valid = true;
+    if (!channel_is_absent(reading->lipo1_mv)) {
+      return false;
+    }
+  }
+  if (reading->lipo2_valid) {
+    any_valid = true;
+    if (!channel_is_absent(reading->lipo2_mv)) {
+      return false;
+    }
+  }
+  return any_valid;
+}
+
+bool battery_uv_reading_is_under(const board_lipo_reading_t *reading) {
+  if (reading == NULL) {
+    return false;
+  }
+
+  if (reading->lipo1_valid && channel_is_under(reading->lipo1_mv)) {
+    return true;
+  }
+  if (reading->lipo2_valid && channel_is_under(reading->lipo2_mv)) {
+    return true;
+  }
+  return false;
+}
+
+bool battery_uv_reading_is_charged(const board_lipo_reading_t *reading) {
+  if (reading == NULL) {
+    return false;
+  }
+
+  bool any_pack = false;
+  if (reading->lipo1_valid && !channel_is_absent(reading->lipo1_mv)) {
+    any_pack = true;
+    if (reading->lipo1_mv < BATTERY_CHARGE_ADC_MV) {
+      return false;
+    }
+  }
+  if (reading->lipo2_valid && !channel_is_absent(reading->lipo2_mv)) {
+    any_pack = true;
+    if (reading->lipo2_mv < BATTERY_CHARGE_ADC_MV) {
+      return false;
+    }
+  }
+  return any_pack;
+}
+
+bool battery_uv_evaluate_boot(void) {
+  if (!pod_settings_is_uv_enabled()) {
+    ESP_LOGI(TAG, "UV protection disabled — normal boot");
+    return false;
+  }
+
+  board_lipo_reading_t reading;
+  board_input_read_lipo(&reading);
+  log_lipo_reading("boot check", &reading);
+
+  if (battery_uv_reading_is_external(&reading)) {
+    ESP_LOGI(TAG, "near-zero LiPo sense — external supply, normal boot");
+    if (pod_settings_is_uv_latched()) {
+      pod_settings_clear_uv_latched();
+    }
+    return false;
+  }
+
+  if (pod_settings_is_uv_latched() && battery_uv_reading_is_charged(&reading)) {
+    ESP_LOGI(TAG, "charged — clearing UV latch");
+    pod_settings_clear_uv_latched();
+    return false;
+  }
+
+  if (pod_settings_is_uv_latched() || battery_uv_reading_is_under(&reading)) {
+    if (!pod_settings_is_uv_latched()) {
+      ESP_LOGW(TAG, "under-voltage at boot — latching UV");
+    } else {
+      ESP_LOGW(TAG, "UV latched — energy-save boot");
+    }
+    pod_settings_set_uv_latched(true);
+    return true;
+  }
+
+  return false;
+}
+
+void battery_uv_poll(const board_lipo_reading_t *reading) {
+  if (reading == NULL || !pod_settings_is_uv_enabled() ||
+      pod_settings_is_uv_latched()) {
+    return;
+  }
+
+  if (battery_uv_reading_is_external(reading)) {
+    s_uv_streak = 0;
+    return;
+  }
+
+  if (battery_uv_reading_is_under(reading)) {
+    s_uv_streak++;
+    log_lipo_reading("under-voltage", reading);
+    ESP_LOGW(TAG, "under-voltage sample %u/%u", (unsigned)s_uv_streak,
+             (unsigned)UV_DEBOUNCE_SAMPLES);
+    if (s_uv_streak >= UV_DEBOUNCE_SAMPLES) {
+      ESP_LOGW(TAG, "UV confirmed — latching and restarting");
+      pod_settings_set_uv_latched(true);
+      pod_schedule_restart();
+    }
+    return;
+  }
+
+  s_uv_streak = 0;
+}
+
+void battery_uv_run_mode(void) {
+  s_charge_streak = 0;
+  s_uv_streak = 0;
+
+  led_ring_init();
+  led_ring_show_battery_low();
+
+  ESP_LOGW(TAG, "energy-save mode — ADC poll every %u ms", UV_POLL_INTERVAL_MS);
+
+  while (1) {
+    board_lipo_reading_t reading;
+    board_input_read_lipo(&reading);
+    log_lipo_reading("energy-save", &reading);
+
+    if (battery_uv_reading_is_external(&reading)) {
+      ESP_LOGI(TAG, "external supply — clearing UV latch and restarting");
+      pod_settings_clear_uv_latched();
+      pod_schedule_restart();
+    } else if (battery_uv_reading_is_charged(&reading)) {
+      s_charge_streak++;
+      ESP_LOGI(TAG, "charge sample %u/%u", (unsigned)s_charge_streak,
+               (unsigned)UV_DEBOUNCE_SAMPLES);
+      if (s_charge_streak >= UV_DEBOUNCE_SAMPLES) {
+        ESP_LOGI(TAG, "charged — clearing UV latch and restarting");
+        pod_settings_clear_uv_latched();
+        pod_schedule_restart();
+      }
+    } else {
+      s_charge_streak = 0;
+    }
+
+    vTaskDelay(pdMS_TO_TICKS(UV_POLL_INTERVAL_MS));
+  }
+}
+
+#endif

main/battery_uv.h

@@ -0,0 +1,63 @@
+#ifndef BATTERY_UV_H
+#define BATTERY_UV_H
+
+#include "board_input.h"
+#include "powerpod.h"
+#include <stdbool.h>
+
+#if POWERPOD_BATTERY_UV_ENABLE
+
+/** ADC pin voltage (mV) below which UV is triggered (3.0 V pack via 33k/10k divider). */
+#define BATTERY_UV_ADC_MV 2300u
+/** ADC pin voltage (mV) at which charging is detected (4.0 V pack, rounded). */
+#define BATTERY_CHARGE_ADC_MV 3000u
+/**
+ * ADC readings below this are treated as no pack / external supply (not UV).
+ * Noise floor / open sense divider → near 0 mV.
+ */
+#define BATTERY_UV_ABSENT_ADC_MV 100u
+
+bool battery_uv_is_latched(void);
+bool battery_uv_reading_is_under(const board_lipo_reading_t *reading);
+bool battery_uv_reading_is_charged(const board_lipo_reading_t *reading);
+/** true when every valid channel is near 0 (externally powered / no LiPo). */
+bool battery_uv_reading_is_external(const board_lipo_reading_t *reading);
+
+/** true → enter UV energy-save path (does not return). */
+bool battery_uv_evaluate_boot(void);
+
+void battery_uv_poll(const board_lipo_reading_t *reading);
+
+/** Blocks: LED indicator, then minimal ADC polling until charged. */
+void battery_uv_run_mode(void);
+
+#else
+
+static inline bool battery_uv_is_latched(void) { return false; }
+
+static inline bool battery_uv_reading_is_under(const board_lipo_reading_t *reading) {
+  (void)reading;
+  return false;
+}
+
+static inline bool battery_uv_reading_is_charged(const board_lipo_reading_t *reading) {
+  (void)reading;
+  return false;
+}
+
+static inline bool battery_uv_reading_is_external(const board_lipo_reading_t *reading) {
+  (void)reading;
+  return false;
+}
+
+static inline bool battery_uv_evaluate_boot(void) { return false; }
+
+static inline void battery_uv_poll(const board_lipo_reading_t *reading) {
+  (void)reading;
+}
+
+static inline void battery_uv_run_mode(void) {}
+
+#endif
+
+#endif

main/ble_host.c

@@ -0,0 +1,496 @@
+#include "ble_host.h"
+#include "esp_log.h"
+#include "esp_timer.h"
+#include "host_transport.h"
+#include "nvs_flash.h"
+#include "ota_espnow.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/semphr.h"
+#include "freertos/task.h"
+
+#include "nimble/nimble_port.h"
+#include "nimble/nimble_port_freertos.h"
+#include "host/ble_att.h"
+#include "host/ble_hs.h"
+#include "host/util/util.h"
+#include "services/gap/ble_svc_gap.h"
+#include "services/gatt/ble_svc_gatt.h"
+
+#include <string.h>
+
+static const char *TAG = "[BLE_HOST]";
+static const char *DEVICE_NAME = "Powerpod";
+
+#define BLE_CONN_ITVL_MIN_UNITS 6 /* 7.5 ms */
+#define BLE_CONN_ITVL_MAX_UNITS 6
+#define BLE_CONN_TUNE_MAX_TRIES 6
+/** Prefer large ATT MTU so CLIENT_INFO / BATTERY fit in fewer notify chunks. */
+#define BLE_PREFERRED_ATT_MTU 517
+#define BLE_NOTIFY_CHUNK_RETRIES 24
+/** During ESP-NOW OTA dist, fail notify sooner so WiFi/ESP-NOW keeps airtime. */
+#define BLE_NOTIFY_CHUNK_RETRIES_OTA_DIST 4
+#define BLE_NOTIFY_CHUNK_RETRY_MS 5
+/** Pace multi-chunk notifies so the central parser sees contiguous frame bytes. */
+#define BLE_NOTIFY_CHUNK_GAP_MS 8
+#define BLE_NOTIFY_CHUNK_GAP_OTA_DIST_MS 2
+
+/*
+ * Nordic UART style:
+ *   Service:        6e400001-b5a3-f393-e0a9-e50e24dcca9e
+ *   Characteristic: 6e400002-b5a3-f393-e0a9-e50e24dcca9e
+ * Write = host→ESP (framed), Notify = ESP→host (framed).
+ */
+static const ble_uuid128_t ble_svc_uuid =
+    BLE_UUID128_INIT(0x9e, 0xca, 0xdc, 0x24, 0x0e, 0xe5, 0xa9, 0xe0, 0x93, 0xf3,
+                     0xa3, 0xb5, 0x01, 0x00, 0x40, 0x6e);
+static const ble_uuid128_t ble_chr_uuid =
+    BLE_UUID128_INIT(0x9e, 0xca, 0xdc, 0x24, 0x0e, 0xe5, 0xa9, 0xe0, 0x93, 0xf3,
+                     0xa3, 0xb5, 0x02, 0x00, 0x40, 0x6e);
+
+static uint8_t own_addr_type;
+static uint16_t conn_handle = BLE_HS_CONN_HANDLE_NONE;
+static uint16_t ble_chr_val_handle;
+static bool notify_enabled;
+static uint16_t att_mtu = 23;
+static esp_timer_handle_t conn_tune_timer;
+static uint8_t conn_tune_tries;
+static SemaphoreHandle_t s_tx_mu;
+
+static int ble_gap_event(struct ble_gap_event *event, void *arg);
+static void ble_request_fast_conn_params(uint16_t handle);
+static void ble_optimize_link(uint16_t handle);
+
+bool ble_host_ready(void) {
+  return notify_enabled && conn_handle != BLE_HS_CONN_HANDLE_NONE;
+}
+
+uint16_t ble_host_att_mtu(void) { return att_mtu; }
+
+uint16_t ble_host_max_payload(void) {
+  if (att_mtu < 4) {
+    return 20;
+  }
+  return (uint16_t)(att_mtu - 3);
+}
+
+/**
+ * One ATT notification (≤ MTU-3). Retries on transient NimBLE buffer pressure.
+ */
+static esp_err_t ble_notify_chunk(const uint8_t *data, uint16_t len) {
+  const int max_retries = ota_espnow_distribution_active()
+                              ? BLE_NOTIFY_CHUNK_RETRIES_OTA_DIST
+                              : BLE_NOTIFY_CHUNK_RETRIES;
+  for (int attempt = 0; attempt < max_retries; attempt++) {
+    struct os_mbuf *om = ble_hs_mbuf_from_flat(data, len);
+    if (om == NULL) {
+      vTaskDelay(pdMS_TO_TICKS(BLE_NOTIFY_CHUNK_RETRY_MS));
+      continue;
+    }
+
+    int rc = ble_gatts_notify_custom(conn_handle, ble_chr_val_handle, om);
+    if (rc == 0) {
+      return ESP_OK;
+    }
+    /* Ownership stays with us on failure. */
+    os_mbuf_free_chain(om);
+    if (!ble_host_ready()) {
+      return ESP_ERR_INVALID_STATE;
+    }
+    ESP_LOGD(TAG, "notify chunk rc=%d attempt=%d len=%u", rc, attempt,
+             (unsigned)len);
+    vTaskDelay(pdMS_TO_TICKS(BLE_NOTIFY_CHUNK_RETRY_MS));
+  }
+  ESP_LOGW(TAG, "notify chunk gave up after retries len=%u", (unsigned)len);
+  return ESP_ERR_NO_MEM;
+}
+
+/**
+ * Send a full host frame. If larger than ATT MTU-3, split across consecutive
+ * notifies; goTool feeds every notify into the same byte parser, so the frame
+ * reassembles without a protocol change. Mutex keeps stream ticks from
+ * interleaving mid-frame.
+ */
+static esp_err_t ble_host_tx(const uint8_t *frame, size_t frame_len) {
+  if (!ble_host_ready()) {
+    return ESP_ERR_INVALID_STATE;
+  }
+  if (frame == NULL || frame_len == 0) {
+    return ESP_ERR_INVALID_ARG;
+  }
+
+  uint16_t max_chunk = ble_host_max_payload();
+  if (max_chunk == 0) {
+    return ESP_ERR_INVALID_SIZE;
+  }
+
+  if (s_tx_mu == NULL ||
+      xSemaphoreTake(s_tx_mu, pdMS_TO_TICKS(2000)) != pdTRUE) {
+    return ESP_ERR_TIMEOUT;
+  }
+
+  esp_err_t result = ESP_OK;
+  size_t off = 0;
+  while (off < frame_len) {
+    if (!ble_host_ready()) {
+      result = ESP_ERR_INVALID_STATE;
+      break;
+    }
+    size_t remain = frame_len - off;
+    uint16_t n =
+        (uint16_t)(remain > max_chunk ? max_chunk : remain);
+    result = ble_notify_chunk(&frame[off], n);
+    if (result != ESP_OK) {
+      ESP_LOGW(TAG, "TX abort at %u/%u (chunk %u, mtu_pay %u)",
+               (unsigned)off, (unsigned)frame_len, (unsigned)n,
+               (unsigned)max_chunk);
+      break;
+    }
+    off += n;
+    if (off < frame_len) {
+      const uint32_t gap_ms = ota_espnow_distribution_active()
+                                 ? BLE_NOTIFY_CHUNK_GAP_OTA_DIST_MS
+                                 : BLE_NOTIFY_CHUNK_GAP_MS;
+      vTaskDelay(pdMS_TO_TICKS(gap_ms));
+    }
+  }
+
+  xSemaphoreGive(s_tx_mu);
+  return result;
+}
+
+static void ble_conn_tune_timer_cb(void *arg) {
+  struct ble_gap_conn_desc desc;
+
+  (void)arg;
+  if (conn_handle == BLE_HS_CONN_HANDLE_NONE) {
+    return;
+  }
+  if (ble_gap_conn_find(conn_handle, &desc) != 0) {
+    return;
+  }
+  if (desc.conn_itvl <= BLE_CONN_ITVL_MAX_UNITS) {
+    ESP_LOGI(TAG, "conn already at interval_us=%lu",
+             (unsigned long)desc.conn_itvl * 1250UL);
+    return;
+  }
+  if (conn_tune_tries >= BLE_CONN_TUNE_MAX_TRIES) {
+    ESP_LOGW(TAG, "central kept interval_us=%lu (ESP requested 7500)",
+             (unsigned long)desc.conn_itvl * 1250UL);
+    return;
+  }
+
+  conn_tune_tries++;
+  ESP_LOGI(TAG, "retry fast conn params (%u/%u); current interval_us=%lu",
+           conn_tune_tries, BLE_CONN_TUNE_MAX_TRIES,
+           (unsigned long)desc.conn_itvl * 1250UL);
+  ble_request_fast_conn_params(conn_handle);
+  esp_timer_start_once(conn_tune_timer, 750 * 1000);
+}
+
+static void ble_schedule_conn_tune(void) {
+  conn_tune_tries = 0;
+  esp_timer_stop(conn_tune_timer);
+  esp_timer_start_once(conn_tune_timer, 300 * 1000);
+}
+
+static void ble_request_fast_conn_params(uint16_t handle) {
+  struct ble_gap_upd_params params = {
+      .itvl_min = BLE_CONN_ITVL_MIN_UNITS,
+      .itvl_max = BLE_CONN_ITVL_MAX_UNITS,
+      .latency = 0,
+      .supervision_timeout = 400,
+      .min_ce_len = 0,
+      .max_ce_len = 24,
+  };
+  int rc = ble_gap_update_params(handle, &params);
+  if (rc != 0) {
+    ESP_LOGW(TAG, "conn param update request failed: %d", rc);
+  } else {
+    ESP_LOGI(TAG, "requested conn interval 7.5 ms");
+  }
+}
+
+static void ble_optimize_link(uint16_t handle) {
+  int rc;
+
+  /*
+   * Do NOT request 2M PHY here. With ESP-NOW/WiFi coexistence the controller
+   * can assert in llc_phy_upd (e.g. "BLE assert llc_phy_upd.c …") and the
+   * host link dies — no further responses. Stay on default 1M.
+   */
+  ble_request_fast_conn_params(handle);
+
+  rc = ble_gap_set_data_len(handle, 251, 2120);
+  if (rc != 0) {
+    ESP_LOGW(TAG, "data len request failed: %d", rc);
+  }
+
+  ble_schedule_conn_tune();
+}
+
+static void ble_advertise(void) {
+  struct ble_gap_adv_params adv_params;
+  struct ble_hs_adv_fields fields;
+  int rc;
+
+  memset(&fields, 0, sizeof(fields));
+  fields.flags = BLE_HS_ADV_F_DISC_GEN | BLE_HS_ADV_F_BREDR_UNSUP;
+  fields.tx_pwr_lvl_is_present = 1;
+  fields.tx_pwr_lvl = BLE_HS_ADV_TX_PWR_LVL_AUTO;
+  fields.name = (uint8_t *)DEVICE_NAME;
+  fields.name_len = strlen(DEVICE_NAME);
+  fields.name_is_complete = 1;
+
+  rc = ble_gap_adv_set_fields(&fields);
+  if (rc != 0) {
+    ESP_LOGE(TAG, "adv set fields failed: %d", rc);
+    return;
+  }
+
+  memset(&adv_params, 0, sizeof(adv_params));
+  adv_params.conn_mode = BLE_GAP_CONN_MODE_UND;
+  adv_params.disc_mode = BLE_GAP_DISC_MODE_GEN;
+  adv_params.itvl_min = 0x20;
+  adv_params.itvl_max = 0x30;
+
+  rc = ble_gap_adv_start(own_addr_type, NULL, BLE_HS_FOREVER, &adv_params,
+                         ble_gap_event, NULL);
+  if (rc != 0) {
+    ESP_LOGE(TAG, "adv start failed: %d", rc);
+    return;
+  }
+
+  ESP_LOGI(TAG, "advertising as \"%s\"", DEVICE_NAME);
+}
+
+static int ble_chr_access(uint16_t conn_handle_arg, uint16_t attr_handle,
+                          struct ble_gatt_access_ctxt *ctxt, void *arg) {
+  (void)conn_handle_arg;
+  (void)attr_handle;
+  (void)arg;
+
+  switch (ctxt->op) {
+  case BLE_GATT_ACCESS_OP_READ_CHR:
+    return 0;
+
+  case BLE_GATT_ACCESS_OP_WRITE_CHR: {
+    uint16_t om_len = OS_MBUF_PKTLEN(ctxt->om);
+    uint8_t buf[512];
+    uint16_t copied = 0;
+    int rc;
+
+    if (om_len == 0 || om_len > sizeof(buf)) {
+      return BLE_ATT_ERR_INVALID_ATTR_VALUE_LEN;
+    }
+
+    rc = ble_hs_mbuf_to_flat(ctxt->om, buf, sizeof(buf), &copied);
+    if (rc != 0) {
+      return BLE_ATT_ERR_UNLIKELY;
+    }
+
+    host_rx_bytes(buf, copied);
+    return 0;
+  }
+
+  default:
+    return BLE_ATT_ERR_UNLIKELY;
+  }
+}
+
+static const struct ble_gatt_svc_def gatt_svcs[] = {
+    {
+        .type = BLE_GATT_SVC_TYPE_PRIMARY,
+        .uuid = &ble_svc_uuid.u,
+        .characteristics =
+            (struct ble_gatt_chr_def[]){
+                {
+                    .uuid = &ble_chr_uuid.u,
+                    .access_cb = ble_chr_access,
+                    .val_handle = &ble_chr_val_handle,
+                    .flags = BLE_GATT_CHR_F_READ | BLE_GATT_CHR_F_WRITE |
+                             BLE_GATT_CHR_F_WRITE_NO_RSP | BLE_GATT_CHR_F_NOTIFY,
+                },
+                {0},
+            },
+    },
+    {0},
+};
+
+static int gatt_svr_init(void) {
+  int rc;
+
+  ble_svc_gap_init();
+  ble_svc_gatt_init();
+
+  rc = ble_gatts_count_cfg(gatt_svcs);
+  if (rc != 0) {
+    return rc;
+  }
+
+  return ble_gatts_add_svcs(gatt_svcs);
+}
+
+static int ble_gap_event(struct ble_gap_event *event, void *arg) {
+  (void)arg;
+
+  switch (event->type) {
+  case BLE_GAP_EVENT_CONNECT:
+    ESP_LOGI(TAG, "connection %s; status=%d handle=%d",
+             event->connect.status == 0 ? "established" : "failed",
+             event->connect.status, event->connect.conn_handle);
+    if (event->connect.status != 0) {
+      ble_advertise();
+    } else {
+      conn_handle = event->connect.conn_handle;
+      ble_optimize_link(conn_handle);
+    }
+    return 0;
+
+  case BLE_GAP_EVENT_DISCONNECT:
+    ESP_LOGI(TAG, "disconnect; reason=%d", event->disconnect.reason);
+    esp_timer_stop(conn_tune_timer);
+    conn_tune_tries = 0;
+    conn_handle = BLE_HS_CONN_HANDLE_NONE;
+    notify_enabled = false;
+    att_mtu = 23;
+    ble_advertise();
+    return 0;
+
+  case BLE_GAP_EVENT_CONN_UPDATE: {
+    struct ble_gap_conn_desc desc;
+    if (ble_gap_conn_find(event->conn_update.conn_handle, &desc) == 0) {
+      ESP_LOGI(TAG, "conn updated; status=%d interval_us=%lu latency=%u",
+               event->conn_update.status,
+               (unsigned long)desc.conn_itvl * 1250UL, desc.conn_latency);
+      if (event->conn_update.status == 0 &&
+          desc.conn_itvl > BLE_CONN_ITVL_MAX_UNITS &&
+          conn_tune_tries < BLE_CONN_TUNE_MAX_TRIES) {
+        esp_timer_stop(conn_tune_timer);
+        esp_timer_start_once(conn_tune_timer, 500 * 1000);
+      }
+    }
+    return 0;
+  }
+
+  case BLE_GAP_EVENT_PHY_UPDATE_COMPLETE:
+    ESP_LOGI(TAG, "phy update; status=%d tx=%u rx=%u",
+             event->phy_updated.status, event->phy_updated.tx_phy,
+             event->phy_updated.rx_phy);
+    return 0;
+
+  case BLE_GAP_EVENT_ADV_COMPLETE:
+    ESP_LOGI(TAG, "advertise complete; reason=%d", event->adv_complete.reason);
+    ble_advertise();
+    return 0;
+
+  case BLE_GAP_EVENT_SUBSCRIBE:
+    if (event->subscribe.attr_handle == ble_chr_val_handle) {
+      notify_enabled = event->subscribe.cur_notify;
+      ESP_LOGI(TAG, "notify %s", notify_enabled ? "enabled" : "disabled");
+      if (notify_enabled && conn_handle != BLE_HS_CONN_HANDLE_NONE) {
+        ble_request_fast_conn_params(conn_handle);
+      }
+    }
+    return 0;
+
+  case BLE_GAP_EVENT_MTU:
+    att_mtu = event->mtu.value;
+    ESP_LOGI(TAG, "mtu update; handle=%d mtu=%d", event->mtu.conn_handle,
+             event->mtu.value);
+    return 0;
+
+  default:
+    return 0;
+  }
+}
+
+static void ble_on_sync(void) {
+  int rc;
+
+  rc = ble_hs_id_infer_auto(0, &own_addr_type);
+  if (rc != 0) {
+    ESP_LOGE(TAG, "ble_hs_id_infer_auto failed: %d", rc);
+    return;
+  }
+
+  uint8_t addr_val[6] = {0};
+  ble_hs_id_copy_addr(own_addr_type, addr_val, NULL);
+  ESP_LOGI(TAG, "device address: %02x:%02x:%02x:%02x:%02x:%02x", addr_val[5],
+           addr_val[4], addr_val[3], addr_val[2], addr_val[1], addr_val[0]);
+
+  ble_advertise();
+}
+
+static void ble_on_reset(int reason) {
+  ESP_LOGE(TAG, "nimble reset; reason=%d", reason);
+}
+
+static void ble_host_task(void *param) {
+  (void)param;
+  ESP_LOGI(TAG, "nimble host task started");
+  nimble_port_run();
+  nimble_port_freertos_deinit();
+}
+
+esp_err_t init_ble_host(QueueHandle_t cmd_queue) {
+  esp_err_t ret;
+
+  host_transport_set_cmd_queue(cmd_queue);
+  host_transport_set_tx(ble_host_tx);
+
+  s_tx_mu = xSemaphoreCreateMutex();
+  if (s_tx_mu == NULL) {
+    ESP_LOGE(TAG, "failed to create TX mutex");
+    return ESP_ERR_NO_MEM;
+  }
+
+  /* NVS may already be init via pod_settings; ignore ALREADY_INIT. */
+  ret = nvs_flash_init();
+  if (ret == ESP_ERR_NVS_NO_FREE_PAGES ||
+      ret == ESP_ERR_NVS_NEW_VERSION_FOUND) {
+    ESP_ERROR_CHECK(nvs_flash_erase());
+    ret = nvs_flash_init();
+  }
+  if (ret != ESP_OK && ret != ESP_ERR_INVALID_STATE) {
+    ESP_LOGE(TAG, "nvs_flash_init failed: %s", esp_err_to_name(ret));
+    return ret;
+  }
+
+  const esp_timer_create_args_t tune_args = {
+      .callback = &ble_conn_tune_timer_cb,
+      .name = "ble_conn_tune",
+  };
+  ESP_ERROR_CHECK(esp_timer_create(&tune_args, &conn_tune_timer));
+
+  ret = nimble_port_init();
+  if (ret != ESP_OK) {
+    ESP_LOGE(TAG, "nimble_port_init failed: %s", esp_err_to_name(ret));
+    return ret;
+  }
+
+  ble_hs_cfg.sync_cb = ble_on_sync;
+  ble_hs_cfg.reset_cb = ble_on_reset;
+
+  int rc = gatt_svr_init();
+  if (rc != 0) {
+    ESP_LOGE(TAG, "gatt_svr_init failed: %d", rc);
+    return ESP_FAIL;
+  }
+
+  rc = ble_svc_gap_device_name_set(DEVICE_NAME);
+  if (rc != 0) {
+    ESP_LOGE(TAG, "device name set failed: %d", rc);
+    return ESP_FAIL;
+  }
+
+  rc = ble_att_set_preferred_mtu(BLE_PREFERRED_ATT_MTU);
+  if (rc != 0) {
+    ESP_LOGW(TAG, "preferred MTU set failed: %d", rc);
+  } else {
+    ESP_LOGI(TAG, "preferred ATT MTU %u", (unsigned)BLE_PREFERRED_ATT_MTU);
+  }
+
+  nimble_port_freertos_init(ble_host_task);
+  ESP_LOGI(TAG, "BLE host transport started");
+  return ESP_OK;
+}

main/ble_host.h

@@ -0,0 +1,22 @@
+#ifndef BLE_HOST_H
+#define BLE_HOST_H
+
+#include "esp_err.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/queue.h"
+#include <stddef.h>
+#include <stdint.h>
+
+/** Start NimBLE host transport (Master only). Uses same framing as UART. */
+esp_err_t init_ble_host(QueueHandle_t cmd_queue);
+
+/** True when a central is connected and CCCD notify is enabled. */
+bool ble_host_ready(void);
+
+/** Negotiated ATT MTU (default 23 until exchange). */
+uint16_t ble_host_att_mtu(void);
+
+/** Max bytes per ATT notify/write (ATT MTU - 3). Frames may span multiple notifies. */
+uint16_t ble_host_max_payload(void);
+
+#endif

main/ble_stream.c

@@ -0,0 +1,196 @@
+#include "ble_stream.h"
+#include "app_config.h"
+#include "ble_host.h"
+#include "client_registry.h"
+#include "esp_log.h"
+#include "esp_timer.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "ota_session.h"
+#include "uart_cmd.h"
+#include "uart_messages.pb.h"
+#include "uart_proto.h"
+#include <string.h>
+
+static const char *TAG = "[BLE_STREAM]";
+
+/* Min matches FreeRTOS tick (HZ=100 → 10 ms); 8 ms would delay 0 ticks. */
+#define BLE_STREAM_PERIOD_MIN_MS 10u
+#define BLE_STREAM_PERIOD_MAX_MS 16u
+#define BLE_STREAM_PERIOD_DEFAULT_MS 10u
+
+static uint32_t s_period_ms = BLE_STREAM_PERIOD_DEFAULT_MS;
+static TaskHandle_t s_task;
+static volatile bool s_running;
+
+static bool tap_notify_any(const client_info_t *client) {
+  return client != NULL &&
+         (client->tap_notify_single || client->tap_notify_double ||
+          client->tap_notify_triple);
+}
+
+static alox_TapKind tap_kind_from_registry(uint32_t kind) {
+  switch (kind) {
+  case 1:
+    return alox_TapKind_TAP_SINGLE;
+  case 2:
+    return alox_TapKind_TAP_DOUBLE;
+  case 3:
+    return alox_TapKind_TAP_TRIPLE;
+  default:
+    return alox_TapKind_TAP_NONE;
+  }
+}
+
+static void fill_clients(alox_BleStreamTick *tick) {
+  tick->clients_count = 0;
+  size_t count = client_registry_count();
+  for (size_t i = 0; i < count; i++) {
+    const client_info_t *client = client_registry_at(i);
+    if (client == NULL) {
+      continue;
+    }
+    const bool want_accel = client->accel_stream_enabled;
+    const bool want_tap = tap_notify_any(client);
+    if (!want_accel && !want_tap) {
+      continue;
+    }
+    if (tick->clients_count >=
+        sizeof(tick->clients) / sizeof(tick->clients[0])) {
+      break;
+    }
+
+    alox_CacheClientStatus *entry = &tick->clients[tick->clients_count++];
+    entry->client_id = client->id;
+    entry->has_accel = false;
+    entry->has_tap = false;
+
+    if (want_accel) {
+      entry->has_accel = true;
+      entry->accel.valid = client->accel_valid;
+      if (client->accel_valid) {
+        entry->accel.x = client->accel_x;
+        entry->accel.y = client->accel_y;
+        entry->accel.z = client->accel_z;
+        entry->accel.age_ms =
+            client_registry_ms_since(client->accel_updated_at);
+      }
+    }
+
+    if (want_tap) {
+      uint32_t kind = 0;
+      uint32_t age_ms = 0;
+      if (client_registry_take_tap(client->id, &kind, &age_ms)) {
+        entry->has_tap = true;
+        entry->tap.kind = tap_kind_from_registry(kind);
+        entry->tap.age_ms = age_ms;
+      }
+    }
+  }
+}
+
+static bool any_accel_stream(void) {
+  size_t count = client_registry_count();
+  for (size_t i = 0; i < count; i++) {
+    const client_info_t *client = client_registry_at(i);
+    if (client != NULL && client->accel_stream_enabled) {
+      return true;
+    }
+  }
+  return false;
+}
+
+static esp_err_t send_tick_truncated(alox_UartMessage *msg) {
+  /*
+   * ble_host_tx splits frames larger than ATT MTU-3 across notifies. Only
+   * shrink the tick if it cannot encode into MAX_PAYLOAD_SIZE.
+   */
+  while (true) {
+    esp_err_t err = uart_send_uart_message(msg);
+    if (err == ESP_OK) {
+      return ESP_OK;
+    }
+    if (msg->payload.ble_stream_tick.clients_count == 0) {
+      ESP_LOGW(TAG, "tick too large even with 0 clients: %s",
+               esp_err_to_name(err));
+      return err;
+    }
+    msg->payload.ble_stream_tick.clients_count--;
+    ESP_LOGW(TAG, "truncating tick clients to %u for encode buffer",
+             (unsigned)msg->payload.ble_stream_tick.clients_count);
+  }
+}
+
+static void ble_stream_task(void *param) {
+  (void)param;
+  ESP_LOGI(TAG, "BLE stream task started period_ms=%lu",
+           (unsigned long)s_period_ms);
+
+  while (s_running) {
+    uint32_t period = s_period_ms;
+    if (period < BLE_STREAM_PERIOD_MIN_MS) {
+      period = BLE_STREAM_PERIOD_MIN_MS;
+    }
+    if (period > BLE_STREAM_PERIOD_MAX_MS) {
+      period = BLE_STREAM_PERIOD_MAX_MS;
+    }
+
+    /* Pause ticks during host OTA / ESP-NOW distribute so ATT bandwidth
+     * stays available for OTA_STATUS notifies. */
+    if (ble_host_ready() && any_accel_stream() && !ota_session_busy()) {
+      alox_UartMessage msg = alox_UartMessage_init_zero;
+      uart_cmd_init_response(&msg, alox_MessageType_BLE_STREAM_TICK,
+                             alox_UartMessage_ble_stream_tick_tag);
+      msg.payload.ble_stream_tick.esp_timestamp_us =
+          (uint64_t)esp_timer_get_time();
+      msg.payload.ble_stream_tick.period_ms = period;
+      fill_clients(&msg.payload.ble_stream_tick);
+
+      esp_err_t err = send_tick_truncated(&msg);
+      if (err != ESP_OK) {
+        ESP_LOGW(TAG, "tick send failed: %s", esp_err_to_name(err));
+      }
+    }
+
+    TickType_t delay_ticks = pdMS_TO_TICKS(period);
+    if (delay_ticks < 1) {
+      delay_ticks = 1;
+    }
+    vTaskDelay(delay_ticks);
+  }
+
+  s_task = NULL;
+  vTaskDelete(NULL);
+}
+
+void ble_stream_set_period_ms(uint32_t period_ms) {
+  if (period_ms == 0) {
+    period_ms = BLE_STREAM_PERIOD_DEFAULT_MS;
+  }
+  if (period_ms < BLE_STREAM_PERIOD_MIN_MS) {
+    period_ms = BLE_STREAM_PERIOD_MIN_MS;
+  }
+  if (period_ms > BLE_STREAM_PERIOD_MAX_MS) {
+    period_ms = BLE_STREAM_PERIOD_MAX_MS;
+  }
+  s_period_ms = period_ms;
+}
+
+uint32_t ble_stream_period_ms(void) { return s_period_ms; }
+
+void ble_stream_update(void) {
+  const app_config_t *cfg = app_config_get();
+  bool want = cfg != NULL && cfg->host_ble && any_accel_stream();
+
+  if (want && !s_running) {
+    s_running = true;
+    if (xTaskCreate(ble_stream_task, "ble_stream", 8192, NULL, 5, &s_task) !=
+        pdPASS) {
+      s_running = false;
+      s_task = NULL;
+      ESP_LOGE(TAG, "failed to create ble_stream task");
+    }
+  } else if (!want && s_running) {
+    s_running = false;
+  }
+}

main/ble_stream.h

@@ -0,0 +1,18 @@
+#ifndef BLE_STREAM_H
+#define BLE_STREAM_H
+
+#include <stdbool.h>
+#include <stdint.h>
+
+/** Clamp and store BLE push period (10–16 ms; min = FreeRTOS tick). */
+void ble_stream_set_period_ms(uint32_t period_ms);
+
+uint32_t ble_stream_period_ms(void);
+
+/**
+ * Re-evaluate whether the BLE push task should run (host_ble + any accel
+ * stream enabled). Safe to call from accel-stream handlers.
+ */
+void ble_stream_update(void);
+
+#endif

main/board_input.c

@@ -1,12 +1,16 @@
 #include "board_input.h"
 #include "powerpod.h"
+#include "client_registry.h"
 #include "driver/gpio.h"
+#if POWERPOD_BATTERY_UV_ENABLE
+#include "battery_uv.h"
+#endif
 #include "esp_adc/adc_oneshot.h"
 #include "esp_log.h"
 #include "freertos/FreeRTOS.h"
 #include "freertos/idf_additions.h"
 #include "freertos/queue.h"
-#include <stdint.h>
+#include <string.h>
 
 static const char *TAG_BTN = "[BTN]";
 static const char *TAG_LIPO = "[LIPO]";
@@ -14,66 +18,108 @@ static const char *TAG_LIPO = "[LIPO]";
 #define LIPO_SAMPLE_INTERVAL_MS 10000
 #define BUTTON_QUEUE_LEN 4
 #define BUTTON_DEBOUNCE_MS 80
+#define LIPO_ADC_FULL_SCALE_MV 3300
+#define LIPO_ADC_MAX_RAW 4095
 
 static QueueHandle_t s_button_queue;
-static adc_oneshot_unit_handle_t s_adc;
-static bool s_lipo1_ok;
-static bool s_lipo2_ok;
-static adc_channel_t s_lipo1_ch;
-static adc_channel_t s_lipo2_ch;
 
-static esp_err_t adc_init_channel(int gpio, adc_channel_t *out_ch, bool *out_ok) {
-  adc_unit_t unit;
-  esp_err_t err = adc_oneshot_io_to_channel(gpio, &unit, out_ch);
+typedef struct {
+  adc_oneshot_unit_handle_t unit;
+  adc_channel_t ch;
+  bool ok;
+} lipo_adc_t;
+
+static lipo_adc_t s_lipo1;
+static lipo_adc_t s_lipo2;
+
+static esp_err_t adc_init_gpio(int gpio, lipo_adc_t *out) {
+  out->unit = NULL;
+  out->ok = false;
+
+  adc_unit_t unit_id;
+  esp_err_t err = adc_oneshot_io_to_channel(gpio, &unit_id, &out->ch);
   if (err != ESP_OK) {
     ESP_LOGW(TAG_LIPO, "GPIO%d not an ADC channel: %s", gpio, esp_err_to_name(err));
-    *out_ok = false;
     return err;
   }
-  if (unit != ADC_UNIT_1) {
-    ESP_LOGW(TAG_LIPO, "GPIO%d on ADC unit %d (expected ADC1)", gpio, (int)unit);
+
+  adc_oneshot_unit_init_cfg_t init_cfg = {
+      .unit_id = unit_id,
+  };
+  err = adc_oneshot_new_unit(&init_cfg, &out->unit);
+  if (err != ESP_OK) {
+    ESP_LOGW(TAG_LIPO, "ADC unit %d init GPIO%d failed: %s", (int)unit_id, gpio,
+             esp_err_to_name(err));
+    return err;
   }
+
   adc_oneshot_chan_cfg_t chan_cfg = {
       .atten = ADC_ATTEN_DB_12,
       .bitwidth = ADC_BITWIDTH_DEFAULT,
   };
-  err = adc_oneshot_config_channel(s_adc, *out_ch, &chan_cfg);
+  err = adc_oneshot_config_channel(out->unit, out->ch, &chan_cfg);
   if (err != ESP_OK) {
     ESP_LOGW(TAG_LIPO, "ADC config GPIO%d failed: %s", gpio, esp_err_to_name(err));
-    *out_ok = false;
+    adc_oneshot_del_unit(out->unit);
+    out->unit = NULL;
     return err;
   }
-  *out_ok = true;
+
+  out->ok = true;
+  ESP_LOGI(TAG_LIPO, "GPIO%d ready (ADC unit %d)", gpio, (int)unit_id);
   return ESP_OK;
 }
 
+static uint32_t raw_to_mv(int raw) {
+  if (raw < 0) {
+    return 0;
+  }
+  return (uint32_t)((raw * LIPO_ADC_FULL_SCALE_MV) / LIPO_ADC_MAX_RAW);
+}
+
+static void sample_one_channel(const lipo_adc_t *adc, uint32_t *mv_out,
+                               bool *valid_out) {
+  *valid_out = false;
+  *mv_out = 0;
+  if (adc == NULL || !adc->ok || adc->unit == NULL) {
+    return;
+  }
+  int raw = 0;
+  if (adc_oneshot_read(adc->unit, adc->ch, &raw) == ESP_OK) {
+    *valid_out = true;
+    *mv_out = raw_to_mv(raw);
+  }
+}
+
+void board_input_read_lipo(board_lipo_reading_t *out) {
+  if (out == NULL) {
+    return;
+  }
+  memset(out, 0, sizeof(*out));
+  sample_one_channel(&s_lipo1, &out->lipo1_mv, &out->lipo1_valid);
+  sample_one_channel(&s_lipo2, &out->lipo2_mv, &out->lipo2_valid);
+}
+
 static void lipo_monitor_task(void *param) {
   (void)param;
 
   ESP_LOGI(TAG_LIPO, "monitor task (interval %d ms)", LIPO_SAMPLE_INTERVAL_MS);
 
   while (1) {
-    int raw1 = -1;
-    int raw2 = -1;
-    int mv1 = -1;
-    int mv2 = -1;
-
-    if (s_lipo1_ok) {
-      raw1 = 0;
-      if (adc_oneshot_read(s_adc, s_lipo1_ch, &raw1) == ESP_OK) {
-        mv1 = (raw1 * 3300) / 4095;
-      }
-    }
-    if (s_lipo2_ok) {
-      raw2 = 0;
-      if (adc_oneshot_read(s_adc, s_lipo2_ch, &raw2) == ESP_OK) {
-        mv2 = (raw2 * 3300) / 4095;
-      }
-    }
+    board_lipo_reading_t reading;
+    board_input_read_lipo(&reading);
+    client_registry_set_master_battery(&reading);
 
     ESP_LOGI(TAG_LIPO,
-             "LIPO1 GPIO%d raw=%d (~%d mV)  LIPO2 GPIO%d raw=%d (~%d mV)",
-             V_LIPO_1_GPIO, raw1, mv1, V_LIPO_2_GPIO, raw2, mv2);
+             "LIPO1 GPIO%d %s %lu mV  LIPO2 GPIO%d %s %lu mV",
+             V_LIPO_1_GPIO, reading.lipo1_valid ? "ok" : "n/a",
+             (unsigned long)reading.lipo1_mv, V_LIPO_2_GPIO,
+             reading.lipo2_valid ? "ok" : "n/a",
+             (unsigned long)reading.lipo2_mv);
+
+#if POWERPOD_BATTERY_UV_ENABLE
+    battery_uv_poll(&reading);
+#endif
 
     vTaskDelay(pdMS_TO_TICKS(LIPO_SAMPLE_INTERVAL_MS));
   }
@@ -145,29 +191,30 @@ static esp_err_t init_button(void) {
   return ESP_OK;
 }
 
-static esp_err_t init_lipo_adc(void) {
-  adc_oneshot_unit_init_cfg_t init_cfg = {
-      .unit_id = ADC_UNIT_1,
-  };
-  esp_err_t err = adc_oneshot_new_unit(&init_cfg, &s_adc);
-  if (err != ESP_OK) {
-    ESP_LOGW(TAG_LIPO, "ADC init failed: %s", esp_err_to_name(err));
-    return err;
-  }
+static esp_err_t init_lipo_adc_hw(void) {
+  memset(&s_lipo1, 0, sizeof(s_lipo1));
+  memset(&s_lipo2, 0, sizeof(s_lipo2));
 
-  adc_init_channel(V_LIPO_1_GPIO, &s_lipo1_ch, &s_lipo1_ok);
+  adc_init_gpio(V_LIPO_1_GPIO, &s_lipo1);
 
   if (V_LIPO_2_GPIO == TASTER_GPIO) {
     ESP_LOGW(TAG_LIPO, "LIPO2 on GPIO%d skipped (button uses same pin)",
              V_LIPO_2_GPIO);
-    s_lipo2_ok = false;
   } else {
-    adc_init_channel(V_LIPO_2_GPIO, &s_lipo2_ch, &s_lipo2_ok);
+    adc_init_gpio(V_LIPO_2_GPIO, &s_lipo2);
   }
 
-  if (!s_lipo1_ok && !s_lipo2_ok) {
-    adc_oneshot_del_unit(s_adc);
-    s_adc = NULL;
+  if (!s_lipo1.ok && !s_lipo2.ok) {
+    return ESP_FAIL;
+  }
+
+  return ESP_OK;
+}
+
+esp_err_t board_input_init_adc_only(void) { return init_lipo_adc_hw(); }
+
+esp_err_t board_input_start_lipo_monitor(void) {
+  if (!s_lipo1.ok && !s_lipo2.ok) {
     return ESP_FAIL;
   }
 
@@ -178,16 +225,23 @@ static esp_err_t init_lipo_adc(void) {
   return ESP_OK;
 }
 
+esp_err_t board_input_init_button(void) { return init_button(); }
+
 esp_err_t board_input_init(void) {
-  esp_err_t err = init_button();
+  esp_err_t err = board_input_init_adc_only();
+  if (err != ESP_OK) {
+    ESP_LOGW(TAG_LIPO, "ADC init failed: %s", esp_err_to_name(err));
+  } else {
+    err = board_input_start_lipo_monitor();
+    if (err != ESP_OK) {
+      ESP_LOGW(TAG_LIPO, "monitor task failed: %s", esp_err_to_name(err));
+    }
+  }
+
+  err = board_input_init_button();
   if (err != ESP_OK) {
     ESP_LOGW(TAG_BTN, "init failed: %s", esp_err_to_name(err));
   }
 
-  err = init_lipo_adc();
-  if (err != ESP_OK) {
-    ESP_LOGW(TAG_LIPO, "init failed: %s", esp_err_to_name(err));
-  }
-
   return ESP_OK;
 }

main/board_input.h

@@ -1,12 +1,34 @@
 #ifndef BOARD_INPUT_H
 #define BOARD_INPUT_H
 
+#include <stdbool.h>
+#include <stdint.h>
+
 #include "esp_err.h"
 
+typedef struct {
+  bool lipo1_valid;
+  bool lipo2_valid;
+  uint32_t lipo1_mv;
+  uint32_t lipo2_mv;
+} board_lipo_reading_t;
+
 /**
- * Button (log on press) and LiPo ADC sampling (log every 10 s).
+ * Button (log on press) and LiPo ADC sampling (background log every 10 s).
  * TODO: Pin assignments come from powerpod.h and may not match final hardware yet.
  */
 esp_err_t board_input_init(void);
 
+/** LiPo ADC channels only (no button, no background task). */
+esp_err_t board_input_init_adc_only(void);
+
+/** Start 10 s LiPo monitor task (normal boot only). */
+esp_err_t board_input_start_lipo_monitor(void);
+
+/** Front-panel button debounce task. */
+esp_err_t board_input_init_button(void);
+
+/** On-demand ADC read of both LiPo sense inputs (if configured). */
+void board_input_read_lipo(board_lipo_reading_t *out);
+
 #endif

main/bosch456.c

@@ -2,7 +2,7 @@
  * BMA456H integration for Powerpod (ESP-IDF I2C master + Bosch SensorAPI).
  *
  * Polls accelerometer at 10 Hz; tap events arrive on BMA456_INT_GPIO.
- * Accel logging is filtered in software (deadzone); see ACCEL_DEADZONE UART command.
+ * Accel log + ESP-NOW stream share a software deadzone filter (emit on change).
  */
 
 #include "bosch456.h"
@@ -14,6 +14,7 @@
 #include "esp_err.h"
 #include "esp_log.h"
 #include "freertos/idf_additions.h"
+#include "freertos/semphr.h"
 #include <rom/ets_sys.h>
 #include <string.h>
 
@@ -32,8 +33,16 @@ static int16_t s_last_x;
 static int16_t s_last_y;
 static int16_t s_last_z;
 static bool s_have_last_sample;
+static int16_t s_stream_last_x;
+static int16_t s_stream_last_y;
+static int16_t s_stream_last_z;
+static bool s_stream_have_last;
 
 static volatile bool s_int_pending;
+static SemaphoreHandle_t s_accel_mutex;
+static bma456_tap_handler_t s_tap_handler;
+static void *s_tap_handler_ctx;
+static bma456_tap_config_t s_tap_config = BMA456_TAP_CONFIG_DEFAULT;
 
 static esp_err_t check_bma4(const char *api_name, int8_t rslt);
 
@@ -114,6 +123,7 @@ bool bma456_is_ready(void) { return s_bma456_ready; }
 void bma456_set_accel_deadzone(uint32_t deadzone_lsb) {
   s_accel_deadzone = deadzone_lsb;
   s_have_last_sample = false;
+  s_stream_have_last = false;
   if (s_bma456_ready) {
     ESP_LOGI(TAG, "accel deadzone %lu LSB", (unsigned long)deadzone_lsb);
   }
@@ -121,6 +131,142 @@ void bma456_set_accel_deadzone(uint32_t deadzone_lsb) {
 
 uint32_t bma456_get_accel_deadzone(void) { return s_accel_deadzone; }
 
+void bma456_accel_stream_reset_baseline(void) { s_stream_have_last = false; }
+
+bool bma456_accel_stream_take_if_changed(int16_t x, int16_t y, int16_t z) {
+  if (s_stream_have_last) {
+    if (axis_delta(x, s_stream_last_x) <= (int16_t)s_accel_deadzone &&
+        axis_delta(y, s_stream_last_y) <= (int16_t)s_accel_deadzone &&
+        axis_delta(z, s_stream_last_z) <= (int16_t)s_accel_deadzone) {
+      return false;
+    }
+  }
+  s_stream_last_x = x;
+  s_stream_last_y = y;
+  s_stream_last_z = z;
+  s_stream_have_last = true;
+  return true;
+}
+
+bool bma456_tap_config_valid(const bma456_tap_config_t *cfg) {
+  if (cfg == NULL) {
+    return false;
+  }
+  if (cfg->tap_sens_thres > 15u) {
+    return false;
+  }
+  if (cfg->axis_sel > 2u) {
+    return false;
+  }
+  if (cfg->wait_for_timeout > 1u) {
+    return false;
+  }
+  if (!cfg->enable_single && !cfg->enable_double && !cfg->enable_triple) {
+    return false;
+  }
+  return true;
+}
+
+void bma456_get_tap_config(bma456_tap_config_t *cfg_out) {
+  if (cfg_out == NULL) {
+    return;
+  }
+  *cfg_out = s_tap_config;
+}
+
+static esp_err_t apply_tap_parameters(const bma456_tap_config_t *cfg) {
+  struct bma456h_multitap_settings tap_settings = {0};
+  int8_t ret = bma456h_tap_get_parameter(&tap_settings, &s_bma456);
+  if (check_bma4("bma456h_tap_get_parameter", ret) != ESP_OK) {
+    return ESP_FAIL;
+  }
+  tap_settings.tap_sens_thres = cfg->tap_sens_thres;
+  tap_settings.max_gest_dur = cfg->max_gest_dur;
+  tap_settings.tap_shock_dur = cfg->tap_shock_dur;
+  tap_settings.quite_time_after_gest = cfg->quite_time_after_gest;
+  tap_settings.wait_for_timeout = cfg->wait_for_timeout;
+  tap_settings.axis_sel = cfg->axis_sel;
+  ret = bma456h_tap_set_parameter(&tap_settings, &s_bma456);
+  if (check_bma4("bma456h_tap_set_parameter", ret) != ESP_OK) {
+    return ESP_FAIL;
+  }
+
+  /* Disable all tap kinds first, then enable the requested set. */
+  uint16_t all_taps =
+      BMA456H_SINGLE_TAP_EN | BMA456H_DOUBLE_TAP_EN | BMA456H_TRIPLE_TAP_EN;
+  ret = bma456h_feature_enable(all_taps, BMA4_DISABLE, &s_bma456);
+  if (check_bma4("bma456h_feature_enable(disable taps)", ret) != ESP_OK) {
+    return ESP_FAIL;
+  }
+
+  uint16_t tap_features = 0;
+  if (cfg->enable_single) {
+    tap_features |= BMA456H_SINGLE_TAP_EN;
+  }
+  if (cfg->enable_double) {
+    tap_features |= BMA456H_DOUBLE_TAP_EN;
+  }
+  if (cfg->enable_triple) {
+    tap_features |= BMA456H_TRIPLE_TAP_EN;
+  }
+  ret = bma456h_feature_enable(tap_features, BMA4_ENABLE, &s_bma456);
+  if (check_bma4("bma456h_feature_enable(taps)", ret) != ESP_OK) {
+    return ESP_FAIL;
+  }
+
+  ESP_LOGI(TAG,
+           "tap config sens=%u max_gest=%u shock=%u quiet=%u wait=%u axis=%u "
+           "(single=%d double=%d triple=%d)",
+           (unsigned)cfg->tap_sens_thres, (unsigned)cfg->max_gest_dur,
+           (unsigned)cfg->tap_shock_dur, (unsigned)cfg->quite_time_after_gest,
+           (unsigned)cfg->wait_for_timeout, (unsigned)cfg->axis_sel,
+           cfg->enable_single, cfg->enable_double, cfg->enable_triple);
+  return ESP_OK;
+}
+
+esp_err_t bma456_set_tap_config(const bma456_tap_config_t *cfg) {
+  if (!bma456_tap_config_valid(cfg)) {
+    return ESP_ERR_INVALID_ARG;
+  }
+  if (s_bma456_ready) {
+    esp_err_t err = apply_tap_parameters(cfg);
+    if (err != ESP_OK) {
+      return err;
+    }
+  }
+  s_tap_config = *cfg;
+  return ESP_OK;
+}
+
+void bma456_set_tap_handler(bma456_tap_handler_t handler, void *ctx) {
+  s_tap_handler = handler;
+  s_tap_handler_ctx = ctx;
+}
+
+esp_err_t bma456_read_accel(int16_t *x, int16_t *y, int16_t *z) {
+  if (!s_bma456_ready || x == NULL || y == NULL || z == NULL) {
+    return ESP_ERR_INVALID_STATE;
+  }
+  if (s_accel_mutex == NULL ||
+      xSemaphoreTake(s_accel_mutex, pdMS_TO_TICKS(500)) != pdTRUE) {
+    return ESP_ERR_TIMEOUT;
+  }
+
+  struct bma4_accel sens_data = {0};
+  int8_t ret = bma4_read_accel_xyz(&sens_data, &s_bma456);
+  xSemaphoreGive(s_accel_mutex);
+
+  if (ret != BMA4_OK) {
+    bma4_error_codes_print_result("bma4_read_accel_xyz", ret);
+    return ESP_FAIL;
+  }
+
+  *x = sens_data.x;
+  *y = sens_data.y;
+  *z = sens_data.z;
+  return ESP_OK;
+}
+
 void bma456_report_accel_if_changed(int16_t x, int16_t y, int16_t z) {
   if (!s_bma456_ready || !sample_exceeds_deadzone(x, y, z)) {
     return;
@@ -157,10 +303,19 @@ static void handle_tap_interrupt(void) {
 
   if (tap_out.single_tap) {
     ESP_LOGI(TAG, "tap: single");
+    if (s_tap_handler != NULL) {
+      s_tap_handler(BMA456_TAP_SINGLE, s_tap_handler_ctx);
+    }
   } else if (tap_out.double_tap) {
     ESP_LOGI(TAG, "tap: double");
+    if (s_tap_handler != NULL) {
+      s_tap_handler(BMA456_TAP_DOUBLE, s_tap_handler_ctx);
+    }
   } else if (tap_out.triple_tap) {
     ESP_LOGI(TAG, "tap: triple");
+    if (s_tap_handler != NULL) {
+      s_tap_handler(BMA456_TAP_TRIPLE, s_tap_handler_ctx);
+    }
   }
 }
 
@@ -187,11 +342,19 @@ static void read_sensor_task(void *param) {
   struct bma4_accel sens_data = {0};
 
   while (1) {
-    int8_t ret = bma4_read_accel_xyz(&sens_data, &s_bma456);
-    if (ret == BMA4_OK) {
+    bool got_sample = false;
+    if (s_accel_mutex != NULL &&
+        xSemaphoreTake(s_accel_mutex, pdMS_TO_TICKS(500)) == pdTRUE) {
+      int8_t ret = bma4_read_accel_xyz(&sens_data, &s_bma456);
+      xSemaphoreGive(s_accel_mutex);
+      if (ret == BMA4_OK) {
+        got_sample = true;
+      } else {
+        bma4_error_codes_print_result("bma4_read_accel_xyz", ret);
+      }
+    }
+    if (got_sample) {
       bma456_report_accel_if_changed(sens_data.x, sens_data.y, sens_data.z);
-    } else {
-      bma4_error_codes_print_result("bma4_read_accel_xyz", ret);
     }
 
     if (s_int_pending) {
@@ -208,21 +371,7 @@ static esp_err_t configure_tap_interrupt(void) {
   int8_t ret;
   const uint8_t int_line = BMA4_INTR2_MAP;
 
-  struct bma456h_multitap_settings tap_settings = {0};
-  ret = bma456h_tap_get_parameter(&tap_settings, &s_bma456);
-  if (check_bma4("bma456h_tap_get_parameter", ret) != ESP_OK) {
-    return ESP_FAIL;
-  }
-  tap_settings.tap_sens_thres = 0;
-  ret = bma456h_tap_set_parameter(&tap_settings, &s_bma456);
-  if (check_bma4("bma456h_tap_set_parameter", ret) != ESP_OK) {
-    return ESP_FAIL;
-  }
-
-  ret = bma456h_feature_enable(
-      (BMA456H_SINGLE_TAP_EN | BMA456H_DOUBLE_TAP_EN | BMA456H_TRIPLE_TAP_EN),
-      BMA4_ENABLE, &s_bma456);
-  if (check_bma4("bma456h_feature_enable", ret) != ESP_OK) {
+  if (apply_tap_parameters(&s_tap_config) != ESP_OK) {
     return ESP_FAIL;
   }
 
@@ -343,6 +492,13 @@ esp_err_t init_bma456(i2c_master_bus_handle_t bus_handle) {
     goto fail;
   }
 
+  if (s_accel_mutex == NULL) {
+    s_accel_mutex = xSemaphoreCreateMutex();
+    if (s_accel_mutex == NULL) {
+      goto fail;
+    }
+  }
+
   if (xTaskCreate(read_sensor_task, "bma456_poll", 4096, NULL, 1, NULL) !=
       pdPASS) {
     goto fail;

main/bosch456.h

@@ -10,6 +10,8 @@
 
 #include "driver/i2c_types.h"
 #include "esp_err.h"
+#include <stdbool.h>
+#include <stdint.h>
 
 /** 7-bit I2C address (SDO low). */
 #define BMA456_I2C_ADDR 0x18
@@ -17,9 +19,56 @@
 /** Sensor interrupt line → ESP32 GPIO (active high, rising edge). */
 #define BMA456_INT_GPIO 10
 
-/** Software filter: log accel only when |axis - last| > deadzone (raw LSB). */
+/** Software filter: emit accel only when |axis - last| > deadzone (raw LSB). */
 #define BMA456_DEFAULT_ACCEL_DEADZONE 100u
 
+/**
+ * BMA456H multitap tuning (see BST-BMA456-AN000).
+ *
+ * Time fields use register units: value × 5 ms (e.g. 100 → 500 ms).
+ * tap_sens_thres: 0 = most sensitive … 15 = least (~78 mg per LSB).
+ * axis_sel: 0 = X, 1 = Y, 2 = Z.
+ * wait_for_timeout: 0 = report immediately, 1 = wait max_gest_dur for classification.
+ */
+typedef struct {
+  uint16_t tap_sens_thres;
+  uint16_t max_gest_dur;
+  uint16_t tap_shock_dur;
+  uint16_t quite_time_after_gest;
+  uint16_t wait_for_timeout;
+  uint16_t axis_sel;
+  bool enable_single;
+  bool enable_double;
+  bool enable_triple;
+} bma456_tap_config_t;
+
+/** Edit these values for the compile-time default (overridden by NVS if set). */
+#define BMA456_TAP_CONFIG_DEFAULT                                              \
+  {                                                                            \
+      .tap_sens_thres = 5,           /* sensitive; 0=max, Bosch default=9 */   \
+      .max_gest_dur = 100,             /* 500 ms window for double/triple */   \
+      .tap_shock_dur = 6,              /* 30 ms debounce after each impulse */ \
+      .quite_time_after_gest = 60,     /* 300 ms min gap between gestures */   \
+      .wait_for_timeout = 0,           /* 0 = faster single-tap response */    \
+      .axis_sel = 2,                   /* Z axis */                            \
+      .enable_single = true,                                                   \
+      .enable_double = true,                                                   \
+      .enable_triple = true,                                                   \
+  }
+
+/** True if cfg fields are within sensor limits and at least one tap kind is on. */
+bool bma456_tap_config_valid(const bma456_tap_config_t *cfg);
+
+/** Copy current runtime tap config (compile default until set/NVS-applied). */
+void bma456_get_tap_config(bma456_tap_config_t *cfg_out);
+
+/**
+ * Apply tap config to the sensor (and keep RAM copy).
+ * Returns ESP_ERR_INVALID_ARG if invalid. When the sensor is not ready, only
+ * the RAM copy is updated (ESP_OK).
+ */
+esp_err_t bma456_set_tap_config(const bma456_tap_config_t *cfg);
+
 /**
  * Probe and configure the sensor on bus_handle (100 kHz device).
  * On failure the device is removed and ESP_ERR_NOT_FOUND / ESP_FAIL is returned;
@@ -32,7 +81,32 @@ bool bma456_is_ready(void);
 void bma456_set_accel_deadzone(uint32_t deadzone_lsb);
 uint32_t bma456_get_accel_deadzone(void);
 
+/**
+ * ESP-NOW stream filter: true if sample exceeds deadzone vs last streamed
+ * sample (or no baseline yet). On true, commits (x,y,z) as stream baseline.
+ * Independent of the log filter baseline.
+ */
+bool bma456_accel_stream_take_if_changed(int16_t x, int16_t y, int16_t z);
+
+/** Force next stream take to accept (call when accel stream is enabled). */
+void bma456_accel_stream_reset_baseline(void);
+
 /** Log accel when any axis moved more than deadzone since last reported sample. */
 void bma456_report_accel_if_changed(int16_t x, int16_t y, int16_t z);
 
+/** Tap kinds from BMA456H multitap output. */
+typedef enum {
+  BMA456_TAP_SINGLE = 1,
+  BMA456_TAP_DOUBLE = 2,
+  BMA456_TAP_TRIPLE = 3,
+} bma456_tap_kind_t;
+
+typedef void (*bma456_tap_handler_t)(bma456_tap_kind_t kind, void *ctx);
+
+/** Optional callback invoked from sensor task on tap interrupt (may be NULL). */
+void bma456_set_tap_handler(bma456_tap_handler_t handler, void *ctx);
+
+/** On-demand read of current accel XYZ (raw LSB). Returns ESP_ERR_INVALID_STATE if sensor not ready. */
+esp_err_t bma456_read_accel(int16_t *x, int16_t *y, int16_t *z);
+
 #endif

main/client_registry.c

@@ -1,4 +1,5 @@
 #include "client_registry.h"
+#include "pod_settings.h"
 #include "esp_log.h"
 #include "freertos/FreeRTOS.h"
 #include "freertos/idf_additions.h"
@@ -13,6 +14,67 @@ typedef struct {
 } client_slot_t;
 
 static client_slot_t s_clients[CLIENT_REGISTRY_MAX];
+static pod_id_map_t s_id_map;
+
+static struct {
+  board_lipo_reading_t reading;
+  uint32_t updated_at;
+} s_master_battery;
+
+static bool id_in_use(uint32_t id, const uint8_t *except_mac) {
+  for (uint8_t i = 0; i < s_id_map.count; i++) {
+    if (s_id_map.entries[i].id != id) {
+      continue;
+    }
+    if (except_mac != NULL &&
+        memcmp(s_id_map.entries[i].mac, except_mac, CLIENT_MAC_LEN) == 0) {
+      continue;
+    }
+    return true;
+  }
+  return false;
+}
+
+static int find_map_index(const uint8_t mac[CLIENT_MAC_LEN]) {
+  for (uint8_t i = 0; i < s_id_map.count; i++) {
+    if (memcmp(s_id_map.entries[i].mac, mac, CLIENT_MAC_LEN) == 0) {
+      return (int)i;
+    }
+  }
+  return -1;
+}
+
+static esp_err_t persist_id_map(void) {
+  return pod_settings_save_id_map(&s_id_map);
+}
+
+static uint32_t alloc_next_free_id(void) {
+  if (s_id_map.count >= POD_ID_MAP_MAX) {
+    return 0;
+  }
+  uint8_t start = s_id_map.next_id;
+  if (start < POD_CLIENT_ID_MIN) {
+    start = (uint8_t)POD_CLIENT_ID_MIN;
+  }
+  for (uint32_t n = 0; n < POD_CLIENT_ID_MAX; n++) {
+    uint32_t id = (uint32_t)start + n;
+    if (id > POD_CLIENT_ID_MAX) {
+      id = id - POD_CLIENT_ID_MAX;
+    }
+    if (id < POD_CLIENT_ID_MIN) {
+      continue;
+    }
+    if (!id_in_use(id, NULL)) {
+      uint32_t next = id + 1;
+      if (next > POD_CLIENT_ID_MAX) {
+        next = POD_CLIENT_ID_MIN;
+      }
+      s_id_map.next_id = (uint8_t)next;
+      return id;
+    }
+  }
+  return 0;
+}
 
 uint32_t client_registry_now_ms(void) {
   return (uint32_t)(xTaskGetTickCount() * portTICK_PERIOD_MS);
@@ -77,6 +139,11 @@ static client_slot_t *alloc_slot(const uint8_t mac[CLIENT_MAC_LEN],
       slot->active = true;
       memcpy(slot->info.mac, mac, CLIENT_MAC_LEN);
       slot->info.accel_deadzone = CLIENT_REGISTRY_DEFAULT_ACCEL_DEADZONE;
+      {
+        static const bma456_tap_config_t k_tap_default = BMA456_TAP_CONFIG_DEFAULT;
+        slot->info.tap_config = k_tap_default;
+      }
+      slot->info.uv_protection_enabled = false;
       if (out_is_new != NULL) {
         *out_is_new = true;
       }
@@ -86,7 +153,84 @@ static client_slot_t *alloc_slot(const uint8_t mac[CLIENT_MAC_LEN],
   return NULL;
 }
 
-void client_registry_init(void) { memset(s_clients, 0, sizeof(s_clients)); }
+void client_registry_init(void) {
+  memset(s_clients, 0, sizeof(s_clients));
+  memset(&s_id_map, 0, sizeof(s_id_map));
+  s_id_map.next_id = (uint8_t)POD_CLIENT_ID_MIN;
+  (void)pod_settings_load_id_map(&s_id_map);
+  if (s_id_map.next_id < POD_CLIENT_ID_MIN) {
+    s_id_map.next_id = (uint8_t)POD_CLIENT_ID_MIN;
+  }
+}
+
+esp_err_t client_registry_assign_id(const uint8_t mac[CLIENT_MAC_LEN],
+                                    uint32_t preferred_id, uint32_t *out_id) {
+  if (mac == NULL || out_id == NULL) {
+    return ESP_ERR_INVALID_ARG;
+  }
+
+  int idx = find_map_index(mac);
+  if (idx >= 0) {
+    *out_id = s_id_map.entries[idx].id;
+    return ESP_OK;
+  }
+
+  uint32_t id = 0;
+  if (preferred_id >= POD_CLIENT_ID_MIN && preferred_id <= POD_CLIENT_ID_MAX &&
+      !id_in_use(preferred_id, mac)) {
+    id = preferred_id;
+  } else {
+    id = alloc_next_free_id();
+  }
+  if (id == 0) {
+    return ESP_ERR_NO_MEM;
+  }
+
+  if (s_id_map.count >= POD_ID_MAP_MAX) {
+    return ESP_ERR_NO_MEM;
+  }
+
+  memcpy(s_id_map.entries[s_id_map.count].mac, mac, CLIENT_MAC_LEN);
+  s_id_map.entries[s_id_map.count].id = (uint8_t)id;
+  s_id_map.count++;
+  if (id >= s_id_map.next_id) {
+    uint32_t next = id + 1;
+    if (next > POD_CLIENT_ID_MAX) {
+      next = POD_CLIENT_ID_MIN;
+    }
+    s_id_map.next_id = (uint8_t)next;
+  }
+
+  esp_err_t err = persist_id_map();
+  if (err != ESP_OK) {
+    ESP_LOGW(TAG, "persist id_map failed after assign id=%lu: %s",
+             (unsigned long)id, esp_err_to_name(err));
+  }
+  *out_id = id;
+  return ESP_OK;
+}
+
+void client_registry_clear_id_map(void) {
+  memset(s_clients, 0, sizeof(s_clients));
+  memset(&s_id_map, 0, sizeof(s_id_map));
+  s_id_map.next_id = (uint8_t)POD_CLIENT_ID_MIN;
+  esp_err_t err = pod_settings_clear_id_map();
+  if (err != ESP_OK) {
+    ESP_LOGW(TAG, "clear id_map NVS failed: %s", esp_err_to_name(err));
+  }
+  ESP_LOGI(TAG, "cleared id map and live registry");
+}
+
+void client_registry_mark_assign_sent(const uint8_t mac[CLIENT_MAC_LEN]) {
+  if (mac == NULL) {
+    return;
+  }
+  client_slot_t *slot = find_slot(mac);
+  if (slot == NULL) {
+    return;
+  }
+  slot->info.last_assign_sent_at = now_ms();
+}
 
 const client_info_t *
 client_registry_find_by_mac(const uint8_t mac[CLIENT_MAC_LEN]) {
@@ -162,18 +306,19 @@ void client_registry_check_timeouts(uint32_t timeout_ms) {
   uint32_t now = now_ms();
 
   for (size_t i = 0; i < CLIENT_REGISTRY_MAX; i++) {
-    if (!s_clients[i].active || !s_clients[i].info.available) {
+    if (!s_clients[i].active) {
       continue;
     }
 
     uint32_t elapsed = now - s_clients[i].info.last_success_ping_at;
     if (elapsed > timeout_ms) {
-      s_clients[i].info.available = false;
       char mac_str[18];
       mac_to_str(s_clients[i].info.mac, mac_str, sizeof(mac_str));
-      ESP_LOGW(TAG, "client inactive id=%lu mac=%s (no heartbeat for %lu ms)",
+      ESP_LOGW(TAG, "client dropped id=%lu mac=%s (no heartbeat for %lu ms)",
                (unsigned long)s_clients[i].info.id, mac_str,
                (unsigned long)elapsed);
+      s_clients[i].active = false;
+      memset(&s_clients[i].info, 0, sizeof(s_clients[i].info));
     }
   }
 }
@@ -241,6 +386,362 @@ size_t client_registry_set_accel_deadzone_all(uint32_t deadzone) {
   return n;
 }
 
+esp_err_t client_registry_set_tap_config(uint32_t client_id,
+                                         const bma456_tap_config_t *cfg) {
+  if (cfg == NULL || !bma456_tap_config_valid(cfg)) {
+    return ESP_ERR_INVALID_ARG;
+  }
+  const client_info_t *info = client_registry_find_by_id(client_id);
+  if (info == NULL) {
+    return ESP_ERR_NOT_FOUND;
+  }
+
+  for (size_t i = 0; i < CLIENT_REGISTRY_MAX; i++) {
+    if (s_clients[i].active && s_clients[i].info.id == client_id) {
+      s_clients[i].info.tap_config = *cfg;
+      return ESP_OK;
+    }
+  }
+  return ESP_ERR_NOT_FOUND;
+}
+
+esp_err_t client_registry_get_tap_config(uint32_t client_id,
+                                         bma456_tap_config_t *cfg_out) {
+  if (cfg_out == NULL) {
+    return ESP_ERR_INVALID_ARG;
+  }
+
+  const client_info_t *info = client_registry_find_by_id(client_id);
+  if (info == NULL) {
+    return ESP_ERR_NOT_FOUND;
+  }
+
+  *cfg_out = info->tap_config;
+  return ESP_OK;
+}
+
+size_t client_registry_set_tap_config_all(const bma456_tap_config_t *cfg) {
+  if (cfg == NULL || !bma456_tap_config_valid(cfg)) {
+    return 0;
+  }
+  size_t n = 0;
+
+  for (size_t i = 0; i < CLIENT_REGISTRY_MAX; i++) {
+    if (!s_clients[i].active) {
+      continue;
+    }
+    s_clients[i].info.tap_config = *cfg;
+    n++;
+  }
+  return n;
+}
+
+esp_err_t client_registry_set_uv_protection(uint32_t client_id, bool enabled) {
+  for (size_t i = 0; i < CLIENT_REGISTRY_MAX; i++) {
+    if (s_clients[i].active && s_clients[i].info.id == client_id) {
+      s_clients[i].info.uv_protection_enabled = enabled;
+      return ESP_OK;
+    }
+  }
+  return ESP_ERR_NOT_FOUND;
+}
+
+esp_err_t client_registry_get_uv_protection(uint32_t client_id,
+                                            bool *enabled_out) {
+  if (enabled_out == NULL) {
+    return ESP_ERR_INVALID_ARG;
+  }
+  const client_info_t *info = client_registry_find_by_id(client_id);
+  if (info == NULL) {
+    return ESP_ERR_NOT_FOUND;
+  }
+  *enabled_out = info->uv_protection_enabled;
+  return ESP_OK;
+}
+
+size_t client_registry_set_uv_protection_all(bool enabled) {
+  size_t n = 0;
+  for (size_t i = 0; i < CLIENT_REGISTRY_MAX; i++) {
+    if (!s_clients[i].active) {
+      continue;
+    }
+    s_clients[i].info.uv_protection_enabled = enabled;
+    n++;
+  }
+  return n;
+}
+
+static void clear_client_accel(client_slot_t *slot) {
+  if (slot == NULL) {
+    return;
+  }
+  slot->info.accel_valid = false;
+  slot->info.accel_x = 0;
+  slot->info.accel_y = 0;
+  slot->info.accel_z = 0;
+  slot->info.accel_updated_at = 0;
+}
+
+static void clear_client_tap(client_slot_t *slot) {
+  if (slot == NULL) {
+    return;
+  }
+  slot->info.tap_valid = false;
+  slot->info.tap_kind = 0;
+  slot->info.tap_updated_at = 0;
+}
+
+static bool tap_kind_enabled(const client_info_t *info, uint32_t kind) {
+  if (info == NULL) {
+    return false;
+  }
+  switch (kind) {
+  case 1:
+    return info->tap_notify_single;
+  case 2:
+    return info->tap_notify_double;
+  case 3:
+    return info->tap_notify_triple;
+  default:
+    return false;
+  }
+}
+
+esp_err_t client_registry_set_accel_stream(uint32_t client_id, bool enabled) {
+  for (size_t i = 0; i < CLIENT_REGISTRY_MAX; i++) {
+    if (!s_clients[i].active || s_clients[i].info.id != client_id) {
+      continue;
+    }
+    s_clients[i].info.accel_stream_enabled = enabled;
+    if (!enabled) {
+      clear_client_accel(&s_clients[i]);
+    }
+    return ESP_OK;
+  }
+  return ESP_ERR_NOT_FOUND;
+}
+
+esp_err_t client_registry_get_accel_stream(uint32_t client_id,
+                                           bool *enabled_out) {
+  if (enabled_out == NULL) {
+    return ESP_ERR_INVALID_ARG;
+  }
+  const client_info_t *info = client_registry_find_by_id(client_id);
+  if (info == NULL) {
+    return ESP_ERR_NOT_FOUND;
+  }
+  *enabled_out = info->accel_stream_enabled;
+  return ESP_OK;
+}
+
+size_t client_registry_set_accel_stream_all(bool enabled) {
+  size_t n = 0;
+  for (size_t i = 0; i < CLIENT_REGISTRY_MAX; i++) {
+    if (!s_clients[i].active) {
+      continue;
+    }
+    s_clients[i].info.accel_stream_enabled = enabled;
+    if (!enabled) {
+      clear_client_accel(&s_clients[i]);
+    }
+    n++;
+  }
+  return n;
+}
+
+esp_err_t client_registry_update_accel(const uint8_t mac[CLIENT_MAC_LEN],
+                                       uint32_t slave_id, int16_t x, int16_t y,
+                                       int16_t z) {
+  if (mac == NULL) {
+    return ESP_ERR_INVALID_ARG;
+  }
+
+  client_slot_t *slot = find_slot(mac);
+  if (slot == NULL) {
+    return ESP_ERR_NOT_FOUND;
+  }
+  if (slot->info.id != slave_id) {
+    return ESP_ERR_INVALID_ARG;
+  }
+  if (!slot->info.accel_stream_enabled) {
+    return ESP_ERR_INVALID_STATE;
+  }
+
+  slot->info.accel_x = x;
+  slot->info.accel_y = y;
+  slot->info.accel_z = z;
+  slot->info.accel_valid = true;
+  slot->info.accel_updated_at = now_ms();
+  return ESP_OK;
+}
+
+esp_err_t client_registry_set_tap_notify(uint32_t client_id, bool single,
+                                         bool double_tap, bool triple) {
+  for (size_t i = 0; i < CLIENT_REGISTRY_MAX; i++) {
+    if (!s_clients[i].active || s_clients[i].info.id != client_id) {
+      continue;
+    }
+    s_clients[i].info.tap_notify_single = single;
+    s_clients[i].info.tap_notify_double = double_tap;
+    s_clients[i].info.tap_notify_triple = triple;
+    if (!single && !double_tap && !triple) {
+      clear_client_tap(&s_clients[i]);
+    }
+    return ESP_OK;
+  }
+  return ESP_ERR_NOT_FOUND;
+}
+
+esp_err_t client_registry_get_tap_notify(uint32_t client_id, bool *single_out,
+                                         bool *double_tap_out,
+                                         bool *triple_out) {
+  if (single_out == NULL || double_tap_out == NULL || triple_out == NULL) {
+    return ESP_ERR_INVALID_ARG;
+  }
+  const client_info_t *info = client_registry_find_by_id(client_id);
+  if (info == NULL) {
+    return ESP_ERR_NOT_FOUND;
+  }
+  *single_out = info->tap_notify_single;
+  *double_tap_out = info->tap_notify_double;
+  *triple_out = info->tap_notify_triple;
+  return ESP_OK;
+}
+
+size_t client_registry_set_tap_notify_all(bool single, bool double_tap,
+                                          bool triple) {
+  size_t n = 0;
+  for (size_t i = 0; i < CLIENT_REGISTRY_MAX; i++) {
+    if (!s_clients[i].active) {
+      continue;
+    }
+    s_clients[i].info.tap_notify_single = single;
+    s_clients[i].info.tap_notify_double = double_tap;
+    s_clients[i].info.tap_notify_triple = triple;
+    if (!single && !double_tap && !triple) {
+      clear_client_tap(&s_clients[i]);
+    }
+    n++;
+  }
+  return n;
+}
+
+esp_err_t client_registry_update_tap(const uint8_t mac[CLIENT_MAC_LEN],
+                                     uint32_t slave_id, uint32_t kind) {
+  if (mac == NULL || kind < 1 || kind > 3) {
+    return ESP_ERR_INVALID_ARG;
+  }
+
+  client_slot_t *slot = find_slot(mac);
+  if (slot == NULL) {
+    return ESP_ERR_NOT_FOUND;
+  }
+  if (slot->info.id != slave_id) {
+    return ESP_ERR_INVALID_ARG;
+  }
+  if (!tap_kind_enabled(&slot->info, kind)) {
+    return ESP_ERR_INVALID_STATE;
+  }
+
+  slot->info.tap_kind = kind;
+  slot->info.tap_valid = true;
+  slot->info.tap_updated_at = now_ms();
+  return ESP_OK;
+}
+
+void client_registry_expire_tap(client_info_t *info) {
+  if (info == NULL || !info->tap_valid) {
+    return;
+  }
+  if (client_registry_ms_since(info->tap_updated_at) >
+      CLIENT_REGISTRY_TAP_MAX_AGE_MS) {
+    info->tap_valid = false;
+    info->tap_kind = 0;
+    info->tap_updated_at = 0;
+  }
+}
+
+void client_registry_clear_tap(client_info_t *info) {
+  if (info == NULL) {
+    return;
+  }
+  info->tap_valid = false;
+  info->tap_kind = 0;
+  info->tap_updated_at = 0;
+}
+
+bool client_registry_take_tap(uint32_t client_id, uint32_t *kind_out,
+                              uint32_t *age_ms_out) {
+  for (size_t i = 0; i < CLIENT_REGISTRY_MAX; i++) {
+    if (!s_clients[i].active || s_clients[i].info.id != client_id) {
+      continue;
+    }
+    client_info_t *info = &s_clients[i].info;
+    client_registry_expire_tap(info);
+    if (!info->tap_valid) {
+      return false;
+    }
+    if (kind_out != NULL) {
+      *kind_out = info->tap_kind;
+    }
+    if (age_ms_out != NULL) {
+      *age_ms_out = client_registry_ms_since(info->tap_updated_at);
+    }
+    client_registry_clear_tap(info);
+    return true;
+  }
+  return false;
+}
+
+void client_registry_set_master_battery(const board_lipo_reading_t *reading) {
+  if (reading == NULL) {
+    return;
+  }
+  s_master_battery.reading = *reading;
+  s_master_battery.updated_at = now_ms();
+}
+
+bool client_registry_get_master_battery(board_lipo_reading_t *reading_out,
+                                        uint32_t *age_ms_out) {
+  if (reading_out == NULL) {
+    return false;
+  }
+  *reading_out = s_master_battery.reading;
+  if (age_ms_out != NULL) {
+    *age_ms_out = client_registry_ms_since(s_master_battery.updated_at);
+  }
+  return s_master_battery.updated_at != 0;
+}
+
+esp_err_t client_registry_update_battery(const uint8_t mac[CLIENT_MAC_LEN],
+                                         uint32_t slave_id, bool lipo1_valid,
+                                         uint32_t lipo1_mv, bool lipo2_valid,
+                                         uint32_t lipo2_mv) {
+  if (mac == NULL) {
+    return ESP_ERR_INVALID_ARG;
+  }
+
+  client_slot_t *slot = find_slot(mac);
+  if (slot == NULL) {
+    /* Ids are assigned on presence only; ignore early battery reports. */
+    return ESP_ERR_NOT_FOUND;
+  }
+
+  if (slave_id != 0 && slot->info.id != slave_id) {
+    ESP_LOGW(TAG, "battery id mismatch slot=%lu report=%lu mac %02x:…:%02x",
+             (unsigned long)slot->info.id, (unsigned long)slave_id, mac[0],
+             mac[5]);
+    return ESP_ERR_INVALID_STATE;
+  }
+
+  slot->info.lipo1_valid = lipo1_valid;
+  slot->info.lipo2_valid = lipo2_valid;
+  slot->info.lipo1_mv = lipo1_mv;
+  slot->info.lipo2_mv = lipo2_mv;
+  slot->info.battery_updated_at = now_ms();
+  return ESP_OK;
+}
+
 const client_info_t *client_registry_at(size_t index) {
   size_t n = 0;
   for (size_t i = 0; i < CLIENT_REGISTRY_MAX; i++) {

main/client_registry.h

@@ -1,6 +1,8 @@
 #ifndef CLIENT_REGISTRY_H
 #define CLIENT_REGISTRY_H
 
+#include "board_input.h"
+#include "bosch456.h"
 #include "esp_err.h"
 #include <stdbool.h>
 #include <stddef.h>
@@ -21,12 +23,59 @@ typedef struct {
   uint32_t version;
   /** Accel deadzone in raw LSB per axis (master copy for ESP-NOW config). */
   uint32_t accel_deadzone;
+  /** Tap detection config (master copy for ESP-NOW / UART read). */
+  bma456_tap_config_t tap_config;
+  /** Latest accel from slave ESP-NOW stream (master only). */
+  bool accel_valid;
+  int16_t accel_x;
+  int16_t accel_y;
+  int16_t accel_z;
+  uint32_t accel_updated_at;
+  /** Host-enabled ESP-NOW accel stream to master. */
+  bool accel_stream_enabled;
+  /** Host-enabled ESP-NOW tap notify flags. */
+  bool tap_notify_single;
+  bool tap_notify_double;
+  bool tap_notify_triple;
+  /** Latest tap from slave ESP-NOW (master only, short-lived cache). */
+  bool tap_valid;
+  uint32_t tap_kind;
+  uint32_t tap_updated_at;
+  /** Latest LiPo ADC from slave ESP-NOW battery report (~30 s). */
+  bool lipo1_valid;
+  bool lipo2_valid;
+  uint32_t lipo1_mv;
+  uint32_t lipo2_mv;
+  uint32_t battery_updated_at;
+  /** Master cache: software UV protection enabled on slave (default false). */
+  bool uv_protection_enabled;
+  /** Master: last ESPNOW_ASSIGN_ID send time (rate-limit resends). */
+  uint32_t last_assign_sent_at;
 } client_info_t;
 
 #define CLIENT_REGISTRY_DEFAULT_ACCEL_DEADZONE 100u
+/** Tap events older than this are discarded (matches accel stream interval). */
+#define CLIENT_REGISTRY_TAP_MAX_AGE_MS 10u
 
 void client_registry_init(void);
 
+/**
+ * Assign a stable logical id for mac (1…255). Honors preferred if free or
+ * already owned by mac; otherwise allocates the next free id. Persists the
+ * master id map to NVS.
+ */
+esp_err_t client_registry_assign_id(const uint8_t mac[CLIENT_MAC_LEN],
+                                    uint32_t preferred_id, uint32_t *out_id);
+
+/**
+ * Clear NVS id map, RAM map, and all live registry slots. Does not notify
+ * slaves (caller sends CLEAR_ID_BINDING).
+ */
+void client_registry_clear_id_map(void);
+
+/** Record that ASSIGN_ID was sent to this MAC (for resend rate limiting). */
+void client_registry_mark_assign_sent(const uint8_t mac[CLIENT_MAC_LEN]);
+
 /** Milliseconds since boot (same clock as stored ping timestamps). */
 uint32_t client_registry_now_ms(void);
 
@@ -47,7 +96,10 @@ esp_err_t client_registry_heartbeat(const uint8_t mac[CLIENT_MAC_LEN],
                                     uint32_t id, uint32_t version, bool used,
                                     bool *out_is_new, bool *out_reactivated);
 
-/** Mark clients inactive when last_success_ping_at is older than timeout_ms. */
+/**
+ * Drop live registry slots whose last_success_ping_at is older than
+ * timeout_ms (NVS id map unchanged). Offline clients disappear from CLIENT_INFO.
+ */
 void client_registry_check_timeouts(uint32_t timeout_ms);
 
 size_t client_registry_count(void);
@@ -63,4 +115,60 @@ esp_err_t client_registry_get_accel_deadzone(uint32_t client_id,
 /** Push deadzone to all active registry entries; returns count updated. */
 size_t client_registry_set_accel_deadzone_all(uint32_t deadzone);
 
+esp_err_t client_registry_set_tap_config(uint32_t client_id,
+                                         const bma456_tap_config_t *cfg);
+esp_err_t client_registry_get_tap_config(uint32_t client_id,
+                                         bma456_tap_config_t *cfg_out);
+size_t client_registry_set_tap_config_all(const bma456_tap_config_t *cfg);
+
+esp_err_t client_registry_set_uv_protection(uint32_t client_id, bool enabled);
+esp_err_t client_registry_get_uv_protection(uint32_t client_id,
+                                            bool *enabled_out);
+size_t client_registry_set_uv_protection_all(bool enabled);
+
+/** Store latest accel sample from a slave (matched by sender MAC). */
+esp_err_t client_registry_update_accel(const uint8_t mac[CLIENT_MAC_LEN],
+                                       uint32_t slave_id, int16_t x, int16_t y,
+                                       int16_t z);
+
+esp_err_t client_registry_set_accel_stream(uint32_t client_id, bool enabled);
+esp_err_t client_registry_get_accel_stream(uint32_t client_id, bool *enabled_out);
+size_t client_registry_set_accel_stream_all(bool enabled);
+
+esp_err_t client_registry_set_tap_notify(uint32_t client_id, bool single,
+                                         bool double_tap, bool triple);
+esp_err_t client_registry_get_tap_notify(uint32_t client_id, bool *single_out,
+                                         bool *double_tap_out,
+                                         bool *triple_out);
+size_t client_registry_set_tap_notify_all(bool single, bool double_tap,
+                                          bool triple);
+
+/** Store tap event from slave (matched by sender MAC). kind: 1=single, 2=double, 3=triple. */
+esp_err_t client_registry_update_tap(const uint8_t mac[CLIENT_MAC_LEN],
+                                     uint32_t slave_id, uint32_t kind);
+
+/** Drop cached tap if older than CLIENT_REGISTRY_TAP_MAX_AGE_MS. */
+void client_registry_expire_tap(client_info_t *info);
+
+/** Clear cached tap after UART snapshot or expiry. */
+void client_registry_clear_tap(client_info_t *info);
+
+/**
+ * If client has a fresh tap (age <= CLIENT_REGISTRY_TAP_MAX_AGE_MS), copy it out
+ * and clear the cache. Returns true when an event was returned.
+ */
+bool client_registry_take_tap(uint32_t client_id, uint32_t *kind_out,
+                              uint32_t *age_ms_out);
+
+/** Master local LiPo (client_id 0 in UART battery responses). */
+void client_registry_set_master_battery(const board_lipo_reading_t *reading);
+bool client_registry_get_master_battery(board_lipo_reading_t *reading_out,
+                                        uint32_t *age_ms_out);
+
+/** Store latest battery report from a slave (matched by sender MAC). */
+esp_err_t client_registry_update_battery(const uint8_t mac[CLIENT_MAC_LEN],
+                                         uint32_t slave_id, bool lipo1_valid,
+                                         uint32_t lipo1_mv, bool lipo2_valid,
+                                         uint32_t lipo2_mv);
+
 #endif

main/cmd/cmd_accel_deadzone.c

@@ -3,6 +3,7 @@
 #include "cmd_accel_deadzone.h"
 #include "esp_log.h"
 #include "esp_now_comm.h"
+#include "pod_settings.h"
 #include "uart_cmd.h"
 
 static const char *TAG = "[ACCEL_DZ]";
@@ -19,6 +20,14 @@ static void reply(uint32_t deadzone, uint32_t client_id, bool success,
   uart_cmd_send(&response, TAG);
 }
 
+static void apply_local_deadzone(uint32_t deadzone) {
+  bma456_set_accel_deadzone(deadzone);
+  if (pod_settings_save_accel_deadzone(deadzone) != ESP_OK) {
+    ESP_LOGW(TAG, "deadzone %lu applied but not saved to NVS",
+             (unsigned long)deadzone);
+  }
+}
+
 static esp_err_t push_deadzone_to_slave(const client_info_t *client,
                                         uint32_t deadzone) {
   if (client == NULL) {
@@ -67,7 +76,7 @@ static void handle_accel_deadzone(const uint8_t *data, size_t len) {
       }
 
       if (bma456_is_ready()) {
-        bma456_set_accel_deadzone(req.deadzone);
+        apply_local_deadzone(req.deadzone);
       }
 
       ESP_LOGI(TAG, "set deadzone %lu via unicast to %u/%u slaves",
@@ -77,7 +86,7 @@ static void handle_accel_deadzone(const uint8_t *data, size_t len) {
     }
 
     if (req.client_id == 0) {
-      bma456_set_accel_deadzone(req.deadzone);
+      apply_local_deadzone(req.deadzone);
       ESP_LOGI(TAG, "set local deadzone %lu (no ESP-NOW; use -client or -all "
                     "for slaves)",
                (unsigned long)req.deadzone);

main/cmd/cmd_accel_stream.c

@@ -0,0 +1,112 @@
+#include "client_registry.h"
+#include "cmd_accel_stream.h"
+#include "ble_stream.h"
+#include "esp_log.h"
+#include "esp_now_comm.h"
+#include "uart_cmd.h"
+
+static const char *TAG = "[ACCEL_STREAM]";
+
+static void reply(bool enabled, uint32_t client_id, bool success,
+                  uint32_t slaves_updated) {
+  alox_UartMessage response;
+  uart_cmd_init_response(&response, alox_MessageType_ACCEL_STREAM,
+                         alox_UartMessage_accel_stream_response_tag);
+  response.payload.accel_stream_response.enabled = enabled;
+  response.payload.accel_stream_response.client_id = client_id;
+  response.payload.accel_stream_response.success = success;
+  response.payload.accel_stream_response.slaves_updated = slaves_updated;
+  uart_cmd_send(&response, TAG);
+}
+
+static esp_err_t push_stream_to_slave(const client_info_t *client, bool enable) {
+  if (client == NULL) {
+    return ESP_ERR_INVALID_ARG;
+  }
+  esp_err_t err = client_registry_set_accel_stream(client->id, enable);
+  if (err != ESP_OK) {
+    return err;
+  }
+  return esp_now_comm_send_accel_stream(client->mac, client->id, enable);
+}
+
+static void handle_accel_stream(const uint8_t *data, size_t len) {
+  alox_UartMessage uart_msg;
+  alox_AccelStreamRequest req = alox_AccelStreamRequest_init_zero;
+
+  if (len > 0) {
+    if (uart_cmd_decode(data, len, &uart_msg) != ESP_OK) {
+      ESP_LOGW(TAG, "decode failed");
+      reply(false, 0, false, 0);
+      return;
+    }
+    const alox_AccelStreamRequest *req_ptr = UART_CMD_REQ(
+        &uart_msg, alox_UartMessage_accel_stream_request_tag, accel_stream_request);
+    if (req_ptr == NULL) {
+      ESP_LOGW(TAG, "missing accel_stream_request");
+      reply(false, 0, false, 0);
+      return;
+    }
+    req = *req_ptr;
+  }
+
+  if (req.write) {
+    if (req.period_ms != 0) {
+      ble_stream_set_period_ms(req.period_ms);
+    }
+
+    if (req.all_clients) {
+      size_t n = client_registry_set_accel_stream_all(req.enable);
+      uint32_t sent = 0;
+
+      for (size_t i = 0; i < client_registry_count(); i++) {
+        const client_info_t *client = client_registry_at(i);
+        if (client == NULL) {
+          continue;
+        }
+        if (esp_now_comm_send_accel_stream(client->mac, client->id,
+                                           req.enable) == ESP_OK) {
+          sent++;
+        }
+      }
+
+      ESP_LOGI(TAG, "accel stream %s for %u/%u slaves period_ms=%lu",
+               req.enable ? "on" : "off", (unsigned)sent, (unsigned)n,
+               (unsigned long)ble_stream_period_ms());
+      ble_stream_update();
+      reply(req.enable, 0, sent > 0, sent);
+      return;
+    }
+
+    if (req.client_id == 0) {
+      ESP_LOGW(TAG, "client_id required (or all_clients)");
+      reply(req.enable, 0, false, 0);
+      return;
+    }
+
+    const client_info_t *client = client_registry_find_by_id(req.client_id);
+    if (client == NULL) {
+      ESP_LOGW(TAG, "client id %lu not found", (unsigned long)req.client_id);
+      reply(req.enable, req.client_id, false, 0);
+      return;
+    }
+
+    esp_err_t err = push_stream_to_slave(client, req.enable);
+    ble_stream_update();
+    reply(req.enable, req.client_id, err == ESP_OK, err == ESP_OK ? 1u : 0u);
+    return;
+  }
+
+  if (req.all_clients || req.client_id == 0) {
+    reply(false, 0, false, 0);
+    return;
+  }
+
+  bool enabled = false;
+  esp_err_t err = client_registry_get_accel_stream(req.client_id, &enabled);
+  reply(enabled, req.client_id, err == ESP_OK, 0);
+}
+
+void cmd_accel_stream_register(void) {
+  uart_cmd_register(alox_MessageType_ACCEL_STREAM, handle_accel_stream);
+}

main/cmd/cmd_accel_stream.h

@@ -0,0 +1,6 @@
+#ifndef CMD_ACCEL_STREAM_H
+#define CMD_ACCEL_STREAM_H
+
+void cmd_accel_stream_register(void);
+
+#endif

main/cmd/cmd_battery.c

@@ -0,0 +1,129 @@
+#include "cmd_battery.h"
+#include "board_input.h"
+#include "client_registry.h"
+#include "esp_log.h"
+#include "uart_cmd.h"
+
+static const char *TAG = "[BATTERY]";
+
+static void fill_lipo(alox_LipoReading *dst, bool *has_dst, bool valid,
+                      uint32_t mv) {
+  if (dst == NULL || has_dst == NULL) {
+    return;
+  }
+  *has_dst = true;
+  dst->valid = valid;
+  dst->voltage_mv = valid ? mv : 0;
+}
+
+static bool append_battery_sample(alox_BatteryStatusResponse *resp,
+                                  uint32_t client_id, bool lipo1_valid,
+                                  uint32_t lipo1_mv, bool lipo2_valid,
+                                  uint32_t lipo2_mv, uint32_t age_ms) {
+  if (resp->samples_count >=
+      sizeof(resp->samples) / sizeof(resp->samples[0])) {
+    return false;
+  }
+
+  alox_BatterySample *sample = &resp->samples[resp->samples_count++];
+  sample->client_id = client_id;
+  fill_lipo(&sample->lipo1, &sample->has_lipo1, lipo1_valid, lipo1_mv);
+  fill_lipo(&sample->lipo2, &sample->has_lipo2, lipo2_valid, lipo2_mv);
+  sample->age_ms = age_ms;
+  return lipo1_valid || lipo2_valid;
+}
+
+static bool append_master_sample(alox_BatteryStatusResponse *resp) {
+  board_lipo_reading_t reading;
+
+  board_input_read_lipo(&reading);
+  client_registry_set_master_battery(&reading);
+
+  return append_battery_sample(resp, 0, reading.lipo1_valid, reading.lipo1_mv,
+                               reading.lipo2_valid, reading.lipo2_mv, 0);
+}
+
+static bool append_slave_cached(alox_BatteryStatusResponse *resp,
+                                const client_info_t *client) {
+  if (client == NULL) {
+    return false;
+  }
+  if (client->battery_updated_at == 0) {
+    return false;
+  }
+
+  return append_battery_sample(
+      resp, client->id, client->lipo1_valid, client->lipo1_mv,
+      client->lipo2_valid, client->lipo2_mv,
+      client_registry_ms_since(client->battery_updated_at));
+}
+
+static void handle_battery_status(const uint8_t *data, size_t len) {
+  alox_BatteryStatusRequest req = alox_BatteryStatusRequest_init_zero;
+
+  if (len > 0) {
+    alox_UartMessage uart_msg;
+    if (uart_cmd_decode(data, len, &uart_msg) != ESP_OK) {
+      ESP_LOGW(TAG, "decode failed");
+      alox_UartMessage response;
+      uart_cmd_init_response(&response, alox_MessageType_BATTERY_STATUS,
+                             alox_UartMessage_battery_status_response_tag);
+      response.payload.battery_status_response.success = false;
+      uart_cmd_send(&response, TAG);
+      return;
+    }
+    const alox_BatteryStatusRequest *req_ptr = UART_CMD_REQ(
+        &uart_msg, alox_UartMessage_battery_status_request_tag,
+        battery_status_request);
+    if (req_ptr == NULL) {
+      ESP_LOGW(TAG, "missing battery_status_request");
+      alox_UartMessage response;
+      uart_cmd_init_response(&response, alox_MessageType_BATTERY_STATUS,
+                             alox_UartMessage_battery_status_response_tag);
+      response.payload.battery_status_response.success = false;
+      uart_cmd_send(&response, TAG);
+      return;
+    }
+    req = *req_ptr;
+  }
+
+  alox_UartMessage response;
+  uart_cmd_init_response(&response, alox_MessageType_BATTERY_STATUS,
+                         alox_UartMessage_battery_status_response_tag);
+  alox_BatteryStatusResponse *resp =
+      &response.payload.battery_status_response;
+  resp->success = false;
+  resp->samples_count = 0;
+
+  bool any = false;
+
+  if (req.all_clients) {
+    any |= append_master_sample(resp);
+    for (size_t i = 0; i < client_registry_count(); i++) {
+      const client_info_t *client = client_registry_at(i);
+      if (client == NULL) {
+        continue;
+      }
+      any |= append_slave_cached(resp, client);
+    }
+    ESP_LOGI(TAG, "battery cache all_clients → %u samples",
+             (unsigned)resp->samples_count);
+  } else if (req.client_id == 0) {
+    any = append_master_sample(resp);
+    ESP_LOGI(TAG, "battery cache master");
+  } else {
+    const client_info_t *client = client_registry_find_by_id(req.client_id);
+    if (client != NULL) {
+      any = append_slave_cached(resp, client);
+    } else {
+      ESP_LOGW(TAG, "client %lu not in registry", (unsigned long)req.client_id);
+    }
+  }
+
+  resp->success = any;
+  uart_cmd_send(&response, TAG);
+}
+
+void cmd_battery_register(void) {
+  uart_cmd_register(alox_MessageType_BATTERY_STATUS, handle_battery_status);
+}

main/cmd/cmd_battery.h

@@ -0,0 +1,6 @@
+#ifndef CMD_BATTERY_H
+#define CMD_BATTERY_H
+
+void cmd_battery_register(void);
+
+#endif

main/cmd/cmd_battery_uv.c

@@ -0,0 +1,118 @@
+#include "cmd_battery_uv.h"
+#include "client_registry.h"
+#include "esp_log.h"
+#include "esp_now_comm.h"
+#include "pod_settings.h"
+#include "uart_cmd.h"
+
+static const char *TAG = "[BATTERY_UV_CMD]";
+
+static void reply(uint32_t client_id, bool success, bool enabled, bool latched,
+                  uint32_t slaves_updated) {
+  alox_UartMessage response;
+  uart_cmd_init_response(&response, alox_MessageType_BATTERY_UV,
+                         alox_UartMessage_battery_uv_response_tag);
+  response.payload.battery_uv_response.client_id = client_id;
+  response.payload.battery_uv_response.success = success;
+  response.payload.battery_uv_response.enabled = enabled;
+  response.payload.battery_uv_response.latched = latched;
+  response.payload.battery_uv_response.slaves_updated = slaves_updated;
+  uart_cmd_send(&response, TAG);
+}
+
+static esp_err_t apply_local_uv(bool enabled) {
+  esp_err_t err = pod_settings_set_uv_enabled(enabled);
+  if (err != ESP_OK) {
+    return err;
+  }
+  if (!enabled) {
+    (void)pod_settings_clear_uv_latched();
+  }
+  return ESP_OK;
+}
+
+static esp_err_t push_uv_to_slave(const client_info_t *client, bool enabled) {
+  if (client == NULL) {
+    return ESP_ERR_INVALID_ARG;
+  }
+  esp_err_t err = client_registry_set_uv_protection(client->id, enabled);
+  if (err != ESP_OK) {
+    return err;
+  }
+  return esp_now_comm_send_battery_uv(client->mac, client->id, enabled);
+}
+
+static void handle_battery_uv(const uint8_t *data, size_t len) {
+  alox_UartMessage uart_msg;
+  alox_BatteryUvRequest req = alox_BatteryUvRequest_init_zero;
+
+  if (uart_cmd_decode(data, len, &uart_msg) != ESP_OK) {
+    ESP_LOGW(TAG, "decode failed");
+    reply(0, false, pod_settings_is_uv_enabled(), pod_settings_is_uv_latched(),
+          0);
+    return;
+  }
+
+  const alox_BatteryUvRequest *req_ptr = UART_CMD_REQ(
+      &uart_msg, alox_UartMessage_battery_uv_request_tag, battery_uv_request);
+  if (req_ptr != NULL) {
+    req = *req_ptr;
+  }
+
+  if (req.write) {
+    if (req.all_clients) {
+      (void)client_registry_set_uv_protection_all(req.enabled);
+      uint32_t sent = 0;
+      for (size_t i = 0; i < client_registry_count(); i++) {
+        const client_info_t *client = client_registry_at(i);
+        if (client == NULL) {
+          continue;
+        }
+        if (esp_now_comm_send_battery_uv(client->mac, client->id,
+                                         req.enabled) == ESP_OK) {
+          sent++;
+        }
+      }
+
+      bool local_ok = apply_local_uv(req.enabled) == ESP_OK;
+      ESP_LOGI(TAG, "UV protection %s local=%d slaves=%u",
+               req.enabled ? "on" : "off", local_ok, (unsigned)sent);
+      reply(0, local_ok || sent > 0, req.enabled,
+            pod_settings_is_uv_latched(), sent);
+      return;
+    }
+
+    if (req.client_id == 0) {
+      esp_err_t err = apply_local_uv(req.enabled);
+      reply(0, err == ESP_OK, pod_settings_is_uv_enabled(),
+            pod_settings_is_uv_latched(), 0);
+      return;
+    }
+
+    const client_info_t *client = client_registry_find_by_id(req.client_id);
+    if (client == NULL) {
+      ESP_LOGW(TAG, "client id %lu not found", (unsigned long)req.client_id);
+      reply(req.client_id, false, req.enabled, false, 0);
+      return;
+    }
+
+    esp_err_t err = push_uv_to_slave(client, req.enabled);
+    reply(req.client_id, err == ESP_OK, req.enabled, false,
+          err == ESP_OK ? 1 : 0);
+    return;
+  }
+
+  if (req.all_clients || req.client_id == 0) {
+    reply(0, true, pod_settings_is_uv_enabled(), pod_settings_is_uv_latched(),
+          0);
+    return;
+  }
+
+  bool enabled = true;
+  esp_err_t err = client_registry_get_uv_protection(req.client_id, &enabled);
+  reply(req.client_id, err == ESP_OK, enabled, false, 0);
+}
+
+void cmd_battery_uv_register(void) {
+  uart_cmd_register(alox_MessageType_BATTERY_UV, handle_battery_uv);
+}

main/cmd/cmd_battery_uv.h

@@ -0,0 +1,6 @@
+#ifndef CMD_BATTERY_UV_H
+#define CMD_BATTERY_UV_H
+
+void cmd_battery_uv_register(void);
+
+#endif

main/cmd/cmd_cache_status.c

@@ -0,0 +1,92 @@
+#include "client_registry.h"
+#include "cmd_cache_status.h"
+#include "uart_cmd.h"
+
+static const char *TAG = "[CACHE_STAT]";
+
+static bool tap_notify_any(const client_info_t *client) {
+  return client != NULL &&
+         (client->tap_notify_single || client->tap_notify_double ||
+          client->tap_notify_triple);
+}
+
+static alox_TapKind tap_kind_from_registry(uint32_t kind) {
+  switch (kind) {
+  case 1:
+    return alox_TapKind_TAP_SINGLE;
+  case 2:
+    return alox_TapKind_TAP_DOUBLE;
+  case 3:
+    return alox_TapKind_TAP_TRIPLE;
+  default:
+    return alox_TapKind_TAP_NONE;
+  }
+}
+
+static void fill_cache_status(alox_CacheStatusResponse *out) {
+  if (out == NULL) {
+    return;
+  }
+
+  out->clients_count = 0;
+
+  size_t count = client_registry_count();
+  for (size_t i = 0; i < count; i++) {
+    const client_info_t *client = client_registry_at(i);
+    if (client == NULL) {
+      continue;
+    }
+
+    const bool want_accel = client->accel_stream_enabled;
+    const bool want_tap = tap_notify_any(client);
+    if (!want_accel && !want_tap) {
+      continue;
+    }
+    if (out->clients_count >=
+        sizeof(out->clients) / sizeof(out->clients[0])) {
+      break;
+    }
+
+    alox_CacheClientStatus *entry = &out->clients[out->clients_count++];
+    entry->client_id = client->id;
+    entry->has_accel = false;
+    entry->has_tap = false;
+
+    if (want_accel) {
+      entry->has_accel = true;
+      entry->accel.valid = client->accel_valid;
+      if (client->accel_valid) {
+        entry->accel.x = client->accel_x;
+        entry->accel.y = client->accel_y;
+        entry->accel.z = client->accel_z;
+        entry->accel.age_ms =
+            client_registry_ms_since(client->accel_updated_at);
+      }
+    }
+
+    if (want_tap) {
+      uint32_t kind = 0;
+      uint32_t age_ms = 0;
+      if (client_registry_take_tap(client->id, &kind, &age_ms)) {
+        entry->has_tap = true;
+        entry->tap.kind = tap_kind_from_registry(kind);
+        entry->tap.age_ms = age_ms;
+      }
+    }
+  }
+}
+
+static void handle_cache_status(const uint8_t *data, size_t len) {
+  (void)data;
+  (void)len;
+
+  alox_UartMessage response;
+  uart_cmd_init_response(&response, alox_MessageType_CACHE_STATUS,
+                         alox_UartMessage_cache_status_response_tag);
+  fill_cache_status(&response.payload.cache_status_response);
+  uart_cmd_send(&response, TAG);
+}
+
+void cmd_cache_status_register(void) {
+  uart_cmd_register(alox_MessageType_CACHE_STATUS, handle_cache_status);
+}

main/cmd/cmd_cache_status.h

@@ -0,0 +1,3 @@
+#pragma once
+
+void cmd_cache_status_register(void);

main/cmd/cmd_client_id_map_reset.c

@@ -0,0 +1,35 @@
+#include "cmd_client_id_map_reset.h"
+#include "esp_log.h"
+#include "esp_now_comm.h"
+#include "esp_now_core.h"
+#include "uart_cmd.h"
+
+static const char *TAG = "[ID_MAP_RESET]";
+
+static void reply(bool success) {
+  alox_UartMessage response;
+  uart_cmd_init_response(&response, alox_MessageType_CLIENT_ID_MAP_RESET,
+                         alox_UartMessage_client_id_map_reset_response_tag);
+  response.payload.client_id_map_reset_response.success = success;
+  uart_cmd_send(&response, TAG);
+}
+
+static void handle_client_id_map_reset(const uint8_t *data, size_t len) {
+  (void)data;
+  (void)len;
+
+  esp_err_t err;
+  if (esp_now_core_is_master()) {
+    ESP_LOGI(TAG, "reset master id map + notify online slaves");
+    err = esp_now_comm_reset_client_id_map();
+  } else {
+    ESP_LOGI(TAG, "clear local slave id binding");
+    err = esp_now_comm_clear_local_id_binding();
+  }
+  reply(err == ESP_OK);
+}
+
+void cmd_client_id_map_reset_register(void) {
+  uart_cmd_register(alox_MessageType_CLIENT_ID_MAP_RESET,
+                    handle_client_id_map_reset);
+}

main/cmd/cmd_client_id_map_reset.h

@@ -0,0 +1,3 @@
+#pragma once
+
+void cmd_client_id_map_reset_register(void);

main/cmd/cmd_client_info.c

@@ -27,6 +27,11 @@ static bool encode_clients_list(pb_ostream_t *stream, const pb_field_t *field,
     proto.last_success_ping =
         client_registry_ms_since(client->last_success_ping_at);
     proto.version = client->version;
+    proto.accel_stream_enabled = client->accel_stream_enabled;
+    proto.tap_notify_single = client->tap_notify_single;
+    proto.tap_notify_double = client->tap_notify_double;
+    proto.tap_notify_triple = client->tap_notify_triple;
+    proto.uv_protection_enabled = client->uv_protection_enabled;
     proto.mac.funcs.encode = uart_cmd_encode_bytes;
     proto.mac.arg = &mac;
 

main/cmd/cmd_espnow_echo_ping.c

@@ -0,0 +1,70 @@
+#include "client_registry.h"
+#include "cmd_espnow_echo_ping.h"
+#include "esp_log.h"
+#include "esp_now_comm.h"
+#include "uart_cmd.h"
+
+static const char *TAG = "[ECHO_PING]";
+
+static void reply(bool success, uint32_t client_id, uint64_t timestamp_us,
+                  uint32_t esp_rtt_us) {
+  alox_UartMessage response;
+  uart_cmd_init_response(&response, alox_MessageType_ESPNOW_ECHO_PING,
+                         alox_UartMessage_espnow_echo_ping_response_tag);
+  response.payload.espnow_echo_ping_response.success = success;
+  response.payload.espnow_echo_ping_response.client_id = client_id;
+  response.payload.espnow_echo_ping_response.timestamp_us = timestamp_us;
+  response.payload.espnow_echo_ping_response.esp_rtt_us = esp_rtt_us;
+  uart_cmd_send(&response, TAG);
+}
+
+static void handle_espnow_echo_ping(const uint8_t *data, size_t len) {
+  alox_UartMessage uart_msg;
+
+  if (uart_cmd_decode(data, len, &uart_msg) != ESP_OK) {
+    ESP_LOGW(TAG, "decode failed");
+    reply(false, 0, 0, 0);
+    return;
+  }
+
+  const alox_EspNowEchoPingRequest *req = UART_CMD_REQ(
+      &uart_msg, alox_UartMessage_espnow_echo_ping_request_tag,
+      espnow_echo_ping_request);
+  if (req == NULL || req->client_id == 0) {
+    ESP_LOGW(TAG, "need client_id in request");
+    reply(false, 0, 0, 0);
+    return;
+  }
+
+  const client_info_t *client = client_registry_find_by_id(req->client_id);
+  if (client == NULL) {
+    ESP_LOGW(TAG, "client id %lu not in registry",
+             (unsigned long)req->client_id);
+    reply(false, req->client_id, 0, 0);
+    return;
+  }
+
+  ESP_LOGI(TAG, "UART request client_id=%lu host_ts=%llu",
+           (unsigned long)req->client_id,
+           (unsigned long long)req->timestamp_us);
+
+  esp_now_echo_ping_result_t ping_result = {0};
+  esp_err_t err =
+      esp_now_comm_echo_ping(client->mac, req->timestamp_us, &ping_result);
+  if (err != ESP_OK) {
+    ESP_LOGW(TAG, "echo ping to id=%lu failed: %s", (unsigned long)req->client_id,
+             esp_err_to_name(err));
+    reply(false, req->client_id, 0, 0);
+    return;
+  }
+
+  ESP_LOGI(TAG, "UART reply client_id=%lu host_ts=%llu esp_rtt_us=%lu",
+           (unsigned long)req->client_id,
+           (unsigned long long)ping_result.echoed_us,
+           (unsigned long)ping_result.esp_rtt_us);
+  reply(true, req->client_id, ping_result.echoed_us, ping_result.esp_rtt_us);
+}
+
+void cmd_espnow_echo_ping_register(void) {
+  uart_cmd_register(alox_MessageType_ESPNOW_ECHO_PING, handle_espnow_echo_ping);
+}

main/cmd/cmd_espnow_echo_ping.h

@@ -0,0 +1,6 @@
+#ifndef CMD_ESPNOW_ECHO_PING_H
+#define CMD_ESPNOW_ECHO_PING_H
+
+void cmd_espnow_echo_ping_register(void);
+
+#endif

main/cmd/cmd_espnow_find_me.c

@@ -0,0 +1,64 @@
+#include "client_registry.h"
+#include "cmd_espnow_find_me.h"
+#include "esp_log.h"
+#include "esp_now_comm.h"
+#include "led_ring.h"
+#include "uart_cmd.h"
+
+static const char *TAG = "[FIND_ME]";
+
+static void reply(bool success, uint32_t client_id) {
+  alox_UartMessage response;
+  uart_cmd_init_response(&response, alox_MessageType_FIND_ME,
+                         alox_UartMessage_espnow_find_me_response_tag);
+  response.payload.espnow_find_me_response.success = success;
+  response.payload.espnow_find_me_response.client_id = client_id;
+  uart_cmd_send(&response, TAG);
+}
+
+static void handle_find_me(const uint8_t *data, size_t len) {
+  alox_UartMessage uart_msg;
+
+  if (uart_cmd_decode(data, len, &uart_msg) != ESP_OK) {
+    ESP_LOGW(TAG, "decode failed");
+    reply(false, 0);
+    return;
+  }
+
+  const alox_EspNowFindMeRequest *req = UART_CMD_REQ(
+      &uart_msg, alox_UartMessage_espnow_find_me_request_tag,
+      espnow_find_me_request);
+  if (req == NULL) {
+    ESP_LOGW(TAG, "missing find_me request");
+    reply(false, 0);
+    return;
+  }
+
+  if (req->client_id == 0) {
+    led_ring_find_me();
+    ESP_LOGI(TAG, "find-me on master");
+    reply(true, 0);
+    return;
+  }
+
+  const client_info_t *client = client_registry_find_by_id(req->client_id);
+  if (client == NULL) {
+    ESP_LOGW(TAG, "client id %lu not in registry",
+             (unsigned long)req->client_id);
+    reply(false, req->client_id);
+    return;
+  }
+
+  esp_err_t err = esp_now_comm_send_find_me(client->mac, req->client_id);
+  if (err == ESP_OK) {
+    ESP_LOGI(TAG, "find-me sent to slave %lu", (unsigned long)req->client_id);
+  } else {
+    ESP_LOGW(TAG, "find-me to slave %lu failed: %s",
+             (unsigned long)req->client_id, esp_err_to_name(err));
+  }
+  reply(err == ESP_OK, req->client_id);
+}
+
+void cmd_espnow_find_me_register(void) {
+  uart_cmd_register(alox_MessageType_FIND_ME, handle_find_me);
+}