Harden BLE host link and expose latency tools in the dashboard.

Add BLE RTT/stream tests and live tick median in the UI, fix concurrent WebSocket writes and late BATTERY replies, and skip 2M PHY updates that assert under ESP-NOW coexistence.

Co-authored-by: Cursor <cursoragent@cursor.com>

docs/ARCHITECTURE.md

@@ -79,8 +79,9 @@ sequenceDiagram
 
 | Feld | Quelle | Bedeutung |
 |------|--------|-----------|
-| `master` | `DIP_MASTER` (GPIO 4): Low = Master | Steuert UART + Registry-Nutzung |
-| `network` | IO-Expander, Bits 5–8 (nibble reversed) | 1–8 → WiFi/ESP-NOW-Kanal |
+| `master` | `DIP_MASTER` (GPIO 4): Low = Master | Steuert Host-Transport + Registry |
+| `network` | IO-Expander 8er-DIP-Bank, High-Nibble PCB-reversed; DIP1–7 one-hot | 1–7 → WiFi/ESP-NOW-Kanal |
+| `host_ble` | Expander DIP8 (nach Reverse+Invert) | `false`=UART, `true`=BLE (Boot only) |
 | `running_partition` | `esp_ota_get_running_partition()` | Aktives OTA-Label (`ota_0` / `ota_1`) |
 
 **Dateien:** `main/app_config.h`, `main/powerpod.c`, `main/powerpod.h` (Pins).
@@ -96,17 +97,21 @@ sequenceDiagram
 ├─────────────────────────────────────────────────────────────┤
 │  Dispatch: cmd_handler.c (Queue + vCmdDispatcherTask)       │
 ├─────────────────────────────────────────────────────────────┤
-│  Transport UART: uart.c (Framing)  │  ESP-NOW: esp_now_comm │
+│  Host transport: uart.c / ble_host.c (Framing via host_transport) │
+│  ESP-NOW: esp_now_comm                                              │
 ├─────────────────────────────────────────────────────────────┤
 │  Protokoll: uart_messages.proto    │  esp_now_messages.proto │
 │  Codec: nanopb (proto/*.pb.c)      │  esp_now_proto.c        │
 ├─────────────────────────────────────────────────────────────┤
 │  Domäne: client_registry, bosch456, led_ring, ota_*, board  │
 ├─────────────────────────────────────────────────────────────┤
-│  ESP-IDF: UART, WiFi, ESP-NOW, I2C, ADC, OTA, NVS, FreeRTOS │
+│  ESP-IDF: UART, NimBLE, WiFi, ESP-NOW, I2C, ADC, OTA, NVS   │
 └─────────────────────────────────────────────────────────────┘
 ```
 
+**Host UART vs BLE:** Nur einer aktiv (DIP8). Gleiches Framing (`0xAA`…`0xCC`) und dieselbe `cmd_queue`. BLE: NUS-ähnliche GATT-Char, Write=RX, Notify=TX. `gotool serve` verbindet UART oder BLE über Dashboard/REST/WS (`managedHost`); **OTA nur UART**. Bei BLE-Host und aktivem Accel-Stream pusht `ble_stream` periodisch `BLE_STREAM_TICK` (8–16 ms) mit `esp_timestamp_us` (Live-Pfad bevorzugt Tick statt CACHE_STATUS-Poll).
+
+
 ---
 
 ## 4. Datenfluss: Commands (Befehle)

docs/DOCUMENTATION.md

@@ -47,14 +47,15 @@ Zielbild für den Host: Befehle an den Master senden; der Master steuert Slaves
 |--------|------|----------------|
 | DIP Master/Slave | 4 | `powerpod.h` — Low = Master |
 | I2C SCL / SDA | 5 / 6 | IO-Expander `0x20`, BMA456 `0x18` |
-| UART1 TX / RX | **2 / 3** | `uart.h` (Adapter: ESP-TX → Host-RX) |
+| Expander DIP-Bank (8) | PCF/TCA @ `0x20` | DIP1–7 = Netzwerk 1–7 (one-hot); **DIP8 ON = BLE host**, OFF = UART. High-Nibble auf PCB vertauscht → `reverse_high_nibble_lut`. Wechsel nur nach Reboot. |
+| UART1 TX / RX | **2 / 3** | `uart.h` (Adapter: ESP-TX → Host-RX); nur wenn DIP8 = UART |
 | LED-Ring (WS2812) | 7 | `led_ring.c` |
 | BMA456 Interrupt | 10 | `bosch456.c` |
 | Taster | 12 | `board_input.c` |
 | LiPo ADC 1 | 1 | `board_input.c` |
 | LiPo ADC 2 | 11 | `board_input.c` |
 
-**UART (Host-Protokoll):** `UART_NUM_1`, **921600** Baud, 8N1, kein Flow-Control.
+**Host-Protokoll (UART oder BLE):** Gleiches Framing (`0xAA`…`0xCC`) + nanopb. **UART:** `UART_NUM_1`, **921600** Baud, 8N1. **BLE:** Gerät `Powerpod`, NUS-UUIDs `6e400001`/`6e400002` (Write=RX, Notify=TX). goTool CLI: `-port …` oder `-ble` / `-ble-name Powerpod`. **`gotool serve`** startet ohne Pflicht-Gerät; Dashboard/REST/WS verbinden UART oder BLE dynamisch (`-port`/`-ble` nur optionale Vorbelegung). **OTA nur UART** (DIP8=0). Bei BLE + Accel-Stream: periodische `BLE_STREAM_TICK`-Notifies (`period_ms` 8–16) speisen Live-Accel im Dashboard/API.
 
 **ESP-IDF-Log (Debug):** `esp_log_*` geht auf **UART0** (Standard-Konsole, typisch USB am Dev-Board, **115200** Baud, `CONFIG_ESP_CONSOLE_UART_NUM=0`). Das ist **getrennt** vom Host-UART1 — goTool liest keine `esp_log`-Ausgabe. Ohne angeschlossenes Debug-Kabel werden aktivierte Logs trotzdem formatiert und an UART0 gesendet (CPU-Overhead bleibt); nur `ESP_LOG_NONE` / Level-Filter vermeiden die Arbeit.
 
@@ -94,20 +95,20 @@ idf.py -p /dev/ttyUSB0 flash monitor
 2. `board_input_init_adc_only()` — LiPo-ADC
 3. Bei `POWERPOD_BATTERY_UV_ENABLE`: `battery_uv_evaluate_boot()` → ggf. Energiesparmodus (nur LED + ADC, **kein** weiterer Init)
 4. DIP → `app_config.master`
-5. I2C + IO-Expander → `app_config.network` (1–8)
+5. I2C + IO-Expander → `app_config.network` (1–7) + `app_config.host_ble` (DIP8)
 6. `init_bma456()` — optional, bei Fehler weiter ohne Sensor
 7. `pod_settings_apply_accel_deadzone()` wenn Sensor da
 8. OTA-Partition → `app_config.running_partition`
 9. `board_input_start_lipo_monitor()` + `board_input_init_button()`
 10. `esp_now_comm_init(&app_config)` — **normaler Pfad** (Master + Slave)
 11. `led_ring_init()`
-12. **Nur Master:** `cmd_queue` → `init_cmdHandler` → `init_uart` → alle `cmd_*_register()`
+12. **Nur Master:** `cmd_queue` → `init_cmdHandler` → `init_uart` **oder** `init_ble_host` → alle `cmd_*_register()`
 
 ### 4.2 Master vs. Slave
 
 | Funktion | Master | Slave |
 |----------|--------|-------|
-| UART Command-Handler | Ja | Nein |
+| Host Command-Handler (UART oder BLE) | Ja | Nein |
 | ESP-NOW Discover senden | Ja (Broadcast) | Nein |
 | ESP-NOW auf Discover reagieren | Nein | Ja |
 | `client_registry` für Fremdknoten | Ja | Nein (nur eigener Join-State) |
@@ -233,10 +234,11 @@ Nur auf dem **Master** registriert (`powerpod.c`). IDs aus `MessageType` in `uar
 | 21 | OTA_SLAVE_PROGRESS | `cmd_ota_slave_progress.c` | Fortschritt pro Slave |
 | 22 | FIND_ME | `cmd_espnow_find_me.c` | LED Locate |
 | 23 | RESTART | `cmd_restart.c` | Master oder Slave reboot |
-| 25 | ACCEL_STREAM | `cmd_accel_stream.c` | ESP-NOW Accel-Stream an/aus |
+| 25 | ACCEL_STREAM | `cmd_accel_stream.c` | ESP-NOW Accel-Stream an/aus (+ `period_ms` für BLE-Push) |
 | 26 | BATTERY_STATUS | `cmd_battery.c` | Cache LiPo Master + Slaves |
 | 27 | TAP_NOTIFY | `cmd_tap_notify.c` | Tap-Weiterleitung konfigurieren |
 | 29 | CACHE_STATUS | `cmd_cache_status.c` | Accel + Tap Cache (ein Round-Trip) |
+| 33 | BLE_STREAM_TICK | `ble_stream.c` | Master→Host Notify (nur BLE): Snapshot + `esp_timestamp_us` |
 | 30 | ESPNOW_ECHO_PING | `cmd_espnow_echo_ping.c` | Timestamp-Echo über ESP-NOW (Latenztest) |
 | 31 | SET_LOG_LEVEL | `cmd_set_log_level.c` | ESP-IDF-Log-Level global (`"*"`) lesen/setzen |
 | 32 | TAP_CONFIG | `cmd_tap_config.c` | BMA456 Multitap-Parameter + NVS |
@@ -258,6 +260,7 @@ Nur auf dem **Master** registriert (`powerpod.c`). IDs aus `MessageType` in `uar
 
 ### 7.4 ACCEL_STREAM (25)
 
+- Optional `period_ms` (8–16): BLE-Host-Push-Intervall für `BLE_STREAM_TICK` (UART ignoriert; Default 16).
 - Master setzt `client_registry_set_accel_stream` und sendet `ESPNOW_SET_ACCEL_STREAM`.
 - Slave-Task `slave_accel_stream_task` sendet `ESPNOW_ACCEL_SAMPLE` alle 16 ms.
 

goTool/README.md

@@ -61,16 +61,18 @@ See [`testdata/README.md`](testdata/README.md) for the JSON schema.
 
 ### Web dashboard
 
-Polls the master over UART and pushes state to the browser via WebSocket (Alpine.js + Bootstrap 5).
+Starts without a required host link. Connect UART or BLE from the UI (or pre-connect with `-port` / `-ble`). State is pushed to the browser via WebSocket (Alpine.js + Bootstrap 5). OTA remains UART-only.
 
 ```bash
+go run . serve
 go run . -port /dev/ttyUSB0 serve
-go run . -port /dev/ttyUSB0 serve -addr :8080 -interval 2s
-go run . -port /dev/ttyUSB0 serve -api-addr :8081 -accel-interval 16ms
+go run . -ble serve
+go run . serve -addr :8080 -interval 2s
+go run . serve -api-addr :8081 -accel-interval 16ms
 make gotool-serve PORT=/dev/ttyUSB0
 ```
 
-Open [http://localhost:8080](http://localhost:8080) — shows master firmware info and the ESP-NOW client table from `CLIENT_INFO`.
+Open [http://localhost:8080](http://localhost:8080) — Host-Verbindung panel (UART ports / BLE scan), master firmware info, ESP-NOW client table.
 
 **Tap (dashboard):** two independent controls per slave:
 
@@ -81,11 +83,11 @@ Open [http://localhost:8080](http://localhost:8080) — shows master firmware in
 
 Enable notify first, then turn receive on to see events. Same split as the external WebSocket API (`set_tap_notify` vs `set_tap_stream`).
 
-If the UART device is unplugged or the port disappears, `serve` keeps running and retries on each poll interval; the UI shows **UART off** until the port is available again.
+If the host disconnects, `serve` keeps running; the badge shows **off** until you reconnect from the UI or via REST/WS.
 
 ### HTTP / WebSocket API
 
-`serve` also listens on **`:8081`** for external programs (`-api-addr`, empty to disable). Same UART as the dashboard.
+`serve` also listens on **`:8081`** for external programs (`-api-addr`, empty to disable). Same `managedHost` as the dashboard (UART or BLE).
 
 | Doc | Content |
 |-----|---------|

goTool/api_ble_measure.go

@@ -0,0 +1,129 @@
+package main
+
+import (
+	"encoding/json"
+	"errors"
+	"io"
+	"net/http"
+	"time"
+)
+
+type bleRttAPIRequest struct {
+	Count   *int     `json:"count"`
+	Warmup  *int     `json:"warmup"`
+	SettleS *float64 `json:"settle_s"`
+}
+
+type bleStreamAPIRequest struct {
+	ClientID *uint32  `json:"client_id"`
+	PeriodMs *uint32  `json:"period_ms"`
+	Count    *int     `json:"count"`
+	TolMs    *float64 `json:"tol_ms"`
+	TimeoutS *float64 `json:"timeout_s"`
+}
+
+func mountBleTestAPI(mux *http.ServeMux, link *managedHost) {
+	mux.HandleFunc("/api/ble-rtt", func(w http.ResponseWriter, r *http.Request) {
+		if r.Method != http.MethodPost {
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+			return
+		}
+		serveBleRtt(w, r, link)
+	})
+	mux.HandleFunc("/api/ble-stream", func(w http.ResponseWriter, r *http.Request) {
+		if r.Method != http.MethodPost {
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+			return
+		}
+		serveBleStreamTest(w, r, link)
+	})
+}
+
+func requireBLEHost(w http.ResponseWriter, link *managedHost) bool {
+	if link.Transport() != hostTransportBLE || !link.IsConnected() {
+		writeJSON(w, http.StatusBadRequest, bleRttResult{
+			Error: "BLE host required (connect via BLE, DIP8=1)",
+		})
+		return false
+	}
+	return true
+}
+
+func serveBleRtt(w http.ResponseWriter, r *http.Request, link *managedHost) {
+	if !requireBLEHost(w, link) {
+		return
+	}
+	var body bleRttAPIRequest
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil && !errors.Is(err, io.EOF) {
+		writeJSON(w, http.StatusBadRequest, bleRttResult{Error: "invalid JSON"})
+		return
+	}
+	count, warmup := 50, 5
+	settle := 0.0
+	if body.Count != nil {
+		count = *body.Count
+	}
+	if body.Warmup != nil {
+		warmup = *body.Warmup
+	}
+	if body.SettleS != nil {
+		settle = *body.SettleS
+	}
+
+	if !link.beginPausePoll() {
+		writeJSON(w, http.StatusConflict, bleRttResult{Error: "host busy"})
+		return
+	}
+	defer link.endPausePoll()
+
+	out := measureBleRtt(link, count, warmup, time.Duration(settle*float64(time.Second)))
+	status := http.StatusOK
+	if !out.Success {
+		status = http.StatusBadRequest
+	}
+	writeJSON(w, status, out)
+}
+
+func serveBleStreamTest(w http.ResponseWriter, r *http.Request, link *managedHost) {
+	if !requireBLEHost(w, link) {
+		return
+	}
+	var body bleStreamAPIRequest
+	if err := json.NewDecoder(r.Body).Decode(&body); err != nil && !errors.Is(err, io.EOF) {
+		writeJSON(w, http.StatusBadRequest, bleStreamResult{Error: "invalid JSON"})
+		return
+	}
+	count := 50
+	periodMs := uint32(16)
+	tolMs := 2.0
+	timeoutS := 15.0
+	var clientID uint32
+	if body.Count != nil {
+		count = *body.Count
+	}
+	if body.PeriodMs != nil {
+		periodMs = *body.PeriodMs
+	}
+	if body.TolMs != nil {
+		tolMs = *body.TolMs
+	}
+	if body.TimeoutS != nil {
+		timeoutS = *body.TimeoutS
+	}
+	if body.ClientID != nil {
+		clientID = *body.ClientID
+	}
+
+	if !link.beginPausePoll() {
+		writeJSON(w, http.StatusConflict, bleStreamResult{Error: "host busy"})
+		return
+	}
+	defer link.endPausePoll()
+
+	out := measureBleStream(link, clientID, periodMs, count, tolMs, timeoutS)
+	status := http.StatusOK
+	if !out.Success {
+		status = http.StatusBadRequest
+	}
+	writeJSON(w, status, out)
+}

goTool/api_host.go

@@ -0,0 +1,140 @@
+package main
+
+import (
+	"encoding/json"
+	"net/http"
+	"time"
+)
+
+type hostAPIResponse struct {
+	Transport string `json:"transport"`
+	Endpoint  string `json:"endpoint"`
+	Connected bool   `json:"connected"`
+	BleName   string `json:"ble_name,omitempty"`
+	Error     string `json:"error,omitempty"`
+}
+
+type hostConnectRequest struct {
+	Transport string `json:"transport"` // uart|ble
+	Port      string `json:"port,omitempty"`
+	Address   string `json:"address,omitempty"`
+	Name      string `json:"name,omitempty"`
+	Baud      int    `json:"baud,omitempty"`
+}
+
+type bleScanRequest struct {
+	TimeoutS   float64 `json:"timeout_s"`
+	NameFilter string  `json:"name_filter"`
+}
+
+type bleScanResponse struct {
+	Devices []bleScanDevice `json:"devices"`
+	Error   string          `json:"error,omitempty"`
+}
+
+type serialPortsResponse struct {
+	Ports []string `json:"ports"`
+	Error string   `json:"error,omitempty"`
+}
+
+func mountHostAPI(mux *http.ServeMux, link *managedHost) {
+	mux.HandleFunc("/api/host", func(w http.ResponseWriter, r *http.Request) {
+		if r.Method != http.MethodGet {
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+			return
+		}
+		st := link.HostStatus()
+		writeJSON(w, http.StatusOK, hostAPIResponse{
+			Transport: st["transport"].(string),
+			Endpoint:  st["endpoint"].(string),
+			Connected: st["connected"].(bool),
+			BleName:   st["ble_name"].(string),
+		})
+	})
+
+	mux.HandleFunc("/api/host/connect", func(w http.ResponseWriter, r *http.Request) {
+		if r.Method != http.MethodPost {
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+			return
+		}
+		var body hostConnectRequest
+		if err := json.NewDecoder(r.Body).Decode(&body); err != nil {
+			writeJSON(w, http.StatusBadRequest, hostAPIResponse{Error: "invalid JSON"})
+			return
+		}
+		var err error
+		switch body.Transport {
+		case hostTransportUART:
+			err = link.ConnectUART(body.Port, body.Baud)
+		case hostTransportBLE:
+			err = link.ConnectBLE(body.Address, body.Name)
+		default:
+			writeJSON(w, http.StatusBadRequest, hostAPIResponse{Error: "transport must be uart or ble"})
+			return
+		}
+		st := link.HostStatus()
+		resp := hostAPIResponse{
+			Transport: st["transport"].(string),
+			Endpoint:  st["endpoint"].(string),
+			Connected: st["connected"].(bool),
+			BleName:   st["ble_name"].(string),
+		}
+		if err != nil {
+			resp.Error = err.Error()
+			resp.Connected = false
+			writeJSON(w, http.StatusBadRequest, resp)
+			return
+		}
+		writeJSON(w, http.StatusOK, resp)
+	})
+
+	mux.HandleFunc("/api/host/disconnect", func(w http.ResponseWriter, r *http.Request) {
+		if r.Method != http.MethodPost {
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+			return
+		}
+		_ = link.Disconnect()
+		st := link.HostStatus()
+		writeJSON(w, http.StatusOK, hostAPIResponse{
+			Transport: st["transport"].(string),
+			Endpoint:  st["endpoint"].(string),
+			Connected: false,
+		})
+	})
+
+	mux.HandleFunc("/api/serial/ports", func(w http.ResponseWriter, r *http.Request) {
+		if r.Method != http.MethodGet {
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+			return
+		}
+		ports, err := listSerialPorts()
+		if err != nil {
+			writeJSON(w, http.StatusOK, serialPortsResponse{Ports: []string{}, Error: err.Error()})
+			return
+		}
+		writeJSON(w, http.StatusOK, serialPortsResponse{Ports: ports})
+	})
+
+	mux.HandleFunc("/api/ble/scan", func(w http.ResponseWriter, r *http.Request) {
+		if r.Method != http.MethodPost {
+			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
+			return
+		}
+		var body bleScanRequest
+		_ = json.NewDecoder(r.Body).Decode(&body)
+		timeout := time.Duration(body.TimeoutS * float64(time.Second))
+		if timeout <= 0 {
+			timeout = 5 * time.Second
+		}
+		// Disconnect active BLE before scan (BlueZ adapter contention).
+		if link.Transport() == hostTransportBLE {
+			_ = link.Disconnect()
+		}
+		devs, err := scanBLEDevices(timeout, body.NameFilter)
+		if err != nil {
+			writeJSON(w, http.StatusOK, bleScanResponse{Devices: []bleScanDevice{}, Error: err.Error()})
+			return
+		}
+		writeJSON(w, http.StatusOK, bleScanResponse{Devices: devs})
+	})
+}

goTool/api_serve.go

@@ -93,6 +93,8 @@ type otaAPIResponse struct {
 }
 
 func mountServeAPI(mux *http.ServeMux, link *managedSerial, hub *wsHub, streamCtl *accelStreamCtl, tapCtl *tapNotifyCtl) {
+	mountHostAPI(mux, link)
+	mountBleTestAPI(mux, link)
 	mountLiveStreamAPI(mux, hub)
 	mountAccelStreamAPI(mux, link, hub, streamCtl)
 	mountTapAPI(mux, link, hub, tapCtl)
@@ -157,6 +159,10 @@ func mountServeAPI(mux *http.ServeMux, link *managedSerial, hub *wsHub, streamCt
 }
 
 func serveOTAUpload(w http.ResponseWriter, r *http.Request, link *managedSerial, hub *wsHub) {
+	if link.Transport() != hostTransportUART || !link.IsConnected() {
+		writeJSON(w, http.StatusBadRequest, otaAPIResponse{Error: "OTA requires UART host (DIP8=0)"})
+		return
+	}
 	if err := r.ParseMultipartForm(otaMaxFirmwareSize); err != nil {
 		writeJSON(w, http.StatusBadRequest, otaAPIResponse{Error: "invalid form"})
 		return

goTool/api_stream.go

@@ -4,6 +4,7 @@ import (
 	"context"
 	"encoding/json"
 	"errors"
+	"fmt"
 	"log"
 	"net/http"
 	"sync"
@@ -39,6 +40,9 @@ type InputClientSample struct {
 type InputStreamMessage struct {
 	Type            string   `json:"type"` // "hello" | "input"
 	Serial          string   `json:"serial_port,omitempty"`
+	Transport       string   `json:"transport,omitempty"`
+	Endpoint        string   `json:"endpoint,omitempty"`
+	Connected       *bool    `json:"connected,omitempty"`
 	IntervalMs      int      `json:"interval_ms,omitempty"`
 	PreFetchMs      int      `json:"pre_fetch_ms,omitempty"`
 	TapDisplayMinMs int      `json:"tap_display_min_ms,omitempty"`
@@ -51,6 +55,33 @@ type InputStreamMessage struct {
 	Error   string              `json:"error,omitempty"`
 }
 
+// HostStatusMessage is the reply to get_host / host_connect / host_disconnect.
+type HostStatusMessage struct {
+	Type      string `json:"type"` // "host_status"
+	Transport string `json:"transport"`
+	Endpoint  string `json:"endpoint"`
+	Connected bool   `json:"connected"`
+	BleName   string `json:"ble_name,omitempty"`
+	Success   bool   `json:"success"`
+	Error     string `json:"error,omitempty"`
+}
+
+// SerialPortsMessage is the reply to list_serial_ports.
+type SerialPortsMessage struct {
+	Type    string   `json:"type"` // "serial_ports"
+	Ports   []string `json:"ports"`
+	Success bool     `json:"success"`
+	Error   string   `json:"error,omitempty"`
+}
+
+// BleScanResultMessage is the reply to ble_scan.
+type BleScanResultMessage struct {
+	Type    string          `json:"type"` // "ble_scan_result"
+	Devices []bleScanDevice `json:"devices"`
+	Success bool            `json:"success"`
+	Error   string          `json:"error,omitempty"`
+}
+
 // StreamStatusMessage is the reply to set_stream / get_stream (this connection).
 type StreamStatusMessage struct {
 	Type          string `json:"type"` // "stream_status"
@@ -116,12 +147,23 @@ type accelWSCommand struct {
 	DoubleTap  *bool  `json:"double_tap"`
 	Triple     *bool  `json:"triple"`
 	AllClients bool   `json:"all_clients"`
+	// Host connect / BLE scan
+	Transport  string  `json:"transport"`
+	Port       string  `json:"port"`
+	Address    string  `json:"address"`
+	Name       string  `json:"name"`
+	Baud       int     `json:"baud"`
+	TimeoutS   float64 `json:"timeout_s"`
+	NameFilter string  `json:"name_filter"`
 }
 
 type APIInfoResponse struct {
 	Name              string `json:"name"`
 	Version           string `json:"version"`
 	SerialPort        string `json:"serial_port"`
+	Transport         string `json:"transport"`
+	Endpoint          string `json:"endpoint"`
+	Connected         bool   `json:"connected"`
 	WebSocket         string `json:"websocket"`
 	DefaultIntervalMs int    `json:"default_interval_ms"`
 	DefaultPreFetchMs int    `json:"default_pre_fetch_ms"`
@@ -139,12 +181,31 @@ type cachedTapEvent struct {
 
 type wsSubscriber struct {
 	conn          *websocket.Conn
+	writeMu       sync.Mutex // gorilla: one writer per connection
 	receiveInput  bool
 	interval      time.Duration
 	preFetch      time.Duration
 	lastInputSent time.Time
 }
 
+func (sub *wsSubscriber) writeBytes(data []byte) error {
+	if sub == nil {
+		return fmt.Errorf("nil subscriber")
+	}
+	sub.writeMu.Lock()
+	defer sub.writeMu.Unlock()
+	_ = sub.conn.SetWriteDeadline(time.Now().Add(2 * time.Second))
+	return sub.conn.WriteMessage(websocket.TextMessage, data)
+}
+
+func (sub *wsSubscriber) writeJSON(v any) {
+	data, err := json.Marshal(v)
+	if err != nil {
+		return
+	}
+	_ = sub.writeBytes(data)
+}
+
 type pendingInputCache struct {
 	cache   *pb.CacheStatusResponse
 	readAt  time.Time
@@ -196,7 +257,7 @@ func clampPreFetch(d time.Duration) time.Duration {
 	return d
 }
 
-func (h *accelStreamHub) register(conn *websocket.Conn, portName string) *wsSubscriber {
+func (h *accelStreamHub) register(conn *websocket.Conn, link *managedSerial) *wsSubscriber {
 	sub := &wsSubscriber{
 		conn:         conn,
 		receiveInput: false,
@@ -207,14 +268,20 @@ func (h *accelStreamHub) register(conn *websocket.Conn, portName string) *wsSubs
 	h.clients[conn] = sub
 	h.mu.Unlock()
 
+	st := link.HostStatus()
+	connected := st["connected"].(bool)
 	hello := InputStreamMessage{
 		Type:            "hello",
-		Serial:          portName,
+		Serial:          st["endpoint"].(string),
+		Transport:       st["transport"].(string),
+		Endpoint:        st["endpoint"].(string),
+		Connected:       &connected,
 		IntervalMs:      int(h.defaultInterval / time.Millisecond),
 		PreFetchMs:      int(h.defaultPreFetch / time.Millisecond),
 		TapDisplayMinMs: apiTapDisplayMinMs,
 		Note:            "set_tap_notify configures slave S/D/T only; set_stream enables input polling/push on this connection",
 		Commands: []string{
+			"get_host", "list_serial_ports", "ble_scan", "host_connect", "host_disconnect",
 			"list_clients",
 			"set_stream", "get_stream",
 			"set_input_stream", "get_input_stream",
@@ -222,9 +289,7 @@ func (h *accelStreamHub) register(conn *websocket.Conn, portName string) *wsSubs
 			"set_led_ring", "get_battery",
 		},
 	}
-	if data, err := json.Marshal(hello); err == nil {
-		_ = conn.WriteMessage(websocket.TextMessage, data)
-	}
+	sub.writeJSON(hello)
 	return sub
 }
 
@@ -420,7 +485,11 @@ func (h *accelStreamHub) deliverInput(msg InputStreamMessage) {
 
 	now := time.Now()
 	h.mu.Lock()
-	defer h.mu.Unlock()
+	type pending struct {
+		conn *websocket.Conn
+		sub  *wsSubscriber
+	}
+	var out []pending
 	for conn, sub := range h.clients {
 		if !sub.receiveInput {
 			continue
@@ -429,13 +498,26 @@ func (h *accelStreamHub) deliverInput(msg InputStreamMessage) {
 			continue
 		}
 		sub.lastInputSent = now
-		if err := conn.WriteMessage(websocket.TextMessage, data); err != nil {
-			delete(h.clients, conn)
-			_ = conn.Close()
+		out = append(out, pending{conn: conn, sub: sub})
+	}
+	h.mu.Unlock()
+
+	for _, p := range out {
+		if err := p.sub.writeBytes(data); err != nil {
+			h.mu.Lock()
+			delete(h.clients, p.conn)
+			h.mu.Unlock()
+			_ = p.conn.Close()
 		}
 	}
 }
 
+func (h *accelStreamHub) clientsFromCache(cache *pb.CacheStatusResponse) []InputClientSample {
+	h.mu.Lock()
+	defer h.mu.Unlock()
+	return h.inputClientsFromCacheLocked(cache, time.Now())
+}
+
 func runInputStreamer(link *managedSerial, hub *accelStreamHub, dash *wsHub, ctl *accelStreamCtl, tapCtl *tapNotifyCtl, stop <-chan struct{}) {
 	ticker := time.NewTicker(minAPIStreamInterval)
 	defer ticker.Stop()
@@ -449,11 +531,31 @@ func runInputStreamer(link *managedSerial, hub *accelStreamHub, dash *wsHub, ctl
 		case <-hub.configChanged:
 			pending = nil
 		case now := <-ticker.C:
-			if !hub.anyWantsInput() || !inputPollingActive(dash, ctl, tapCtl) {
+			if !hub.anyWantsInput() || !inputPollingActive(dash, ctl, tapCtl) || link.PollPaused() {
 				pending = nil
 				continue
 			}
 
+			// Prefer BLE_STREAM_TICK when on BLE (firmware push).
+			if link.Transport() == hostTransportBLE {
+				payload, err := link.NextStreamTick(20 * time.Millisecond)
+				if err == nil {
+					cache, cerr := cacheStatusFromBLEStreamPayload(payload)
+					if cerr == nil {
+						hub.ingestTapFromCache(cache)
+						hub.deliverInput(InputStreamMessage{
+							Type:    "input",
+							T:       time.Now().UnixNano(),
+							Success: true,
+							Clients: hub.clientsFromCache(cache),
+						})
+						pending = nil
+						continue
+					}
+				}
+				// Fall through to CACHE_STATUS poll if no tick yet.
+			}
+
 			needRead, needDeliver, waitPreFetch := hub.streamTiming(now)
 
 			if needRead && pending == nil {
@@ -487,14 +589,11 @@ func runInputStreamer(link *managedSerial, hub *accelStreamHub, dash *wsHub, ctl
 			}
 
 			if pending.cache != nil && now.Sub(pending.readAt) >= waitPreFetch {
-				hub.mu.RLock()
-				clients := hub.inputClientsFromCacheLocked(pending.cache, now)
-				hub.mu.RUnlock()
 				hub.deliverInput(InputStreamMessage{
 					Type:    "input",
 					T:       ts,
 					Success: true,
-					Clients: clients,
+					Clients: hub.clientsFromCache(pending.cache),
 				})
 				pending = nil
 			}
@@ -512,46 +611,29 @@ func inputPollingActive(dash *wsHub, ctl *accelStreamCtl, tapCtl *tapNotifyCtl)
 	return dash != nil && dash.anyAccelStreamEnabled()
 }
 
-func writeStreamStatus(conn *websocket.Conn, msg StreamStatusMessage) {
-	data, err := json.Marshal(msg)
-	if err != nil {
-		return
-	}
-	_ = conn.WriteMessage(websocket.TextMessage, data)
+func writeStreamStatus(sub *wsSubscriber, msg StreamStatusMessage) {
+	sub.writeJSON(msg)
 }
 
-func writeBatteryStatus(conn *websocket.Conn, out batteryAPIResponse) {
+func writeBatteryStatus(sub *wsSubscriber, out batteryAPIResponse) {
 	out.Type = "battery_status"
-	data, err := json.Marshal(out)
-	if err != nil {
-		return
-	}
-	_ = conn.WriteMessage(websocket.TextMessage, data)
+	sub.writeJSON(out)
 }
 
-func writeLedRingStatus(conn *websocket.Conn, out ledRingAPIResponse) {
+func writeLedRingStatus(sub *wsSubscriber, out ledRingAPIResponse) {
 	out.Type = "led_ring_status"
-	data, err := json.Marshal(out)
-	if err != nil {
-		return
-	}
-	_ = conn.WriteMessage(websocket.TextMessage, data)
+	sub.writeJSON(out)
 }
 
-func writeInputStreamStatus(conn *websocket.Conn, out accelStreamAPIResponse) {
-	msg := InputStreamStatusMessage{
+func writeInputStreamStatus(sub *wsSubscriber, out accelStreamAPIResponse) {
+	sub.writeJSON(InputStreamStatusMessage{
 		Type:          "input_stream_status",
 		ClientID:      out.ClientID,
 		Enabled:       out.Enabled,
 		Success:       out.Success,
 		SlavesUpdated: out.SlavesUpdated,
 		Error:         out.Error,
-	}
-	data, err := json.Marshal(msg)
-	if err != nil {
-		return
-	}
-	_ = conn.WriteMessage(websocket.TextMessage, data)
+	})
 }
 
 func clientInfoToAPI(c *pb.ClientInfo) APIClientInfo {
@@ -570,16 +652,12 @@ func clientInfoToAPI(c *pb.ClientInfo) APIClientInfo {
 	}
 }
 
-func writeClientList(conn *websocket.Conn, msg ClientListMessage) {
-	data, err := json.Marshal(msg)
-	if err != nil {
-		return
-	}
-	_ = conn.WriteMessage(websocket.TextMessage, data)
+func writeClientList(sub *wsSubscriber, msg ClientListMessage) {
+	sub.writeJSON(msg)
 }
 
-func writeTapNotifyStatus(conn *websocket.Conn, out tapNotifyAPIResponse) {
-	msg := TapNotifyStatusMessage{
+func writeTapNotifyStatus(sub *wsSubscriber, out tapNotifyAPIResponse) {
+	sub.writeJSON(TapNotifyStatusMessage{
 		Type:          "tap_notify_status",
 		ClientID:      out.ClientID,
 		Single:        out.Single,
@@ -588,12 +666,7 @@ func writeTapNotifyStatus(conn *websocket.Conn, out tapNotifyAPIResponse) {
 		Success:       out.Success,
 		SlavesUpdated: out.SlavesUpdated,
 		Error:         out.Error,
-	}
-	data, err := json.Marshal(msg)
-	if err != nil {
-		return
-	}
-	_ = conn.WriteMessage(websocket.TextMessage, data)
+	})
 }
 
 func applyTapNotifyClientWS(link *managedSerial, dash *wsHub, tapCtl *tapNotifyCtl, clientID uint32, single, doubleTap, triple bool) tapNotifyAPIResponse {
@@ -626,18 +699,70 @@ func applyTapNotifyClientWS(link *managedSerial, dash *wsHub, tapCtl *tapNotifyC
 	return out
 }
 
-func handleAccelWSCommand(conn *websocket.Conn, sub *wsSubscriber, data []byte, link *managedSerial, dash *wsHub, ctl *accelStreamCtl, tapCtl *tapNotifyCtl, hub *accelStreamHub) {
+func handleAccelWSCommand(sub *wsSubscriber, data []byte, link *managedSerial, dash *wsHub, ctl *accelStreamCtl, tapCtl *tapNotifyCtl, hub *accelStreamHub) {
 	var cmd accelWSCommand
 	if err := json.Unmarshal(data, &cmd); err != nil {
-		writeStreamStatus(conn, StreamStatusMessage{Type: "stream_status", Error: "invalid JSON"})
+		writeStreamStatus(sub, StreamStatusMessage{Type: "stream_status", Error: "invalid JSON"})
 		return
 	}
 
 	switch cmd.Type {
+	case "get_host":
+		writeHostStatus(sub, hostStatusFromLink(link, true, ""))
+
+	case "list_serial_ports":
+		ports, err := listSerialPorts()
+		msg := SerialPortsMessage{Type: "serial_ports", Ports: ports, Success: err == nil}
+		if err != nil {
+			msg.Error = err.Error()
+			msg.Ports = []string{}
+		}
+		writeWSJSON(sub, msg)
+
+	case "ble_scan":
+		timeout := time.Duration(cmd.TimeoutS * float64(time.Second))
+		if timeout <= 0 {
+			timeout = 5 * time.Second
+		}
+		if link.Transport() == hostTransportBLE {
+			_ = link.Disconnect()
+		}
+		devs, err := scanBLEDevices(timeout, cmd.NameFilter)
+		msg := BleScanResultMessage{Type: "ble_scan_result", Devices: devs, Success: err == nil}
+		if err != nil {
+			msg.Error = err.Error()
+			msg.Devices = []bleScanDevice{}
+		}
+		writeWSJSON(sub, msg)
+
+	case "host_connect":
+		var err error
+		switch cmd.Transport {
+		case hostTransportUART:
+			err = link.ConnectUART(cmd.Port, cmd.Baud)
+		case hostTransportBLE:
+			err = link.ConnectBLE(cmd.Address, cmd.Name)
+		default:
+			writeHostStatus(sub, HostStatusMessage{
+				Type:  "host_status",
+				Error: "transport must be uart or ble",
+			})
+			return
+		}
+		if err != nil {
+			writeHostStatus(sub, hostStatusFromLink(link, false, err.Error()))
+			return
+		}
+		writeHostStatus(sub, hostStatusFromLink(link, true, ""))
+
+	case "host_disconnect":
+		_ = link.Disconnect()
+		writeHostStatus(sub, hostStatusFromLink(link, true, ""))
+
 	case "list_clients":
 		clients, err := link.listClientsPoll()
 		if err != nil {
-			writeClientList(conn, ClientListMessage{
+			writeClientList(sub, ClientListMessage{
 				Type:  "client_list",
 				Error: err.Error(),
 			})
@@ -647,7 +772,7 @@ func handleAccelWSCommand(conn *websocket.Conn, sub *wsSubscriber, data []byte,
 		for _, c := range clients {
 			out = append(out, clientInfoToAPI(c))
 		}
-		writeClientList(conn, ClientListMessage{
+		writeClientList(sub, ClientListMessage{
 			Type:    "client_list",
 			Success: true,
 			Clients: out,
@@ -655,34 +780,34 @@ func handleAccelWSCommand(conn *websocket.Conn, sub *wsSubscriber, data []byte,
 
 	case "set_stream":
 		if cmd.Enable == nil {
-			writeStreamStatus(conn, StreamStatusMessage{
+			writeStreamStatus(sub, StreamStatusMessage{
 				Type:  "stream_status",
 				Error: "enable required",
 			})
 			return
 		}
-		writeStreamStatus(conn, hub.setStream(sub, *cmd.Enable, cmd.IntervalMs, cmd.PreFetch))
+		writeStreamStatus(sub, hub.setStream(sub, *cmd.Enable, cmd.IntervalMs, cmd.PreFetch))
 
 	case "get_stream":
-		writeStreamStatus(conn, hub.getStream(sub))
+		writeStreamStatus(sub, hub.getStream(sub))
 
 	case "set_input_stream":
 		if cmd.ClientID == 0 {
-			writeInputStreamStatus(conn, accelStreamAPIResponse{Error: "client_id required"})
+			writeInputStreamStatus(sub, accelStreamAPIResponse{Error: "client_id required"})
 			return
 		}
 		if cmd.Enable == nil {
-			writeInputStreamStatus(conn, accelStreamAPIResponse{
+			writeInputStreamStatus(sub, accelStreamAPIResponse{
 				ClientID: cmd.ClientID,
 				Error:    "enable required",
 			})
 			return
 		}
-		writeInputStreamStatus(conn, applyAccelStreamClient(link, dash, ctl, cmd.ClientID, *cmd.Enable))
+		writeInputStreamStatus(sub, applyAccelStreamClient(link, dash, ctl, cmd.ClientID, *cmd.Enable))
 
 	case "get_input_stream":
 		if cmd.ClientID == 0 {
-			writeInputStreamStatus(conn, accelStreamAPIResponse{Error: "client_id required"})
+			writeInputStreamStatus(sub, accelStreamAPIResponse{Error: "client_id required"})
 			return
 		}
 		resp, err := link.AccelStreamPoll(&pb.AccelStreamRequest{
@@ -690,7 +815,7 @@ func handleAccelWSCommand(conn *websocket.Conn, sub *wsSubscriber, data []byte,
 			ClientId: cmd.ClientID,
 		})
 		if err != nil {
-			writeInputStreamStatus(conn, accelStreamAPIResponse{
+			writeInputStreamStatus(sub, accelStreamAPIResponse{
 				ClientID: cmd.ClientID,
 				Error:    err.Error(),
 			})
@@ -699,7 +824,7 @@ func handleAccelWSCommand(conn *websocket.Conn, sub *wsSubscriber, data []byte,
 		if ctl != nil {
 			ctl.Set(cmd.ClientID, resp.GetEnabled())
 		}
-		writeInputStreamStatus(conn, accelStreamAPIResponse{
+		writeInputStreamStatus(sub, accelStreamAPIResponse{
 			Enabled:  resp.GetEnabled(),
 			ClientID: resp.GetClientId(),
 			Success:  resp.GetSuccess(),
@@ -708,15 +833,15 @@ func handleAccelWSCommand(conn *websocket.Conn, sub *wsSubscriber, data []byte,
 	case "set_tap_notify":
 		if cmd.AllClients {
 			if cmd.Single == nil || cmd.DoubleTap == nil || cmd.Triple == nil {
-				writeTapNotifyStatus(conn, tapNotifyAPIResponse{Error: "single, double_tap, triple required"})
+				writeTapNotifyStatus(sub, tapNotifyAPIResponse{Error: "single, double_tap, triple required"})
 				return
 			}
 			updated, err := applyTapNotifyAll(link, dash, tapCtl, *cmd.Single, *cmd.DoubleTap, *cmd.Triple)
 			if err != nil {
-				writeTapNotifyStatus(conn, tapNotifyAPIResponse{Error: err.Error()})
+				writeTapNotifyStatus(sub, tapNotifyAPIResponse{Error: err.Error()})
 				return
 			}
-			writeTapNotifyStatus(conn, tapNotifyAPIResponse{
+			writeTapNotifyStatus(sub, tapNotifyAPIResponse{
 				Success:       updated > 0,
 				SlavesUpdated: updated,
 				Single:        *cmd.Single,
@@ -726,21 +851,21 @@ func handleAccelWSCommand(conn *websocket.Conn, sub *wsSubscriber, data []byte,
 			return
 		}
 		if cmd.ClientID == 0 {
-			writeTapNotifyStatus(conn, tapNotifyAPIResponse{Error: "client_id required"})
+			writeTapNotifyStatus(sub, tapNotifyAPIResponse{Error: "client_id required"})
 			return
 		}
 		if cmd.Single == nil || cmd.DoubleTap == nil || cmd.Triple == nil {
-			writeTapNotifyStatus(conn, tapNotifyAPIResponse{
+			writeTapNotifyStatus(sub, tapNotifyAPIResponse{
 				ClientID: cmd.ClientID,
 				Error:    "single, double_tap, triple required",
 			})
 			return
 		}
-		writeTapNotifyStatus(conn, applyTapNotifyClientWS(link, dash, tapCtl, cmd.ClientID, *cmd.Single, *cmd.DoubleTap, *cmd.Triple))
+		writeTapNotifyStatus(sub, applyTapNotifyClientWS(link, dash, tapCtl, cmd.ClientID, *cmd.Single, *cmd.DoubleTap, *cmd.Triple))
 
 	case "get_tap_notify":
 		if cmd.ClientID == 0 {
-			writeTapNotifyStatus(conn, tapNotifyAPIResponse{Error: "client_id required"})
+			writeTapNotifyStatus(sub, tapNotifyAPIResponse{Error: "client_id required"})
 			return
 		}
 		resp, err := link.TapNotifyPoll(&pb.TapNotifyRequest{
@@ -748,7 +873,7 @@ func handleAccelWSCommand(conn *websocket.Conn, sub *wsSubscriber, data []byte,
 			ClientId: cmd.ClientID,
 		})
 		if err != nil {
-			writeTapNotifyStatus(conn, tapNotifyAPIResponse{
+			writeTapNotifyStatus(sub, tapNotifyAPIResponse{
 				ClientID: cmd.ClientID,
 				Error:    err.Error(),
 			})
@@ -757,7 +882,7 @@ func handleAccelWSCommand(conn *websocket.Conn, sub *wsSubscriber, data []byte,
 		if tapCtl != nil {
 			tapCtl.Set(cmd.ClientID, resp.GetSingle(), resp.GetDoubleTap(), resp.GetTriple())
 		}
-		writeTapNotifyStatus(conn, tapNotifyAPIResponse{
+		writeTapNotifyStatus(sub, tapNotifyAPIResponse{
 			ClientID:  cmd.ClientID,
 			Success:   resp.GetSuccess(),
 			Single:    resp.GetSingle(),
@@ -768,36 +893,57 @@ func handleAccelWSCommand(conn *websocket.Conn, sub *wsSubscriber, data []byte,
 	case "set_led_ring":
 		var body ledRingAPIRequest
 		if err := json.Unmarshal(data, &body); err != nil {
-			writeLedRingStatus(conn, ledRingAPIResponse{Error: "invalid JSON"})
+			writeLedRingStatus(sub, ledRingAPIResponse{Error: "invalid JSON"})
 			return
 		}
 		if body.Mode == "" {
-			writeLedRingStatus(conn, ledRingAPIResponse{Error: "mode required"})
+			writeLedRingStatus(sub, ledRingAPIResponse{Error: "mode required"})
 			return
 		}
-		writeLedRingStatus(conn, applyLedRing(link, body))
+		writeLedRingStatus(sub, applyLedRing(link, body))
 
 	case "get_battery":
 		var body batteryAPIRequest
 		if err := json.Unmarshal(data, &body); err != nil {
-			writeBatteryStatus(conn, batteryAPIResponse{Error: "invalid JSON"})
+			writeBatteryStatus(sub, batteryAPIResponse{Error: "invalid JSON"})
 			return
 		}
 		if !body.AllClients && body.ClientID == 0 {
 			body.AllClients = true
 		}
-		writeBatteryStatus(conn, applyBatteryStatus(link, body))
+		writeBatteryStatus(sub, applyBatteryStatus(link, body))
 
 	default:
-		writeStreamStatus(conn, StreamStatusMessage{
+		writeStreamStatus(sub, StreamStatusMessage{
 			Type: "stream_status",
-			Error: "unknown type (list_clients, set_stream, get_stream, set_input_stream, get_input_stream, set_tap_notify, get_tap_notify, set_led_ring, get_battery)",
+			Error: "unknown type (get_host, list_serial_ports, ble_scan, host_connect, host_disconnect, list_clients, set_stream, get_stream, set_input_stream, get_input_stream, set_tap_notify, get_tap_notify, set_led_ring, get_battery)",
 		})
 	}
 }
 
-func serveExternalWS(conn *websocket.Conn, link *managedSerial, dash *wsHub, ctl *accelStreamCtl, tapCtl *tapNotifyCtl, portName string, hub *accelStreamHub) {
-	sub := hub.register(conn, portName)
+func hostStatusFromLink(link *managedSerial, success bool, errMsg string) HostStatusMessage {
+	st := link.HostStatus()
+	return HostStatusMessage{
+		Type:      "host_status",
+		Transport: st["transport"].(string),
+		Endpoint:  st["endpoint"].(string),
+		Connected: st["connected"].(bool),
+		BleName:   st["ble_name"].(string),
+		Success:   success && errMsg == "",
+		Error:     errMsg,
+	}
+}
+
+func writeHostStatus(sub *wsSubscriber, msg HostStatusMessage) {
+	sub.writeJSON(msg)
+}
+
+func writeWSJSON(sub *wsSubscriber, msg any) {
+	sub.writeJSON(msg)
+}
+
+func serveExternalWS(conn *websocket.Conn, link *managedSerial, dash *wsHub, ctl *accelStreamCtl, tapCtl *tapNotifyCtl, hub *accelStreamHub) {
+	sub := hub.register(conn, link)
 	defer hub.unregister(conn)
 	defer conn.Close()
 
@@ -806,11 +952,12 @@ func serveExternalWS(conn *websocket.Conn, link *managedSerial, dash *wsHub, ctl
 		if err != nil {
 			return
 		}
-		handleAccelWSCommand(conn, sub, data, link, dash, ctl, tapCtl, hub)
+		handleAccelWSCommand(sub, data, link, dash, ctl, tapCtl, hub)
 	}
 }
 
 func mountExternalAPI(mux *http.ServeMux, portName string, defaultInterval time.Duration, hub *accelStreamHub, link *managedSerial, dash *wsHub, ctl *accelStreamCtl, tapCtl *tapNotifyCtl) {
+	_ = portName
 	defMs := int(defaultInterval / time.Millisecond)
 	mux.HandleFunc("/", func(w http.ResponseWriter, r *http.Request) {
 		if r.URL.Path != "/" && r.URL.Path != "/api/v1" && r.URL.Path != "/api/v1/" {
@@ -821,17 +968,21 @@ func mountExternalAPI(mux *http.ServeMux, portName string, defaultInterval time.
 			http.Error(w, "method not allowed", http.StatusMethodNotAllowed)
 			return
 		}
+		st := link.HostStatus()
 		writeJSON(w, http.StatusOK, APIInfoResponse{
 			Name:              "powerpod-external-api",
 			Version:           "1",
-			SerialPort:        portName,
+			SerialPort:        st["endpoint"].(string),
+			Transport:         st["transport"].(string),
+			Endpoint:          st["endpoint"].(string),
+			Connected:         st["connected"].(bool),
 			WebSocket:         "/ws",
 			DefaultIntervalMs: defMs,
 			DefaultPreFetchMs: defaultPreFetchMs,
 			MinIntervalMs:     int(minAPIStreamInterval / time.Millisecond),
 			MaxIntervalMs:     int(maxAPIStreamInterval / time.Millisecond),
 			TapDisplayMinMs:   apiTapDisplayMinMs,
-			Description:       "WebSocket: set_input_stream + set_stream for input (accel + tap); set_tap_notify configures slave tap kinds",
+			Description:       "WebSocket: host_connect/ble_scan + set_input_stream + set_stream for input (accel + tap)",
 		})
 	})
 
@@ -841,7 +992,7 @@ func mountExternalAPI(mux *http.ServeMux, portName string, defaultInterval time.
 			log.Printf("api websocket upgrade: %v", err)
 			return
 		}
-		serveExternalWS(conn, link, dash, ctl, tapCtl, portName, hub)
+		serveExternalWS(conn, link, dash, ctl, tapCtl, hub)
 	})
 }
 

goTool/ble_link.go

@@ -0,0 +1,279 @@
+package main
+
+import (
+	"fmt"
+	"log"
+	"sync"
+	"time"
+
+	"tinygo.org/x/bluetooth"
+
+	pb "powerpod/gotool/pb"
+	uartframe "powerpod/gotool/uart"
+)
+
+const (
+	bleServiceUUID = "6e400001-b5a3-f393-e0a9-e50e24dcca9e"
+	bleCharUUID    = "6e400002-b5a3-f393-e0a9-e50e24dcca9e"
+	bleDefaultName = "Powerpod"
+)
+
+type bleLink struct {
+	device   bluetooth.Device
+	char     bluetooth.DeviceCharacteristic
+	mu       sync.Mutex
+	parser   *uartframe.Parser
+	respCh   chan []byte
+	streamCh chan []byte
+	quiet    bool
+}
+
+func openBLE(name string, settle time.Duration) (*bleLink, error) {
+	if name == "" {
+		name = bleDefaultName
+	}
+	adapter := bluetooth.DefaultAdapter
+	if err := adapter.Enable(); err != nil {
+		return nil, fmt.Errorf("enable bluetooth adapter: %w (check BlueZ / permissions)", err)
+	}
+
+	log.Printf("BLE scanning for %q…", name)
+	var foundAddr bluetooth.Address
+	var found bool
+	go func() {
+		time.Sleep(15 * time.Second)
+		_ = adapter.StopScan()
+	}()
+	err := adapter.Scan(func(a *bluetooth.Adapter, result bluetooth.ScanResult) {
+		if result.LocalName() != name {
+			return
+		}
+		foundAddr = result.Address
+		found = true
+		_ = a.StopScan()
+	})
+	if err != nil {
+		return nil, fmt.Errorf("scan: %w", err)
+	}
+	if !found {
+		return nil, fmt.Errorf("device %q not found (check DIP8=BLE and advertising)", name)
+	}
+	return connectBLEDevice(foundAddr, settle)
+}
+
+func openBLEAddress(addrStr string, settle time.Duration) (*bleLink, error) {
+	adapter := bluetooth.DefaultAdapter
+	if err := adapter.Enable(); err != nil {
+		return nil, fmt.Errorf("enable bluetooth adapter: %w (check BlueZ / permissions)", err)
+	}
+	if mac, err := bluetooth.ParseMAC(addrStr); err == nil {
+		var addr bluetooth.Address
+		addr.Set(mac.String())
+		return connectBLEDevice(addr, settle)
+	}
+	// Fallback: scan until address string matches
+	log.Printf("BLE resolving address %s via scan…", addrStr)
+	var foundAddr bluetooth.Address
+	var found bool
+	go func() {
+		time.Sleep(15 * time.Second)
+		_ = adapter.StopScan()
+	}()
+	err := adapter.Scan(func(a *bluetooth.Adapter, result bluetooth.ScanResult) {
+		if result.Address.String() != addrStr {
+			return
+		}
+		foundAddr = result.Address
+		found = true
+		_ = a.StopScan()
+	})
+	if err != nil {
+		return nil, fmt.Errorf("scan for address: %w", err)
+	}
+	if !found {
+		return nil, fmt.Errorf("BLE address %s not found", addrStr)
+	}
+	return connectBLEDevice(foundAddr, settle)
+}
+
+func connectBLEDevice(addr bluetooth.Address, settle time.Duration) (*bleLink, error) {
+	svcUUID, err := bluetooth.ParseUUID(bleServiceUUID)
+	if err != nil {
+		return nil, err
+	}
+	chrUUID, err := bluetooth.ParseUUID(bleCharUUID)
+	if err != nil {
+		return nil, err
+	}
+
+	adapter := bluetooth.DefaultAdapter
+	log.Printf("BLE connecting to %s…", addr.String())
+	device, err := adapter.Connect(addr, bluetooth.ConnectionParams{})
+	if err != nil {
+		return nil, fmt.Errorf("connect: %w", err)
+	}
+
+	services, err := device.DiscoverServices([]bluetooth.UUID{svcUUID})
+	if err != nil || len(services) == 0 {
+		_ = device.Disconnect()
+		return nil, fmt.Errorf("discover service: %v", err)
+	}
+	chars, err := services[0].DiscoverCharacteristics([]bluetooth.UUID{chrUUID})
+	if err != nil || len(chars) == 0 {
+		_ = device.Disconnect()
+		return nil, fmt.Errorf("discover characteristic: %v", err)
+	}
+	char := chars[0]
+
+	if mtu, err := char.GetMTU(); err == nil {
+		log.Printf("BLE ATT MTU=%d", mtu)
+		if mtu < 203 {
+			log.Printf("warning: MTU %d < 203 — large frames/stream ticks may fail", mtu)
+		}
+	}
+
+	link := &bleLink{
+		device:    device,
+		char:     char,
+		parser:   uartframe.NewParser(),
+		respCh:   make(chan []byte, 8),
+		streamCh: make(chan []byte, 64),
+	}
+
+	if err := char.EnableNotifications(func(buf []byte) {
+		link.onNotify(buf)
+	}); err != nil {
+		_ = device.Disconnect()
+		return nil, fmt.Errorf("enable notifications: %w (CCCD required before commands)", err)
+	}
+
+	if settle <= 0 {
+		settle = time.Second
+	}
+	log.Printf("BLE connected; settling %v…", settle)
+	time.Sleep(settle)
+
+	return link, nil
+}
+
+func (b *bleLink) onNotify(buf []byte) {
+	for _, by := range buf {
+		payload, ok, err := b.parser.Feed(by)
+		if err != nil || !ok {
+			continue
+		}
+		if len(payload) == 0 {
+			continue
+		}
+		if payload[0] == byte(pb.MessageType_BLE_STREAM_TICK) {
+			select {
+			case b.streamCh <- payload:
+			default:
+			}
+			continue
+		}
+		select {
+		case b.respCh <- payload:
+		default:
+			// Prefer dropping the oldest queued frame so a late/stale reply
+			// does not block the matching response for the in-flight command.
+			select {
+			case <-b.respCh:
+			default:
+			}
+			select {
+			case b.respCh <- payload:
+			default:
+				log.Printf("BLE: response channel full, dropping frame type=0x%02x", payload[0])
+			}
+		}
+	}
+}
+
+func (b *bleLink) Close() error {
+	return b.device.Disconnect()
+}
+
+func (b *bleLink) exchange(cmdID byte, cmdName string) ([]byte, error) {
+	return b.exchangePayload([]byte{cmdID}, cmdName)
+}
+
+func (b *bleLink) exchangePayload(payload []byte, cmdName string) ([]byte, error) {
+	return b.exchangePayloadTimeout(payload, cmdName, readTimeout)
+}
+
+func (b *bleLink) exchangePayloadTimeout(payload []byte, cmdName string, timeout time.Duration) ([]byte, error) {
+	b.mu.Lock()
+	defer b.mu.Unlock()
+
+	if len(payload) == 0 {
+		return nil, fmt.Errorf("empty payload")
+	}
+	expect := payload[0]
+	if timeout <= 0 {
+		timeout = readTimeout
+	}
+
+	frame, err := uartframe.EncodeFrame(payload)
+	if err != nil {
+		return nil, fmt.Errorf("encode frame: %w", err)
+	}
+	if !b.quiet {
+		log.Printf("BLE sending %s (%d bytes)", cmdName, len(frame))
+	}
+
+	for {
+		select {
+		case <-b.respCh:
+		default:
+			goto sent
+		}
+	}
+sent:
+	if _, err := b.char.WriteWithoutResponse(frame); err != nil {
+		return nil, fmt.Errorf("BLE write: %w (check DIP8=BLE)", err)
+	}
+
+	deadline := time.Now().Add(timeout)
+	for {
+		remain := time.Until(deadline)
+		if remain <= 0 {
+			return nil, fmt.Errorf("BLE read timeout for %s (check DIP8=BLE / -ble)", cmdName)
+		}
+		timer := time.NewTimer(remain)
+		select {
+		case resp := <-b.respCh:
+			timer.Stop()
+			if len(resp) == 0 {
+				continue
+			}
+			if resp[0] != expect {
+				// Stale reply (e.g. late BATTERY_STATUS after a short timeout).
+				if !b.quiet {
+					log.Printf("BLE: discard type=0x%02x while waiting for 0x%02x (%s)", resp[0], expect, cmdName)
+				}
+				continue
+			}
+			if !b.quiet {
+				log.Printf("BLE response (%d bytes)", len(resp))
+			}
+			return resp, nil
+		case <-timer.C:
+			return nil, fmt.Errorf("BLE read timeout for %s (check DIP8=BLE / -ble)", cmdName)
+		}
+	}
+}
+
+func (b *bleLink) NextStreamTick(timeout time.Duration) ([]byte, error) {
+	if timeout <= 0 {
+		timeout = 5 * time.Second
+	}
+	timer := time.NewTimer(timeout)
+	defer timer.Stop()
+	select {
+	case p := <-b.streamCh:
+		return p, nil
+	case <-timer.C:
+		return nil, fmt.Errorf("BLE stream tick timeout")
+	}
+}

goTool/ble_measure.go

@@ -0,0 +1,224 @@
+package main
+
+import (
+	"fmt"
+	"math"
+	"sort"
+	"time"
+
+	pb "powerpod/gotool/pb"
+
+	"google.golang.org/protobuf/proto"
+)
+
+type latencyStats struct {
+	N      int     `json:"n"`
+	MinMs  float64 `json:"min_ms"`
+	MedMs  float64 `json:"median_ms"`
+	MeanMs float64 `json:"mean_ms"`
+	MaxMs  float64 `json:"max_ms"`
+}
+
+type bleRttResult struct {
+	Success bool         `json:"success"`
+	Count   int          `json:"count"`
+	Warmup  int          `json:"warmup"`
+	Stats   latencyStats `json:"stats"`
+	Error   string       `json:"error,omitempty"`
+}
+
+type bleStreamResult struct {
+	Success     bool         `json:"success"`
+	Received    int          `json:"received"`
+	Requested   int          `json:"requested"`
+	PeriodMs    uint32       `json:"period_ms"`
+	TolMs       float64      `json:"tol_ms"`
+	OutsideTol  int          `json:"outside_tol"`
+	WindowOK    bool         `json:"window_ok"`
+	DTEsp       latencyStats `json:"dt_esp_ms"`
+	DRPc        latencyStats `json:"dr_pc_ms"`
+	ExtraVsFirst latencyStats `json:"extra_vs_first_ms"`
+	Error       string       `json:"error,omitempty"`
+}
+
+func measureBleRtt(h hostConn, count, warmup int, settle time.Duration) bleRttResult {
+	out := bleRttResult{Count: count, Warmup: warmup}
+	if count < 1 {
+		out.Error = "count must be >= 1"
+		return out
+	}
+	if warmup < 0 {
+		out.Error = "warmup must be >= 0"
+		return out
+	}
+	if settle > 0 {
+		time.Sleep(settle)
+	}
+
+	samples := make([]float64, 0, count)
+	total := warmup + count
+	for i := 0; i < total; i++ {
+		t0 := time.Now()
+		if _, err := hostGetVersion(h); err != nil {
+			out.Error = fmt.Sprintf("VERSION round-trip %d: %v", i, err)
+			return out
+		}
+		ms := float64(time.Since(t0).Microseconds()) / 1000.0
+		if i >= warmup {
+			samples = append(samples, ms)
+		}
+	}
+	out.Stats = makeLatencyStats(samples)
+	out.Success = true
+	return out
+}
+
+func measureBleStream(h hostConn, clientID, periodMs uint32, count int, tolMs, timeoutSec float64) bleStreamResult {
+	out := bleStreamResult{
+		Requested: count,
+		PeriodMs:  periodMs,
+		TolMs:     tolMs,
+	}
+	if periodMs < 8 || periodMs > 16 {
+		out.Error = "period_ms must be 8..16"
+		return out
+	}
+	if count < 2 {
+		out.Error = "count must be >= 2"
+		return out
+	}
+	sc, ok := h.(hostStreamConn)
+	if !ok {
+		out.Error = "BLE stream ticks require BLE host"
+		return out
+	}
+
+	req := &pb.AccelStreamRequest{
+		Write:    true,
+		Enable:   true,
+		PeriodMs: periodMs,
+	}
+	if clientID == 0 {
+		req.AllClients = true
+	} else {
+		req.ClientId = clientID
+	}
+	resp, err := hostAccelStream(h, req)
+	if err != nil {
+		out.Error = err.Error()
+		return out
+	}
+	if !resp.GetSuccess() {
+		out.Error = "accel stream enable failed"
+		return out
+	}
+
+	type sample struct {
+		espUs uint64
+		pcT  float64
+	}
+	samples := make([]sample, 0, count)
+	deadline := time.Now().Add(time.Duration(timeoutSec * float64(time.Second)))
+	if timeoutSec <= 0 {
+		deadline = time.Now().Add(15 * time.Second)
+	}
+
+	for len(samples) < count {
+		remain := time.Until(deadline)
+		if remain <= 0 {
+			break
+		}
+		payload, err := sc.NextStreamTick(remain)
+		if err != nil {
+			break
+		}
+		pcT := time.Now().UnixMicro()
+		var msg pb.UartMessage
+		if err := proto.Unmarshal(payload[1:], &msg); err != nil {
+			continue
+		}
+		tick := msg.GetBleStreamTick()
+		if tick == nil {
+			continue
+		}
+		samples = append(samples, sample{espUs: tick.GetEspTimestampUs(), pcT: float64(pcT)})
+	}
+
+	off := &pb.AccelStreamRequest{Write: true, Enable: false, AllClients: req.AllClients, ClientId: req.ClientId}
+	_, _ = hostAccelStream(h, off)
+
+	out.Received = len(samples)
+	if len(samples) < 2 {
+		out.Error = fmt.Sprintf("need >=2 ticks, got %d (stream running / DIP8=BLE?)", len(samples))
+		return out
+	}
+
+	var dT, dR, extra []float64
+	esp0 := samples[0].espUs
+	pc0 := samples[0].pcT
+	for i := 1; i < len(samples); i++ {
+		dT = append(dT, float64(samples[i].espUs-samples[i-1].espUs)/1000.0)
+		dR = append(dR, (samples[i].pcT-samples[i-1].pcT)/1000.0)
+		relEsp := float64(samples[i].espUs-esp0) / 1000.0
+		relPc := (samples[i].pcT - pc0) / 1000.0
+		extra = append(extra, relPc-relEsp)
+	}
+
+	period := float64(periodMs)
+	outCount := 0
+	for _, dt := range dT {
+		if math.Abs(dt-period) > tolMs {
+			outCount++
+		}
+	}
+	out.OutsideTol = outCount
+	out.WindowOK = outCount*2 <= len(dT)
+	out.DTEsp = makeLatencyStats(dT)
+	out.DRPc = makeLatencyStats(dR)
+	out.ExtraVsFirst = makeLatencyStats(extra)
+	out.Success = true
+	return out
+}
+
+func makeLatencyStats(v []float64) latencyStats {
+	if len(v) == 0 {
+		return latencyStats{}
+	}
+	s := append([]float64(nil), v...)
+	sort.Float64s(s)
+	return latencyStats{
+		N:      len(s),
+		MinMs:  s[0],
+		MedMs:  percentile(s, 0.5),
+		MeanMs: mean(s),
+		MaxMs:  s[len(s)-1],
+	}
+}
+
+func mean(v []float64) float64 {
+	if len(v) == 0 {
+		return math.NaN()
+	}
+	var s float64
+	for _, x := range v {
+		s += x
+	}
+	return s / float64(len(v))
+}
+
+func percentile(sorted []float64, p float64) float64 {
+	if len(sorted) == 0 {
+		return math.NaN()
+	}
+	if len(sorted) == 1 {
+		return sorted[0]
+	}
+	idx := p * float64(len(sorted)-1)
+	lo := int(idx)
+	hi := lo + 1
+	if hi >= len(sorted) {
+		return sorted[lo]
+	}
+	frac := idx - float64(lo)
+	return sorted[lo]*(1-frac) + sorted[hi]*frac
+}

goTool/cache_status.go

@@ -1,6 +1,12 @@
 package main
 
-import "powerpod/gotool/pb"
+import (
+	"fmt"
+
+	"powerpod/gotool/pb"
+
+	"google.golang.org/protobuf/proto"
+)
 
 // accelSamplesFromCacheStatus maps combined CACHE_STATUS entries to AccelSample
 // (for dashboard / WebSocket accel push).
@@ -47,3 +53,31 @@ func tapEventsFromCacheStatus(r *pb.CacheStatusResponse) []*pb.TapEvent {
 	}
 	return out
 }
+
+// cacheStatusFromBLEStreamPayload parses a framed BLE_STREAM_TICK payload
+// (type byte + protobuf UartMessage) into a CacheStatusResponse-shaped view.
+func cacheStatusFromBLEStreamPayload(payload []byte) (*pb.CacheStatusResponse, error) {
+	tick, err := parseBleStreamTickPayload(payload)
+	if err != nil {
+		return nil, err
+	}
+	return &pb.CacheStatusResponse{Clients: tick.GetClients()}, nil
+}
+
+func parseBleStreamTickPayload(payload []byte) (*pb.BleStreamTick, error) {
+	if len(payload) < 2 {
+		return nil, fmt.Errorf("BLE stream tick too short")
+	}
+	if payload[0] != byte(pb.MessageType_BLE_STREAM_TICK) {
+		return nil, fmt.Errorf("unexpected BLE tick type 0x%02x", payload[0])
+	}
+	var msg pb.UartMessage
+	if err := proto.Unmarshal(payload[1:], &msg); err != nil {
+		return nil, err
+	}
+	tick := msg.GetBleStreamTick()
+	if tick == nil {
+		return nil, fmt.Errorf("missing ble_stream_tick")
+	}
+	return tick, nil
+}

goTool/client_api.go

@@ -64,16 +64,14 @@ func decodeBatteryStatusPayload(payload []byte) (*pb.BatteryStatusResponse, erro
 }
 
 func (m *managedSerial) BatteryStatus(req *pb.BatteryStatusRequest) (*pb.BatteryStatusResponse, error) {
-	var resp *pb.BatteryStatusResponse
-	err := m.withPort(func(sp *serialPort) error {
-		var e error
-		resp, e = sp.batteryStatus(req)
-		return e
-	})
-	return resp, err
+	return m.batteryStatusExchange(false, req)
 }
 
 func (m *managedSerial) BatteryStatusPoll(req *pb.BatteryStatusRequest) (*pb.BatteryStatusResponse, error) {
+	return m.batteryStatusExchange(true, req)
+}
+
+func (m *managedSerial) batteryStatusExchange(poll bool, req *pb.BatteryStatusRequest) (*pb.BatteryStatusResponse, error) {
 	msg := &pb.UartMessage{
 		Type: pb.MessageType_BATTERY_STATUS,
 		Payload: &pb.UartMessage_BatteryStatusRequest{
@@ -85,23 +83,18 @@ func (m *managedSerial) BatteryStatusPoll(req *pb.BatteryStatusRequest) (*pb.Bat
 		return nil, fmt.Errorf("encode: %w", err)
 	}
 	payload := append([]byte{byte(pb.MessageType_BATTERY_STATUS)}, body...)
-	respPayload, err := m.batteryStatusPayloadPoll(payload)
+	var respPayload []byte
+	if poll {
+		respPayload, err = m.exchangePayloadMode(true, payload, "BATTERY_STATUS", batteryReadTimeout)
+	} else {
+		respPayload, err = m.exchangePayloadMode(false, payload, "BATTERY_STATUS", batteryReadTimeout)
+	}
 	if err != nil {
 		return nil, err
 	}
 	return decodeBatteryStatusPayload(respPayload)
 }
 
-func (m *managedSerial) batteryStatusPayloadPoll(payload []byte) ([]byte, error) {
-	var resp []byte
-	err := m.withPortPoll(func(sp *serialPort) error {
-		var e error
-		resp, e = sp.exchangePayloadForBattery(payload, "BATTERY_STATUS")
-		return e
-	})
-	return resp, err
-}
-
 func (s *serialPort) batteryStatus(req *pb.BatteryStatusRequest) (*pb.BatteryStatusResponse, error) {
 	msg := &pb.UartMessage{
 		Type: pb.MessageType_BATTERY_STATUS,
@@ -122,11 +115,11 @@ func (s *serialPort) batteryStatus(req *pb.BatteryStatusRequest) (*pb.BatterySta
 }
 
 func (m *managedSerial) AccelStream(req *pb.AccelStreamRequest) (*pb.AccelStreamResponse, error) {
-	return m.accelStreamVia(m.withPort, req)
+	return m.accelStreamExchange(false, req)
 }
 
 func (m *managedSerial) AccelStreamPoll(req *pb.AccelStreamRequest) (*pb.AccelStreamResponse, error) {
-	return m.accelStreamVia(m.withPortPoll, req)
+	return m.accelStreamExchange(true, req)
 }
 
 // SetAccelStream enables or disables the ESP-NOW accel stream for one slave (master UART).
@@ -154,24 +147,41 @@ func (m *managedSerial) GetAccelStream(clientID uint32) (bool, error) {
 }
 
 func (m *managedSerial) TapNotify(req *pb.TapNotifyRequest) (*pb.TapNotifyResponse, error) {
-	return m.tapNotifyVia(m.withPort, req)
+	return m.tapNotifyExchange(false, req)
 }
 
 func (m *managedSerial) TapNotifyPoll(req *pb.TapNotifyRequest) (*pb.TapNotifyResponse, error) {
-	return m.tapNotifyVia(m.withPortPoll, req)
+	return m.tapNotifyExchange(true, req)
 }
 
-func (m *managedSerial) tapNotifyVia(
-	portFn func(func(*serialPort) error) error,
-	req *pb.TapNotifyRequest,
-) (*pb.TapNotifyResponse, error) {
-	var resp *pb.TapNotifyResponse
-	err := portFn(func(sp *serialPort) error {
-		var e error
-		resp, e = sp.TapNotify(req)
-		return e
-	})
-	return resp, err
+func (m *managedSerial) tapNotifyExchange(poll bool, req *pb.TapNotifyRequest) (*pb.TapNotifyResponse, error) {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_TAP_NOTIFY,
+		Payload: &pb.UartMessage_TapNotifyRequest{TapNotifyRequest: req},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_TAP_NOTIFY)}, body...)
+	var respPayload []byte
+	if poll {
+		respPayload, err = m.exchangePayloadPoll(payload, "TAP_NOTIFY")
+	} else {
+		respPayload, err = m.exchangePayload(payload, "TAP_NOTIFY")
+	}
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetTapNotifyResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing tap_notify_response")
+	}
+	return r, nil
 }
 
 func (m *managedSerial) readCacheStatusPoll() (*pb.CacheStatusResponse, error) {
@@ -204,69 +214,138 @@ func decodeCacheStatusPayload(payload []byte) (*pb.CacheStatusResponse, error) {
 	return r, nil
 }
 
-func (m *managedSerial) accelStreamVia(
-	portFn func(func(*serialPort) error) error,
-	req *pb.AccelStreamRequest,
-) (*pb.AccelStreamResponse, error) {
-	var resp *pb.AccelStreamResponse
-	err := portFn(func(sp *serialPort) error {
-		var e error
-		resp, e = sp.AccelStream(req)
-		return e
-	})
-	return resp, err
+func (m *managedSerial) accelStreamExchange(poll bool, req *pb.AccelStreamRequest) (*pb.AccelStreamResponse, error) {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_ACCEL_STREAM,
+		Payload: &pb.UartMessage_AccelStreamRequest{AccelStreamRequest: req},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_ACCEL_STREAM)}, body...)
+	var respPayload []byte
+	if poll {
+		respPayload, err = m.exchangePayloadPoll(payload, "ACCEL_STREAM")
+	} else {
+		respPayload, err = m.exchangePayload(payload, "ACCEL_STREAM")
+	}
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetAccelStreamResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing accel_stream_response")
+	}
+	return r, nil
 }
 
 func (m *managedSerial) AccelDeadzone(req *pb.AccelDeadzoneRequest) (*pb.AccelDeadzoneResponse, error) {
-	return m.accelDeadzoneVia(m.withPort, req)
+	return m.accelDeadzoneExchange(false, req)
 }
 
 func (m *managedSerial) AccelDeadzonePoll(req *pb.AccelDeadzoneRequest) (*pb.AccelDeadzoneResponse, error) {
-	return m.accelDeadzoneVia(m.withPortPoll, req)
+	return m.accelDeadzoneExchange(true, req)
 }
 
 func (m *managedSerial) TapConfig(req *pb.TapConfigRequest) (*pb.TapConfigResponse, error) {
-	return m.tapConfigVia(m.withPort, req)
+	return m.tapConfigExchange(false, req)
 }
 
 func (m *managedSerial) TapConfigPoll(req *pb.TapConfigRequest) (*pb.TapConfigResponse, error) {
-	return m.tapConfigVia(m.withPortPoll, req)
+	return m.tapConfigExchange(true, req)
 }
 
-func (m *managedSerial) tapConfigVia(
-	portFn func(func(*serialPort) error) error,
-	req *pb.TapConfigRequest,
-) (*pb.TapConfigResponse, error) {
-	var resp *pb.TapConfigResponse
-	err := portFn(func(sp *serialPort) error {
-		var e error
-		resp, e = sp.TapConfig(req)
-		return e
-	})
-	return resp, err
+func (m *managedSerial) tapConfigExchange(poll bool, req *pb.TapConfigRequest) (*pb.TapConfigResponse, error) {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_TAP_CONFIG,
+		Payload: &pb.UartMessage_TapConfigRequest{TapConfigRequest: req},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_TAP_CONFIG)}, body...)
+	var respPayload []byte
+	if poll {
+		respPayload, err = m.exchangePayloadPoll(payload, "TAP_CONFIG")
+	} else {
+		respPayload, err = m.exchangePayload(payload, "TAP_CONFIG")
+	}
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetTapConfigResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing tap_config_response")
+	}
+	return r, nil
 }
 
-func (m *managedSerial) accelDeadzoneVia(
-	portFn func(func(*serialPort) error) error,
-	req *pb.AccelDeadzoneRequest,
-) (*pb.AccelDeadzoneResponse, error) {
-	var resp *pb.AccelDeadzoneResponse
-	err := portFn(func(sp *serialPort) error {
-		var e error
-		resp, e = sp.AccelDeadzone(req)
-		return e
-	})
-	return resp, err
+func (m *managedSerial) accelDeadzoneExchange(poll bool, req *pb.AccelDeadzoneRequest) (*pb.AccelDeadzoneResponse, error) {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_ACCEL_DEADZONE,
+		Payload: &pb.UartMessage_AccelDeadzoneRequest{AccelDeadzoneRequest: req},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_ACCEL_DEADZONE)}, body...)
+	var respPayload []byte
+	if poll {
+		respPayload, err = m.exchangePayloadPoll(payload, "ACCEL_DEADZONE")
+	} else {
+		respPayload, err = m.exchangePayload(payload, "ACCEL_DEADZONE")
+	}
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetAccelDeadzoneResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing accel_deadzone_response")
+	}
+	return r, nil
 }
 
 func (m *managedSerial) EspnowUnicastTest(clientID, seq uint32) (*pb.EspNowUnicastTestResponse, error) {
-	var resp *pb.EspNowUnicastTestResponse
-	err := m.withPort(func(sp *serialPort) error {
-		var e error
-		resp, e = sp.EspnowUnicastTest(clientID, seq)
-		return e
-	})
-	return resp, err
+	req := &pb.EspNowUnicastTestRequest{ClientId: clientID, Seq: seq}
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_ESPNOW_UNICAST_TEST,
+		Payload: &pb.UartMessage_EspnowUnicastTestRequest{
+			EspnowUnicastTestRequest: req,
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_ESPNOW_UNICAST_TEST)}, body...)
+	respPayload, err := m.exchangePayload(payload, "ESPNOW_UNICAST_TEST")
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetEspnowUnicastTestResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing espnow_unicast_test_response")
+	}
+	return r, nil
 }
 
 func decodeVersionPayload(payload []byte) (*pb.VersionResponse, error) {
@@ -520,26 +599,15 @@ func (s *serialPort) echoPing(clientID uint32) (*EchoPingResult, error) {
 }
 
 func (m *managedSerial) FindMe(clientID uint32) error {
-	return m.withPort(func(sp *serialPort) error {
-		return runFindMeClient(sp, clientID)
-	})
+	return hostFindMe(m, clientID)
 }
 
 func (m *managedSerial) SetLogLevel(write bool, level uint32) (*pb.SetLogLevelResponse, error) {
-	var resp *pb.SetLogLevelResponse
-	err := m.withPort(func(sp *serialPort) error {
-		var e error
-		resp, e = runSetLogLevelClient(sp, write, level)
-		return e
-	})
-	return resp, err
+	return hostSetLogLevel(m, write, level)
 }
 
 func (m *managedSerial) Restart(clientID uint32) error {
-	err := m.withPort(func(sp *serialPort) error {
-		return runRestartClient(sp, clientID)
-	})
-	if err != nil {
+	if err := hostRestart(m, clientID); err != nil {
 		return err
 	}
 	if clientID == 0 {
@@ -618,13 +686,7 @@ func (s *serialPort) EchoPing(clientID uint32) (*EchoPingResult, error) {
 }
 
 func (m *managedSerial) EchoPing(clientID uint32) (*EchoPingResult, error) {
-	var result *EchoPingResult
-	err := m.withPort(func(sp *serialPort) error {
-		var e error
-		result, e = sp.echoPing(clientID)
-		return e
-	})
-	return result, err
+	return hostEchoPing(m, clientID)
 }
 
 func (s *serialPort) LedRing(req *pb.LedRingProgressRequest) (*pb.LedRingProgressResponse, error) {
@@ -632,13 +694,7 @@ func (s *serialPort) LedRing(req *pb.LedRingProgressRequest) (*pb.LedRingProgres
 }
 
 func (m *managedSerial) LedRing(req *pb.LedRingProgressRequest) (*pb.LedRingProgressResponse, error) {
-	var resp *pb.LedRingProgressResponse
-	err := m.withPort(func(sp *serialPort) error {
-		var e error
-		resp, e = sp.LedRing(req)
-		return e
-	})
-	return resp, err
+	return hostLedRing(m, req)
 }
 
 func (s *serialPort) FindMe(clientID uint32) (*pb.EspNowFindMeResponse, error) {

goTool/cmd_accel_stream.go

@@ -0,0 +1,44 @@
+package main
+
+import (
+	"flag"
+	"fmt"
+
+	pb "powerpod/gotool/pb"
+)
+
+func runAccelStreamCmd(h hostConn, args []string) error {
+	fs := flag.NewFlagSet("accel-stream", flag.ExitOnError)
+	clientID := fs.Uint("client", 0, "slave client id (0 with -all)")
+	all := fs.Bool("all", false, "all registered clients")
+	enable := fs.Bool("enable", true, "enable stream")
+	disable := fs.Bool("disable", false, "disable stream")
+	period := fs.Uint("period", 0, "BLE push period_ms 8–16 (0=leave/default)")
+	if err := fs.Parse(args); err != nil {
+		return err
+	}
+	on := *enable
+	if *disable {
+		on = false
+	}
+	if !*all && *clientID == 0 {
+		return fmt.Errorf("need -client ID or -all")
+	}
+	req := &pb.AccelStreamRequest{
+		Write:    true,
+		Enable:   on,
+		PeriodMs: uint32(*period),
+	}
+	if *all {
+		req.AllClients = true
+	} else {
+		req.ClientId = uint32(*clientID)
+	}
+	r, err := hostAccelStream(h, req)
+	if err != nil {
+		return err
+	}
+	fmt.Printf("accel-stream: success=%v enabled=%v client_id=%d slaves_updated=%d\n",
+		r.GetSuccess(), r.GetEnabled(), r.GetClientId(), r.GetSlavesUpdated())
+	return nil
+}

goTool/cmd_ble_rtt.go

@@ -0,0 +1,26 @@
+package main
+
+import (
+	"flag"
+	"fmt"
+	"time"
+)
+
+func runBleRtt(h hostConn, args []string) error {
+	fs := flag.NewFlagSet("ble-rtt", flag.ExitOnError)
+	count := fs.Int("count", 50, "number of measured VERSION round-trips")
+	settle := fs.Float64("settle", 0, "extra settle seconds before measurement (0 = already settled on connect)")
+	warmup := fs.Int("warmup", 5, "discarded warm-up round-trips")
+	if err := fs.Parse(args); err != nil {
+		return err
+	}
+
+	out := measureBleRtt(h, *count, *warmup, time.Duration(*settle*float64(time.Second)))
+	if !out.Success {
+		return fmt.Errorf("%s", out.Error)
+	}
+	fmt.Printf("ble-rtt (VERSION): n=%d warmup=%d\n", out.Stats.N, out.Warmup)
+	fmt.Printf("  min=%.3f  median=%.3f  mean=%.3f  max=%.3f  ms\n",
+		out.Stats.MinMs, out.Stats.MedMs, out.Stats.MeanMs, out.Stats.MaxMs)
+	return nil
+}

goTool/cmd_ble_stream.go

@@ -0,0 +1,40 @@
+package main
+
+import (
+	"flag"
+	"fmt"
+)
+
+func runBleStream(h hostConn, args []string) error {
+	fs := flag.NewFlagSet("ble-stream", flag.ExitOnError)
+	clientID := fs.Uint("client", 0, "slave client id (0 = all_clients)")
+	periodMs := fs.Uint("period", 16, "BLE push period_ms (8–16)")
+	count := fs.Int("count", 50, "number of BleStreamTick samples")
+	tolMs := fs.Float64("tol", 2.0, "tolerance ms around period for window_ok")
+	duration := fs.Float64("timeout", 15.0, "max seconds waiting for ticks")
+	if err := fs.Parse(args); err != nil {
+		return err
+	}
+
+	fmt.Printf("accel stream on; period_ms=%d; collecting %d ticks…\n", *periodMs, *count)
+	out := measureBleStream(h, uint32(*clientID), uint32(*periodMs), *count, *tolMs, *duration)
+	if !out.Success {
+		return fmt.Errorf("%s", out.Error)
+	}
+	fmt.Printf("received=%d/%d period_ms=%d tol=±%.1f ms\n", out.Received, out.Requested, out.PeriodMs, out.TolMs)
+	printStat("dT ESP inter-depart", out.DTEsp)
+	printStat("dR PC  inter-arrive", out.DRPc)
+	printStat("extra vs first", out.ExtraVsFirst)
+	fmt.Printf("outside_tol=%d/%d  window_ok=%s\n", out.OutsideTol, out.DTEsp.N,
+		map[bool]string{true: "yes", false: "no"}[out.WindowOK])
+	return nil
+}
+
+func printStat(name string, s latencyStats) {
+	if s.N == 0 {
+		fmt.Printf("%s: (none)\n", name)
+		return
+	}
+	fmt.Printf("%s: n=%d  min=%.3f  median=%.3f  mean=%.3f  max=%.3f  ms\n",
+		name, s.N, s.MinMs, s.MedMs, s.MeanMs, s.MaxMs)
+}

goTool/cmd_serve.go

@@ -20,21 +20,48 @@ var wsUpgrader = websocket.Upgrader{
 	CheckOrigin: func(r *http.Request) bool { return true },
 }
 
-func runServe(portName string, baud int, args []string) error {
+type serveOpts struct {
+	portName string
+	baud     int
+	useBLE   bool
+	bleName  string
+	settle   time.Duration
+}
+
+func runServe(opts serveOpts, args []string) error {
 	serveFlags := flag.NewFlagSet("serve", flag.ExitOnError)
 	addr := serveFlags.String("addr", ":8080", "dashboard HTTP listen address")
 	apiAddr := serveFlags.String("api-addr", ":8081", "external API HTTP listen address (empty to disable)")
 	accelInterval := serveFlags.Duration("accel-interval", defaultAccelStreamInterval, "accel WebSocket sample period on API server")
-	interval := serveFlags.Duration("interval", 2*time.Second, "UART poll interval")
+	interval := serveFlags.Duration("interval", 2*time.Second, "host poll interval")
 	if err := serveFlags.Parse(args); err != nil {
 		return err
 	}
-	if portName == "" {
-		return fmt.Errorf("serve requires -port (master UART)")
+	if opts.useBLE && opts.portName != "" {
+		return fmt.Errorf("use either -port or -ble, not both")
 	}
 
-	link := newManagedSerial(portName, baud)
+	link := newManagedHost(opts.baud)
 	link.quiet = true
+	link.settle = opts.settle
+	if opts.settle <= 0 {
+		link.settle = time.Second
+	}
+
+	switch {
+	case opts.portName != "":
+		if err := link.ConnectUART(opts.portName, opts.baud); err != nil {
+			log.Printf("initial UART connect failed (UI can retry): %v", err)
+		}
+	case opts.useBLE:
+		name := opts.bleName
+		if name == "" {
+			name = bleDefaultName
+		}
+		if err := link.ConnectBLE("", name); err != nil {
+			log.Printf("initial BLE connect failed (UI can scan/retry): %v", err)
+		}
+	}
 
 	hub := newWSHub()
 	streamCtl := newAccelStreamCtl()
@@ -48,16 +75,17 @@ func runServe(portName string, baud int, args []string) error {
 		shutdownHTTPServer(dashSrv)
 		shutdownAPIServer(apiSrv)
 		if err := link.Close(); err != nil {
-			log.Printf("UART close: %v", err)
+			log.Printf("host close: %v", err)
 		}
 	})
 
-	go runPoller(link, portName, hub, streamCtl, tapCtl, *interval, stop)
+	go runPoller(link, link.Endpoint(), hub, streamCtl, tapCtl, *interval, stop)
 	go runBatteryPoller(link, hub, 5*time.Second, stop)
 	go runCacheStatusDashboardPoller(link, hub, *accelInterval, stop)
+	go runBLEStreamDashboardPoller(link, hub, streamCtl, stop)
 
 	if *apiAddr != "" {
-		apiSrv = runAPIServer(portName, link, *apiAddr, *accelInterval, hub, streamCtl, tapCtl, stop)
+		apiSrv = runAPIServer(link.Endpoint(), link, *apiAddr, *accelInterval, hub, streamCtl, tapCtl, stop)
 	}
 
 	mux := http.NewServeMux()
@@ -85,10 +113,12 @@ func runServe(portName string, baud int, args []string) error {
 	}
 	mux.Handle("/", http.FileServer(http.FS(ui)))
 
-	log.Printf("dashboard http://localhost%s  (UART %s @ %d baud, poll %s, live-stream %s, auto-reconnect)",
-		*addr, portName, baud, interval.String(), accelInterval.String())
+	log.Printf("dashboard http://localhost%s  (transport=%s endpoint=%q poll %s, live-stream %s)",
+		*addr, link.Transport(), link.Endpoint(), interval.String(), accelInterval.String())
 	if *apiAddr == "" {
 		log.Printf("external API disabled (-api-addr \"\")")
+	} else {
+		log.Printf("external API http://localhost%s  ws://localhost%s/ws", *apiAddr, *apiAddr)
 	}
 
 	dashSrv = &http.Server{Addr: *addr, Handler: mux}

goTool/dashboard.go

@@ -66,22 +66,91 @@ type ClientView struct {
 }
 
 type DashboardState struct {
-	UpdatedAt     string `json:"updated_at"`
-	SerialPort    string `json:"serial_port"`
+	UpdatedAt string `json:"updated_at"`
+	SerialPort string `json:"serial_port"`
+	/** Alias of host_endpoint for older UI. */
+	HostEndpoint  string `json:"host_endpoint"`
+	HostTransport string `json:"host_transport"`
+	HostConnected bool   `json:"host_connected"`
 	UARTConnected bool   `json:"uart_connected"`
 	SerialOK      bool   `json:"serial_ok"`
 	SerialError   string `json:"serial_error,omitempty"`
 	/** Host: fast CACHE_STATUS poll (~16 ms) for accel + tap. */
 	LiveStream bool         `json:"live_stream"`
-	Master     MasterView   `json:"master"`
-	Clients    []ClientView `json:"clients"`
+	/** BLE live path: inter-tick stats from BleStreamTick.esp_timestamp_us. */
+	BleTick  *BleTickView `json:"ble_tick,omitempty"`
+	Master   MasterView   `json:"master"`
+	Clients  []ClientView `json:"clients"`
+}
+
+// BleTickView is median/mean inter-departure of BLE_STREAM_TICK (ESP timer).
+type BleTickView struct {
+	PeriodMs uint32  `json:"period_ms"`
+	MedianMs float64 `json:"median_ms"`
+	MeanMs   float64 `json:"mean_ms"`
+	MinMs    float64 `json:"min_ms"`
+	MaxMs    float64 `json:"max_ms"`
+	Samples  int     `json:"samples"`
+	LastEspUs uint64 `json:"last_esp_us,omitempty"`
+}
+
+const bleTickDeltaCap = 64
+
+type bleTickTracker struct {
+	lastEspUs uint64
+	haveLast  bool
+	periodMs  uint32
+	deltas    [bleTickDeltaCap]float64
+	next      int
+	count     int
+}
+
+func (t *bleTickTracker) reset() {
+	*t = bleTickTracker{}
+}
+
+func (t *bleTickTracker) add(espUs uint64, periodMs uint32) BleTickView {
+	if periodMs != 0 {
+		t.periodMs = periodMs
+	}
+	if t.haveLast && espUs > t.lastEspUs {
+		dt := float64(espUs-t.lastEspUs) / 1000.0
+		t.deltas[t.next] = dt
+		t.next = (t.next + 1) % bleTickDeltaCap
+		if t.count < bleTickDeltaCap {
+			t.count++
+		}
+	}
+	t.lastEspUs = espUs
+	t.haveLast = true
+
+	samples := make([]float64, 0, t.count)
+	if t.count < bleTickDeltaCap {
+		samples = append(samples, t.deltas[:t.count]...)
+	} else {
+		samples = append(samples, t.deltas[t.next:]...)
+		samples = append(samples, t.deltas[:t.next]...)
+	}
+	st := makeLatencyStats(samples)
+	return BleTickView{
+		PeriodMs:  t.periodMs,
+		MedianMs:  st.MedMs,
+		MeanMs:    st.MeanMs,
+		MinMs:     st.MinMs,
+		MaxMs:     st.MaxMs,
+		Samples:   st.N,
+		LastEspUs: espUs,
+	}
 }
 
 type wsHub struct {
 	mu         sync.RWMutex
+	writeMu    sync.Mutex // gorilla websocket: one writer at a time
 	clients    map[*websocket.Conn]struct{}
 	state      DashboardState
 	liveStream bool
+	bleTicks   bleTickTracker
+	lastPush   time.Time // throttle BLE tick WS pushes
 }
 
 func newWSHub() *wsHub {
@@ -92,6 +161,10 @@ func (h *wsHub) setState(st DashboardState) {
 	h.mu.Lock()
 	prev := h.state
 	st.LiveStream = prev.LiveStream
+	if st.BleTick == nil && prev.BleTick != nil && st.LiveStream {
+		cp := *prev.BleTick
+		st.BleTick = &cp
+	}
 	st.Clients = preserveClientAccel(st.Clients, prev.Clients, st.LiveStream)
 	st.Clients = preserveClientBattery(st.Clients, prev.Clients)
 	st.Clients = preserveClientTap(st.Clients, prev.Clients)
@@ -136,15 +209,25 @@ func (h *wsHub) unregister(c *websocket.Conn) {
 	h.mu.Unlock()
 }
 
-// writeJSON sends to one client; removes it on error or panic (closed connection).
+// dropClient removes the client and closes the socket so the browser reconnects.
+func (h *wsHub) dropClient(c *websocket.Conn) {
+	h.unregister(c)
+	_ = c.Close()
+}
+
+// writeJSON sends to one client; removes+closes it on error or panic.
 func (h *wsHub) writeJSON(c *websocket.Conn, data []byte) {
 	defer func() {
 		if recover() != nil {
-			h.unregister(c)
+			h.dropClient(c)
 		}
 	}()
-	if err := c.WriteMessage(websocket.TextMessage, data); err != nil {
-		h.unregister(c)
+	h.writeMu.Lock()
+	_ = c.SetWriteDeadline(time.Now().Add(2 * time.Second))
+	err := c.WriteMessage(websocket.TextMessage, data)
+	h.writeMu.Unlock()
+	if err != nil {
+		h.dropClient(c)
 	}
 }
 
@@ -413,6 +496,8 @@ func (h *wsHub) patchLiveStream(enabled bool) {
 	st := h.state
 	st.LiveStream = enabled
 	if !enabled {
+		h.bleTicks.reset()
+		st.BleTick = nil
 		for i := range st.Clients {
 			st.Clients[i].AccelValid = false
 			st.Clients[i].AccelX = 0
@@ -497,6 +582,49 @@ func (h *wsHub) mergeAccel(samples []*pb.AccelSample) {
 	}
 }
 
+// mergeBleStreamTick applies accel/tap from a BLE tick and updates inter-tick stats.
+// State is updated every tick; WebSocket push is throttled (~50 Hz) so concurrent
+// writers (poller/battery) cannot flood or race the gorilla conn.
+func (h *wsHub) mergeBleStreamTick(tick *pb.BleStreamTick) {
+	if tick == nil || !h.liveStreamEnabled() {
+		return
+	}
+	cache := &pb.CacheStatusResponse{Clients: tick.GetClients()}
+	const minPushGap = 20 * time.Millisecond
+
+	h.mu.Lock()
+	view := h.bleTicks.add(tick.GetEspTimestampUs(), tick.GetPeriodMs())
+	st := h.state
+	st.Clients = applyAccelSamples(st.Clients, accelSamplesFromCacheStatus(cache))
+	st.Clients = applyTapEvents(st.Clients, tapEventsFromCacheStatus(cache))
+	st.BleTick = &view
+	st.UpdatedAt = time.Now().Format(time.RFC3339)
+	h.state = st
+	push := time.Since(h.lastPush) >= minPushGap
+	if push {
+		h.lastPush = time.Now()
+	}
+	var conns []*websocket.Conn
+	if push {
+		conns = make([]*websocket.Conn, 0, len(h.clients))
+		for c := range h.clients {
+			conns = append(conns, c)
+		}
+	}
+	h.mu.Unlock()
+
+	if !push {
+		return
+	}
+	data, err := json.Marshal(st)
+	if err != nil {
+		return
+	}
+	for _, c := range conns {
+		h.writeJSON(c, data)
+	}
+}
+
 func (h *wsHub) mergeTap(events []*pb.TapEvent) {
 	if len(events) == 0 || !h.liveStreamEnabled() {
 		return
@@ -530,20 +658,35 @@ func (h *wsHub) broadcastRaw(v any) {
 }
 
 func pollDashboard(link *managedSerial, portName string, last *DashboardState, streamCtl *accelStreamCtl, tapCtl *tapNotifyCtl) DashboardState {
+	ep := link.Endpoint()
+	if ep == "" {
+		ep = portName
+	}
+	tr := link.Transport()
 	st := DashboardState{
-		UpdatedAt:  time.Now().Format(time.RFC3339),
-		SerialPort: portName,
-		Clients:    []ClientView{},
+		UpdatedAt:     time.Now().Format(time.RFC3339),
+		SerialPort:    ep,
+		HostEndpoint:  ep,
+		HostTransport: tr,
+		Clients:       []ClientView{},
+	}
+	if !link.IsConnected() && tr == hostTransportNone {
+		st.SerialError = "not connected — use UART or BLE connect"
+		return st
 	}
 
 	ver, err := link.getVersionPoll()
 	if errors.Is(err, errUARTBusy) {
-		return pausedPollState(portName, last)
+		return pausedPollState(ep, last)
 	}
 	if err != nil {
-		return disconnectedState(portName, err)
+		return disconnectedState(ep, err)
 	}
 	st.UARTConnected = true
+	st.HostConnected = true
+	st.HostTransport = link.Transport()
+	st.HostEndpoint = link.Endpoint()
+	st.SerialPort = st.HostEndpoint
 	st.SerialOK = true
 	st.Master = MasterView{
 		Version:          ver.GetVersion(),
@@ -565,7 +708,8 @@ func pollDashboard(link *managedSerial, portName string, last *DashboardState, s
 		}
 		st.SerialOK = false
 		st.SerialError = err.Error()
-		st.UARTConnected = link.IsConnected()
+		st.HostConnected = link.IsConnected()
+		st.UARTConnected = st.HostConnected
 		return st
 	}
 
@@ -653,7 +797,7 @@ func runBatteryPoller(link *managedSerial, hub *wsHub, interval time.Duration, s
 		case <-stop:
 			return
 		case <-ticker.C:
-			if !link.IsConnected() {
+			if !link.IsConnected() || link.PollPaused() {
 				continue
 			}
 			bat, err := link.BatteryStatusPoll(&pb.BatteryStatusRequest{AllClients: true})
@@ -674,7 +818,11 @@ func runCacheStatusDashboardPoller(link *managedSerial, hub *wsHub, interval tim
 		case <-stop:
 			return
 		case <-ticker.C:
-			if !hub.liveStreamEnabled() {
+			if !hub.liveStreamEnabled() || link.PollPaused() {
+				continue
+			}
+			// BLE live path prefers BLE_STREAM_TICK pushes.
+			if link.Transport() == hostTransportBLE {
 				continue
 			}
 			cache, err := link.readCacheStatusPoll()
@@ -687,6 +835,35 @@ func runCacheStatusDashboardPoller(link *managedSerial, hub *wsHub, interval tim
 	}
 }
 
+// runBLEStreamDashboardPoller feeds live accel/tap from BLE_STREAM_TICK when live_stream is on.
+func runBLEStreamDashboardPoller(link *managedSerial, hub *wsHub, streamCtl *accelStreamCtl, stop <-chan struct{}) {
+	_ = streamCtl
+	for {
+		select {
+		case <-stop:
+			return
+		default:
+		}
+		if link.Transport() != hostTransportBLE || !hub.liveStreamEnabled() || link.PollPaused() {
+			select {
+			case <-stop:
+				return
+			case <-time.After(50 * time.Millisecond):
+			}
+			continue
+		}
+		payload, err := link.NextStreamTick(200 * time.Millisecond)
+		if err != nil {
+			continue
+		}
+		tick, err := parseBleStreamTickPayload(payload)
+		if err != nil {
+			continue
+		}
+		hub.mergeBleStreamTick(tick)
+	}
+}
+
 func (h *wsHub) clientCount() int {
 	h.mu.RLock()
 	n := len(h.clients)
@@ -695,11 +872,14 @@ func (h *wsHub) clientCount() int {
 }
 
 func pausedPollState(portName string, last *DashboardState) DashboardState {
-	if last != nil && last.UARTConnected {
+	if last != nil && (last.HostConnected || last.UARTConnected) {
 		st := *last
 		st.UpdatedAt = time.Now().Format(time.RFC3339)
 		st.SerialPort = portName
+		st.HostEndpoint = portName
 		st.SerialOK = true
+		st.HostConnected = true
+		st.UARTConnected = true
 		st.SerialError = "Live-Polling pausiert (OTA läuft)"
 		return st
 	}
@@ -774,20 +954,20 @@ func runPoller(link *managedSerial, portName string, hub *wsHub, streamCtl *acce
 	ticker := time.NewTicker(interval)
 	defer ticker.Stop()
 
-	uartUp := false
+	hostUp := false
 	var lastGood DashboardState
 	publish := func() {
 		st := pollDashboard(link, portName, &lastGood, streamCtl, tapCtl)
 		hub.setState(st)
-		if st.UARTConnected && st.SerialOK {
+		if st.HostConnected && st.SerialOK {
 			hub.mu.RLock()
 			lastGood = hub.state
 			hub.mu.RUnlock()
 		}
-		if st.UARTConnected && !uartUp {
-			log.Printf("UART %s connected", portName)
+		if st.HostConnected && !hostUp {
+			log.Printf("host %s connected (%s)", st.HostEndpoint, st.HostTransport)
 		}
-		uartUp = st.UARTConnected
+		hostUp = st.HostConnected
 	}
 
 	publish()

goTool/docs/API_REST.md

@@ -1,6 +1,6 @@
 # REST API
 
-`go run . -port /dev/ttyUSB0 serve` starts two HTTP servers on the same UART link:
+`go run . serve` (optional `-port` / `-ble`) starts two HTTP servers on the same `managedHost` (UART or BLE):
 
 | Base URL | Flag | Used by |
 |----------|------|---------|
@@ -27,6 +27,9 @@ GET /api/v1/
   "name": "powerpod-external-api",
   "version": "1",
   "serial_port": "/dev/ttyUSB0",
+  "transport": "uart",
+  "endpoint": "/dev/ttyUSB0",
+  "connected": true,
   "websocket": "/ws",
   "default_interval_ms": 16,
   "min_interval_ms": 1,
@@ -110,7 +113,48 @@ WebSocket: `set_led_ring` with the same fields plus `"type":"set_led_ring"` →
 
 Used by the web UI; safe for scripts that drive the same features.
 
-### Live stream (host `CACHE_STATUS` poll ~16 ms)
+### Host link (UART / BLE)
+
+```http
+GET /api/host
+→ {"transport":"none|uart|ble","endpoint":"…","connected":false,"ble_name":""}
+
+GET /api/serial/ports
+→ {"ports":["/dev/ttyUSB0",…]}
+
+POST /api/host/connect
+Content-Type: application/json
+{"transport":"uart","port":"/dev/ttyUSB0"}
+{"transport":"ble","address":"AA:BB:…","name":"Powerpod"}
+
+POST /api/host/disconnect
+
+POST /api/ble/scan
+{"timeout_s":5,"name_filter":"Powerpod"}
+→ {"devices":[{"address":"…","name":"Powerpod","rssi":-55}]}
+```
+
+`name_filter` is optional substring match (case-insensitive); omit to list all LE advertisements. Active BLE is disconnected before scan (BlueZ adapter).
+
+Dashboard WebSocket state includes `host_connected`, `host_transport`, `host_endpoint` (aliases `uart_connected` / `serial_port` kept).
+
+**OTA** (`POST /api/ota`) returns **400** unless `transport==uart` and connected.
+
+### BLE latency tests (BLE host only)
+
+```http
+POST /api/ble-rtt
+{"count":50,"warmup":5,"settle_s":0}
+→ {"success":true,"count":50,"warmup":5,"stats":{"n":50,"min_ms":…,"median_ms":…,"mean_ms":…,"max_ms":…}}
+
+POST /api/ble-stream
+{"count":50,"period_ms":16,"tol_ms":2,"timeout_s":15,"client_id":0}
+→ {"success":true,"received":50,"requested":50,"window_ok":true,"dt_esp_ms":{…},"dr_pc_ms":{…},…}
+```
+
+Pauses dashboard/API polling while running. Requires active BLE host (`DIP8=1`).
+
+### Live stream (host `CACHE_STATUS` poll ~16 ms; BLE uses `BLE_STREAM_TICK`)
 
 ```http
 GET /api/live-stream

goTool/docs/API_WEBSOCKET.md

@@ -2,15 +2,16 @@
 
 External API: `ws://localhost:8081/ws` (default `-api-addr`, disable with empty string).
 
-Start with `go run . -port /dev/ttyUSB0 serve`.
+Start with `go run . serve` (optional `-port` / `-ble` to pre-connect). Host can be opened later via `host_connect` / dashboard REST.
 
 ---
 
 ## Connection flow
 
-1. Connect → server sends `hello` (push off; defaults and command list).
-2. Send JSON commands → one reply per message (`*_status` or `client_list`).
-3. After `set_stream` with `enable: true`, server may push `input` messages without a prior command.
+1. Connect → server sends `hello` (host status, push off; defaults and command list).
+2. Optionally `ble_scan` / `list_serial_ports` then `host_connect` if not already linked.
+3. Send JSON commands → one reply per message (`*_status`, `client_list`, `ble_scan_result`, …).
+4. After `set_stream` with `enable: true`, server may push `input` messages without a prior command.
 
 Commands and pushes share one socket — always branch on `type`.
 
@@ -27,7 +28,9 @@ On disconnect, `set_stream` state for that socket is dropped. Firmware settings
 | This connection    | `set_stream`                         | Whether you receive push JSON on this socket                       |
 
 
-UART polling runs only when at least one connection has `receive_input: true` **and** at least one slave streams input or has tap notify enabled. `set_tap_notify` alone does not enable push — you still need `set_stream`.
+Host polling / BLE ticks run only when at least one connection has `receive_input: true` **and** at least one slave streams input or has tap notify enabled. `set_tap_notify` alone does not enable push — you still need `set_stream`.
+
+On **BLE**, live `input` prefers firmware `BLE_STREAM_TICK` pushes; otherwise falls back to `CACHE_STATUS` like UART.
 
 ### Push timing (per connection)
 
@@ -38,7 +41,7 @@ UART polling runs only when at least one connection has `receive_input: true` **
 | `pre_fetch`   | `set_stream`, `stream_status`          | Ms before each push when the host starts the UART cache read |
 
 
-Global UART poll interval = minimum `interval_ms` among all connections with push enabled.
+Global host poll interval = minimum `interval_ms` among all connections with push enabled.
 
 Typical sequence:
 
@@ -115,10 +118,14 @@ One JSON object per message; field `type` selects the command.
 {
   "type": "hello",
   "serial_port": "/dev/ttyUSB0",
+  "transport": "uart",
+  "endpoint": "/dev/ttyUSB0",
+  "connected": true,
   "interval_ms": 16,
   "pre_fetch_ms": 2,
   "tap_display_min_ms": 2000,
   "commands": [
+    "get_host", "list_serial_ports", "ble_scan", "host_connect", "host_disconnect",
     "list_clients",
     "set_stream", "get_stream",
     "set_input_stream", "get_input_stream",
@@ -128,6 +135,23 @@ One JSON object per message; field `type` selects the command.
 }
 ```
 
+### Host link
+
+| Client `type` | Reply `type` | Notes |
+|---------------|--------------|--------|
+| `get_host` | `host_status` | `transport`, `endpoint`, `connected` |
+| `list_serial_ports` | `serial_ports` | `{ports:[…]}` |
+| `ble_scan` | `ble_scan_result` | optional `timeout_s`, `name_filter`; disconnects active BLE first |
+| `host_connect` | `host_status` | `transport:"uart","port"` or `transport:"ble","address","name?"` |
+| `host_disconnect` | `host_status` | |
+
+```json
+{"type":"host_connect","transport":"ble","address":"AA:BB:CC:DD:EE:FF","name":"Powerpod"}
+{"type":"host_status","transport":"ble","endpoint":"AA:BB:…","connected":true,"success":true}
+```
+
+If the host is not connected, other commands that need the master return their usual error in the status reply.
+
 ### `list_clients`
 
 Request: `{"type":"list_clients"}`

goTool/go.mod

@@ -6,9 +6,19 @@ require (
 	github.com/gorilla/websocket v1.5.3
 	go.bug.st/serial v1.6.4
 	google.golang.org/protobuf v1.36.11
+	tinygo.org/x/bluetooth v0.13.0
 )
 
 require (
 	github.com/creack/goselect v0.1.2 // indirect
+	github.com/go-ole/go-ole v1.2.6 // indirect
+	github.com/godbus/dbus/v5 v5.1.0 // indirect
+	github.com/saltosystems/winrt-go v0.0.0-20240509164145-4f7860a3bd2b // indirect
+	github.com/sirupsen/logrus v1.9.3 // indirect
+	github.com/soypat/cyw43439 v0.0.0-20250505012923-830110c8f4af // indirect
+	github.com/soypat/seqs v0.0.0-20250124201400-0d65bc7c1710 // indirect
+	github.com/tinygo-org/cbgo v0.0.4 // indirect
+	github.com/tinygo-org/pio v0.2.0 // indirect
+	golang.org/x/exp v0.0.0-20241204233417-43b7b7cde48d // indirect
 	golang.org/x/sys v0.19.0 // indirect
 )

goTool/go.sum

@@ -1,20 +1,51 @@
 github.com/creack/goselect v0.1.2 h1:2DNy14+JPjRBgPzAd1thbQp4BSIihxcBf0IXhQXDRa0=
 github.com/creack/goselect v0.1.2/go.mod h1:a/NhLweNvqIYMuxcMOuWY516Cimucms3DglDzQP3hKY=
+github.com/davecgh/go-spew v1.1.0/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
 github.com/davecgh/go-spew v1.1.1 h1:vj9j/u1bqnvCEfJOwUhtlOARqs3+rkHYY13jYWTU97c=
 github.com/davecgh/go-spew v1.1.1/go.mod h1:J7Y8YcW2NihsgmVo/mv3lAwl/skON4iLHjSsI+c5H38=
+github.com/go-ole/go-ole v1.2.6 h1:/Fpf6oFPoeFik9ty7siob0G6Ke8QvQEuVcuChpwXzpY=
+github.com/go-ole/go-ole v1.2.6/go.mod h1:pprOEPIfldk/42T2oK7lQ4v4JSDwmV0As9GaiUsvbm0=
+github.com/godbus/dbus/v5 v5.1.0 h1:4KLkAxT3aOY8Li4FRJe/KvhoNFFxo0m6fNuFUO8QJUk=
+github.com/godbus/dbus/v5 v5.1.0/go.mod h1:xhWf0FNVPg57R7Z0UbKHbJfkEywrmjJnf7w5xrFpKfA=
 github.com/google/go-cmp v0.7.0 h1:wk8382ETsv4JYUZwIsn6YpYiWiBsYLSJiTsyBybVuN8=
 github.com/google/go-cmp v0.7.0/go.mod h1:pXiqmnSA92OHEEa9HXL2W4E7lf9JzCmGVUdgjX3N/iU=
 github.com/gorilla/websocket v1.5.3 h1:saDtZ6Pbx/0u+bgYQ3q96pZgCzfhKXGPqt7kZ72aNNg=
 github.com/gorilla/websocket v1.5.3/go.mod h1:YR8l580nyteQvAITg2hZ9XVh4b55+EU/adAjf1fMHhE=
+github.com/konsorten/go-windows-terminal-sequences v1.0.1/go.mod h1:T0+1ngSBFLxvqU3pZ+m/2kptfBszLMUkC4ZK/EgS/cQ=
 github.com/pmezard/go-difflib v1.0.0 h1:4DBwDE0NGyQoBHbLQYPwSUPoCMWR5BEzIk/f1lZbAQM=
 github.com/pmezard/go-difflib v1.0.0/go.mod h1:iKH77koFhYxTK1pcRnkKkqfTogsbg7gZNVY4sRDYZ/4=
+github.com/saltosystems/winrt-go v0.0.0-20240509164145-4f7860a3bd2b h1:du3zG5fd8snsFN6RBoLA7fpaYV9ZQIsyH9snlk2Zvik=
+github.com/saltosystems/winrt-go v0.0.0-20240509164145-4f7860a3bd2b/go.mod h1:CIltaIm7qaANUIvzr0Vmz71lmQMAIbGJ7cvgzX7FMfA=
+github.com/sirupsen/logrus v1.5.0/go.mod h1:+F7Ogzej0PZc/94MaYx/nvG9jOFMD2osvC3s+Squfpo=
+github.com/sirupsen/logrus v1.9.3 h1:dueUQJ1C2q9oE3F7wvmSGAaVtTmUizReu6fjN8uqzbQ=
+github.com/sirupsen/logrus v1.9.3/go.mod h1:naHLuLoDiP4jHNo9R0sCBMtWGeIprob74mVsIT4qYEQ=
+github.com/soypat/cyw43439 v0.0.0-20250505012923-830110c8f4af h1:ZfFq94aH/BCSWWKd9RPUgdHOdgGKCnfl2VdvU9UksTA=
+github.com/soypat/cyw43439 v0.0.0-20250505012923-830110c8f4af/go.mod h1:MUaGO5m6X7xrkHrPDmnaxCEcuCCFN/0ZFh9oie+exbU=
+github.com/soypat/seqs v0.0.0-20250124201400-0d65bc7c1710 h1:Y9fBuiR/urFY/m76+SAZTxk2xAOS2n85f+H1CugajeA=
+github.com/soypat/seqs v0.0.0-20250124201400-0d65bc7c1710/go.mod h1:oCVCNGCHMKoBj97Zp9znLbQ1nHxpkmOY9X+UAGzOxc8=
+github.com/stretchr/objx v0.1.0/go.mod h1:HFkY916IF+rwdDfMAkV7OtwuqBVzrE8GR6GFx+wExME=
+github.com/stretchr/testify v1.2.2/go.mod h1:a8OnRcib4nhh0OaRAV+Yts87kKdq0PP7pXfy6kDkUVs=
+github.com/stretchr/testify v1.7.0/go.mod h1:6Fq8oRcR53rry900zMqJjRRixrwX3KX962/h/Wwjteg=
 github.com/stretchr/testify v1.8.4 h1:CcVxjf3Q8PM0mHUKJCdn+eZZtm5yQwehR5yeSVQQcUk=
 github.com/stretchr/testify v1.8.4/go.mod h1:sz/lmYIOXD/1dqDmKjjqLyZ2RngseejIcXlSw2iwfAo=
+github.com/tinygo-org/cbgo v0.0.4 h1:3D76CRYbH03Rudi8sEgs/YO0x3JIMdyq8jlQtk/44fU=
+github.com/tinygo-org/cbgo v0.0.4/go.mod h1:7+HgWIHd4nbAz0ESjGlJ1/v9LDU1Ox8MGzP9mah/fLk=
+github.com/tinygo-org/pio v0.2.0 h1:vo3xa6xDZ2rVtxrks/KcTZHF3qq4lyWOntvEvl2pOhU=
+github.com/tinygo-org/pio v0.2.0/go.mod h1:LU7Dw00NJ+N86QkeTGjMLNkYcEYMor6wTDpTCu0EaH8=
 go.bug.st/serial v1.6.4 h1:7FmqNPgVp3pu2Jz5PoPtbZ9jJO5gnEnZIvnI1lzve8A=
 go.bug.st/serial v1.6.4/go.mod h1:nofMJxTeNVny/m6+KaafC6vJGj3miwQZ6vW4BZUGJPI=
+golang.org/x/exp v0.0.0-20241204233417-43b7b7cde48d h1:0olWaB5pg3+oychR51GUVCEsGkeCU/2JxjBgIo4f3M0=
+golang.org/x/exp v0.0.0-20241204233417-43b7b7cde48d/go.mod h1:qj5a5QZpwLU2NLQudwIN5koi3beDhSAlJwa67PuM98c=
+golang.org/x/sys v0.0.0-20190422165155-953cdadca894/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
+golang.org/x/sys v0.0.0-20190916202348-b4ddaad3f8a3/go.mod h1:h1NjWce9XRLGQEsW7wpKNCjG9DtNlClVuFLEZdDNbEs=
+golang.org/x/sys v0.0.0-20220715151400-c0bba94af5f8/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
 golang.org/x/sys v0.19.0 h1:q5f1RH2jigJ1MoAWp2KTp3gm5zAGFUTarQZ5U386+4o=
 golang.org/x/sys v0.19.0/go.mod h1:/VUhepiaJMQUp4+oa/7Zr1D23ma6VTLIYjOOTFZPUcA=
 google.golang.org/protobuf v1.36.11 h1:fV6ZwhNocDyBLK0dj+fg8ektcVegBBuEolpbTQyBNVE=
 google.golang.org/protobuf v1.36.11/go.mod h1:HTf+CrKn2C3g5S8VImy6tdcUvCska2kB7j23XfzDpco=
+gopkg.in/check.v1 v0.0.0-20161208181325-20d25e280405/go.mod h1:Co6ibVJAznAaIkqp8huTwlJQCZ016jof/cbN4VW5Yz0=
+gopkg.in/yaml.v3 v3.0.0-20200313102051-9f266ea9e77c/go.mod h1:K4uyk7z7BCEPqu6E+C64Yfv1cQ7kz7rIZviUmN+EgEM=
 gopkg.in/yaml.v3 v3.0.1 h1:fxVm/GzAzEWqLHuvctI91KS9hhNmmWOoWu0XTYJS7CA=
 gopkg.in/yaml.v3 v3.0.1/go.mod h1:K4uyk7z7BCEPqu6E+C64Yfv1cQ7kz7rIZviUmN+EgEM=
+tinygo.org/x/bluetooth v0.13.0 h1:3pkTMcfqv71HoAxG4DBTm2n+1bm6Nqqz8eoHjSW9+5g=
+tinygo.org/x/bluetooth v0.13.0/go.mod h1:YnyJRVX09i+wkFeHpXut0b+qHq+T2WwKBRRiF/scANA=

goTool/host_conn.go

@@ -0,0 +1,239 @@
+package main
+
+import (
+	"fmt"
+	"time"
+
+	pb "powerpod/gotool/pb"
+	"google.golang.org/protobuf/proto"
+)
+
+// hostConn is the UART or BLE host transport used by CLI commands.
+type hostConn interface {
+	exchangePayload(payload []byte, cmdName string) ([]byte, error)
+	exchange(cmdID byte, cmdName string) ([]byte, error)
+	Close() error
+}
+
+// optional stream source (BLE only)
+type hostStreamConn interface {
+	hostConn
+	// NextStreamTick waits for a BLE_STREAM_TICK payload (type byte + protobuf).
+	NextStreamTick(timeout time.Duration) ([]byte, error)
+}
+
+func hostGetVersion(h hostConn) (*pb.VersionResponse, error) {
+	payload, err := h.exchange(byte(pb.MessageType_VERSION), "VERSION")
+	if err != nil {
+		return nil, err
+	}
+	return decodeVersionPayload(payload)
+}
+
+func hostListClients(h hostConn) ([]*pb.ClientInfo, error) {
+	payload, err := h.exchange(byte(pb.MessageType_CLIENT_INFO), "CLIENT_INFO")
+	if err != nil {
+		return nil, err
+	}
+	return decodeClientsPayload(payload)
+}
+
+func hostReadCacheStatus(h hostConn) (*pb.CacheStatusResponse, error) {
+	payload, err := h.exchange(byte(pb.MessageType_CACHE_STATUS), "CACHE_STATUS")
+	if err != nil {
+		return nil, err
+	}
+	return decodeCacheStatusPayload(payload)
+}
+
+func hostAccelStream(h hostConn, req *pb.AccelStreamRequest) (*pb.AccelStreamResponse, error) {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_ACCEL_STREAM,
+		Payload: &pb.UartMessage_AccelStreamRequest{
+			AccelStreamRequest: req,
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_ACCEL_STREAM)}, body...)
+	respPayload, err := h.exchangePayload(payload, "ACCEL_STREAM")
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetAccelStreamResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing accel_stream_response")
+	}
+	return r, nil
+}
+
+func hostFindMe(h hostConn, clientID uint32) error {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_FIND_ME,
+		Payload: &pb.UartMessage_EspnowFindMeRequest{
+			EspnowFindMeRequest: &pb.EspNowFindMeRequest{ClientId: clientID},
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_FIND_ME)}, body...)
+	respPayload, err := h.exchangePayload(payload, "FIND_ME")
+	if err != nil {
+		return err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetEspnowFindMeResponse()
+	if r == nil {
+		return fmt.Errorf("missing espnow_find_me_response")
+	}
+	if !r.GetSuccess() {
+		return fmt.Errorf("find-me rejected (client_id=%d)", r.GetClientId())
+	}
+	return nil
+}
+
+func hostRestart(h hostConn, clientID uint32) error {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_RESTART,
+		Payload: &pb.UartMessage_RestartRequest{
+			RestartRequest: &pb.RestartRequest{ClientId: clientID},
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_RESTART)}, body...)
+	respPayload, err := h.exchangePayload(payload, "RESTART")
+	if err != nil {
+		return err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetRestartResponse()
+	if r == nil {
+		return fmt.Errorf("missing restart_response")
+	}
+	if !r.GetSuccess() {
+		return fmt.Errorf("restart rejected (client_id=%d)", r.GetClientId())
+	}
+	return nil
+}
+
+func hostSetLogLevel(h hostConn, write bool, level uint32) (*pb.SetLogLevelResponse, error) {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_SET_LOG_LEVEL,
+		Payload: &pb.UartMessage_SetLogLevelRequest{
+			SetLogLevelRequest: &pb.SetLogLevelRequest{Write: write, Level: level},
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_SET_LOG_LEVEL)}, body...)
+	respPayload, err := h.exchangePayload(payload, "SET_LOG_LEVEL")
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetSetLogLevelResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing set_log_level_response")
+	}
+	return r, nil
+}
+
+func hostLedRing(h hostConn, req *pb.LedRingProgressRequest) (*pb.LedRingProgressResponse, error) {
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_LED_RING,
+		Payload: &pb.UartMessage_LedRingProgressRequest{
+			LedRingProgressRequest: req,
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_LED_RING)}, body...)
+	respPayload, err := h.exchangePayload(payload, "LED_RING")
+	if err != nil {
+		return nil, err
+	}
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetLedRingProgressResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing led_ring_progress_response")
+	}
+	return r, nil
+}
+
+func hostEchoPing(h hostConn, clientID uint32) (*EchoPingResult, error) {
+	t0 := time.Now()
+	timestampUs := uint64(t0.UnixMicro())
+	req := &pb.EspNowEchoPingRequest{
+		ClientId:    clientID,
+		TimestampUs: timestampUs,
+	}
+	msg := &pb.UartMessage{
+		Type: pb.MessageType_ESPNOW_ECHO_PING,
+		Payload: &pb.UartMessage_EspnowEchoPingRequest{
+			EspnowEchoPingRequest: req,
+		},
+	}
+	body, err := proto.Marshal(msg)
+	if err != nil {
+		return nil, fmt.Errorf("encode: %w", err)
+	}
+	payload := append([]byte{byte(pb.MessageType_ESPNOW_ECHO_PING)}, body...)
+	respPayload, err := h.exchangePayload(payload, "ESPNOW_ECHO_PING")
+	if err != nil {
+		return nil, err
+	}
+	rttMs := float64(time.Since(t0).Microseconds()) / 1000.0
+
+	var respMsg pb.UartMessage
+	if err := proto.Unmarshal(respPayload[1:], &respMsg); err != nil {
+		return nil, fmt.Errorf("decode: %w", err)
+	}
+	r := respMsg.GetEspnowEchoPingResponse()
+	if r == nil {
+		return nil, fmt.Errorf("missing espnow_echo_ping_response")
+	}
+	if !r.GetSuccess() {
+		return &EchoPingResult{
+			Success:  false,
+			ClientID: r.GetClientId(),
+			RttMs:    rttMs,
+		}, nil
+	}
+	if r.GetTimestampUs() != timestampUs {
+		return nil, fmt.Errorf("timestamp mismatch: sent %d got %d", timestampUs, r.GetTimestampUs())
+	}
+	return &EchoPingResult{
+		Success:     true,
+		ClientID:    r.GetClientId(),
+		TimestampUs: r.GetTimestampUs(),
+		RttMs:       rttMs,
+		EspRttUs:    r.GetEspRttUs(),
+	}, nil
+}

goTool/host_managed.go

@@ -0,0 +1,491 @@
+package main
+
+import (
+	"fmt"
+	"log"
+	"strings"
+	"sync"
+	"time"
+
+	"go.bug.st/serial"
+	"tinygo.org/x/bluetooth"
+)
+
+const (
+	hostTransportNone = "none"
+	hostTransportUART = "uart"
+	hostTransportBLE  = "ble"
+)
+
+// errHostBusy is returned when the link is held for OTA (UART only).
+var errHostBusy = errUARTBusy
+
+// managedHost is a reconnecting UART or BLE host link for serve/CLI.
+type managedHost struct {
+	quiet  bool
+	baud   int
+	settle time.Duration
+
+	mu          sync.Mutex
+	transport   string // none|uart|ble
+	endpoint    string // port path or BLE address string
+	bleName     string // last connected BLE local name (optional)
+	sp          *serialPort
+	ble         *bleLink
+	otaActive   bool
+	pausePoll   bool // true while BLE latency tests run (pollers yield)
+	uartPort    string // remembered UART port for reconnect
+}
+
+func newManagedHost(baud int) *managedHost {
+	if baud <= 0 {
+		baud = defaultBaud
+	}
+	return &managedHost{
+		baud:      baud,
+		transport: hostTransportNone,
+		settle:    time.Second,
+	}
+}
+
+// newManagedSerial keeps the old constructor name for call sites during migrate.
+func newManagedSerial(portName string, baud int) *managedHost {
+	m := newManagedHost(baud)
+	if portName != "" {
+		m.uartPort = portName
+		m.endpoint = portName
+		m.transport = hostTransportUART
+	}
+	return m
+}
+
+func (m *managedHost) Transport() string {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	if m.transport == "" {
+		return hostTransportNone
+	}
+	return m.transport
+}
+
+func (m *managedHost) Endpoint() string {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	return m.endpoint
+}
+
+func (m *managedHost) Close() error {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	return m.disconnectLocked()
+}
+
+func (m *managedHost) IsConnected() bool {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	switch m.transport {
+	case hostTransportUART:
+		return m.sp != nil
+	case hostTransportBLE:
+		return m.ble != nil
+	default:
+		return false
+	}
+}
+
+func (m *managedHost) disconnectLocked() error {
+	var err error
+	if m.sp != nil {
+		err = m.sp.port.Close()
+		m.sp = nil
+	}
+	if m.ble != nil {
+		e := m.ble.Close()
+		if err == nil {
+			err = e
+		}
+		m.ble = nil
+	}
+	m.transport = hostTransportNone
+	return err
+}
+
+func (m *managedHost) Disconnect() error {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	ep := m.endpoint
+	err := m.disconnectLocked()
+	if !m.quiet && ep != "" {
+		log.Printf("host disconnected (%s)", ep)
+	}
+	return err
+}
+
+func (m *managedHost) ConnectUART(port string, baud int) error {
+	if port == "" {
+		return fmt.Errorf("UART port required")
+	}
+	if baud <= 0 {
+		baud = m.baud
+	}
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	if m.otaActive {
+		return errHostBusy
+	}
+	_ = m.disconnectLocked()
+	m.baud = baud
+	m.uartPort = port
+	m.endpoint = port
+	m.transport = hostTransportUART
+	if err := m.openUARTLocked(); err != nil {
+		m.transport = hostTransportNone
+		m.endpoint = ""
+		return err
+	}
+	return nil
+}
+
+func (m *managedHost) ConnectBLE(address string, name string) error {
+	if address == "" && name == "" {
+		return fmt.Errorf("BLE address or name required")
+	}
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	if m.otaActive {
+		return errHostBusy
+	}
+	_ = m.disconnectLocked()
+
+	var link *bleLink
+	var err error
+	settle := m.settle
+	m.mu.Unlock()
+	if address != "" {
+		link, err = openBLEAddress(address, settle)
+	} else {
+		link, err = openBLE(name, settle)
+	}
+	m.mu.Lock()
+	if err != nil {
+		return err
+	}
+	link.quiet = m.quiet
+	m.ble = link
+	m.transport = hostTransportBLE
+	if address != "" {
+		m.endpoint = address
+	} else {
+		m.endpoint = name
+	}
+	m.bleName = name
+	if !m.quiet {
+		log.Printf("BLE host connected (%s)", m.endpoint)
+	}
+	return nil
+}
+
+func (m *managedHost) openUARTLocked() error {
+	sp, err := openSerial(m.uartPort, m.baud)
+	if err != nil {
+		return err
+	}
+	sp.quiet = m.quiet
+	m.sp = sp
+	if !m.quiet {
+		log.Printf("UART %s connected (%d baud)", m.uartPort, m.baud)
+	}
+	return nil
+}
+
+func (m *managedHost) openLocked() error {
+	return m.openUARTLocked()
+}
+
+func (m *managedHost) closeLocked() error {
+	return m.disconnectLocked()
+}
+
+func (m *managedHost) invalidateLocked(reason error) {
+	if m.sp == nil && m.ble == nil {
+		return
+	}
+	if !m.quiet {
+		log.Printf("host %s disconnected: %v", m.endpoint, reason)
+	}
+	_ = m.disconnectLocked()
+	// remember transport intent for UART reconnect
+	if m.uartPort != "" && m.transport == hostTransportNone {
+		// after invalidate, leave as none; poller will try Connect again via open
+		m.transport = hostTransportUART
+		m.endpoint = m.uartPort
+	}
+}
+
+func (m *managedHost) withPort(fn func(*serialPort) error) error {
+	return m.withPortLocked(false, fn)
+}
+
+func (m *managedHost) withPortPoll(fn func(*serialPort) error) error {
+	return m.withPortLocked(true, fn)
+}
+
+func (m *managedHost) withPortLocked(poll bool, fn func(*serialPort) error) error {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	if m.otaActive {
+		return errHostBusy
+	}
+	if m.transport == hostTransportBLE {
+		return fmt.Errorf("operation requires UART host (DIP8=0)")
+	}
+	if m.transport != hostTransportUART && m.uartPort == "" {
+		return fmt.Errorf("not connected")
+	}
+	if m.transport == hostTransportNone && m.uartPort != "" {
+		m.transport = hostTransportUART
+		m.endpoint = m.uartPort
+	}
+	if m.sp == nil {
+		if err := m.openUARTLocked(); err != nil {
+			return fmt.Errorf("%s: %w", m.uartPort, err)
+		}
+	}
+	err := fn(m.sp)
+	if err != nil {
+		m.invalidateLocked(err)
+	}
+	return err
+}
+
+func (m *managedHost) recoverAfterMasterRestart() {
+	const bootWait = 6 * time.Second
+	m.mu.Lock()
+	tr := m.transport
+	m.disconnectLocked()
+	if tr == hostTransportUART {
+		m.transport = hostTransportUART
+		m.endpoint = m.uartPort
+	}
+	m.mu.Unlock()
+
+	log.Printf("host: master restart — waiting %s for boot", bootWait)
+	time.Sleep(bootWait)
+
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	if m.transport == hostTransportUART {
+		if err := m.openUARTLocked(); err != nil {
+			log.Printf("UART reconnect after master restart: %v", err)
+			return
+		}
+		flushSerialInput(m.sp)
+		log.Printf("UART %s ready after master restart", m.uartPort)
+	}
+}
+
+func (m *managedHost) exchangePayload(payload []byte, cmdName string) ([]byte, error) {
+	return m.exchangePayloadMode(false, payload, cmdName, readTimeout)
+}
+
+func (m *managedHost) exchangePayloadPoll(payload []byte, cmdName string) ([]byte, error) {
+	return m.exchangePayloadMode(true, payload, cmdName, readTimeout)
+}
+
+func (m *managedHost) beginPausePoll() bool {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	if m.otaActive || m.pausePoll {
+		return false
+	}
+	m.pausePoll = true
+	return true
+}
+
+func (m *managedHost) endPausePoll() {
+	m.mu.Lock()
+	m.pausePoll = false
+	m.mu.Unlock()
+}
+
+func (m *managedHost) PollPaused() bool {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	return m.pausePoll || m.otaActive
+}
+
+func (m *managedHost) exchangePayloadMode(poll bool, payload []byte, cmdName string, timeout time.Duration) ([]byte, error) {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	if m.otaActive || (poll && m.pausePoll) {
+		return nil, errHostBusy
+	}
+	switch m.transport {
+	case hostTransportBLE:
+		if m.ble == nil {
+			return nil, fmt.Errorf("BLE not connected")
+		}
+		resp, err := m.ble.exchangePayloadTimeout(payload, cmdName, timeout)
+		if err != nil {
+			m.invalidateLocked(err)
+		}
+		return resp, err
+	case hostTransportUART, hostTransportNone:
+		if m.uartPort == "" && m.sp == nil {
+			return nil, fmt.Errorf("not connected")
+		}
+		if m.transport == hostTransportNone {
+			m.transport = hostTransportUART
+			m.endpoint = m.uartPort
+		}
+		if m.sp == nil {
+			if err := m.openUARTLocked(); err != nil {
+				return nil, fmt.Errorf("%s: %w", m.uartPort, err)
+			}
+		}
+		resp, err := m.sp.exchangePayloadLocked(payload, cmdName, timeout)
+		if err != nil {
+			m.invalidateLocked(err)
+		}
+		return resp, err
+	default:
+		return nil, fmt.Errorf("not connected")
+	}
+}
+
+func (m *managedHost) exchange(cmdID byte, cmdName string) ([]byte, error) {
+	return m.exchangePayload([]byte{cmdID}, cmdName)
+}
+
+func (m *managedHost) exchangePoll(cmdID byte, cmdName string) ([]byte, error) {
+	return m.exchangePayloadPoll([]byte{cmdID}, cmdName)
+}
+
+func (m *managedHost) exchangePayloadVia(
+	portFn func(func(*serialPort) error) error,
+	payload []byte, cmdName string,
+) ([]byte, error) {
+	// Prefer transport-aware path (works for BLE too).
+	_ = portFn
+	return m.exchangePayload(payload, cmdName)
+}
+
+func (m *managedHost) exchangeVia(
+	portFn func(func(*serialPort) error) error,
+	cmdID byte, cmdName string,
+) ([]byte, error) {
+	_ = portFn
+	return m.exchange(cmdID, cmdName)
+}
+
+func (m *managedHost) NextStreamTick(timeout time.Duration) ([]byte, error) {
+	m.mu.Lock()
+	ble := m.ble
+	tr := m.transport
+	m.mu.Unlock()
+	if tr != hostTransportBLE || ble == nil {
+		return nil, fmt.Errorf("BLE stream ticks require BLE host")
+	}
+	return ble.NextStreamTick(timeout)
+}
+
+func (m *managedHost) HostStatus() map[string]any {
+	m.mu.Lock()
+	defer m.mu.Unlock()
+	connected := false
+	switch m.transport {
+	case hostTransportUART:
+		connected = m.sp != nil
+	case hostTransportBLE:
+		connected = m.ble != nil
+	}
+	return map[string]any{
+		"transport": m.transportOrNone(),
+		"endpoint":  m.endpoint,
+		"connected": connected,
+		"ble_name":  m.bleName,
+	}
+}
+
+func (m *managedHost) transportOrNone() string {
+	if m.transport == "" {
+		return hostTransportNone
+	}
+	return m.transport
+}
+
+func listSerialPorts() ([]string, error) {
+	ports, err := serial.GetPortsList()
+	if err != nil {
+		return nil, err
+	}
+	if ports == nil {
+		return []string{}, nil
+	}
+	return ports, nil
+}
+
+type bleScanDevice struct {
+	Address string `json:"address"`
+	Name    string `json:"name"`
+	RSSI    int    `json:"rssi"`
+}
+
+func scanBLEDevices(timeout time.Duration, nameFilter string) ([]bleScanDevice, error) {
+	if timeout <= 0 {
+		timeout = 5 * time.Second
+	}
+	adapter := bluetooth.DefaultAdapter
+	if err := adapter.Enable(); err != nil {
+		return nil, fmt.Errorf("enable bluetooth: %w", err)
+	}
+
+	seen := map[string]bleScanDevice{}
+	var mu sync.Mutex
+	go func() {
+		time.Sleep(timeout)
+		_ = adapter.StopScan()
+	}()
+	filter := strings.TrimSpace(nameFilter)
+	_ = adapter.Scan(func(a *bluetooth.Adapter, result bluetooth.ScanResult) {
+		name := result.LocalName()
+		if filter != "" && !strings.Contains(strings.ToLower(name), strings.ToLower(filter)) {
+			return
+		}
+		addr := result.Address.String()
+		mu.Lock()
+		seen[addr] = bleScanDevice{
+			Address: addr,
+			Name:    name,
+			RSSI:    int(result.RSSI),
+		}
+		mu.Unlock()
+	})
+	// StopScan ends Scan; ignore error and return whatever was found.
+	mu.Lock()
+	defer mu.Unlock()
+	out := make([]bleScanDevice, 0, len(seen))
+	for _, d := range seen {
+		out = append(out, d)
+	}
+	return out, nil
+}
+
+func disconnectedState(portName string, err error) DashboardState {
+	msg := "host disconnected"
+	if err != nil {
+		msg = err.Error()
+	}
+	return DashboardState{
+		UpdatedAt:     time.Now().Format(time.RFC3339),
+		SerialPort:    portName,
+		HostEndpoint:  portName,
+		UARTConnected: false,
+		HostConnected: false,
+		HostTransport: hostTransportNone,
+		SerialOK:      false,
+		SerialError:   msg,
+		Master:        MasterView{OK: false, Error: msg},
+		Clients:       []ClientView{},
+	}
+}

goTool/main.go

@@ -5,12 +5,14 @@ import (
 	"fmt"
 	"log"
 	"os"
+	"time"
 )
 
 const defaultBaud = 921600
 
 func usage() {
-	fmt.Fprintf(os.Stderr, "usage: gotool [-port /dev/ttyUSB0] <command>\n")
+	fmt.Fprintf(os.Stderr, "usage: gotool [-port /dev/ttyUSB0 | -ble] <command>\n")
+	fmt.Fprintf(os.Stderr, "  DIP8 on master: 0=UART (-port), 1=BLE (-ble); reboot after DIP change\n")
 	fmt.Fprintf(os.Stderr, "  test uses uart.master from bench config when -port is omitted\n\n")
 	fmt.Fprintf(os.Stderr, "commands:\n")
 	fmt.Fprintf(os.Stderr, "  version   firmware version and git hash\n")
@@ -18,12 +20,15 @@ func usage() {
 	fmt.Fprintf(os.Stderr, "  deadzone      get/set accelerometer deadzone (LSB)\n")
 	fmt.Fprintf(os.Stderr, "  tap-config    get/set BMA456 tap detection parameters\n")
 	fmt.Fprintf(os.Stderr, "  tap-notify    get/set which tap kinds notify via ESP-NOW\n")
-	fmt.Fprintf(os.Stderr, "  cache-status  subscribed accel + tap cache (one UART round-trip)\n")
+	fmt.Fprintf(os.Stderr, "  cache-status  subscribed accel + tap cache (one round-trip)\n")
+	fmt.Fprintf(os.Stderr, "  accel-stream  enable/disable ESP-NOW accel stream (+ BLE period)\n")
 	fmt.Fprintf(os.Stderr, "  unicast-test  send ESP-NOW unicast test to one slave\n")
 	fmt.Fprintf(os.Stderr, "  echo-ping     ESP-NOW timestamp echo round-trip to one slave\n")
+	fmt.Fprintf(os.Stderr, "  ble-rtt       Host↔Master RTT via VERSION (N samples)\n")
+	fmt.Fprintf(os.Stderr, "  ble-stream    enable stream + measure BleStreamTick window\n")
 	fmt.Fprintf(os.Stderr, "  test          run automated scenario (see testdata/)\n")
-	fmt.Fprintf(os.Stderr, "  serve         web dashboard (Bootstrap + WebSocket)\n")
-	fmt.Fprintf(os.Stderr, "  ota           UART OTA upload (A/B partitions)\n")
+	fmt.Fprintf(os.Stderr, "  serve         web dashboard (optional -port / -ble; connect from UI)\n")
+	fmt.Fprintf(os.Stderr, "  ota           UART OTA upload (A/B partitions; UART host only)\n")
 	fmt.Fprintf(os.Stderr, "  ota-progress  query per-slave ESP-NOW OTA progress on master\n")
 	fmt.Fprintf(os.Stderr, "  led-ring      set LED ring progress bar (0–100%%, rgb, intensity)\n")
 	fmt.Fprintf(os.Stderr, "  find-me       blink LED ring red/green/blue (3× each, full brightness)\n")
@@ -33,8 +38,11 @@ func usage() {
 }
 
 func main() {
-	portName := flag.String("port", "", "serial port (e.g. /dev/ttyUSB0)")
+	portName := flag.String("port", "", "serial port (e.g. /dev/ttyUSB0); XOR with -ble")
 	baud := flag.Int("baud", defaultBaud, "UART baud rate")
+	useBLE := flag.Bool("ble", false, "use BLE host transport (DIP8=1); XOR with -port")
+	bleName := flag.String("ble-name", bleDefaultName, "BLE advertised name")
+	bleSettle := flag.Float64("ble-settle", 1.0, "seconds to settle after BLE connect")
 	flag.Parse()
 
 	if flag.NArg() < 1 {
@@ -47,55 +55,134 @@ func main() {
 	var runErr error
 	switch cmd {
 	case "test", "autotest":
+		if *useBLE {
+			runErr = fmt.Errorf("autotest requires -port (UART)")
+			break
+		}
 		runErr = runTest(*portName, *baud, flag.Args()[1:])
 	case "serve", "web", "dashboard":
-		if *portName == "" {
-			fmt.Fprintf(os.Stderr, "command %q requires -port\n\n", cmd)
+		if *useBLE && *portName != "" {
+			fmt.Fprintf(os.Stderr, "use either -port or -ble, not both\n")
+			os.Exit(2)
+		}
+		runErr = runServe(serveOpts{
+			portName: *portName,
+			baud:     *baud,
+			useBLE:   *useBLE,
+			bleName:  *bleName,
+			settle:   time.Duration(*bleSettle * float64(time.Second)),
+		}, flag.Args()[1:])
+	case "version", "clients", "client-info", "deadzone", "accel-deadzone", "tap-config", "tap_config", "tap-notify", "tap_notify", "cache-status", "cache_status", "accel-stream", "accel_stream", "unicast-test", "unicast_test", "echo-ping", "echo_ping", "ble-rtt", "ble_rtt", "ble-stream", "ble_stream", "led-ring", "led_ring", "find-me", "find_me", "restart", "log-level", "log_level", "ota", "ota-progress", "ota_progress":
+		if *useBLE && *portName != "" {
+			fmt.Fprintf(os.Stderr, "use either -port or -ble, not both\n")
+			os.Exit(2)
+		}
+		if !*useBLE && *portName == "" {
+			fmt.Fprintf(os.Stderr, "command %q requires -port or -ble\n\n", cmd)
 			usage()
 			os.Exit(2)
 		}
-		runErr = runServe(*portName, *baud, flag.Args()[1:])
-	case "version", "clients", "client-info", "deadzone", "accel-deadzone", "tap-config", "tap_config", "tap-notify", "tap_notify", "cache-status", "cache_status", "unicast-test", "unicast_test", "echo-ping", "echo_ping", "led-ring", "led_ring", "find-me", "find_me", "restart", "log-level", "log_level", "ota", "ota-progress", "ota_progress":
-		if *portName == "" {
-			fmt.Fprintf(os.Stderr, "command %q requires -port\n\n", cmd)
-			usage()
-			os.Exit(2)
+		if cmd == "ota" || cmd == "ota-progress" || cmd == "ota_progress" {
+			if *useBLE {
+				fmt.Fprintf(os.Stderr, "OTA requires UART host (DIP8=0, -port)\n")
+				os.Exit(2)
+			}
 		}
-		sp, err := openSerial(*portName, *baud)
-		if err != nil {
-			log.Fatalf("open serial: %v", err)
+
+		var h hostConn
+		if *useBLE {
+			bl, err := openBLE(*bleName, time.Duration(*bleSettle*float64(time.Second)))
+			if err != nil {
+				log.Fatalf("open BLE: %v", err)
+			}
+			h = bl
+		} else {
+			sp, err := openSerial(*portName, *baud)
+			if err != nil {
+				log.Fatalf("open serial: %v", err)
+			}
+			h = sp
 		}
-		registerShutdown(func() { _ = sp.Close() })
+		registerShutdown(func() { _ = h.Close() })
 		enableShutdownOnInterrupt()
-		defer sp.Close()
+		defer h.Close()
+
 		switch cmd {
 		case "version":
-			runErr = runVersion(sp)
+			runErr = runVersionHost(h)
 		case "clients", "client-info":
-			runErr = runClients(sp)
+			runErr = runClientsHost(h)
+		case "cache-status", "cache_status":
+			runErr = runCacheStatusHost(h)
+		case "accel-stream", "accel_stream":
+			runErr = runAccelStreamCmd(h, flag.Args()[1:])
+		case "echo-ping", "echo_ping":
+			runErr = runEchoPingHost(h, flag.Args()[1:])
+		case "ble-rtt", "ble_rtt":
+			runErr = runBleRtt(h, flag.Args()[1:])
+		case "ble-stream", "ble_stream":
+			runErr = runBleStream(h, flag.Args()[1:])
 		case "deadzone", "accel-deadzone":
+			sp, ok := h.(*serialPort)
+			if !ok {
+				runErr = fmt.Errorf("%s over BLE not wired yet; use -port", cmd)
+				break
+			}
 			runErr = runDeadzone(sp, flag.Args()[1:])
 		case "tap-config", "tap_config":
+			sp, ok := h.(*serialPort)
+			if !ok {
+				runErr = fmt.Errorf("%s over BLE not wired yet; use -port", cmd)
+				break
+			}
 			runErr = runTapConfig(sp, flag.Args()[1:])
 		case "tap-notify", "tap_notify":
+			sp, ok := h.(*serialPort)
+			if !ok {
+				runErr = fmt.Errorf("%s over BLE not wired yet; use -port", cmd)
+				break
+			}
 			runErr = runTapNotify(sp, flag.Args()[1:])
-		case "cache-status", "cache_status":
-			runErr = runCacheStatus(sp)
 		case "unicast-test", "unicast_test":
+			sp, ok := h.(*serialPort)
+			if !ok {
+				runErr = fmt.Errorf("%s over BLE not wired yet; use -port", cmd)
+				break
+			}
 			runErr = runUnicastTest(sp, flag.Args()[1:])
-		case "echo-ping", "echo_ping":
-			runErr = runEchoPing(sp, flag.Args()[1:])
 		case "led-ring", "led_ring":
+			sp, ok := h.(*serialPort)
+			if !ok {
+				runErr = fmt.Errorf("%s over BLE not wired yet; use -port", cmd)
+				break
+			}
 			runErr = runLedRing(sp, flag.Args()[1:])
 		case "find-me", "find_me":
+			sp, ok := h.(*serialPort)
+			if !ok {
+				runErr = fmt.Errorf("%s over BLE not wired yet; use -port", cmd)
+				break
+			}
 			runErr = runFindMe(sp, flag.Args()[1:])
 		case "restart":
+			sp, ok := h.(*serialPort)
+			if !ok {
+				runErr = fmt.Errorf("%s over BLE not wired yet; use -port", cmd)
+				break
+			}
 			runErr = runRestart(sp, flag.Args()[1:])
 		case "log-level", "log_level":
+			sp, ok := h.(*serialPort)
+			if !ok {
+				runErr = fmt.Errorf("%s over BLE not wired yet; use -port", cmd)
+				break
+			}
 			runErr = runLogLevel(sp, flag.Args()[1:])
 		case "ota":
+			sp := h.(*serialPort)
 			runErr = runOTA(sp, flag.Args()[1:])
 		case "ota-progress", "ota_progress":
+			sp := h.(*serialPort)
 			runErr = runOtaProgress(sp, flag.Args()[1:])
 		}
 	default:
@@ -108,3 +195,76 @@ func main() {
 		log.Fatal(runErr)
 	}
 }
+
+func runVersionHost(h hostConn) error {
+	ver, err := hostGetVersion(h)
+	if err != nil {
+		return err
+	}
+	fmt.Printf("version:  %d\n", ver.GetVersion())
+	fmt.Printf("git_hash: %s\n", ver.GetGitHash())
+	return nil
+}
+
+func runClientsHost(h hostConn) error {
+	clients, err := hostListClients(h)
+	if err != nil {
+		return err
+	}
+	if len(clients) == 0 {
+		fmt.Println("no clients registered")
+		return nil
+	}
+	fmt.Printf("clients (%d):\n", len(clients))
+	for i, c := range clients {
+		fmt.Printf("  [%d] id=%d ver=%d available=%v used=%v\n",
+			i, c.GetId(), c.GetVersion(), c.GetAvailable(), c.GetUsed())
+	}
+	return nil
+}
+
+func runCacheStatusHost(h hostConn) error {
+	r, err := hostReadCacheStatus(h)
+	if err != nil {
+		return err
+	}
+	clients := r.GetClients()
+	if len(clients) == 0 {
+		fmt.Println("(no slaves with accel stream or tap notify enabled)")
+		return nil
+	}
+	for _, c := range clients {
+		id := c.GetClientId()
+		if a := c.GetAccel(); a != nil {
+			if !a.GetValid() {
+				fmt.Printf("client %d accel: no sample yet\n", id)
+			} else {
+				fmt.Printf("client %d accel: x=%d y=%d z=%d (age %d ms)\n",
+					id, a.GetX(), a.GetY(), a.GetZ(), a.GetAgeMs())
+			}
+		}
+		if t := c.GetTap(); t != nil {
+			fmt.Printf("client %d tap: %s (age %d ms)\n",
+				id, tapKindLabel(t.GetKind()), t.GetAgeMs())
+		}
+	}
+	return nil
+}
+
+func runEchoPingHost(h hostConn, args []string) error {
+	fs := flag.NewFlagSet("echo-ping", flag.ExitOnError)
+	clientID := fs.Uint("client", 0, "slave client id from `clients`")
+	if err := fs.Parse(args); err != nil {
+		return err
+	}
+	if *clientID == 0 {
+		return fmt.Errorf("client id required (see `gotool clients`)")
+	}
+	r, err := hostEchoPing(h, uint32(*clientID))
+	if err != nil {
+		return err
+	}
+	fmt.Printf("echo ping: success=%v client_id=%d rtt_ms=%.3f (host↔master↔slave) esp_rtt_us=%d (ESP-NOW only)\n",
+		r.Success, r.ClientID, r.RttMs, r.EspRttUs)
+	return nil
+}

goTool/pb/uart_messages.pb.go

@@ -52,6 +52,8 @@ const (
 	MessageType_SET_LOG_LEVEL MessageType = 31
 	// * Host → master: get/set BMA456H multitap detection parameters.
 	MessageType_TAP_CONFIG MessageType = 32
+	// * Master → host (BLE only): periodic pushed cache snapshot with ESP timestamp.
+	MessageType_BLE_STREAM_TICK MessageType = 33
 )
 
 // Enum value maps for MessageType.
@@ -81,6 +83,7 @@ var (
 		30: "ESPNOW_ECHO_PING",
 		31: "SET_LOG_LEVEL",
 		32: "TAP_CONFIG",
+		33: "BLE_STREAM_TICK",
 	}
 	MessageType_value = map[string]int32{
 		"UNKNOWN":             0,
@@ -107,6 +110,7 @@ var (
 		"ESPNOW_ECHO_PING":    30,
 		"SET_LOG_LEVEL":       31,
 		"TAP_CONFIG":          32,
+		"BLE_STREAM_TICK":     33,
 	}
 )
 
@@ -229,6 +233,7 @@ type UartMessage struct {
 	//	*UartMessage_SetLogLevelResponse
 	//	*UartMessage_TapConfigRequest
 	//	*UartMessage_TapConfigResponse
+	//	*UartMessage_BleStreamTick
 	Payload       isUartMessage_Payload `protobuf_oneof:"payload"`
 	unknownFields protoimpl.UnknownFields
 	sizeCache     protoimpl.SizeCache
@@ -593,6 +598,15 @@ func (x *UartMessage) GetTapConfigResponse() *TapConfigResponse {
 	return nil
 }
 
+func (x *UartMessage) GetBleStreamTick() *BleStreamTick {
+	if x != nil {
+		if x, ok := x.Payload.(*UartMessage_BleStreamTick); ok {
+			return x.BleStreamTick
+		}
+	}
+	return nil
+}
+
 type isUartMessage_Payload interface {
 	isUartMessage_Payload()
 }
@@ -737,6 +751,10 @@ type UartMessage_TapConfigResponse struct {
 	TapConfigResponse *TapConfigResponse `protobuf:"bytes,40,opt,name=tap_config_response,json=tapConfigResponse,proto3,oneof"`
 }
 
+type UartMessage_BleStreamTick struct {
+	BleStreamTick *BleStreamTick `protobuf:"bytes,41,opt,name=ble_stream_tick,json=bleStreamTick,proto3,oneof"`
+}
+
 func (*UartMessage_AckPayload) isUartMessage_Payload() {}
 
 func (*UartMessage_EchoPayload) isUartMessage_Payload() {}
@@ -807,6 +825,8 @@ func (*UartMessage_TapConfigRequest) isUartMessage_Payload() {}
 
 func (*UartMessage_TapConfigResponse) isUartMessage_Payload() {}
 
+func (*UartMessage_BleStreamTick) isUartMessage_Payload() {}
+
 type Ack struct {
 	state         protoimpl.MessageState `protogen:"open.v1"`
 	unknownFields protoimpl.UnknownFields
@@ -1371,12 +1391,14 @@ func (x *AccelDeadzoneResponse) GetSlavesUpdated() uint32 {
 
 // Host → master: enable/disable slave accel ESP-NOW stream (~16 ms per slave).
 // write=false: read; write=true: apply. client_id 0 invalid for write (use >0 or all_clients).
+// period_ms (8–16): BLE host push interval for BleStreamTick; ignored on UART (default 16).
 type AccelStreamRequest struct {
 	state         protoimpl.MessageState `protogen:"open.v1"`
 	Write         bool                   `protobuf:"varint,1,opt,name=write,proto3" json:"write,omitempty"`
 	Enable        bool                   `protobuf:"varint,2,opt,name=enable,proto3" json:"enable,omitempty"`
 	ClientId      uint32                 `protobuf:"varint,3,opt,name=client_id,json=clientId,proto3" json:"client_id,omitempty"`
 	AllClients    bool                   `protobuf:"varint,4,opt,name=all_clients,json=allClients,proto3" json:"all_clients,omitempty"`
+	PeriodMs      uint32                 `protobuf:"varint,5,opt,name=period_ms,json=periodMs,proto3" json:"period_ms,omitempty"`
 	unknownFields protoimpl.UnknownFields
 	sizeCache     protoimpl.SizeCache
 }
@@ -1439,6 +1461,13 @@ func (x *AccelStreamRequest) GetAllClients() bool {
 	return false
 }
 
+func (x *AccelStreamRequest) GetPeriodMs() uint32 {
+	if x != nil {
+		return x.PeriodMs
+	}
+	return 0
+}
+
 type AccelStreamResponse struct {
 	state         protoimpl.MessageState `protogen:"open.v1"`
 	Enabled       bool                   `protobuf:"varint,1,opt,name=enabled,proto3" json:"enabled,omitempty"`
@@ -2333,6 +2362,67 @@ func (x *CacheStatusResponse) GetClients() []*CacheClientStatus {
 	return nil
 }
 
+// * Master → host over BLE notify: aggregated cache + ESP timer timestamp.
+type BleStreamTick struct {
+	state          protoimpl.MessageState `protogen:"open.v1"`
+	EspTimestampUs uint64                 `protobuf:"varint,1,opt,name=esp_timestamp_us,json=espTimestampUs,proto3" json:"esp_timestamp_us,omitempty"`
+	PeriodMs       uint32                 `protobuf:"varint,2,opt,name=period_ms,json=periodMs,proto3" json:"period_ms,omitempty"`
+	Clients        []*CacheClientStatus   `protobuf:"bytes,3,rep,name=clients,proto3" json:"clients,omitempty"`
+	unknownFields  protoimpl.UnknownFields
+	sizeCache      protoimpl.SizeCache
+}
+
+func (x *BleStreamTick) Reset() {
+	*x = BleStreamTick{}
+	mi := &file_uart_messages_proto_msgTypes[25]
+	ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
+	ms.StoreMessageInfo(mi)
+}
+
+func (x *BleStreamTick) String() string {
+	return protoimpl.X.MessageStringOf(x)
+}
+
+func (*BleStreamTick) ProtoMessage() {}
+
+func (x *BleStreamTick) ProtoReflect() protoreflect.Message {
+	mi := &file_uart_messages_proto_msgTypes[25]
+	if x != nil {
+		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
+		if ms.LoadMessageInfo() == nil {
+			ms.StoreMessageInfo(mi)
+		}
+		return ms
+	}
+	return mi.MessageOf(x)
+}
+
+// Deprecated: Use BleStreamTick.ProtoReflect.Descriptor instead.
+func (*BleStreamTick) Descriptor() ([]byte, []int) {
+	return file_uart_messages_proto_rawDescGZIP(), []int{25}
+}
+
+func (x *BleStreamTick) GetEspTimestampUs() uint64 {
+	if x != nil {
+		return x.EspTimestampUs
+	}
+	return 0
+}
+
+func (x *BleStreamTick) GetPeriodMs() uint32 {
+	if x != nil {
+		return x.PeriodMs
+	}
+	return 0
+}
+
+func (x *BleStreamTick) GetClients() []*CacheClientStatus {
+	if x != nil {
+		return x.Clients
+	}
+	return nil
+}
+
 type EspNowUnicastTestRequest struct {
 	state         protoimpl.MessageState `protogen:"open.v1"`
 	ClientId      uint32                 `protobuf:"varint,1,opt,name=client_id,json=clientId,proto3" json:"client_id,omitempty"`
@@ -2343,7 +2433,7 @@ type EspNowUnicastTestRequest struct {
 
 func (x *EspNowUnicastTestRequest) Reset() {
 	*x = EspNowUnicastTestRequest{}
-	mi := &file_uart_messages_proto_msgTypes[25]
+	mi := &file_uart_messages_proto_msgTypes[26]
 	ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 	ms.StoreMessageInfo(mi)
 }
@@ -2355,7 +2445,7 @@ func (x *EspNowUnicastTestRequest) String() string {
 func (*EspNowUnicastTestRequest) ProtoMessage() {}
 
 func (x *EspNowUnicastTestRequest) ProtoReflect() protoreflect.Message {
-	mi := &file_uart_messages_proto_msgTypes[25]
+	mi := &file_uart_messages_proto_msgTypes[26]
 	if x != nil {
 		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 		if ms.LoadMessageInfo() == nil {
@@ -2368,7 +2458,7 @@ func (x *EspNowUnicastTestRequest) ProtoReflect() protoreflect.Message {
 
 // Deprecated: Use EspNowUnicastTestRequest.ProtoReflect.Descriptor instead.
 func (*EspNowUnicastTestRequest) Descriptor() ([]byte, []int) {
-	return file_uart_messages_proto_rawDescGZIP(), []int{25}
+	return file_uart_messages_proto_rawDescGZIP(), []int{26}
 }
 
 func (x *EspNowUnicastTestRequest) GetClientId() uint32 {
@@ -2395,7 +2485,7 @@ type EspNowUnicastTestResponse struct {
 
 func (x *EspNowUnicastTestResponse) Reset() {
 	*x = EspNowUnicastTestResponse{}
-	mi := &file_uart_messages_proto_msgTypes[26]
+	mi := &file_uart_messages_proto_msgTypes[27]
 	ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 	ms.StoreMessageInfo(mi)
 }
@@ -2407,7 +2497,7 @@ func (x *EspNowUnicastTestResponse) String() string {
 func (*EspNowUnicastTestResponse) ProtoMessage() {}
 
 func (x *EspNowUnicastTestResponse) ProtoReflect() protoreflect.Message {
-	mi := &file_uart_messages_proto_msgTypes[26]
+	mi := &file_uart_messages_proto_msgTypes[27]
 	if x != nil {
 		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 		if ms.LoadMessageInfo() == nil {
@@ -2420,7 +2510,7 @@ func (x *EspNowUnicastTestResponse) ProtoReflect() protoreflect.Message {
 
 // Deprecated: Use EspNowUnicastTestResponse.ProtoReflect.Descriptor instead.
 func (*EspNowUnicastTestResponse) Descriptor() ([]byte, []int) {
-	return file_uart_messages_proto_rawDescGZIP(), []int{26}
+	return file_uart_messages_proto_rawDescGZIP(), []int{27}
 }
 
 func (x *EspNowUnicastTestResponse) GetSuccess() bool {
@@ -2449,7 +2539,7 @@ type EspNowEchoPingRequest struct {
 
 func (x *EspNowEchoPingRequest) Reset() {
 	*x = EspNowEchoPingRequest{}
-	mi := &file_uart_messages_proto_msgTypes[27]
+	mi := &file_uart_messages_proto_msgTypes[28]
 	ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 	ms.StoreMessageInfo(mi)
 }
@@ -2461,7 +2551,7 @@ func (x *EspNowEchoPingRequest) String() string {
 func (*EspNowEchoPingRequest) ProtoMessage() {}
 
 func (x *EspNowEchoPingRequest) ProtoReflect() protoreflect.Message {
-	mi := &file_uart_messages_proto_msgTypes[27]
+	mi := &file_uart_messages_proto_msgTypes[28]
 	if x != nil {
 		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 		if ms.LoadMessageInfo() == nil {
@@ -2474,7 +2564,7 @@ func (x *EspNowEchoPingRequest) ProtoReflect() protoreflect.Message {
 
 // Deprecated: Use EspNowEchoPingRequest.ProtoReflect.Descriptor instead.
 func (*EspNowEchoPingRequest) Descriptor() ([]byte, []int) {
-	return file_uart_messages_proto_rawDescGZIP(), []int{27}
+	return file_uart_messages_proto_rawDescGZIP(), []int{28}
 }
 
 func (x *EspNowEchoPingRequest) GetClientId() uint32 {
@@ -2505,7 +2595,7 @@ type EspNowEchoPingResponse struct {
 
 func (x *EspNowEchoPingResponse) Reset() {
 	*x = EspNowEchoPingResponse{}
-	mi := &file_uart_messages_proto_msgTypes[28]
+	mi := &file_uart_messages_proto_msgTypes[29]
 	ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 	ms.StoreMessageInfo(mi)
 }
@@ -2517,7 +2607,7 @@ func (x *EspNowEchoPingResponse) String() string {
 func (*EspNowEchoPingResponse) ProtoMessage() {}
 
 func (x *EspNowEchoPingResponse) ProtoReflect() protoreflect.Message {
-	mi := &file_uart_messages_proto_msgTypes[28]
+	mi := &file_uart_messages_proto_msgTypes[29]
 	if x != nil {
 		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 		if ms.LoadMessageInfo() == nil {
@@ -2530,7 +2620,7 @@ func (x *EspNowEchoPingResponse) ProtoReflect() protoreflect.Message {
 
 // Deprecated: Use EspNowEchoPingResponse.ProtoReflect.Descriptor instead.
 func (*EspNowEchoPingResponse) Descriptor() ([]byte, []int) {
-	return file_uart_messages_proto_rawDescGZIP(), []int{28}
+	return file_uart_messages_proto_rawDescGZIP(), []int{29}
 }
 
 func (x *EspNowEchoPingResponse) GetSuccess() bool {
@@ -2591,7 +2681,7 @@ type LedRingProgressRequest struct {
 
 func (x *LedRingProgressRequest) Reset() {
 	*x = LedRingProgressRequest{}
-	mi := &file_uart_messages_proto_msgTypes[29]
+	mi := &file_uart_messages_proto_msgTypes[30]
 	ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 	ms.StoreMessageInfo(mi)
 }
@@ -2603,7 +2693,7 @@ func (x *LedRingProgressRequest) String() string {
 func (*LedRingProgressRequest) ProtoMessage() {}
 
 func (x *LedRingProgressRequest) ProtoReflect() protoreflect.Message {
-	mi := &file_uart_messages_proto_msgTypes[29]
+	mi := &file_uart_messages_proto_msgTypes[30]
 	if x != nil {
 		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 		if ms.LoadMessageInfo() == nil {
@@ -2616,7 +2706,7 @@ func (x *LedRingProgressRequest) ProtoReflect() protoreflect.Message {
 
 // Deprecated: Use LedRingProgressRequest.ProtoReflect.Descriptor instead.
 func (*LedRingProgressRequest) Descriptor() ([]byte, []int) {
-	return file_uart_messages_proto_rawDescGZIP(), []int{29}
+	return file_uart_messages_proto_rawDescGZIP(), []int{30}
 }
 
 func (x *LedRingProgressRequest) GetMode() uint32 {
@@ -2717,7 +2807,7 @@ type LedRingProgressResponse struct {
 
 func (x *LedRingProgressResponse) Reset() {
 	*x = LedRingProgressResponse{}
-	mi := &file_uart_messages_proto_msgTypes[30]
+	mi := &file_uart_messages_proto_msgTypes[31]
 	ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 	ms.StoreMessageInfo(mi)
 }
@@ -2729,7 +2819,7 @@ func (x *LedRingProgressResponse) String() string {
 func (*LedRingProgressResponse) ProtoMessage() {}
 
 func (x *LedRingProgressResponse) ProtoReflect() protoreflect.Message {
-	mi := &file_uart_messages_proto_msgTypes[30]
+	mi := &file_uart_messages_proto_msgTypes[31]
 	if x != nil {
 		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 		if ms.LoadMessageInfo() == nil {
@@ -2742,7 +2832,7 @@ func (x *LedRingProgressResponse) ProtoReflect() protoreflect.Message {
 
 // Deprecated: Use LedRingProgressResponse.ProtoReflect.Descriptor instead.
 func (*LedRingProgressResponse) Descriptor() ([]byte, []int) {
-	return file_uart_messages_proto_rawDescGZIP(), []int{30}
+	return file_uart_messages_proto_rawDescGZIP(), []int{31}
 }
 
 func (x *LedRingProgressResponse) GetSuccess() bool {
@@ -2797,7 +2887,7 @@ type EspNowFindMeRequest struct {
 
 func (x *EspNowFindMeRequest) Reset() {
 	*x = EspNowFindMeRequest{}
-	mi := &file_uart_messages_proto_msgTypes[31]
+	mi := &file_uart_messages_proto_msgTypes[32]
 	ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 	ms.StoreMessageInfo(mi)
 }
@@ -2809,7 +2899,7 @@ func (x *EspNowFindMeRequest) String() string {
 func (*EspNowFindMeRequest) ProtoMessage() {}
 
 func (x *EspNowFindMeRequest) ProtoReflect() protoreflect.Message {
-	mi := &file_uart_messages_proto_msgTypes[31]
+	mi := &file_uart_messages_proto_msgTypes[32]
 	if x != nil {
 		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 		if ms.LoadMessageInfo() == nil {
@@ -2822,7 +2912,7 @@ func (x *EspNowFindMeRequest) ProtoReflect() protoreflect.Message {
 
 // Deprecated: Use EspNowFindMeRequest.ProtoReflect.Descriptor instead.
 func (*EspNowFindMeRequest) Descriptor() ([]byte, []int) {
-	return file_uart_messages_proto_rawDescGZIP(), []int{31}
+	return file_uart_messages_proto_rawDescGZIP(), []int{32}
 }
 
 func (x *EspNowFindMeRequest) GetClientId() uint32 {
@@ -2842,7 +2932,7 @@ type EspNowFindMeResponse struct {
 
 func (x *EspNowFindMeResponse) Reset() {
 	*x = EspNowFindMeResponse{}
-	mi := &file_uart_messages_proto_msgTypes[32]
+	mi := &file_uart_messages_proto_msgTypes[33]
 	ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 	ms.StoreMessageInfo(mi)
 }
@@ -2854,7 +2944,7 @@ func (x *EspNowFindMeResponse) String() string {
 func (*EspNowFindMeResponse) ProtoMessage() {}
 
 func (x *EspNowFindMeResponse) ProtoReflect() protoreflect.Message {
-	mi := &file_uart_messages_proto_msgTypes[32]
+	mi := &file_uart_messages_proto_msgTypes[33]
 	if x != nil {
 		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 		if ms.LoadMessageInfo() == nil {
@@ -2867,7 +2957,7 @@ func (x *EspNowFindMeResponse) ProtoReflect() protoreflect.Message {
 
 // Deprecated: Use EspNowFindMeResponse.ProtoReflect.Descriptor instead.
 func (*EspNowFindMeResponse) Descriptor() ([]byte, []int) {
-	return file_uart_messages_proto_rawDescGZIP(), []int{32}
+	return file_uart_messages_proto_rawDescGZIP(), []int{33}
 }
 
 func (x *EspNowFindMeResponse) GetSuccess() bool {
@@ -2894,7 +2984,7 @@ type RestartRequest struct {
 
 func (x *RestartRequest) Reset() {
 	*x = RestartRequest{}
-	mi := &file_uart_messages_proto_msgTypes[33]
+	mi := &file_uart_messages_proto_msgTypes[34]
 	ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 	ms.StoreMessageInfo(mi)
 }
@@ -2906,7 +2996,7 @@ func (x *RestartRequest) String() string {
 func (*RestartRequest) ProtoMessage() {}
 
 func (x *RestartRequest) ProtoReflect() protoreflect.Message {
-	mi := &file_uart_messages_proto_msgTypes[33]
+	mi := &file_uart_messages_proto_msgTypes[34]
 	if x != nil {
 		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 		if ms.LoadMessageInfo() == nil {
@@ -2919,7 +3009,7 @@ func (x *RestartRequest) ProtoReflect() protoreflect.Message {
 
 // Deprecated: Use RestartRequest.ProtoReflect.Descriptor instead.
 func (*RestartRequest) Descriptor() ([]byte, []int) {
-	return file_uart_messages_proto_rawDescGZIP(), []int{33}
+	return file_uart_messages_proto_rawDescGZIP(), []int{34}
 }
 
 func (x *RestartRequest) GetClientId() uint32 {
@@ -2939,7 +3029,7 @@ type RestartResponse struct {
 
 func (x *RestartResponse) Reset() {
 	*x = RestartResponse{}
-	mi := &file_uart_messages_proto_msgTypes[34]
+	mi := &file_uart_messages_proto_msgTypes[35]
 	ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 	ms.StoreMessageInfo(mi)
 }
@@ -2951,7 +3041,7 @@ func (x *RestartResponse) String() string {
 func (*RestartResponse) ProtoMessage() {}
 
 func (x *RestartResponse) ProtoReflect() protoreflect.Message {
-	mi := &file_uart_messages_proto_msgTypes[34]
+	mi := &file_uart_messages_proto_msgTypes[35]
 	if x != nil {
 		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 		if ms.LoadMessageInfo() == nil {
@@ -2964,7 +3054,7 @@ func (x *RestartResponse) ProtoReflect() protoreflect.Message {
 
 // Deprecated: Use RestartResponse.ProtoReflect.Descriptor instead.
 func (*RestartResponse) Descriptor() ([]byte, []int) {
-	return file_uart_messages_proto_rawDescGZIP(), []int{34}
+	return file_uart_messages_proto_rawDescGZIP(), []int{35}
 }
 
 func (x *RestartResponse) GetSuccess() bool {
@@ -2993,7 +3083,7 @@ type SetLogLevelRequest struct {
 
 func (x *SetLogLevelRequest) Reset() {
 	*x = SetLogLevelRequest{}
-	mi := &file_uart_messages_proto_msgTypes[35]
+	mi := &file_uart_messages_proto_msgTypes[36]
 	ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 	ms.StoreMessageInfo(mi)
 }
@@ -3005,7 +3095,7 @@ func (x *SetLogLevelRequest) String() string {
 func (*SetLogLevelRequest) ProtoMessage() {}
 
 func (x *SetLogLevelRequest) ProtoReflect() protoreflect.Message {
-	mi := &file_uart_messages_proto_msgTypes[35]
+	mi := &file_uart_messages_proto_msgTypes[36]
 	if x != nil {
 		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 		if ms.LoadMessageInfo() == nil {
@@ -3018,7 +3108,7 @@ func (x *SetLogLevelRequest) ProtoReflect() protoreflect.Message {
 
 // Deprecated: Use SetLogLevelRequest.ProtoReflect.Descriptor instead.
 func (*SetLogLevelRequest) Descriptor() ([]byte, []int) {
-	return file_uart_messages_proto_rawDescGZIP(), []int{35}
+	return file_uart_messages_proto_rawDescGZIP(), []int{36}
 }
 
 func (x *SetLogLevelRequest) GetWrite() bool {
@@ -3045,7 +3135,7 @@ type SetLogLevelResponse struct {
 
 func (x *SetLogLevelResponse) Reset() {
 	*x = SetLogLevelResponse{}
-	mi := &file_uart_messages_proto_msgTypes[36]
+	mi := &file_uart_messages_proto_msgTypes[37]
 	ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 	ms.StoreMessageInfo(mi)
 }
@@ -3057,7 +3147,7 @@ func (x *SetLogLevelResponse) String() string {
 func (*SetLogLevelResponse) ProtoMessage() {}
 
 func (x *SetLogLevelResponse) ProtoReflect() protoreflect.Message {
-	mi := &file_uart_messages_proto_msgTypes[36]
+	mi := &file_uart_messages_proto_msgTypes[37]
 	if x != nil {
 		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 		if ms.LoadMessageInfo() == nil {
@@ -3070,7 +3160,7 @@ func (x *SetLogLevelResponse) ProtoReflect() protoreflect.Message {
 
 // Deprecated: Use SetLogLevelResponse.ProtoReflect.Descriptor instead.
 func (*SetLogLevelResponse) Descriptor() ([]byte, []int) {
-	return file_uart_messages_proto_rawDescGZIP(), []int{36}
+	return file_uart_messages_proto_rawDescGZIP(), []int{37}
 }
 
 func (x *SetLogLevelResponse) GetSuccess() bool {
@@ -3109,7 +3199,7 @@ type TapConfigRequest struct {
 
 func (x *TapConfigRequest) Reset() {
 	*x = TapConfigRequest{}
-	mi := &file_uart_messages_proto_msgTypes[37]
+	mi := &file_uart_messages_proto_msgTypes[38]
 	ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 	ms.StoreMessageInfo(mi)
 }
@@ -3121,7 +3211,7 @@ func (x *TapConfigRequest) String() string {
 func (*TapConfigRequest) ProtoMessage() {}
 
 func (x *TapConfigRequest) ProtoReflect() protoreflect.Message {
-	mi := &file_uart_messages_proto_msgTypes[37]
+	mi := &file_uart_messages_proto_msgTypes[38]
 	if x != nil {
 		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 		if ms.LoadMessageInfo() == nil {
@@ -3134,7 +3224,7 @@ func (x *TapConfigRequest) ProtoReflect() protoreflect.Message {
 
 // Deprecated: Use TapConfigRequest.ProtoReflect.Descriptor instead.
 func (*TapConfigRequest) Descriptor() ([]byte, []int) {
-	return file_uart_messages_proto_rawDescGZIP(), []int{37}
+	return file_uart_messages_proto_rawDescGZIP(), []int{38}
 }
 
 func (x *TapConfigRequest) GetWrite() bool {
@@ -3241,7 +3331,7 @@ type TapConfigResponse struct {
 
 func (x *TapConfigResponse) Reset() {
 	*x = TapConfigResponse{}
-	mi := &file_uart_messages_proto_msgTypes[38]
+	mi := &file_uart_messages_proto_msgTypes[39]
 	ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 	ms.StoreMessageInfo(mi)
 }
@@ -3253,7 +3343,7 @@ func (x *TapConfigResponse) String() string {
 func (*TapConfigResponse) ProtoMessage() {}
 
 func (x *TapConfigResponse) ProtoReflect() protoreflect.Message {
-	mi := &file_uart_messages_proto_msgTypes[38]
+	mi := &file_uart_messages_proto_msgTypes[39]
 	if x != nil {
 		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 		if ms.LoadMessageInfo() == nil {
@@ -3266,7 +3356,7 @@ func (x *TapConfigResponse) ProtoReflect() protoreflect.Message {
 
 // Deprecated: Use TapConfigResponse.ProtoReflect.Descriptor instead.
 func (*TapConfigResponse) Descriptor() ([]byte, []int) {
-	return file_uart_messages_proto_rawDescGZIP(), []int{38}
+	return file_uart_messages_proto_rawDescGZIP(), []int{39}
 }
 
 func (x *TapConfigResponse) GetClientId() uint32 {
@@ -3363,7 +3453,7 @@ type OtaStartPayload struct {
 
 func (x *OtaStartPayload) Reset() {
 	*x = OtaStartPayload{}
-	mi := &file_uart_messages_proto_msgTypes[39]
+	mi := &file_uart_messages_proto_msgTypes[40]
 	ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 	ms.StoreMessageInfo(mi)
 }
@@ -3375,7 +3465,7 @@ func (x *OtaStartPayload) String() string {
 func (*OtaStartPayload) ProtoMessage() {}
 
 func (x *OtaStartPayload) ProtoReflect() protoreflect.Message {
-	mi := &file_uart_messages_proto_msgTypes[39]
+	mi := &file_uart_messages_proto_msgTypes[40]
 	if x != nil {
 		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 		if ms.LoadMessageInfo() == nil {
@@ -3388,7 +3478,7 @@ func (x *OtaStartPayload) ProtoReflect() protoreflect.Message {
 
 // Deprecated: Use OtaStartPayload.ProtoReflect.Descriptor instead.
 func (*OtaStartPayload) Descriptor() ([]byte, []int) {
-	return file_uart_messages_proto_rawDescGZIP(), []int{39}
+	return file_uart_messages_proto_rawDescGZIP(), []int{40}
 }
 
 func (x *OtaStartPayload) GetTotalSize() uint32 {
@@ -3409,7 +3499,7 @@ type OtaPayload struct {
 
 func (x *OtaPayload) Reset() {
 	*x = OtaPayload{}
-	mi := &file_uart_messages_proto_msgTypes[40]
+	mi := &file_uart_messages_proto_msgTypes[41]
 	ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 	ms.StoreMessageInfo(mi)
 }
@@ -3421,7 +3511,7 @@ func (x *OtaPayload) String() string {
 func (*OtaPayload) ProtoMessage() {}
 
 func (x *OtaPayload) ProtoReflect() protoreflect.Message {
-	mi := &file_uart_messages_proto_msgTypes[40]
+	mi := &file_uart_messages_proto_msgTypes[41]
 	if x != nil {
 		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 		if ms.LoadMessageInfo() == nil {
@@ -3434,7 +3524,7 @@ func (x *OtaPayload) ProtoReflect() protoreflect.Message {
 
 // Deprecated: Use OtaPayload.ProtoReflect.Descriptor instead.
 func (*OtaPayload) Descriptor() ([]byte, []int) {
-	return file_uart_messages_proto_rawDescGZIP(), []int{40}
+	return file_uart_messages_proto_rawDescGZIP(), []int{41}
 }
 
 func (x *OtaPayload) GetSeq() uint32 {
@@ -3460,7 +3550,7 @@ type OtaEndPayload struct {
 
 func (x *OtaEndPayload) Reset() {
 	*x = OtaEndPayload{}
-	mi := &file_uart_messages_proto_msgTypes[41]
+	mi := &file_uart_messages_proto_msgTypes[42]
 	ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 	ms.StoreMessageInfo(mi)
 }
@@ -3472,7 +3562,7 @@ func (x *OtaEndPayload) String() string {
 func (*OtaEndPayload) ProtoMessage() {}
 
 func (x *OtaEndPayload) ProtoReflect() protoreflect.Message {
-	mi := &file_uart_messages_proto_msgTypes[41]
+	mi := &file_uart_messages_proto_msgTypes[42]
 	if x != nil {
 		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 		if ms.LoadMessageInfo() == nil {
@@ -3485,7 +3575,7 @@ func (x *OtaEndPayload) ProtoReflect() protoreflect.Message {
 
 // Deprecated: Use OtaEndPayload.ProtoReflect.Descriptor instead.
 func (*OtaEndPayload) Descriptor() ([]byte, []int) {
-	return file_uart_messages_proto_rawDescGZIP(), []int{41}
+	return file_uart_messages_proto_rawDescGZIP(), []int{42}
 }
 
 // Device → host status (also used as ACK after each 4 KiB written).
@@ -3502,7 +3592,7 @@ type OtaStatusPayload struct {
 
 func (x *OtaStatusPayload) Reset() {
 	*x = OtaStatusPayload{}
-	mi := &file_uart_messages_proto_msgTypes[42]
+	mi := &file_uart_messages_proto_msgTypes[43]
 	ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 	ms.StoreMessageInfo(mi)
 }
@@ -3514,7 +3604,7 @@ func (x *OtaStatusPayload) String() string {
 func (*OtaStatusPayload) ProtoMessage() {}
 
 func (x *OtaStatusPayload) ProtoReflect() protoreflect.Message {
-	mi := &file_uart_messages_proto_msgTypes[42]
+	mi := &file_uart_messages_proto_msgTypes[43]
 	if x != nil {
 		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 		if ms.LoadMessageInfo() == nil {
@@ -3527,7 +3617,7 @@ func (x *OtaStatusPayload) ProtoReflect() protoreflect.Message {
 
 // Deprecated: Use OtaStatusPayload.ProtoReflect.Descriptor instead.
 func (*OtaStatusPayload) Descriptor() ([]byte, []int) {
-	return file_uart_messages_proto_rawDescGZIP(), []int{42}
+	return file_uart_messages_proto_rawDescGZIP(), []int{43}
 }
 
 func (x *OtaStatusPayload) GetStatus() uint32 {
@@ -3568,7 +3658,7 @@ type OtaSlaveProgressRequest struct {
 
 func (x *OtaSlaveProgressRequest) Reset() {
 	*x = OtaSlaveProgressRequest{}
-	mi := &file_uart_messages_proto_msgTypes[43]
+	mi := &file_uart_messages_proto_msgTypes[44]
 	ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 	ms.StoreMessageInfo(mi)
 }
@@ -3580,7 +3670,7 @@ func (x *OtaSlaveProgressRequest) String() string {
 func (*OtaSlaveProgressRequest) ProtoMessage() {}
 
 func (x *OtaSlaveProgressRequest) ProtoReflect() protoreflect.Message {
-	mi := &file_uart_messages_proto_msgTypes[43]
+	mi := &file_uart_messages_proto_msgTypes[44]
 	if x != nil {
 		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 		if ms.LoadMessageInfo() == nil {
@@ -3593,7 +3683,7 @@ func (x *OtaSlaveProgressRequest) ProtoReflect() protoreflect.Message {
 
 // Deprecated: Use OtaSlaveProgressRequest.ProtoReflect.Descriptor instead.
 func (*OtaSlaveProgressRequest) Descriptor() ([]byte, []int) {
-	return file_uart_messages_proto_rawDescGZIP(), []int{43}
+	return file_uart_messages_proto_rawDescGZIP(), []int{44}
 }
 
 func (x *OtaSlaveProgressRequest) GetClientId() uint32 {
@@ -3617,7 +3707,7 @@ type OtaSlaveProgressEntry struct {
 
 func (x *OtaSlaveProgressEntry) Reset() {
 	*x = OtaSlaveProgressEntry{}
-	mi := &file_uart_messages_proto_msgTypes[44]
+	mi := &file_uart_messages_proto_msgTypes[45]
 	ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 	ms.StoreMessageInfo(mi)
 }
@@ -3629,7 +3719,7 @@ func (x *OtaSlaveProgressEntry) String() string {
 func (*OtaSlaveProgressEntry) ProtoMessage() {}
 
 func (x *OtaSlaveProgressEntry) ProtoReflect() protoreflect.Message {
-	mi := &file_uart_messages_proto_msgTypes[44]
+	mi := &file_uart_messages_proto_msgTypes[45]
 	if x != nil {
 		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 		if ms.LoadMessageInfo() == nil {
@@ -3642,7 +3732,7 @@ func (x *OtaSlaveProgressEntry) ProtoReflect() protoreflect.Message {
 
 // Deprecated: Use OtaSlaveProgressEntry.ProtoReflect.Descriptor instead.
 func (*OtaSlaveProgressEntry) Descriptor() ([]byte, []int) {
-	return file_uart_messages_proto_rawDescGZIP(), []int{44}
+	return file_uart_messages_proto_rawDescGZIP(), []int{45}
 }
 
 func (x *OtaSlaveProgressEntry) GetClientId() uint32 {
@@ -3693,7 +3783,7 @@ type OtaSlaveProgressResponse struct {
 
 func (x *OtaSlaveProgressResponse) Reset() {
 	*x = OtaSlaveProgressResponse{}
-	mi := &file_uart_messages_proto_msgTypes[45]
+	mi := &file_uart_messages_proto_msgTypes[46]
 	ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 	ms.StoreMessageInfo(mi)
 }
@@ -3705,7 +3795,7 @@ func (x *OtaSlaveProgressResponse) String() string {
 func (*OtaSlaveProgressResponse) ProtoMessage() {}
 
 func (x *OtaSlaveProgressResponse) ProtoReflect() protoreflect.Message {
-	mi := &file_uart_messages_proto_msgTypes[45]
+	mi := &file_uart_messages_proto_msgTypes[46]
 	if x != nil {
 		ms := protoimpl.X.MessageStateOf(protoimpl.Pointer(x))
 		if ms.LoadMessageInfo() == nil {
@@ -3718,7 +3808,7 @@ func (x *OtaSlaveProgressResponse) ProtoReflect() protoreflect.Message {
 
 // Deprecated: Use OtaSlaveProgressResponse.ProtoReflect.Descriptor instead.
 func (*OtaSlaveProgressResponse) Descriptor() ([]byte, []int) {
-	return file_uart_messages_proto_rawDescGZIP(), []int{45}
+	return file_uart_messages_proto_rawDescGZIP(), []int{46}
 }
 
 func (x *OtaSlaveProgressResponse) GetActive() bool {
@@ -3760,7 +3850,7 @@ var File_uart_messages_proto protoreflect.FileDescriptor
 
 const file_uart_messages_proto_rawDesc = "" +
 	"\n" +
-	"\x13uart_messages.proto\x12\x04alox\x1a\fnanopb.proto\"\xd3\x15\n" +
+	"\x13uart_messages.proto\x12\x04alox\x1a\fnanopb.proto\"\x92\x16\n" +
 	"\vUartMessage\x12%\n" +
 	"\x04type\x18\x01 \x01(\x0e2\x11.alox.MessageTypeR\x04type\x12,\n" +
 	"\vack_payload\x18\x02 \x01(\v2\t.alox.AckH\x00R\n" +
@@ -3801,7 +3891,8 @@ const file_uart_messages_proto_rawDesc = "" +
 	"\x15set_log_level_request\x18% \x01(\v2\x18.alox.SetLogLevelRequestH\x00R\x12setLogLevelRequest\x12P\n" +
 	"\x16set_log_level_response\x18& \x01(\v2\x19.alox.SetLogLevelResponseH\x00R\x13setLogLevelResponse\x12F\n" +
 	"\x12tap_config_request\x18' \x01(\v2\x16.alox.TapConfigRequestH\x00R\x10tapConfigRequest\x12I\n" +
-	"\x13tap_config_response\x18( \x01(\v2\x17.alox.TapConfigResponseH\x00R\x11tapConfigResponseB\t\n" +
+	"\x13tap_config_response\x18( \x01(\v2\x17.alox.TapConfigResponseH\x00R\x11tapConfigResponse\x12=\n" +
+	"\x0fble_stream_tick\x18) \x01(\v2\x13.alox.BleStreamTickH\x00R\rbleStreamTickB\t\n" +
 	"\apayload\"\x05\n" +
 	"\x03Ack\"!\n" +
 	"\vEchoPayload\x12\x12\n" +
@@ -3843,13 +3934,14 @@ const file_uart_messages_proto_rawDesc = "" +
 	"\bdeadzone\x18\x01 \x01(\rR\bdeadzone\x12\x1b\n" +
 	"\tclient_id\x18\x02 \x01(\rR\bclientId\x12\x18\n" +
 	"\asuccess\x18\x03 \x01(\bR\asuccess\x12%\n" +
-	"\x0eslaves_updated\x18\x04 \x01(\rR\rslavesUpdated\"\x80\x01\n" +
+	"\x0eslaves_updated\x18\x04 \x01(\rR\rslavesUpdated\"\x9d\x01\n" +
 	"\x12AccelStreamRequest\x12\x14\n" +
 	"\x05write\x18\x01 \x01(\bR\x05write\x12\x16\n" +
 	"\x06enable\x18\x02 \x01(\bR\x06enable\x12\x1b\n" +
 	"\tclient_id\x18\x03 \x01(\rR\bclientId\x12\x1f\n" +
 	"\vall_clients\x18\x04 \x01(\bR\n" +
-	"allClients\"\x8d\x01\n" +
+	"allClients\x12\x1b\n" +
+	"\tperiod_ms\x18\x05 \x01(\rR\bperiodMs\"\x8d\x01\n" +
 	"\x13AccelStreamResponse\x12\x18\n" +
 	"\aenabled\x18\x01 \x01(\bR\aenabled\x12\x1b\n" +
 	"\tclient_id\x18\x02 \x01(\rR\bclientId\x12\x18\n" +
@@ -3915,7 +4007,11 @@ const file_uart_messages_proto_rawDesc = "" +
 	"\x05accel\x18\x02 \x01(\v2\x16.alox.CacheClientAccelR\x05accel\x12&\n" +
 	"\x03tap\x18\x03 \x01(\v2\x14.alox.CacheClientTapR\x03tap\"O\n" +
 	"\x13CacheStatusResponse\x128\n" +
-	"\aclients\x18\x01 \x03(\v2\x17.alox.CacheClientStatusB\x05\x92?\x02\x10\x10R\aclients\"I\n" +
+	"\aclients\x18\x01 \x03(\v2\x17.alox.CacheClientStatusB\x05\x92?\x02\x10\x10R\aclients\"\x90\x01\n" +
+	"\rBleStreamTick\x12(\n" +
+	"\x10esp_timestamp_us\x18\x01 \x01(\x04R\x0eespTimestampUs\x12\x1b\n" +
+	"\tperiod_ms\x18\x02 \x01(\rR\bperiodMs\x128\n" +
+	"\aclients\x18\x03 \x03(\v2\x17.alox.CacheClientStatusB\x05\x92?\x02\x10\x10R\aclients\"I\n" +
 	"\x18EspNowUnicastTestRequest\x12\x1b\n" +
 	"\tclient_id\x18\x01 \x01(\rR\bclientId\x12\x10\n" +
 	"\x03seq\x18\x02 \x01(\rR\x03seq\"G\n" +
@@ -4032,7 +4128,7 @@ const file_uart_messages_proto_rawDesc = "" +
 	"\x0faggregate_bytes\x18\x03 \x01(\rR\x0eaggregateBytes\x12\x1f\n" +
 	"\vslave_count\x18\x04 \x01(\rR\n" +
 	"slaveCount\x12:\n" +
-	"\x06slaves\x18\x05 \x03(\v2\x1b.alox.OtaSlaveProgressEntryB\x05\x92?\x02\x10\x10R\x06slaves*\xaa\x03\n" +
+	"\x06slaves\x18\x05 \x03(\v2\x1b.alox.OtaSlaveProgressEntryB\x05\x92?\x02\x10\x10R\x06slaves*\xbf\x03\n" +
 	"\vMessageType\x12\v\n" +
 	"\aUNKNOWN\x10\x00\x12\a\n" +
 	"\x03ACK\x10\x01\x12\b\n" +
@@ -4060,7 +4156,8 @@ const file_uart_messages_proto_rawDesc = "" +
 	"\x10ESPNOW_ECHO_PING\x10\x1e\x12\x11\n" +
 	"\rSET_LOG_LEVEL\x10\x1f\x12\x0e\n" +
 	"\n" +
-	"TAP_CONFIG\x10 \"\x04\b\x18\x10\x18\"\x04\b\x1c\x10\x1c*G\n" +
+	"TAP_CONFIG\x10 \x12\x13\n" +
+	"\x0fBLE_STREAM_TICK\x10!\"\x04\b\x18\x10\x18\"\x04\b\x1c\x10\x1c*G\n" +
 	"\aTapKind\x12\f\n" +
 	"\bTAP_NONE\x10\x00\x12\x0e\n" +
 	"\n" +
@@ -4083,7 +4180,7 @@ func file_uart_messages_proto_rawDescGZIP() []byte {
 }
 
 var file_uart_messages_proto_enumTypes = make([]protoimpl.EnumInfo, 2)
-var file_uart_messages_proto_msgTypes = make([]protoimpl.MessageInfo, 46)
+var file_uart_messages_proto_msgTypes = make([]protoimpl.MessageInfo, 47)
 var file_uart_messages_proto_goTypes = []any{
 	(MessageType)(0),                  // 0: alox.MessageType
 	(TapKind)(0),                      // 1: alox.TapKind
@@ -4112,27 +4209,28 @@ var file_uart_messages_proto_goTypes = []any{
 	(*CacheClientTap)(nil),            // 24: alox.CacheClientTap
 	(*CacheClientStatus)(nil),         // 25: alox.CacheClientStatus
 	(*CacheStatusResponse)(nil),       // 26: alox.CacheStatusResponse
-	(*EspNowUnicastTestRequest)(nil),  // 27: alox.EspNowUnicastTestRequest
-	(*EspNowUnicastTestResponse)(nil), // 28: alox.EspNowUnicastTestResponse
-	(*EspNowEchoPingRequest)(nil),     // 29: alox.EspNowEchoPingRequest
-	(*EspNowEchoPingResponse)(nil),    // 30: alox.EspNowEchoPingResponse
-	(*LedRingProgressRequest)(nil),    // 31: alox.LedRingProgressRequest
-	(*LedRingProgressResponse)(nil),   // 32: alox.LedRingProgressResponse
-	(*EspNowFindMeRequest)(nil),       // 33: alox.EspNowFindMeRequest
-	(*EspNowFindMeResponse)(nil),      // 34: alox.EspNowFindMeResponse
-	(*RestartRequest)(nil),            // 35: alox.RestartRequest
-	(*RestartResponse)(nil),           // 36: alox.RestartResponse
-	(*SetLogLevelRequest)(nil),        // 37: alox.SetLogLevelRequest
-	(*SetLogLevelResponse)(nil),       // 38: alox.SetLogLevelResponse
-	(*TapConfigRequest)(nil),          // 39: alox.TapConfigRequest
-	(*TapConfigResponse)(nil),         // 40: alox.TapConfigResponse
-	(*OtaStartPayload)(nil),           // 41: alox.OtaStartPayload
-	(*OtaPayload)(nil),                // 42: alox.OtaPayload
-	(*OtaEndPayload)(nil),             // 43: alox.OtaEndPayload
-	(*OtaStatusPayload)(nil),          // 44: alox.OtaStatusPayload
-	(*OtaSlaveProgressRequest)(nil),   // 45: alox.OtaSlaveProgressRequest
-	(*OtaSlaveProgressEntry)(nil),     // 46: alox.OtaSlaveProgressEntry
-	(*OtaSlaveProgressResponse)(nil),  // 47: alox.OtaSlaveProgressResponse
+	(*BleStreamTick)(nil),             // 27: alox.BleStreamTick
+	(*EspNowUnicastTestRequest)(nil),  // 28: alox.EspNowUnicastTestRequest
+	(*EspNowUnicastTestResponse)(nil), // 29: alox.EspNowUnicastTestResponse
+	(*EspNowEchoPingRequest)(nil),     // 30: alox.EspNowEchoPingRequest
+	(*EspNowEchoPingResponse)(nil),    // 31: alox.EspNowEchoPingResponse
+	(*LedRingProgressRequest)(nil),    // 32: alox.LedRingProgressRequest
+	(*LedRingProgressResponse)(nil),   // 33: alox.LedRingProgressResponse
+	(*EspNowFindMeRequest)(nil),       // 34: alox.EspNowFindMeRequest
+	(*EspNowFindMeResponse)(nil),      // 35: alox.EspNowFindMeResponse
+	(*RestartRequest)(nil),            // 36: alox.RestartRequest
+	(*RestartResponse)(nil),           // 37: alox.RestartResponse
+	(*SetLogLevelRequest)(nil),        // 38: alox.SetLogLevelRequest
+	(*SetLogLevelResponse)(nil),       // 39: alox.SetLogLevelResponse
+	(*TapConfigRequest)(nil),          // 40: alox.TapConfigRequest
+	(*TapConfigResponse)(nil),         // 41: alox.TapConfigResponse
+	(*OtaStartPayload)(nil),           // 42: alox.OtaStartPayload
+	(*OtaPayload)(nil),                // 43: alox.OtaPayload
+	(*OtaEndPayload)(nil),             // 44: alox.OtaEndPayload
+	(*OtaStatusPayload)(nil),          // 45: alox.OtaStatusPayload
+	(*OtaSlaveProgressRequest)(nil),   // 46: alox.OtaSlaveProgressRequest
+	(*OtaSlaveProgressEntry)(nil),     // 47: alox.OtaSlaveProgressEntry
+	(*OtaSlaveProgressResponse)(nil),  // 48: alox.OtaSlaveProgressResponse
 }
 var file_uart_messages_proto_depIdxs = []int32{
 	0,  // 0: alox.UartMessage.type:type_name -> alox.MessageType
@@ -4141,22 +4239,22 @@ var file_uart_messages_proto_depIdxs = []int32{
 	5,  // 3: alox.UartMessage.version_response:type_name -> alox.VersionResponse
 	7,  // 4: alox.UartMessage.client_info_response:type_name -> alox.ClientInfoResponse
 	9,  // 5: alox.UartMessage.client_input_response:type_name -> alox.ClientInputResponse
-	41, // 6: alox.UartMessage.ota_start:type_name -> alox.OtaStartPayload
-	42, // 7: alox.UartMessage.ota_payload:type_name -> alox.OtaPayload
-	43, // 8: alox.UartMessage.ota_end:type_name -> alox.OtaEndPayload
-	44, // 9: alox.UartMessage.ota_status:type_name -> alox.OtaStatusPayload
+	42, // 6: alox.UartMessage.ota_start:type_name -> alox.OtaStartPayload
+	43, // 7: alox.UartMessage.ota_payload:type_name -> alox.OtaPayload
+	44, // 8: alox.UartMessage.ota_end:type_name -> alox.OtaEndPayload
+	45, // 9: alox.UartMessage.ota_status:type_name -> alox.OtaStatusPayload
 	10, // 10: alox.UartMessage.accel_deadzone_request:type_name -> alox.AccelDeadzoneRequest
 	11, // 11: alox.UartMessage.accel_deadzone_response:type_name -> alox.AccelDeadzoneResponse
-	27, // 12: alox.UartMessage.espnow_unicast_test_request:type_name -> alox.EspNowUnicastTestRequest
-	28, // 13: alox.UartMessage.espnow_unicast_test_response:type_name -> alox.EspNowUnicastTestResponse
-	45, // 14: alox.UartMessage.ota_slave_progress_request:type_name -> alox.OtaSlaveProgressRequest
-	47, // 15: alox.UartMessage.ota_slave_progress_response:type_name -> alox.OtaSlaveProgressResponse
-	31, // 16: alox.UartMessage.led_ring_progress_request:type_name -> alox.LedRingProgressRequest
-	32, // 17: alox.UartMessage.led_ring_progress_response:type_name -> alox.LedRingProgressResponse
-	33, // 18: alox.UartMessage.espnow_find_me_request:type_name -> alox.EspNowFindMeRequest
-	34, // 19: alox.UartMessage.espnow_find_me_response:type_name -> alox.EspNowFindMeResponse
-	35, // 20: alox.UartMessage.restart_request:type_name -> alox.RestartRequest
-	36, // 21: alox.UartMessage.restart_response:type_name -> alox.RestartResponse
+	28, // 12: alox.UartMessage.espnow_unicast_test_request:type_name -> alox.EspNowUnicastTestRequest
+	29, // 13: alox.UartMessage.espnow_unicast_test_response:type_name -> alox.EspNowUnicastTestResponse
+	46, // 14: alox.UartMessage.ota_slave_progress_request:type_name -> alox.OtaSlaveProgressRequest
+	48, // 15: alox.UartMessage.ota_slave_progress_response:type_name -> alox.OtaSlaveProgressResponse
+	32, // 16: alox.UartMessage.led_ring_progress_request:type_name -> alox.LedRingProgressRequest
+	33, // 17: alox.UartMessage.led_ring_progress_response:type_name -> alox.LedRingProgressResponse
+	34, // 18: alox.UartMessage.espnow_find_me_request:type_name -> alox.EspNowFindMeRequest
+	35, // 19: alox.UartMessage.espnow_find_me_response:type_name -> alox.EspNowFindMeResponse
+	36, // 20: alox.UartMessage.restart_request:type_name -> alox.RestartRequest
+	37, // 21: alox.UartMessage.restart_response:type_name -> alox.RestartResponse
 	12, // 22: alox.UartMessage.accel_stream_request:type_name -> alox.AccelStreamRequest
 	13, // 23: alox.UartMessage.accel_stream_response:type_name -> alox.AccelStreamResponse
 	14, // 24: alox.UartMessage.battery_status_request:type_name -> alox.BatteryStatusRequest
@@ -4165,28 +4263,30 @@ var file_uart_messages_proto_depIdxs = []int32{
 	20, // 27: alox.UartMessage.tap_notify_response:type_name -> alox.TapNotifyResponse
 	22, // 28: alox.UartMessage.cache_status_request:type_name -> alox.CacheStatusRequest
 	26, // 29: alox.UartMessage.cache_status_response:type_name -> alox.CacheStatusResponse
-	29, // 30: alox.UartMessage.espnow_echo_ping_request:type_name -> alox.EspNowEchoPingRequest
-	30, // 31: alox.UartMessage.espnow_echo_ping_response:type_name -> alox.EspNowEchoPingResponse
-	37, // 32: alox.UartMessage.set_log_level_request:type_name -> alox.SetLogLevelRequest
-	38, // 33: alox.UartMessage.set_log_level_response:type_name -> alox.SetLogLevelResponse
-	39, // 34: alox.UartMessage.tap_config_request:type_name -> alox.TapConfigRequest
-	40, // 35: alox.UartMessage.tap_config_response:type_name -> alox.TapConfigResponse
-	6,  // 36: alox.ClientInfoResponse.clients:type_name -> alox.ClientInfo
-	8,  // 37: alox.ClientInputResponse.clients:type_name -> alox.ClientInput
-	15, // 38: alox.BatterySample.lipo1:type_name -> alox.LipoReading
-	15, // 39: alox.BatterySample.lipo2:type_name -> alox.LipoReading
-	16, // 40: alox.BatteryStatusResponse.samples:type_name -> alox.BatterySample
-	1,  // 41: alox.TapEvent.kind:type_name -> alox.TapKind
-	1,  // 42: alox.CacheClientTap.kind:type_name -> alox.TapKind
-	23, // 43: alox.CacheClientStatus.accel:type_name -> alox.CacheClientAccel
-	24, // 44: alox.CacheClientStatus.tap:type_name -> alox.CacheClientTap
-	25, // 45: alox.CacheStatusResponse.clients:type_name -> alox.CacheClientStatus
-	46, // 46: alox.OtaSlaveProgressResponse.slaves:type_name -> alox.OtaSlaveProgressEntry
-	47, // [47:47] is the sub-list for method output_type
-	47, // [47:47] is the sub-list for method input_type
-	47, // [47:47] is the sub-list for extension type_name
-	47, // [47:47] is the sub-list for extension extendee
-	0,  // [0:47] is the sub-list for field type_name
+	30, // 30: alox.UartMessage.espnow_echo_ping_request:type_name -> alox.EspNowEchoPingRequest
+	31, // 31: alox.UartMessage.espnow_echo_ping_response:type_name -> alox.EspNowEchoPingResponse
+	38, // 32: alox.UartMessage.set_log_level_request:type_name -> alox.SetLogLevelRequest
+	39, // 33: alox.UartMessage.set_log_level_response:type_name -> alox.SetLogLevelResponse
+	40, // 34: alox.UartMessage.tap_config_request:type_name -> alox.TapConfigRequest
+	41, // 35: alox.UartMessage.tap_config_response:type_name -> alox.TapConfigResponse
+	27, // 36: alox.UartMessage.ble_stream_tick:type_name -> alox.BleStreamTick
+	6,  // 37: alox.ClientInfoResponse.clients:type_name -> alox.ClientInfo
+	8,  // 38: alox.ClientInputResponse.clients:type_name -> alox.ClientInput
+	15, // 39: alox.BatterySample.lipo1:type_name -> alox.LipoReading
+	15, // 40: alox.BatterySample.lipo2:type_name -> alox.LipoReading
+	16, // 41: alox.BatteryStatusResponse.samples:type_name -> alox.BatterySample
+	1,  // 42: alox.TapEvent.kind:type_name -> alox.TapKind
+	1,  // 43: alox.CacheClientTap.kind:type_name -> alox.TapKind
+	23, // 44: alox.CacheClientStatus.accel:type_name -> alox.CacheClientAccel
+	24, // 45: alox.CacheClientStatus.tap:type_name -> alox.CacheClientTap
+	25, // 46: alox.CacheStatusResponse.clients:type_name -> alox.CacheClientStatus
+	25, // 47: alox.BleStreamTick.clients:type_name -> alox.CacheClientStatus
+	47, // 48: alox.OtaSlaveProgressResponse.slaves:type_name -> alox.OtaSlaveProgressEntry
+	49, // [49:49] is the sub-list for method output_type
+	49, // [49:49] is the sub-list for method input_type
+	49, // [49:49] is the sub-list for extension type_name
+	49, // [49:49] is the sub-list for extension extendee
+	0,  // [0:49] is the sub-list for field type_name
 }
 
 func init() { file_uart_messages_proto_init() }
@@ -4230,6 +4330,7 @@ func file_uart_messages_proto_init() {
 		(*UartMessage_SetLogLevelResponse)(nil),
 		(*UartMessage_TapConfigRequest)(nil),
 		(*UartMessage_TapConfigResponse)(nil),
+		(*UartMessage_BleStreamTick)(nil),
 	}
 	type x struct{}
 	out := protoimpl.TypeBuilder{
@@ -4237,7 +4338,7 @@ func file_uart_messages_proto_init() {
 			GoPackagePath: reflect.TypeOf(x{}).PkgPath(),
 			RawDescriptor: unsafe.Slice(unsafe.StringData(file_uart_messages_proto_rawDesc), len(file_uart_messages_proto_rawDesc)),
 			NumEnums:      2,
-			NumMessages:   46,
+			NumMessages:   47,
 			NumExtensions: 0,
 			NumServices:   0,
 		},

goTool/serial_link.go

@@ -1,12 +1,6 @@
 package main
 
-import (
-	"errors"
-	"fmt"
-	"log"
-	"sync"
-	"time"
-)
+import "errors"
 
 // errUARTBusy is returned when the port is held for OTA (poller should not treat as unplug).
 var errUARTBusy = errors.New("uart busy (OTA in progress)")
@@ -14,171 +8,5 @@ var errUARTBusy = errors.New("uart busy (OTA in progress)")
 // errOTAInProgress is returned when a second OTA upload is attempted while one is running.
 var errOTAInProgress = errors.New("OTA upload already in progress")
 
-// managedSerial keeps the UART open and reconnects after I/O failures or unplug.
-type managedSerial struct {
-	portName string
-	baud     int
-	quiet    bool
-
-	mu        sync.Mutex
-	sp        *serialPort
-	otaActive bool // UART held for firmware upload; poll/API must not interleave
-}
-
-func newManagedSerial(portName string, baud int) *managedSerial {
-	return &managedSerial{
-		portName: portName,
-		baud:     baud,
-	}
-}
-
-func (m *managedSerial) Close() error {
-	m.mu.Lock()
-	defer m.mu.Unlock()
-	return m.closeLocked()
-}
-
-func (m *managedSerial) IsConnected() bool {
-	m.mu.Lock()
-	defer m.mu.Unlock()
-	return m.sp != nil
-}
-
-func (m *managedSerial) openLocked() error {
-	sp, err := openSerial(m.portName, m.baud)
-	if err != nil {
-		return err
-	}
-	sp.quiet = m.quiet
-	m.sp = sp
-	if !m.quiet {
-		log.Printf("UART %s connected (%d baud)", m.portName, m.baud)
-	}
-	return nil
-}
-
-func (m *managedSerial) closeLocked() error {
-	if m.sp == nil {
-		return nil
-	}
-	err := m.sp.port.Close()
-	m.sp = nil
-	return err
-}
-
-func (m *managedSerial) invalidateLocked(reason error) {
-	if m.sp == nil {
-		return
-	}
-	if !m.quiet {
-		log.Printf("UART %s disconnected: %v", m.portName, reason)
-	}
-	_ = m.closeLocked()
-}
-
-func (m *managedSerial) withPort(fn func(*serialPort) error) error {
-	return m.withPortLocked(false, fn)
-}
-
-// withPortPoll is like withPort but returns errUARTBusy during OTA (no TryLock race).
-func (m *managedSerial) withPortPoll(fn func(*serialPort) error) error {
-	return m.withPortLocked(true, fn)
-}
-
-func (m *managedSerial) withPortLocked(poll bool, fn func(*serialPort) error) error {
-	m.mu.Lock()
-	defer m.mu.Unlock()
-	if m.otaActive {
-		return errUARTBusy
-	}
-
-	if m.sp == nil {
-		if err := m.openLocked(); err != nil {
-			return fmt.Errorf("%s: %w", m.portName, err)
-		}
-	}
-
-	err := fn(m.sp)
-	if err != nil {
-		m.invalidateLocked(err)
-	}
-	return err
-}
-
-func (m *managedSerial) recoverAfterMasterRestart() {
-	const bootWait = 6 * time.Second
-
-	m.mu.Lock()
-	m.closeLocked()
-	m.mu.Unlock()
-
-	log.Printf("UART: master restart — waiting %s for boot", bootWait)
-	time.Sleep(bootWait)
-
-	m.mu.Lock()
-	defer m.mu.Unlock()
-	if err := m.openLocked(); err != nil {
-		log.Printf("UART reconnect after master restart: %v", err)
-		return
-	}
-	flushSerialInput(m.sp)
-	log.Printf("UART %s ready after master restart", m.portName)
-}
-
-func (m *managedSerial) exchangePayload(payload []byte, cmdName string) ([]byte, error) {
-	return m.exchangePayloadVia(m.withPort, payload, cmdName)
-}
-
-func (m *managedSerial) exchangePayloadPoll(payload []byte, cmdName string) ([]byte, error) {
-	return m.exchangePayloadVia(m.withPortPoll, payload, cmdName)
-}
-
-func (m *managedSerial) exchangePayloadVia(
-	portFn func(func(*serialPort) error) error,
-	payload []byte, cmdName string,
-) ([]byte, error) {
-	var resp []byte
-	err := portFn(func(sp *serialPort) error {
-		var e error
-		resp, e = sp.exchangePayloadLocked(payload, cmdName, readTimeout)
-		return e
-	})
-	return resp, err
-}
-
-func (m *managedSerial) exchange(cmdID byte, cmdName string) ([]byte, error) {
-	return m.exchangeVia(m.withPort, cmdID, cmdName)
-}
-
-func (m *managedSerial) exchangePoll(cmdID byte, cmdName string) ([]byte, error) {
-	return m.exchangeVia(m.withPortPoll, cmdID, cmdName)
-}
-
-func (m *managedSerial) exchangeVia(
-	portFn func(func(*serialPort) error) error,
-	cmdID byte, cmdName string,
-) ([]byte, error) {
-	var resp []byte
-	err := portFn(func(sp *serialPort) error {
-		var e error
-		resp, e = sp.exchangeLocked(cmdID, cmdName)
-		return e
-	})
-	return resp, err
-}
-
-func disconnectedState(portName string, err error) DashboardState {
-	msg := "UART disconnected"
-	if err != nil {
-		msg = err.Error()
-	}
-	return DashboardState{
-		UpdatedAt:     time.Now().Format(time.RFC3339),
-		SerialPort:    portName,
-		UARTConnected: false,
-		SerialOK:      false,
-		SerialError:   msg,
-		Master:        MasterView{OK: false, Error: msg},
-		Clients:       []ClientView{},
-	}
-}
+// managedSerial is an alias for managedHost (UART-first history).
+type managedSerial = managedHost

goTool/webui/index.html

@@ -179,8 +179,8 @@
       <span class="navbar-brand mb-0 h1">Powerpod</span>
       <span class="d-flex align-items-center gap-2">
         <span class="badge rounded-pill me-1"
-              :class="state.uart_connected ? 'badge-online' : 'badge-offline'"
-              x-text="state.uart_connected ? 'UART' : 'UART off'"></span>
+              :class="hostUp() ? 'badge-online' : 'badge-offline'"
+              x-text="hostBadge()"></span>
         <span class="badge rounded-pill" :class="wsConnected ? 'badge-online' : 'badge-offline'"
               x-text="wsConnected ? 'WS' : 'WS off'"></span>
         <small class="text-muted ms-2" x-text="state.updated_at || '—'"></small>
@@ -195,19 +195,177 @@
            x-text="configMsg"></div>
     </template>
 
+    <section class="card mb-4">
+      <div class="card-header d-flex flex-wrap justify-content-between align-items-center gap-2">
+        <span>Host-Verbindung</span>
+        <span class="text-muted small" x-text="hostEndpointLabel()"></span>
+      </div>
+      <div class="card-body">
+        <ul class="nav nav-pills mb-3 gap-1">
+          <li class="nav-item">
+            <button type="button" class="nav-link"
+                    :class="connTab === 'uart' ? 'active' : ''"
+                    @click="connTab = 'uart'">UART</button>
+          </li>
+          <li class="nav-item">
+            <button type="button" class="nav-link"
+                    :class="connTab === 'ble' ? 'active' : ''"
+                    @click="connTab = 'ble'">BLE</button>
+          </li>
+        </ul>
+
+        <div x-show="connTab === 'uart'" class="d-flex flex-wrap gap-2 align-items-end">
+          <div>
+            <label class="form-label text-muted small mb-1" for="uart-port">Port</label>
+            <select id="uart-port" class="form-control form-control-sm" style="min-width:12rem"
+                    x-model="uartPort" :disabled="hostBusy">
+              <option value="">— Port wählen —</option>
+              <template x-for="p in serialPorts" :key="p">
+                <option :value="p" x-text="p"></option>
+              </template>
+            </select>
+          </div>
+          <button type="button" class="btn btn-outline-secondary btn-sm"
+                  @click="refreshSerialPorts()" :disabled="hostBusy">Aktualisieren</button>
+          <button type="button" class="btn btn-primary btn-sm"
+                  @click="connectUART()" :disabled="hostBusy || !uartPort">Connect</button>
+          <button type="button" class="btn btn-outline-secondary btn-sm"
+                  @click="disconnectHost()" :disabled="hostBusy || !hostUp()">Disconnect</button>
+        </div>
+
+        <div x-show="connTab === 'ble'">
+          <div class="d-flex flex-wrap gap-2 align-items-center mb-2">
+            <button type="button" class="btn btn-primary btn-sm"
+                    @click="scanBLE()" :disabled="hostBusy || bleScanning"
+                    x-text="bleScanning ? 'Scan…' : 'Scan'"></button>
+            <button type="button" class="btn btn-outline-secondary btn-sm"
+                    @click="disconnectHost()" :disabled="hostBusy || !hostUp()">Disconnect</button>
+            <span class="text-muted small" x-show="bleScanErr" x-text="bleScanErr"></span>
+          </div>
+          <div class="table-responsive" x-show="bleDevices.length">
+            <table class="table table-sm pp-table mb-0">
+              <thead>
+                <tr><th>Name</th><th>Adresse</th><th>RSSI</th><th></th></tr>
+              </thead>
+              <tbody>
+                <template x-for="d in bleDevices" :key="d.address">
+                  <tr>
+                    <td x-text="d.name || '—'"></td>
+                    <td class="mac" x-text="d.address"></td>
+                    <td x-text="d.rssi"></td>
+                    <td class="text-end">
+                      <button type="button" class="btn btn-sm btn-primary"
+                              @click="connectBLE(d)" :disabled="hostBusy">Connect</button>
+                    </td>
+                  </tr>
+                </template>
+              </tbody>
+            </table>
+          </div>
+          <p class="text-muted small mb-0" x-show="!bleDevices.length && !bleScanning">
+            Scan startet eine kurze Suche (trennt aktive BLE-Verbindung).
+          </p>
+        </div>
+      </div>
+    </section>
+
+    <section class="card mb-4" x-show="isBLEHost()">
+      <div class="card-header">BLE-Tests</div>
+      <div class="card-body">
+        <p class="text-muted small mb-3">
+          Host↔Master-Latenz und Stream-Tick-Fenster (wie CLI <code>ble-rtt</code> / <code>ble-stream</code>).
+          Dashboard-Polling pausiert während des Laufs.
+        </p>
+        <div class="row g-3">
+          <div class="col-md-6">
+            <h6 class="text-secondary mb-2">RTT (VERSION)</h6>
+            <div class="d-flex flex-wrap gap-2 align-items-end mb-2">
+              <div>
+                <label class="form-label text-muted small mb-1" for="ble-rtt-count">Samples</label>
+                <input id="ble-rtt-count" type="number" class="form-control form-control-sm config-input"
+                       min="1" max="500" x-model.number="bleRtt.count" :disabled="bleTestBusy">
+              </div>
+              <div>
+                <label class="form-label text-muted small mb-1" for="ble-rtt-warmup">Warmup</label>
+                <input id="ble-rtt-warmup" type="number" class="form-control form-control-sm config-input"
+                       min="0" max="100" x-model.number="bleRtt.warmup" :disabled="bleTestBusy">
+              </div>
+              <button type="button" class="btn btn-primary btn-sm"
+                      @click="runBleRtt()" :disabled="bleTestBusy || busy"
+                      x-text="bleTestBusy === 'rtt' ? 'Läuft…' : 'Start RTT'"></button>
+            </div>
+            <template x-if="bleRtt.result">
+              <dl class="row small mb-0">
+                <dt class="col-5 text-muted">n / warmup</dt>
+                <dd class="col-7" x-text="bleRtt.result.stats?.n + ' / ' + bleRtt.result.warmup"></dd>
+                <dt class="col-5 text-muted">min / median</dt>
+                <dd class="col-7" x-text="fmtMs(bleRtt.result.stats?.min_ms) + ' / ' + fmtMs(bleRtt.result.stats?.median_ms)"></dd>
+                <dt class="col-5 text-muted">mean / max</dt>
+                <dd class="col-7" x-text="fmtMs(bleRtt.result.stats?.mean_ms) + ' / ' + fmtMs(bleRtt.result.stats?.max_ms)"></dd>
+                <dt class="col-5 text-muted" x-show="bleRtt.result.error">Fehler</dt>
+                <dd class="col-7 text-danger" x-show="bleRtt.result.error" x-text="bleRtt.result.error"></dd>
+              </dl>
+            </template>
+          </div>
+          <div class="col-md-6">
+            <h6 class="text-secondary mb-2">Stream-Ticks</h6>
+            <div class="d-flex flex-wrap gap-2 align-items-end mb-2">
+              <div>
+                <label class="form-label text-muted small mb-1" for="ble-stream-count">Ticks</label>
+                <input id="ble-stream-count" type="number" class="form-control form-control-sm config-input"
+                       min="2" max="500" x-model.number="bleStream.count" :disabled="bleTestBusy">
+              </div>
+              <div>
+                <label class="form-label text-muted small mb-1" for="ble-stream-period">Period ms</label>
+                <input id="ble-stream-period" type="number" class="form-control form-control-sm config-input"
+                       min="8" max="16" x-model.number="bleStream.period_ms" :disabled="bleTestBusy">
+              </div>
+              <div>
+                <label class="form-label text-muted small mb-1" for="ble-stream-tol">Tol ms</label>
+                <input id="ble-stream-tol" type="number" class="form-control form-control-sm config-input"
+                       min="0" max="20" step="0.5" x-model.number="bleStream.tol_ms" :disabled="bleTestBusy">
+              </div>
+              <button type="button" class="btn btn-primary btn-sm"
+                      @click="runBleStream()" :disabled="bleTestBusy || busy"
+                      x-text="bleTestBusy === 'stream' ? 'Läuft…' : 'Start Stream'"></button>
+            </div>
+            <template x-if="bleStream.result">
+              <dl class="row small mb-0">
+                <dt class="col-5 text-muted">received</dt>
+                <dd class="col-7" x-text="bleStream.result.received + ' / ' + bleStream.result.requested"></dd>
+                <dt class="col-5 text-muted">window_ok</dt>
+                <dd class="col-7"
+                    :class="bleStream.result.window_ok ? 'text-success' : 'text-warning'"
+                    x-text="bleStream.result.window_ok ? 'yes' : 'no'"></dd>
+                <dt class="col-5 text-muted">dT ESP</dt>
+                <dd class="col-7" x-text="fmtStats(bleStream.result.dt_esp_ms)"></dd>
+                <dt class="col-5 text-muted">dR PC</dt>
+                <dd class="col-7" x-text="fmtStats(bleStream.result.dr_pc_ms)"></dd>
+                <dt class="col-5 text-muted">outside tol</dt>
+                <dd class="col-7" x-text="bleStream.result.outside_tol + ' / ' + (bleStream.result.dt_esp_ms?.n || 0)"></dd>
+                <dt class="col-5 text-muted" x-show="bleStream.result.error">Fehler</dt>
+                <dd class="col-7 text-danger" x-show="bleStream.result.error" x-text="bleStream.result.error"></dd>
+              </dl>
+            </template>
+          </div>
+        </div>
+      </div>
+    </section>
+
     <div class="row g-4">
       <section class="col-lg-4">
         <div class="card h-100">
           <div class="card-header">Master (BMA456 lokal)</div>
           <div class="card-body">
-            <p class="text-muted small mb-2" x-text="'UART ' + (state.serial_port || '—')"></p>
+            <p class="text-muted small mb-2"
+               x-text="(state.host_transport || 'none').toUpperCase() + ' ' + (state.host_endpoint || state.serial_port || '—')"></p>
             <p class="text-muted small mb-3">Deadzone nur am Master — Slaves bleiben unverändert.</p>
-            <template x-if="!state.uart_connected">
+            <template x-if="!hostUp()">
               <div class="alert alert-warning py-2 mb-2"
-                   x-text="state.serial_error || 'UART disconnected — reconnecting…'"></div>
+                   x-text="state.serial_error || 'Host nicht verbunden — oben UART oder BLE wählen.'"></div>
             </template>
-            <template x-if="state.uart_connected && !state.serial_ok">
-              <div class="alert alert-danger py-2" x-text="state.serial_error || 'Serial error'"></div>
+            <template x-if="hostUp() && !state.serial_ok">
+              <div class="alert alert-danger py-2" x-text="state.serial_error || 'Host error'"></div>
             </template>
             <template x-if="state.master?.ok">
               <dl class="row mb-0">
@@ -242,26 +400,26 @@
                        min="0" max="4095" step="1"
                        placeholder="z. B. 100"
                        x-model.number="masterDz"
-                       :disabled="busy || !state.uart_connected">
+                       :disabled="busy || !hostUp()">
                 <button type="button" class="btn btn-outline-secondary btn-sm"
                         @click="readMasterDeadzone()"
-                        :disabled="busy || !state.uart_connected">
+                        :disabled="busy || !hostUp()">
                   Lesen
                 </button>
                 <button type="button" class="btn btn-primary btn-sm"
                         @click="setMasterDeadzone()"
-                        :disabled="busy || !state.uart_connected">
+                        :disabled="busy || !hostUp()">
                   Setzen
                 </button>
                 <button type="button" class="btn btn-outline-warning btn-sm"
                         @click="findMe()"
-                        :disabled="busy || !state.uart_connected"
+                        :disabled="busy || !hostUp()"
                         title="LED-Ring: Rot/Grün/Blau je 3×">
                   Find me
                 </button>
                 <button type="button" class="btn btn-outline-secondary btn-sm"
                         @click="restart(0)"
-                        :disabled="busy || !state.uart_connected"
+                        :disabled="busy || !hostUp()"
                         title="Master neu starten">
                   Restart
                 </button>
@@ -272,7 +430,7 @@
               <div class="d-flex flex-wrap gap-2 align-items-end">
                 <select id="master-log-level" class="form-select form-select-sm config-input"
                         x-model.number="masterLogLevel"
-                        :disabled="busy || !state.uart_connected">
+                        :disabled="busy || !hostUp()">
                   <option value="0">None (aus)</option>
                   <option value="1">Error</option>
                   <option value="2">Warn</option>
@@ -282,12 +440,12 @@
                 </select>
                 <button type="button" class="btn btn-outline-secondary btn-sm"
                         @click="readMasterLogLevel()"
-                        :disabled="busy || !state.uart_connected">
+                        :disabled="busy || !hostUp()">
                   Lesen
                 </button>
                 <button type="button" class="btn btn-primary btn-sm"
                         @click="setMasterLogLevel()"
-                        :disabled="busy || !state.uart_connected">
+                        :disabled="busy || !hostUp()">
                   Setzen
                 </button>
               </div>
@@ -297,65 +455,65 @@
                   <label class="form-label text-muted mb-0" for="tap-sens">sens (0–15)</label>
                   <input id="tap-sens" type="number" class="form-control form-control-sm"
                          min="0" max="15" x-model.number="masterTapCfg.tap_sens_thres"
-                         :disabled="busy || !state.uart_connected">
+                         :disabled="busy || !hostUp()">
                 </div>
                 <div class="col-6 col-md-4">
                   <label class="form-label text-muted mb-0" for="tap-max-gest">max_gest (×5ms)</label>
                   <input id="tap-max-gest" type="number" class="form-control form-control-sm"
                          min="0" max="65535" x-model.number="masterTapCfg.max_gest_dur"
-                         :disabled="busy || !state.uart_connected">
+                         :disabled="busy || !hostUp()">
                 </div>
                 <div class="col-6 col-md-4">
                   <label class="form-label text-muted mb-0" for="tap-shock">shock (×5ms)</label>
                   <input id="tap-shock" type="number" class="form-control form-control-sm"
                          min="0" max="65535" x-model.number="masterTapCfg.tap_shock_dur"
-                         :disabled="busy || !state.uart_connected">
+                         :disabled="busy || !hostUp()">
                 </div>
                 <div class="col-6 col-md-4">
                   <label class="form-label text-muted mb-0" for="tap-quiet">quiet (×5ms)</label>
                   <input id="tap-quiet" type="number" class="form-control form-control-sm"
                          min="0" max="65535" x-model.number="masterTapCfg.quite_time_after_gest"
-                         :disabled="busy || !state.uart_connected">
+                         :disabled="busy || !hostUp()">
                 </div>
                 <div class="col-6 col-md-4">
                   <label class="form-label text-muted mb-0" for="tap-wait">wait (0|1)</label>
                   <input id="tap-wait" type="number" class="form-control form-control-sm"
                          min="0" max="1" x-model.number="masterTapCfg.wait_for_timeout"
-                         :disabled="busy || !state.uart_connected">
+                         :disabled="busy || !hostUp()">
                 </div>
                 <div class="col-6 col-md-4">
                   <label class="form-label text-muted mb-0" for="tap-axis">axis (0=X…2=Z)</label>
                   <input id="tap-axis" type="number" class="form-control form-control-sm"
                          min="0" max="2" x-model.number="masterTapCfg.axis_sel"
-                         :disabled="busy || !state.uart_connected">
+                         :disabled="busy || !hostUp()">
                 </div>
               </div>
               <div class="d-flex flex-wrap gap-3 align-items-center mt-2 small">
                 <label class="tap-toggle mb-0">
                   <input type="checkbox" x-model="masterTapCfg.enable_single"
-                         :disabled="busy || !state.uart_connected"> Single
+                         :disabled="busy || !hostUp()"> Single
                 </label>
                 <label class="tap-toggle mb-0">
                   <input type="checkbox" x-model="masterTapCfg.enable_double"
-                         :disabled="busy || !state.uart_connected"> Double
+                         :disabled="busy || !hostUp()"> Double
                 </label>
                 <label class="tap-toggle mb-0">
                   <input type="checkbox" x-model="masterTapCfg.enable_triple"
-                         :disabled="busy || !state.uart_connected"> Triple
+                         :disabled="busy || !hostUp()"> Triple
                 </label>
                 <button type="button" class="btn btn-outline-secondary btn-sm"
                         @click="readMasterTapConfig()"
-                        :disabled="busy || !state.uart_connected">
+                        :disabled="busy || !hostUp()">
                   Lesen
                 </button>
                 <button type="button" class="btn btn-primary btn-sm"
                         @click="setMasterTapConfig()"
-                        :disabled="busy || !state.uart_connected">
+                        :disabled="busy || !hostUp()">
                   Setzen
                 </button>
               </div>
-              <p class="text-muted small mt-2 mb-0" x-show="!state.uart_connected">
-                UART nicht verbunden — Eingabe gesperrt.
+              <p class="text-muted small mt-2 mb-0" x-show="!hostUp()">
+                Host nicht verbunden — Eingabe gesperrt.
               </p>
             </div>
           </div>
@@ -373,12 +531,12 @@
                      :disabled="busy">
               <button type="button" class="btn btn-outline-secondary btn-sm"
                       @click="setDeadzoneAll(allDz)"
-                      :disabled="busy || !state.uart_connected">
+                      :disabled="busy || !hostUp()">
                 Alle Slaves
               </button>
               <button type="button" class="btn btn-outline-secondary btn-sm"
                       @click="setTapConfigAll()"
-                      :disabled="busy || !state.uart_connected"
+                      :disabled="busy || !hostUp()"
                       title="Master-Tap-Config an alle Slaves (ESP-NOW)">
                 Tap-Cfg alle
               </button>
@@ -386,24 +544,27 @@
             </div>
           </div>
           <p class="text-muted small px-3 pt-2 mb-0">
-            <strong>Live-Stream</strong> startet die schnelle <code>CACHE_STATUS</code>-Abfrage (~16&nbsp;ms).
-            Pro Slave <strong>Accel</strong> aktiviert den ESP-NOW-Accel-Stream; Tap-Notify (S/D/T) steuert
-            die Tap-Arten auf dem Slave.
+            <strong>Live-Stream</strong>: UART ≈ <code>CACHE_STATUS</code>-Poll (~16&nbsp;ms); BLE ≈
+            <code>BLE_STREAM_TICK</code>-Push. Pro Slave <strong>Accel</strong> aktiviert den ESP-NOW-Stream;
+            Tap-Notify (S/D/T) steuert die Tap-Arten auf dem Slave.
           </p>
           <div class="px-3 pb-2 d-flex flex-wrap gap-2 align-items-center">
             <button type="button"
                     class="btn btn-sm"
                     :class="state.live_stream ? 'btn-warning' : 'btn-success'"
                     @click="setLiveStream(!state.live_stream)"
-                    :disabled="busy || !state.uart_connected || !(state.clients || []).length"
+                    :disabled="busy || !hostUp() || !(state.clients || []).length"
                     x-text="state.live_stream ? 'Live-Stream aus' : 'Live-Stream an'"></button>
+            <span class="text-muted small font-monospace" x-show="isBLEHost() && state.live_stream"
+                  x-text="bleTickLabel()"
+                  title="Median Δt zwischen BLE_STREAM_TICK (esp_timestamp_us)"></span>
             <span class="text-muted small">Tap alle Slaves:</span>
             <label class="tap-toggle"><input type="checkbox" x-model="allTapSingle" :disabled="busy"> S</label>
             <label class="tap-toggle"><input type="checkbox" x-model="allTapDouble" :disabled="busy"> D</label>
             <label class="tap-toggle"><input type="checkbox" x-model="allTapTriple" :disabled="busy"> T</label>
             <button type="button" class="btn btn-outline-secondary btn-sm"
                     @click="setTapNotifyAll(allTapSingle, allTapDouble, allTapTriple)"
-                    :disabled="busy || !state.uart_connected">
+                    :disabled="busy || !hostUp()">
               Tap setzen
             </button>
           </div>
@@ -445,7 +606,7 @@
                         <span x-text="formatTapCfg(c.tap_config)" :title="tapCfgTitle(c.tap_config)"></span>
                         <button type="button" class="btn btn-outline-primary btn-sm ms-1 py-0 px-1"
                                 @click="setTapConfig(c.id, masterTapCfg)"
-                                :disabled="busy || !state.uart_connected || !c.available"
+                                :disabled="busy || !hostUp() || !c.available"
                                 title="Master-Tap-Config an diesen Slave">
                           Set
                         </button>
@@ -462,7 +623,7 @@
                                 class="btn btn-sm"
                                 :class="c.accel_stream ? 'btn-warning' : 'btn-outline-success'"
                                 @click="setAccelStream(c.id, !c.accel_stream)"
-                                :disabled="busy || !state.uart_connected || !c.available"
+                                :disabled="busy || !hostUp() || !c.available"
                                 x-text="c.accel_stream ? 'Aus' : 'An'"
                                 title="ESP-NOW Accel-Stream auf Slave"></button>
                       </td>
@@ -472,19 +633,19 @@
                             <input type="checkbox"
                                    :checked="c.tap_notify_single"
                                    @change="setTapNotify(c.id, $event.target.checked, c.tap_notify_double, c.tap_notify_triple)"
-                                   :disabled="busy || !state.uart_connected || !c.available"> S
+                                   :disabled="busy || !hostUp() || !c.available"> S
                           </label>
                           <label class="tap-toggle" title="Double tap">
                             <input type="checkbox"
                                    :checked="c.tap_notify_double"
                                    @change="setTapNotify(c.id, c.tap_notify_single, $event.target.checked, c.tap_notify_triple)"
-                                   :disabled="busy || !state.uart_connected || !c.available"> D
+                                   :disabled="busy || !hostUp() || !c.available"> D
                           </label>
                           <label class="tap-toggle" title="Triple tap">
                             <input type="checkbox"
                                    :checked="c.tap_notify_triple"
                                    @change="setTapNotify(c.id, c.tap_notify_single, c.tap_notify_double, $event.target.checked)"
-                                   :disabled="busy || !state.uart_connected || !c.available"> T
+                                   :disabled="busy || !hostUp() || !c.available"> T
                           </label>
                         </div>
                       </td>
@@ -500,36 +661,36 @@
                                  :disabled="busy">
                           <button type="button" class="btn btn-primary btn-sm"
                                   @click="setDeadzone(c.id, slaveDz[c.id] ?? c.deadzone ?? 100)"
-                                  :disabled="busy || !state.uart_connected || !c.available">
+                                  :disabled="busy || !hostUp() || !c.available">
                             Setzen
                           </button>
                           <button type="button" class="btn btn-outline-secondary btn-sm"
                                   @click="unicastTest(c.id)"
-                                  :disabled="busy || !state.uart_connected || !c.available"
+                                  :disabled="busy || !hostUp() || !c.available"
                                   title="ESP-NOW Unicast-Test">
                             Test
                           </button>
                           <button type="button" class="btn btn-outline-info btn-sm"
                                   @click="echoPing(c.id)"
-                                  :disabled="busy || !state.uart_connected || !c.available"
+                                  :disabled="busy || !hostUp() || !c.available"
                                   title="ESP-NOW Timestamp-Echo (Round-Trip-Latenz)">
                             Ping
                           </button>
                           <button type="button" class="btn btn-outline-info btn-sm"
                                   @click="ledRing({ clientId: c.id })"
-                                  :disabled="busy || !state.uart_connected || !c.available"
+                                  :disabled="busy || !hostUp() || !c.available"
                                   title="LED-Ring (aktueller Modus)">
                             LED
                           </button>
                           <button type="button" class="btn btn-outline-warning btn-sm"
                                   @click="ledRing({ clientId: c.id, mode: 'find-me' })"
-                                  :disabled="busy || !state.uart_connected || !c.available"
+                                  :disabled="busy || !hostUp() || !c.available"
                                   title="Find me">
                             Find
                           </button>
                           <button type="button" class="btn btn-outline-secondary btn-sm"
                                   @click="restart(c.id)"
-                                  :disabled="busy || !state.uart_connected || !c.available"
+                                  :disabled="busy || !hostUp() || !c.available"
                                   title="Neustart per ESP-NOW">
                             Restart
                           </button>
@@ -602,17 +763,17 @@
               <div class="col-md-4 d-flex flex-wrap gap-2">
                 <button type="button" class="btn btn-primary btn-sm"
                         @click="ledRing({ clientId: 0 })"
-                        :disabled="busy || !state.uart_connected">
+                        :disabled="busy || !hostUp()">
                   Master
                 </button>
                 <button type="button" class="btn btn-outline-primary btn-sm"
                         @click="ledRing({ allClients: true, slavesOnly: true })"
-                        :disabled="busy || !state.uart_connected">
+                        :disabled="busy || !hostUp()">
                   Alle Slaves
                 </button>
                 <button type="button" class="btn btn-outline-secondary btn-sm"
                         @click="ledRing({ allClients: true })"
-                        :disabled="busy || !state.uart_connected">
+                        :disabled="busy || !hostUp()">
                   Alle + Master
                 </button>
               </div>
@@ -621,23 +782,23 @@
         </div>
       </section>
 
-      <section class="col-12">
+      <section class="col-12" x-show="isUARTHost() || !hostUp()">
         <div class="card">
           <div class="card-header">Firmware OTA (A/B)</div>
           <div class="card-body">
             <p class="text-muted small mb-3">
-              Lädt eine <code>.bin</code> auf den Master (UART), danach verteilt die Firmware automatisch per ESP-NOW an alle verfügbaren Slaves.
-              Während des Uploads pausiert das Live-Polling.
+              Lädt eine <code>.bin</code> auf den Master (nur UART-Host, DIP8=0), danach verteilt die Firmware automatisch per ESP-NOW an alle verfügbaren Slaves.
+              Während des Uploads pausiert das Live-Polling. Bei BLE-Host ist OTA nicht verfügbar.
             </p>
             <div class="mb-3">
               <input type="file" class="form-control form-control-sm" accept=".bin,application/octet-stream"
                      @change="otaFile = $event.target.files[0]"
-                     :disabled="ota.active || busy || !state.uart_connected">
+                     :disabled="ota.active || busy || !isUARTHost()">
             </div>
             <div class="d-flex flex-wrap gap-2 align-items-center mb-2">
               <button type="button" class="btn btn-primary btn-sm"
                       @click="uploadOTA()"
-                      :disabled="ota.active || busy || !state.uart_connected || !otaFile">
+                      :disabled="ota.active || busy || !isUARTHost() || !otaFile">
                 Firmware hochladen
               </button>
               <span class="text-muted small" x-show="otaFile"
@@ -666,7 +827,7 @@
                     <td class="ota-restart-col text-end">
                       <button type="button" class="btn btn-outline-secondary btn-sm"
                               @click="restart(0)"
-                              :disabled="busy || !state.uart_connected">
+                              :disabled="busy || !hostUp()">
                         Restart
                       </button>
                     </td>
@@ -703,7 +864,7 @@
                       <td class="ota-restart-col text-end">
                         <button type="button" class="btn btn-outline-secondary btn-sm"
                                 @click="restart(row.id)"
-                                :disabled="busy || !state.uart_connected">
+                                :disabled="busy || !hostUp()">
                           Restart
                         </button>
                       </td>
@@ -733,6 +894,16 @@
         state: { master: {}, clients: [] },
         ws: null,
         wsConnected: false,
+        connTab: 'uart',
+        uartPort: '',
+        serialPorts: [],
+        bleDevices: [],
+        bleScanning: false,
+        bleScanErr: '',
+        hostBusy: false,
+        bleTestBusy: false,
+        bleRtt: { count: 50, warmup: 5, result: null },
+        bleStream: { count: 50, period_ms: 16, tol_ms: 2, result: null },
         masterDz: 100,
         masterDzSeeded: false,
         masterLogLevel: 0,
@@ -779,18 +950,212 @@
           blinkMs: 350,
           blinkCount: 1
         },
+        hostUp() {
+          return !!(this.state?.host_connected || this.state?.uart_connected);
+        },
+        isUARTHost() {
+          return this.hostUp() && (this.state?.host_transport || 'uart') === 'uart';
+        },
+        isBLEHost() {
+          return this.hostUp() && this.state?.host_transport === 'ble';
+        },
+        bleTickLabel() {
+          const t = this.state?.ble_tick;
+          if (!t || !t.samples) return 'BLE tick: …';
+          const med = Number(t.median_ms).toFixed(2);
+          const period = t.period_ms != null ? t.period_ms : '—';
+          return `BLE tick median ${med} ms (n=${t.samples}, period ${period} ms)`;
+        },
+        fmtMs(v) {
+          if (v == null || Number.isNaN(v)) return '—';
+          return Number(v).toFixed(3) + ' ms';
+        },
+        fmtStats(s) {
+          if (!s?.n) return '—';
+          return `min ${this.fmtMs(s.min_ms)} · med ${this.fmtMs(s.median_ms)} · mean ${this.fmtMs(s.mean_ms)} · max ${this.fmtMs(s.max_ms)}`;
+        },
+        async runBleRtt() {
+          this.bleTestBusy = 'rtt';
+          this.bleRtt.result = null;
+          try {
+            const r = await fetch('/api/ble-rtt', {
+              method: 'POST',
+              headers: { 'Content-Type': 'application/json' },
+              body: JSON.stringify({
+                count: this.bleRtt.count,
+                warmup: this.bleRtt.warmup,
+              }),
+            });
+            const data = await r.json();
+            this.bleRtt.result = data;
+            if (!data.success) {
+              this.flash(data.error || 'BLE RTT fehlgeschlagen', false);
+            } else {
+              this.flash(
+                `BLE RTT: mean ${Number(data.stats?.mean_ms).toFixed(3)} ms (n=${data.stats?.n})`,
+                true
+              );
+            }
+          } catch (e) {
+            this.flash(String(e), false);
+          } finally {
+            this.bleTestBusy = false;
+          }
+        },
+        async runBleStream() {
+          this.bleTestBusy = 'stream';
+          this.bleStream.result = null;
+          try {
+            const r = await fetch('/api/ble-stream', {
+              method: 'POST',
+              headers: { 'Content-Type': 'application/json' },
+              body: JSON.stringify({
+                count: this.bleStream.count,
+                period_ms: this.bleStream.period_ms,
+                tol_ms: this.bleStream.tol_ms,
+                timeout_s: 20,
+              }),
+            });
+            const data = await r.json();
+            this.bleStream.result = data;
+            if (!data.success) {
+              this.flash(data.error || 'BLE Stream-Test fehlgeschlagen', false);
+            } else {
+              this.flash(
+                `BLE Stream: ${data.received}/${data.requested} ticks, window_ok=${data.window_ok ? 'yes' : 'no'}`,
+                true
+              );
+            }
+          } catch (e) {
+            this.flash(String(e), false);
+          } finally {
+            this.bleTestBusy = false;
+          }
+        },
+        hostBadge() {
+          const t = this.state?.host_transport || 'none';
+          if (!this.hostUp()) return 'off';
+          if (t === 'ble') return 'BLE';
+          if (t === 'uart') return 'UART';
+          return 'on';
+        },
+        hostEndpointLabel() {
+          const ep = this.state?.host_endpoint || this.state?.serial_port || '';
+          const t = this.state?.host_transport || 'none';
+          return ep ? `${t}: ${ep}` : t;
+        },
+        async refreshSerialPorts() {
+          try {
+            const r = await fetch('/api/serial/ports');
+            const data = await r.json();
+            this.serialPorts = data.ports || [];
+            if (!this.uartPort && this.serialPorts.length) {
+              this.uartPort = this.serialPorts[0];
+            }
+          } catch (_) {
+            this.serialPorts = [];
+          }
+        },
+        async connectUART() {
+          if (!this.uartPort) return;
+          this.hostBusy = true;
+          this.bleScanErr = '';
+          try {
+            const r = await fetch('/api/host/connect', {
+              method: 'POST',
+              headers: { 'Content-Type': 'application/json' },
+              body: JSON.stringify({ transport: 'uart', port: this.uartPort }),
+            });
+            const data = await r.json();
+            if (!r.ok || data.error) {
+              this.flash(data.error || 'UART connect failed', false);
+            } else {
+              this.flash('UART verbunden: ' + (data.endpoint || this.uartPort), true);
+            }
+          } catch (e) {
+            this.flash(String(e), false);
+          } finally {
+            this.hostBusy = false;
+          }
+        },
+        async scanBLE() {
+          this.bleScanning = true;
+          this.bleScanErr = '';
+          this.bleDevices = [];
+          this.hostBusy = true;
+          try {
+            const r = await fetch('/api/ble/scan', {
+              method: 'POST',
+              headers: { 'Content-Type': 'application/json' },
+              body: JSON.stringify({ timeout_s: 5 }),
+            });
+            const data = await r.json();
+            if (data.error) this.bleScanErr = data.error;
+            this.bleDevices = (data.devices || []).slice().sort((a, b) => (b.rssi || 0) - (a.rssi || 0));
+          } catch (e) {
+            this.bleScanErr = String(e);
+          } finally {
+            this.bleScanning = false;
+            this.hostBusy = false;
+          }
+        },
+        async connectBLE(d) {
+          if (!d?.address) return;
+          this.hostBusy = true;
+          this.bleScanErr = '';
+          try {
+            const r = await fetch('/api/host/connect', {
+              method: 'POST',
+              headers: { 'Content-Type': 'application/json' },
+              body: JSON.stringify({
+                transport: 'ble',
+                address: d.address,
+                name: d.name || '',
+              }),
+            });
+            const data = await r.json();
+            if (!r.ok || data.error) {
+              this.flash(data.error || 'BLE connect failed', false);
+            } else {
+              this.flash('BLE verbunden: ' + (data.endpoint || d.address), true);
+              this.connTab = 'ble';
+            }
+          } catch (e) {
+            this.flash(String(e), false);
+          } finally {
+            this.hostBusy = false;
+          }
+        },
+        async disconnectHost() {
+          this.hostBusy = true;
+          try {
+            await fetch('/api/host/disconnect', { method: 'POST' });
+            this.flash('Host getrennt', true);
+          } catch (e) {
+            this.flash(String(e), false);
+          } finally {
+            this.hostBusy = false;
+          }
+        },
         connect() {
           const proto = location.protocol === 'https:' ? 'wss:' : 'ws:';
           const url = proto + '//' + location.host + '/ws';
+          this.refreshSerialPorts();
           if (this._batteryTimer) clearInterval(this._batteryTimer);
           this._batteryTimer = setInterval(() => this.refreshBattery(), 5000);
           if (this._tapTimer) clearInterval(this._tapTimer);
           this._tapTimer = setInterval(() => { this._tapClock++; }, 250);
           const connect = () => {
+            if (this.ws && (this.ws.readyState === WebSocket.OPEN ||
+                this.ws.readyState === WebSocket.CONNECTING)) {
+              try { this.ws.close(); } catch (_) {}
+            }
             this.ws = new WebSocket(url);
             this.ws.onopen = () => {
               this.wsConnected = true;
+              this._lastWsAt = Date.now();
               this.refreshBattery();
+              this.refreshSerialPorts();
             };
             this.ws.onclose = () => {
               this.wsConnected = false;
@@ -798,6 +1163,7 @@
             };
             this.ws.onmessage = (e) => {
               try {
+                this._lastWsAt = Date.now();
                 const msg = JSON.parse(e.data);
                 if (msg.type === 'ota_progress') {
                   this.applyOTAProgress(msg);
@@ -809,6 +1175,8 @@
                 }
                 const prev = this.state;
                 this.state = msg;
+                if (msg.host_transport === 'ble') this.connTab = 'ble';
+                else if (msg.host_transport === 'uart') this.connTab = 'uart';
                 this.preserveBatteryInState(prev, this.state);
                 this.syncTapDisplay(msg.clients || []);
                 if (!this.masterDzSeeded && msg.master?.deadzone != null) {
@@ -827,6 +1195,14 @@
               } catch (_) {}
             };
           };
+          if (this._wsWatch) clearInterval(this._wsWatch);
+          // If server dropped us from the hub without closing, force reconnect.
+          this._wsWatch = setInterval(() => {
+            if (!this.wsConnected || !this.state?.live_stream) return;
+            if (Date.now() - (this._lastWsAt || 0) > 4000) {
+              try { this.ws?.close(); } catch (_) {}
+            }
+          }, 2000);
           connect();
         },
         preserveBatteryInState(prev, next) {
@@ -898,7 +1274,7 @@
           };
         },
         async refreshBattery() {
-          if (!this.state?.uart_connected) return;
+          if (!this.hostUp()) return;
           try {
             const r = await fetch('/api/battery?all_clients=1');
             if (!r.ok) return;

main/CMakeLists.txt

@@ -12,6 +12,9 @@ idf_component_register(
   "powerpod.c"
   "led_ring.c"
   "uart.c"
+  "host_transport.c"
+  "ble_host.c"
+  "ble_stream.c"
   "uart_proto.c"
   "uart_cmd.c"
   "cmd/cmd_handler.c"
@@ -59,6 +62,7 @@ idf_component_register(
   esp_netif
   esp_event
   nvs_flash
+  bt
   PRIV_REQUIRES
   esp_driver_gpio
   esp_driver_uart

main/app_config.h

@@ -9,6 +9,8 @@
 typedef struct {
   bool master;
   uint8_t network;
+  /** false = UART host, true = BLE host (DIP8; mutual exclusive, boot-only). */
+  bool host_ble;
   char running_partition[APP_RUNNING_PARTITION_LABEL_MAX];
 } app_config_t;
 

main/ble_host.c

@@ -0,0 +1,415 @@
+#include "ble_host.h"
+#include "esp_log.h"
+#include "esp_timer.h"
+#include "host_transport.h"
+#include "nvs_flash.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+
+#include "nimble/nimble_port.h"
+#include "nimble/nimble_port_freertos.h"
+#include "host/ble_att.h"
+#include "host/ble_hs.h"
+#include "host/util/util.h"
+#include "services/gap/ble_svc_gap.h"
+#include "services/gatt/ble_svc_gatt.h"
+
+#include <string.h>
+
+static const char *TAG = "[BLE_HOST]";
+static const char *DEVICE_NAME = "Powerpod";
+
+#define BLE_CONN_ITVL_MIN_UNITS 6 /* 7.5 ms */
+#define BLE_CONN_ITVL_MAX_UNITS 6
+#define BLE_CONN_TUNE_MAX_TRIES 6
+
+/*
+ * Nordic UART style:
+ *   Service:        6e400001-b5a3-f393-e0a9-e50e24dcca9e
+ *   Characteristic: 6e400002-b5a3-f393-e0a9-e50e24dcca9e
+ * Write = host→ESP (framed), Notify = ESP→host (framed).
+ */
+static const ble_uuid128_t ble_svc_uuid =
+    BLE_UUID128_INIT(0x9e, 0xca, 0xdc, 0x24, 0x0e, 0xe5, 0xa9, 0xe0, 0x93, 0xf3,
+                     0xa3, 0xb5, 0x01, 0x00, 0x40, 0x6e);
+static const ble_uuid128_t ble_chr_uuid =
+    BLE_UUID128_INIT(0x9e, 0xca, 0xdc, 0x24, 0x0e, 0xe5, 0xa9, 0xe0, 0x93, 0xf3,
+                     0xa3, 0xb5, 0x02, 0x00, 0x40, 0x6e);
+
+static uint8_t own_addr_type;
+static uint16_t conn_handle = BLE_HS_CONN_HANDLE_NONE;
+static uint16_t ble_chr_val_handle;
+static bool notify_enabled;
+static uint16_t att_mtu = 23;
+static esp_timer_handle_t conn_tune_timer;
+static uint8_t conn_tune_tries;
+
+static int ble_gap_event(struct ble_gap_event *event, void *arg);
+static void ble_request_fast_conn_params(uint16_t handle);
+static void ble_optimize_link(uint16_t handle);
+
+bool ble_host_ready(void) {
+  return notify_enabled && conn_handle != BLE_HS_CONN_HANDLE_NONE;
+}
+
+uint16_t ble_host_att_mtu(void) { return att_mtu; }
+
+uint16_t ble_host_max_payload(void) {
+  if (att_mtu < 4) {
+    return 20;
+  }
+  return (uint16_t)(att_mtu - 3);
+}
+
+static esp_err_t ble_host_tx(const uint8_t *frame, size_t frame_len) {
+  struct os_mbuf *om;
+  int rc;
+
+  if (!ble_host_ready()) {
+    return ESP_ERR_INVALID_STATE;
+  }
+  if (frame_len == 0 || frame_len > ble_host_max_payload()) {
+    return ESP_ERR_INVALID_SIZE;
+  }
+
+  om = ble_hs_mbuf_from_flat(frame, (uint16_t)frame_len);
+  if (om == NULL) {
+    return ESP_ERR_NO_MEM;
+  }
+
+  rc = ble_gatts_notify_custom(conn_handle, ble_chr_val_handle, om);
+  if (rc != 0) {
+    os_mbuf_free_chain(om);
+    return ESP_FAIL;
+  }
+  return ESP_OK;
+}
+
+static void ble_conn_tune_timer_cb(void *arg) {
+  struct ble_gap_conn_desc desc;
+
+  (void)arg;
+  if (conn_handle == BLE_HS_CONN_HANDLE_NONE) {
+    return;
+  }
+  if (ble_gap_conn_find(conn_handle, &desc) != 0) {
+    return;
+  }
+  if (desc.conn_itvl <= BLE_CONN_ITVL_MAX_UNITS) {
+    ESP_LOGI(TAG, "conn already at interval_us=%lu",
+             (unsigned long)desc.conn_itvl * 1250UL);
+    return;
+  }
+  if (conn_tune_tries >= BLE_CONN_TUNE_MAX_TRIES) {
+    ESP_LOGW(TAG, "central kept interval_us=%lu (ESP requested 7500)",
+             (unsigned long)desc.conn_itvl * 1250UL);
+    return;
+  }
+
+  conn_tune_tries++;
+  ESP_LOGI(TAG, "retry fast conn params (%u/%u); current interval_us=%lu",
+           conn_tune_tries, BLE_CONN_TUNE_MAX_TRIES,
+           (unsigned long)desc.conn_itvl * 1250UL);
+  ble_request_fast_conn_params(conn_handle);
+  esp_timer_start_once(conn_tune_timer, 750 * 1000);
+}
+
+static void ble_schedule_conn_tune(void) {
+  conn_tune_tries = 0;
+  esp_timer_stop(conn_tune_timer);
+  esp_timer_start_once(conn_tune_timer, 300 * 1000);
+}
+
+static void ble_request_fast_conn_params(uint16_t handle) {
+  struct ble_gap_upd_params params = {
+      .itvl_min = BLE_CONN_ITVL_MIN_UNITS,
+      .itvl_max = BLE_CONN_ITVL_MAX_UNITS,
+      .latency = 0,
+      .supervision_timeout = 400,
+      .min_ce_len = 0,
+      .max_ce_len = 24,
+  };
+  int rc = ble_gap_update_params(handle, &params);
+  if (rc != 0) {
+    ESP_LOGW(TAG, "conn param update request failed: %d", rc);
+  } else {
+    ESP_LOGI(TAG, "requested conn interval 7.5 ms");
+  }
+}
+
+static void ble_optimize_link(uint16_t handle) {
+  int rc;
+
+  /*
+   * Do NOT request 2M PHY here. With ESP-NOW/WiFi coexistence the controller
+   * can assert in llc_phy_upd (e.g. "BLE assert llc_phy_upd.c …") and the
+   * host link dies — no further responses. Stay on default 1M.
+   */
+  ble_request_fast_conn_params(handle);
+
+  rc = ble_gap_set_data_len(handle, 251, 2120);
+  if (rc != 0) {
+    ESP_LOGW(TAG, "data len request failed: %d", rc);
+  }
+
+  ble_schedule_conn_tune();
+}
+
+static void ble_advertise(void) {
+  struct ble_gap_adv_params adv_params;
+  struct ble_hs_adv_fields fields;
+  int rc;
+
+  memset(&fields, 0, sizeof(fields));
+  fields.flags = BLE_HS_ADV_F_DISC_GEN | BLE_HS_ADV_F_BREDR_UNSUP;
+  fields.tx_pwr_lvl_is_present = 1;
+  fields.tx_pwr_lvl = BLE_HS_ADV_TX_PWR_LVL_AUTO;
+  fields.name = (uint8_t *)DEVICE_NAME;
+  fields.name_len = strlen(DEVICE_NAME);
+  fields.name_is_complete = 1;
+
+  rc = ble_gap_adv_set_fields(&fields);
+  if (rc != 0) {
+    ESP_LOGE(TAG, "adv set fields failed: %d", rc);
+    return;
+  }
+
+  memset(&adv_params, 0, sizeof(adv_params));
+  adv_params.conn_mode = BLE_GAP_CONN_MODE_UND;
+  adv_params.disc_mode = BLE_GAP_DISC_MODE_GEN;
+  adv_params.itvl_min = 0x20;
+  adv_params.itvl_max = 0x30;
+
+  rc = ble_gap_adv_start(own_addr_type, NULL, BLE_HS_FOREVER, &adv_params,
+                         ble_gap_event, NULL);
+  if (rc != 0) {
+    ESP_LOGE(TAG, "adv start failed: %d", rc);
+    return;
+  }
+
+  ESP_LOGI(TAG, "advertising as \"%s\"", DEVICE_NAME);
+}
+
+static int ble_chr_access(uint16_t conn_handle_arg, uint16_t attr_handle,
+                          struct ble_gatt_access_ctxt *ctxt, void *arg) {
+  (void)conn_handle_arg;
+  (void)attr_handle;
+  (void)arg;
+
+  switch (ctxt->op) {
+  case BLE_GATT_ACCESS_OP_READ_CHR:
+    return 0;
+
+  case BLE_GATT_ACCESS_OP_WRITE_CHR: {
+    uint16_t om_len = OS_MBUF_PKTLEN(ctxt->om);
+    uint8_t buf[512];
+    uint16_t copied = 0;
+    int rc;
+
+    if (om_len == 0 || om_len > sizeof(buf)) {
+      return BLE_ATT_ERR_INVALID_ATTR_VALUE_LEN;
+    }
+
+    rc = ble_hs_mbuf_to_flat(ctxt->om, buf, sizeof(buf), &copied);
+    if (rc != 0) {
+      return BLE_ATT_ERR_UNLIKELY;
+    }
+
+    host_rx_bytes(buf, copied);
+    return 0;
+  }
+
+  default:
+    return BLE_ATT_ERR_UNLIKELY;
+  }
+}
+
+static const struct ble_gatt_svc_def gatt_svcs[] = {
+    {
+        .type = BLE_GATT_SVC_TYPE_PRIMARY,
+        .uuid = &ble_svc_uuid.u,
+        .characteristics =
+            (struct ble_gatt_chr_def[]){
+                {
+                    .uuid = &ble_chr_uuid.u,
+                    .access_cb = ble_chr_access,
+                    .val_handle = &ble_chr_val_handle,
+                    .flags = BLE_GATT_CHR_F_READ | BLE_GATT_CHR_F_WRITE |
+                             BLE_GATT_CHR_F_WRITE_NO_RSP | BLE_GATT_CHR_F_NOTIFY,
+                },
+                {0},
+            },
+    },
+    {0},
+};
+
+static int gatt_svr_init(void) {
+  int rc;
+
+  ble_svc_gap_init();
+  ble_svc_gatt_init();
+
+  rc = ble_gatts_count_cfg(gatt_svcs);
+  if (rc != 0) {
+    return rc;
+  }
+
+  return ble_gatts_add_svcs(gatt_svcs);
+}
+
+static int ble_gap_event(struct ble_gap_event *event, void *arg) {
+  (void)arg;
+
+  switch (event->type) {
+  case BLE_GAP_EVENT_CONNECT:
+    ESP_LOGI(TAG, "connection %s; status=%d handle=%d",
+             event->connect.status == 0 ? "established" : "failed",
+             event->connect.status, event->connect.conn_handle);
+    if (event->connect.status != 0) {
+      ble_advertise();
+    } else {
+      conn_handle = event->connect.conn_handle;
+      ble_optimize_link(conn_handle);
+    }
+    return 0;
+
+  case BLE_GAP_EVENT_DISCONNECT:
+    ESP_LOGI(TAG, "disconnect; reason=%d", event->disconnect.reason);
+    esp_timer_stop(conn_tune_timer);
+    conn_tune_tries = 0;
+    conn_handle = BLE_HS_CONN_HANDLE_NONE;
+    notify_enabled = false;
+    att_mtu = 23;
+    ble_advertise();
+    return 0;
+
+  case BLE_GAP_EVENT_CONN_UPDATE: {
+    struct ble_gap_conn_desc desc;
+    if (ble_gap_conn_find(event->conn_update.conn_handle, &desc) == 0) {
+      ESP_LOGI(TAG, "conn updated; status=%d interval_us=%lu latency=%u",
+               event->conn_update.status,
+               (unsigned long)desc.conn_itvl * 1250UL, desc.conn_latency);
+      if (event->conn_update.status == 0 &&
+          desc.conn_itvl > BLE_CONN_ITVL_MAX_UNITS &&
+          conn_tune_tries < BLE_CONN_TUNE_MAX_TRIES) {
+        esp_timer_stop(conn_tune_timer);
+        esp_timer_start_once(conn_tune_timer, 500 * 1000);
+      }
+    }
+    return 0;
+  }
+
+  case BLE_GAP_EVENT_PHY_UPDATE_COMPLETE:
+    ESP_LOGI(TAG, "phy update; status=%d tx=%u rx=%u",
+             event->phy_updated.status, event->phy_updated.tx_phy,
+             event->phy_updated.rx_phy);
+    return 0;
+
+  case BLE_GAP_EVENT_ADV_COMPLETE:
+    ESP_LOGI(TAG, "advertise complete; reason=%d", event->adv_complete.reason);
+    ble_advertise();
+    return 0;
+
+  case BLE_GAP_EVENT_SUBSCRIBE:
+    if (event->subscribe.attr_handle == ble_chr_val_handle) {
+      notify_enabled = event->subscribe.cur_notify;
+      ESP_LOGI(TAG, "notify %s", notify_enabled ? "enabled" : "disabled");
+      if (notify_enabled && conn_handle != BLE_HS_CONN_HANDLE_NONE) {
+        ble_request_fast_conn_params(conn_handle);
+      }
+    }
+    return 0;
+
+  case BLE_GAP_EVENT_MTU:
+    att_mtu = event->mtu.value;
+    ESP_LOGI(TAG, "mtu update; handle=%d mtu=%d", event->mtu.conn_handle,
+             event->mtu.value);
+    return 0;
+
+  default:
+    return 0;
+  }
+}
+
+static void ble_on_sync(void) {
+  int rc;
+
+  rc = ble_hs_id_infer_auto(0, &own_addr_type);
+  if (rc != 0) {
+    ESP_LOGE(TAG, "ble_hs_id_infer_auto failed: %d", rc);
+    return;
+  }
+
+  uint8_t addr_val[6] = {0};
+  ble_hs_id_copy_addr(own_addr_type, addr_val, NULL);
+  ESP_LOGI(TAG, "device address: %02x:%02x:%02x:%02x:%02x:%02x", addr_val[5],
+           addr_val[4], addr_val[3], addr_val[2], addr_val[1], addr_val[0]);
+
+  ble_advertise();
+}
+
+static void ble_on_reset(int reason) {
+  ESP_LOGE(TAG, "nimble reset; reason=%d", reason);
+}
+
+static void ble_host_task(void *param) {
+  (void)param;
+  ESP_LOGI(TAG, "nimble host task started");
+  nimble_port_run();
+  nimble_port_freertos_deinit();
+}
+
+esp_err_t init_ble_host(QueueHandle_t cmd_queue) {
+  esp_err_t ret;
+
+  host_transport_set_cmd_queue(cmd_queue);
+  host_transport_set_tx(ble_host_tx);
+
+  /* NVS may already be init via pod_settings; ignore ALREADY_INIT. */
+  ret = nvs_flash_init();
+  if (ret == ESP_ERR_NVS_NO_FREE_PAGES ||
+      ret == ESP_ERR_NVS_NEW_VERSION_FOUND) {
+    ESP_ERROR_CHECK(nvs_flash_erase());
+    ret = nvs_flash_init();
+  }
+  if (ret != ESP_OK && ret != ESP_ERR_INVALID_STATE) {
+    ESP_LOGE(TAG, "nvs_flash_init failed: %s", esp_err_to_name(ret));
+    return ret;
+  }
+
+  const esp_timer_create_args_t tune_args = {
+      .callback = &ble_conn_tune_timer_cb,
+      .name = "ble_conn_tune",
+  };
+  ESP_ERROR_CHECK(esp_timer_create(&tune_args, &conn_tune_timer));
+
+  ret = nimble_port_init();
+  if (ret != ESP_OK) {
+    ESP_LOGE(TAG, "nimble_port_init failed: %s", esp_err_to_name(ret));
+    return ret;
+  }
+
+  ble_hs_cfg.sync_cb = ble_on_sync;
+  ble_hs_cfg.reset_cb = ble_on_reset;
+
+  int rc = gatt_svr_init();
+  if (rc != 0) {
+    ESP_LOGE(TAG, "gatt_svr_init failed: %d", rc);
+    return ESP_FAIL;
+  }
+
+  rc = ble_svc_gap_device_name_set(DEVICE_NAME);
+  if (rc != 0) {
+    ESP_LOGE(TAG, "device name set failed: %d", rc);
+    return ESP_FAIL;
+  }
+
+  rc = ble_att_set_preferred_mtu(247);
+  if (rc != 0) {
+    ESP_LOGW(TAG, "preferred MTU set failed: %d", rc);
+  }
+
+  nimble_port_freertos_init(ble_host_task);
+  ESP_LOGI(TAG, "BLE host transport started");
+  return ESP_OK;
+}

main/ble_host.h

@@ -0,0 +1,22 @@
+#ifndef BLE_HOST_H
+#define BLE_HOST_H
+
+#include "esp_err.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/queue.h"
+#include <stddef.h>
+#include <stdint.h>
+
+/** Start NimBLE host transport (Master only). Uses same framing as UART. */
+esp_err_t init_ble_host(QueueHandle_t cmd_queue);
+
+/** True when a central is connected and CCCD notify is enabled. */
+bool ble_host_ready(void);
+
+/** Negotiated ATT MTU (default 23 until exchange). */
+uint16_t ble_host_att_mtu(void);
+
+/** Max notify/write payload bytes (ATT MTU - 3). */
+uint16_t ble_host_max_payload(void);
+
+#endif

main/ble_stream.c

@@ -0,0 +1,201 @@
+#include "ble_stream.h"
+#include "app_config.h"
+#include "ble_host.h"
+#include "client_registry.h"
+#include "esp_log.h"
+#include "esp_timer.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "pb_encode.h"
+#include "uart.h"
+#include "uart_cmd.h"
+#include "uart_messages.pb.h"
+#include <string.h>
+
+static const char *TAG = "[BLE_STREAM]";
+
+#define BLE_STREAM_PERIOD_MIN_MS 8u
+#define BLE_STREAM_PERIOD_MAX_MS 16u
+#define BLE_STREAM_PERIOD_DEFAULT_MS 16u
+
+static uint32_t s_period_ms = BLE_STREAM_PERIOD_DEFAULT_MS;
+static TaskHandle_t s_task;
+static volatile bool s_running;
+
+static bool tap_notify_any(const client_info_t *client) {
+  return client != NULL &&
+         (client->tap_notify_single || client->tap_notify_double ||
+          client->tap_notify_triple);
+}
+
+static alox_TapKind tap_kind_from_registry(uint32_t kind) {
+  switch (kind) {
+  case 1:
+    return alox_TapKind_TAP_SINGLE;
+  case 2:
+    return alox_TapKind_TAP_DOUBLE;
+  case 3:
+    return alox_TapKind_TAP_TRIPLE;
+  default:
+    return alox_TapKind_TAP_NONE;
+  }
+}
+
+static void fill_clients(alox_BleStreamTick *tick) {
+  tick->clients_count = 0;
+  size_t count = client_registry_count();
+  for (size_t i = 0; i < count; i++) {
+    const client_info_t *client = client_registry_at(i);
+    if (client == NULL) {
+      continue;
+    }
+    const bool want_accel = client->accel_stream_enabled;
+    const bool want_tap = tap_notify_any(client);
+    if (!want_accel && !want_tap) {
+      continue;
+    }
+    if (tick->clients_count >=
+        sizeof(tick->clients) / sizeof(tick->clients[0])) {
+      break;
+    }
+
+    alox_CacheClientStatus *entry = &tick->clients[tick->clients_count++];
+    entry->client_id = client->id;
+    entry->has_accel = false;
+    entry->has_tap = false;
+
+    if (want_accel) {
+      entry->has_accel = true;
+      entry->accel.valid = client->accel_valid;
+      if (client->accel_valid) {
+        entry->accel.x = client->accel_x;
+        entry->accel.y = client->accel_y;
+        entry->accel.z = client->accel_z;
+        entry->accel.age_ms =
+            client_registry_ms_since(client->accel_updated_at);
+      }
+    }
+
+    if (want_tap) {
+      uint32_t kind = 0;
+      uint32_t age_ms = 0;
+      if (client_registry_take_tap(client->id, &kind, &age_ms)) {
+        entry->has_tap = true;
+        entry->tap.kind = tap_kind_from_registry(kind);
+        entry->tap.age_ms = age_ms;
+      }
+    }
+  }
+}
+
+static bool any_accel_stream(void) {
+  size_t count = client_registry_count();
+  for (size_t i = 0; i < count; i++) {
+    const client_info_t *client = client_registry_at(i);
+    if (client != NULL && client->accel_stream_enabled) {
+      return true;
+    }
+  }
+  return false;
+}
+
+static esp_err_t send_tick_truncated(alox_UartMessage *msg) {
+  uint8_t pb_buf[MAX_PAYLOAD_SIZE];
+  pb_ostream_t stream = pb_ostream_from_buffer(pb_buf, sizeof(pb_buf));
+
+  while (true) {
+    stream = pb_ostream_from_buffer(pb_buf, sizeof(pb_buf));
+    if (!pb_encode(&stream, alox_UartMessage_fields, msg)) {
+      return ESP_FAIL;
+    }
+
+    size_t payload_len = stream.bytes_written + 1;
+    uint16_t max_pay = ble_host_max_payload();
+    /* Framed size = payload + 4; notify must fit ATT MTU-3. */
+    size_t frame_len = payload_len + 4;
+    if (payload_len <= MAX_PAYLOAD_SIZE && frame_len <= max_pay) {
+      uint8_t payload[MAX_PAYLOAD_SIZE];
+      payload[0] = (uint8_t)msg->type;
+      memcpy(&payload[1], pb_buf, stream.bytes_written);
+      return uart_send_framed(payload, payload_len);
+    }
+
+    if (msg->payload.ble_stream_tick.clients_count == 0) {
+      ESP_LOGW(TAG, "tick too large even with 0 clients (need %u max %u)",
+               (unsigned)frame_len, (unsigned)max_pay);
+      return ESP_ERR_NO_MEM;
+    }
+
+    msg->payload.ble_stream_tick.clients_count--;
+    ESP_LOGW(TAG, "truncating tick clients to %u for MTU",
+             (unsigned)msg->payload.ble_stream_tick.clients_count);
+  }
+}
+
+static void ble_stream_task(void *param) {
+  (void)param;
+  ESP_LOGI(TAG, "BLE stream task started period_ms=%lu",
+           (unsigned long)s_period_ms);
+
+  while (s_running) {
+    uint32_t period = s_period_ms;
+    if (period < BLE_STREAM_PERIOD_MIN_MS) {
+      period = BLE_STREAM_PERIOD_MIN_MS;
+    }
+    if (period > BLE_STREAM_PERIOD_MAX_MS) {
+      period = BLE_STREAM_PERIOD_MAX_MS;
+    }
+
+    if (ble_host_ready() && any_accel_stream()) {
+      alox_UartMessage msg = alox_UartMessage_init_zero;
+      uart_cmd_init_response(&msg, alox_MessageType_BLE_STREAM_TICK,
+                             alox_UartMessage_ble_stream_tick_tag);
+      msg.payload.ble_stream_tick.esp_timestamp_us =
+          (uint64_t)esp_timer_get_time();
+      msg.payload.ble_stream_tick.period_ms = period;
+      fill_clients(&msg.payload.ble_stream_tick);
+
+      esp_err_t err = send_tick_truncated(&msg);
+      if (err != ESP_OK) {
+        ESP_LOGW(TAG, "tick send failed: %s", esp_err_to_name(err));
+      }
+    }
+
+    vTaskDelay(pdMS_TO_TICKS(period));
+  }
+
+  s_task = NULL;
+  vTaskDelete(NULL);
+}
+
+void ble_stream_set_period_ms(uint32_t period_ms) {
+  if (period_ms == 0) {
+    period_ms = BLE_STREAM_PERIOD_DEFAULT_MS;
+  }
+  if (period_ms < BLE_STREAM_PERIOD_MIN_MS) {
+    period_ms = BLE_STREAM_PERIOD_MIN_MS;
+  }
+  if (period_ms > BLE_STREAM_PERIOD_MAX_MS) {
+    period_ms = BLE_STREAM_PERIOD_MAX_MS;
+  }
+  s_period_ms = period_ms;
+}
+
+uint32_t ble_stream_period_ms(void) { return s_period_ms; }
+
+void ble_stream_update(void) {
+  const app_config_t *cfg = app_config_get();
+  bool want = cfg != NULL && cfg->host_ble && any_accel_stream();
+
+  if (want && !s_running) {
+    s_running = true;
+    if (xTaskCreate(ble_stream_task, "ble_stream", 4096, NULL, 5, &s_task) !=
+        pdPASS) {
+      s_running = false;
+      s_task = NULL;
+      ESP_LOGE(TAG, "failed to create ble_stream task");
+    }
+  } else if (!want && s_running) {
+    s_running = false;
+  }
+}

main/ble_stream.h

@@ -0,0 +1,18 @@
+#ifndef BLE_STREAM_H
+#define BLE_STREAM_H
+
+#include <stdbool.h>
+#include <stdint.h>
+
+/** Clamp and store BLE push period (8–16 ms). */
+void ble_stream_set_period_ms(uint32_t period_ms);
+
+uint32_t ble_stream_period_ms(void);
+
+/**
+ * Re-evaluate whether the BLE push task should run (host_ble + any accel
+ * stream enabled). Safe to call from accel-stream handlers.
+ */
+void ble_stream_update(void);
+
+#endif

main/cmd/cmd_accel_stream.c

@@ -1,5 +1,6 @@
 #include "client_registry.h"
 #include "cmd_accel_stream.h"
+#include "ble_stream.h"
 #include "esp_log.h"
 #include "esp_now_comm.h"
 #include "uart_cmd.h"
@@ -50,6 +51,10 @@ static void handle_accel_stream(const uint8_t *data, size_t len) {
   }
 
   if (req.write) {
+    if (req.period_ms != 0) {
+      ble_stream_set_period_ms(req.period_ms);
+    }
+
     if (req.all_clients) {
       size_t n = client_registry_set_accel_stream_all(req.enable);
       uint32_t sent = 0;
@@ -65,8 +70,10 @@ static void handle_accel_stream(const uint8_t *data, size_t len) {
         }
       }
 
-      ESP_LOGI(TAG, "accel stream %s for %u/%u slaves",
-               req.enable ? "on" : "off", (unsigned)sent, (unsigned)n);
+      ESP_LOGI(TAG, "accel stream %s for %u/%u slaves period_ms=%lu",
+               req.enable ? "on" : "off", (unsigned)sent, (unsigned)n,
+               (unsigned long)ble_stream_period_ms());
+      ble_stream_update();
       reply(req.enable, 0, sent > 0, sent);
       return;
     }
@@ -85,6 +92,7 @@ static void handle_accel_stream(const uint8_t *data, size_t len) {
     }
 
     esp_err_t err = push_stream_to_slave(client, req.enable);
+    ble_stream_update();
     reply(req.enable, req.client_id, err == ESP_OK, err == ESP_OK ? 1u : 0u);
     return;
   }

main/cmd/cmd_ota.c

@@ -1,4 +1,5 @@
 #include "cmd_ota.h"
+#include "app_config.h"
 #include "led_ring.h"
 #include "ota_espnow.h"
 #include "ota_uart.h"
@@ -103,10 +104,24 @@ static void ota_prepare_task(void *param) {
   vTaskDelete(NULL);
 }
 
+static bool ota_host_is_uart(void) {
+  const app_config_t *cfg = app_config_get();
+  if (cfg != NULL && cfg->host_ble) {
+    ESP_LOGW(TAG, "OTA requires UART host (DIP8=0); BLE host active");
+    return false;
+  }
+  return true;
+}
+
 static void handle_ota_start(const uint8_t *data, size_t len) {
   alox_UartMessage uart_msg;
   alox_OtaStartPayload req = alox_OtaStartPayload_init_zero;
 
+  if (!ota_host_is_uart()) {
+    send_ota_failed(20);
+    return;
+  }
+
   if (uart_cmd_decode(data, len, &uart_msg) != ESP_OK) {
     send_ota_failed( 2);
     return;
@@ -334,6 +349,10 @@ static void ota_start_espnow_task(void *param) {
 }
 
 static void handle_ota_start_espnow(const uint8_t *data, size_t len) {
+  if (!ota_host_is_uart()) {
+    send_ota_failed(20);
+    return;
+  }
   (void)data;
   (void)len;
 

main/esp_now_master.c

@@ -435,11 +435,13 @@ static void handle_accel_sample(const uint8_t mac[CLIENT_MAC_LEN],
   esp_err_t err = client_registry_update_accel(
       mac, sample->slave_id, (int16_t)sample->x, (int16_t)sample->y,
       (int16_t)sample->z);
-  if (err == ESP_ERR_NOT_FOUND) {
+  if (err == ESP_ERR_NOT_FOUND || err == ESP_ERR_INVALID_STATE) {
+    // Unknown MAC, or stream already off (in-flight samples after disable).
     return;
   }
   if (err != ESP_OK) {
-    ESP_LOGW(TAG, "accel sample id mismatch from %02x:…:%02x", mac[0], mac[5]);
+    ESP_LOGW(TAG, "accel sample id mismatch from %02x:…:%02x (slave_id=%lu)",
+             mac[0], mac[5], (unsigned long)sample->slave_id);
   }
 }
 

main/host_transport.c

@@ -0,0 +1,97 @@
+#include "host_transport.h"
+#include "cmd_handler.h"
+#include "esp_log.h"
+#include "uart.h"
+#include <stdlib.h>
+#include <string.h>
+
+static const char *TAG = "[HOST]";
+
+static host_tx_fn_t s_tx_fn;
+static QueueHandle_t s_cmd_queue;
+static uart_packet_t s_rx_packet = {.state = STATE_START};
+static TickType_t s_last_byte_ticks;
+static const TickType_t s_rx_timeout_ticks = pdMS_TO_TICKS(50);
+
+void host_transport_set_tx(host_tx_fn_t tx_fn) { s_tx_fn = tx_fn; }
+
+void host_transport_set_cmd_queue(QueueHandle_t cmd_queue) {
+  s_cmd_queue = cmd_queue;
+}
+
+QueueHandle_t host_transport_cmd_queue(void) { return s_cmd_queue; }
+
+bool host_enqueue_packet(const uint8_t *payload, uint8_t len) {
+  if (s_cmd_queue == NULL || payload == NULL || len == 0) {
+    return false;
+  }
+
+  generic_msg_t msg = {
+      .msg_id = payload[0],
+      .len = len > 1 ? (size_t)(len - 1) : 0,
+      .payload = NULL,
+  };
+
+  if (msg.len > 0) {
+    msg.payload = malloc(msg.len);
+    if (msg.payload == NULL) {
+      ESP_LOGE(TAG, "failed to allocate command payload");
+      return false;
+    }
+    memcpy(msg.payload, &payload[1], msg.len);
+  }
+
+  if (xQueueSend(s_cmd_queue, &msg, pdMS_TO_TICKS(500)) != pdPASS) {
+    free(msg.payload);
+    ESP_LOGW(TAG, "command queue full (cmd 0x%02x)", (unsigned)msg.msg_id);
+    return false;
+  }
+  return true;
+}
+
+esp_err_t host_send_framed(const uint8_t *payload, size_t len) {
+  if (payload == NULL || len == 0 || len > MAX_PAYLOAD_SIZE) {
+    return ESP_ERR_INVALID_ARG;
+  }
+  if (s_tx_fn == NULL) {
+    return ESP_ERR_INVALID_STATE;
+  }
+
+  uint8_t checksum = 0;
+  for (size_t i = 0; i < len; i++) {
+    checksum ^= payload[i];
+  }
+
+  uint8_t frame[4 + MAX_PAYLOAD_SIZE];
+  size_t pos = 0;
+  frame[pos++] = START_MARKER;
+  frame[pos++] = (uint8_t)len;
+  memcpy(&frame[pos], payload, len);
+  pos += len;
+  frame[pos++] = checksum;
+  frame[pos++] = STOP_MARKER;
+
+  return s_tx_fn(frame, pos);
+}
+
+void host_rx_bytes(const uint8_t *data, size_t len) {
+  if (data == NULL || len == 0) {
+    return;
+  }
+
+  TickType_t now = xTaskGetTickCount();
+  if (s_rx_packet.state != STATE_START &&
+      (now - s_last_byte_ticks) > s_rx_timeout_ticks) {
+    s_rx_packet.state = STATE_START;
+  }
+
+  for (size_t i = 0; i < len; i++) {
+    if (parse_uart_byte(data[i], &s_rx_packet)) {
+      ESP_LOGI(TAG, "received message cmd=0x%02x len=%u",
+               s_rx_packet.len > 0 ? s_rx_packet.payload[0] : 0,
+               (unsigned)s_rx_packet.len);
+      host_enqueue_packet(s_rx_packet.payload, s_rx_packet.len);
+    }
+  }
+  s_last_byte_ticks = now;
+}

main/host_transport.h

@@ -0,0 +1,36 @@
+#ifndef HOST_TRANSPORT_H
+#define HOST_TRANSPORT_H
+
+#include "esp_err.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/queue.h"
+#include <stddef.h>
+#include <stdint.h>
+
+/** TX callback: send a complete framed packet (0xAA … 0xCC). */
+typedef esp_err_t (*host_tx_fn_t)(const uint8_t *frame, size_t frame_len);
+
+/** Set the active host TX backend (UART write or BLE notify). */
+void host_transport_set_tx(host_tx_fn_t tx_fn);
+
+/** Bind the shared cmd_queue used by uart_enqueue_packet / host RX. */
+void host_transport_set_cmd_queue(QueueHandle_t cmd_queue);
+
+QueueHandle_t host_transport_cmd_queue(void);
+
+/**
+ * Build AA|len|payload|xor|CC and send via the registered TX backend.
+ * Same semantics as uart_send_framed.
+ */
+esp_err_t host_send_framed(const uint8_t *payload, size_t len);
+
+/**
+ * Feed raw host RX bytes into the shared frame parser and enqueue complete
+ * packets onto the cmd_queue.
+ */
+void host_rx_bytes(const uint8_t *data, size_t len);
+
+/** Enqueue a completed uart_packet_t (payload[0]=msg type). */
+bool host_enqueue_packet(const uint8_t *payload, uint8_t len);
+
+#endif

main/powerpod.c

@@ -32,8 +32,10 @@
 #include "led_ring.h"
 #include "pod_settings.h"
 #include "uart.h"
+#include "ble_host.h"
 #include "battery_uv.h"
 #include <stdint.h>
+#include <string.h>
 
 enum MASTER_STATES {
   MSTATE_INIT,
@@ -94,7 +96,8 @@ void app_main(void) {
   gpio_reset_pin(DIP_MASTER);
   gpio_set_direction(DIP_MASTER, GPIO_MODE_INPUT);
   uint8_t master = gpio_get_level(DIP_MASTER) ? 0 : 1;
-  uint8_t network = 0;
+  uint8_t network = 1;
+  bool host_ble = false;
 
   esp_err_t err;
 
@@ -137,12 +140,20 @@ void app_main(void) {
                                       -1);
     if (err != ESP_OK) {
       ESP_LOGI(TAG, "Could not read IO Expander input %d", err);
+    } else {
+      /* High nibble physically reversed on PCB; DIP1..8 after reverse+invert. */
+      uint8_t bits = (uint8_t)(~reverse_high_nibble_lut(read_val));
+      /* DIP8 (bit7) = host transport: 1 = BLE, 0 = UART */
+      host_ble = (bits & 0x80u) != 0;
+      uint8_t net_bits = (uint8_t)(bits & 0x7Fu);
+      if (net_bits == 0 || (net_bits & (net_bits - 1u)) != 0) {
+        ESP_LOGW(TAG, "invalid network DIP one-hot=0x%02x; fallback network=1",
+                 net_bits);
+        network = 1;
+      } else {
+        network = (uint8_t)(__builtin_ctz(net_bits) + 1); /* 1..7 */
+      }
     }
-    // Build NetworkNumber because Pin 5-8 are reversed
-    network = reverse_high_nibble_lut(read_val);
-    network = ~network; // reverse bits
-    network = __builtin_ctz(network) +
-              1; // map network to 0-8, 0 is not a valid network
   }
 
   if (bus_handle != NULL) {
@@ -167,6 +178,7 @@ void app_main(void) {
 
   app_config.master = (master != 0);
   app_config.network = network;
+  app_config.host_ble = host_ble;
   if (running != NULL) {
     memcpy(app_config.running_partition, running->label,
            sizeof(app_config.running_partition));
@@ -177,6 +189,8 @@ void app_main(void) {
   ESP_LOGI(TAG, "RUNNING CONFIG:");
   ESP_LOGI(TAG, "Master:            %d", app_config.master);
   ESP_LOGI(TAG, "Network:           %d", app_config.network);
+  ESP_LOGI(TAG, "Host:              %s (DIP8; reboot to switch)",
+           app_config.host_ble ? "BLE" : "UART");
   ESP_LOGI(TAG, "Running Partition: %s (OTA slot %d)",
            app_config.running_partition, ota_slot);
 
@@ -193,7 +207,14 @@ void app_main(void) {
   if (app_config.master) {
     cmd_queue = xQueueCreate(64, sizeof(generic_msg_t));
     init_cmdHandler(cmd_queue);
-    init_uart(cmd_queue);
+    if (app_config.host_ble) {
+      err = init_ble_host(cmd_queue);
+      if (err != ESP_OK) {
+        ESP_LOGE(TAG, "BLE host init failed: %s", esp_err_to_name(err));
+      }
+    } else {
+      init_uart(cmd_queue);
+    }
     cmd_version_register();
     cmd_client_info_register();
     cmd_accel_deadzone_register();

main/proto/uart_messages.pb.c

@@ -81,6 +81,9 @@ PB_BIND(alox_CacheClientStatus, alox_CacheClientStatus, AUTO)
 PB_BIND(alox_CacheStatusResponse, alox_CacheStatusResponse, 2)
 
 
+PB_BIND(alox_BleStreamTick, alox_BleStreamTick, 2)
+
+
 PB_BIND(alox_EspNowUnicastTestRequest, alox_EspNowUnicastTestRequest, AUTO)
 
 

main/proto/uart_messages.pb.h

@@ -38,7 +38,9 @@ typedef enum _alox_MessageType {
     /* * Host → master: get/set ESP-IDF log level for tag "*" (global). */
     alox_MessageType_SET_LOG_LEVEL = 31,
     /* * Host → master: get/set BMA456H multitap detection parameters. */
-    alox_MessageType_TAP_CONFIG = 32
+    alox_MessageType_TAP_CONFIG = 32,
+    /* * Master → host (BLE only): periodic pushed cache snapshot with ESP timestamp. */
+    alox_MessageType_BLE_STREAM_TICK = 33
 } alox_MessageType;
 
 typedef enum _alox_TapKind {
@@ -113,12 +115,14 @@ typedef struct _alox_AccelDeadzoneResponse {
 } alox_AccelDeadzoneResponse;
 
 /* Host → master: enable/disable slave accel ESP-NOW stream (~16 ms per slave).
- write=false: read; write=true: apply. client_id 0 invalid for write (use >0 or all_clients). */
+ write=false: read; write=true: apply. client_id 0 invalid for write (use >0 or all_clients).
+ period_ms (8–16): BLE host push interval for BleStreamTick; ignored on UART (default 16). */
 typedef struct _alox_AccelStreamRequest {
     bool write;
     bool enable;
     uint32_t client_id;
     bool all_clients;
+    uint32_t period_ms;
 } alox_AccelStreamRequest;
 
 typedef struct _alox_AccelStreamResponse {
@@ -231,6 +235,14 @@ typedef struct _alox_CacheStatusResponse {
     alox_CacheClientStatus clients[16];
 } alox_CacheStatusResponse;
 
+/* * Master → host over BLE notify: aggregated cache + ESP timer timestamp. */
+typedef struct _alox_BleStreamTick {
+    uint64_t esp_timestamp_us;
+    uint32_t period_ms;
+    pb_size_t clients_count;
+    alox_CacheClientStatus clients[16];
+} alox_BleStreamTick;
+
 typedef struct _alox_EspNowUnicastTestRequest {
     uint32_t client_id;
     uint32_t seq;
@@ -443,6 +455,7 @@ typedef struct _alox_UartMessage {
         alox_SetLogLevelResponse set_log_level_response;
         alox_TapConfigRequest tap_config_request;
         alox_TapConfigResponse tap_config_response;
+        alox_BleStreamTick ble_stream_tick;
     } payload;
 } alox_UartMessage;
 
@@ -453,8 +466,8 @@ extern "C" {
 
 /* Helper constants for enums */
 #define _alox_MessageType_MIN alox_MessageType_UNKNOWN
-#define _alox_MessageType_MAX alox_MessageType_TAP_CONFIG
-#define _alox_MessageType_ARRAYSIZE ((alox_MessageType)(alox_MessageType_TAP_CONFIG+1))
+#define _alox_MessageType_MAX alox_MessageType_BLE_STREAM_TICK
+#define _alox_MessageType_ARRAYSIZE ((alox_MessageType)(alox_MessageType_BLE_STREAM_TICK+1))
 
 #define _alox_TapKind_MIN alox_TapKind_TAP_NONE
 #define _alox_TapKind_MAX alox_TapKind_TAP_TRIPLE
@@ -508,6 +521,7 @@ extern "C" {
 
 
 
+
 
 
 /* Initializer values for message structs */
@@ -521,7 +535,7 @@ extern "C" {
 #define alox_ClientInputResponse_init_default    {{{NULL}, NULL}}
 #define alox_AccelDeadzoneRequest_init_default   {0, 0, 0, 0}
 #define alox_AccelDeadzoneResponse_init_default  {0, 0, 0, 0}
-#define alox_AccelStreamRequest_init_default     {0, 0, 0, 0}
+#define alox_AccelStreamRequest_init_default     {0, 0, 0, 0, 0}
 #define alox_AccelStreamResponse_init_default    {0, 0, 0, 0}
 #define alox_BatteryStatusRequest_init_default   {0, 0}
 #define alox_LipoReading_init_default            {0, 0}
@@ -536,6 +550,7 @@ extern "C" {
 #define alox_CacheClientTap_init_default         {_alox_TapKind_MIN, 0}
 #define alox_CacheClientStatus_init_default      {0, false, alox_CacheClientAccel_init_default, false, alox_CacheClientTap_init_default}
 #define alox_CacheStatusResponse_init_default    {0, {alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default}}
+#define alox_BleStreamTick_init_default          {0, 0, 0, {alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default, alox_CacheClientStatus_init_default}}
 #define alox_EspNowUnicastTestRequest_init_default {0, 0}
 #define alox_EspNowUnicastTestResponse_init_default {0, 0}
 #define alox_EspNowEchoPingRequest_init_default  {0, 0}
@@ -567,7 +582,7 @@ extern "C" {
 #define alox_ClientInputResponse_init_zero       {{{NULL}, NULL}}
 #define alox_AccelDeadzoneRequest_init_zero      {0, 0, 0, 0}
 #define alox_AccelDeadzoneResponse_init_zero     {0, 0, 0, 0}
-#define alox_AccelStreamRequest_init_zero        {0, 0, 0, 0}
+#define alox_AccelStreamRequest_init_zero        {0, 0, 0, 0, 0}
 #define alox_AccelStreamResponse_init_zero       {0, 0, 0, 0}
 #define alox_BatteryStatusRequest_init_zero      {0, 0}
 #define alox_LipoReading_init_zero               {0, 0}
@@ -582,6 +597,7 @@ extern "C" {
 #define alox_CacheClientTap_init_zero            {_alox_TapKind_MIN, 0}
 #define alox_CacheClientStatus_init_zero         {0, false, alox_CacheClientAccel_init_zero, false, alox_CacheClientTap_init_zero}
 #define alox_CacheStatusResponse_init_zero       {0, {alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero}}
+#define alox_BleStreamTick_init_zero             {0, 0, 0, {alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero, alox_CacheClientStatus_init_zero}}
 #define alox_EspNowUnicastTestRequest_init_zero  {0, 0}
 #define alox_EspNowUnicastTestResponse_init_zero {0, 0}
 #define alox_EspNowEchoPingRequest_init_zero     {0, 0}
@@ -638,6 +654,7 @@ extern "C" {
 #define alox_AccelStreamRequest_enable_tag       2
 #define alox_AccelStreamRequest_client_id_tag    3
 #define alox_AccelStreamRequest_all_clients_tag  4
+#define alox_AccelStreamRequest_period_ms_tag    5
 #define alox_AccelStreamResponse_enabled_tag     1
 #define alox_AccelStreamResponse_client_id_tag   2
 #define alox_AccelStreamResponse_success_tag     3
@@ -685,6 +702,9 @@ extern "C" {
 #define alox_CacheClientStatus_accel_tag         2
 #define alox_CacheClientStatus_tap_tag           3
 #define alox_CacheStatusResponse_clients_tag     1
+#define alox_BleStreamTick_esp_timestamp_us_tag  1
+#define alox_BleStreamTick_period_ms_tag         2
+#define alox_BleStreamTick_clients_tag           3
 #define alox_EspNowUnicastTestRequest_client_id_tag 1
 #define alox_EspNowUnicastTestRequest_seq_tag    2
 #define alox_EspNowUnicastTestResponse_success_tag 1
@@ -801,6 +821,7 @@ extern "C" {
 #define alox_UartMessage_set_log_level_response_tag 38
 #define alox_UartMessage_tap_config_request_tag  39
 #define alox_UartMessage_tap_config_response_tag 40
+#define alox_UartMessage_ble_stream_tick_tag     41
 
 /* Struct field encoding specification for nanopb */
 #define alox_UartMessage_FIELDLIST(X, a) \
@@ -839,7 +860,8 @@ X(a, STATIC,   ONEOF,    MESSAGE,  (payload,espnow_echo_ping_response,payload.es
 X(a, STATIC,   ONEOF,    MESSAGE,  (payload,set_log_level_request,payload.set_log_level_request),  37) \
 X(a, STATIC,   ONEOF,    MESSAGE,  (payload,set_log_level_response,payload.set_log_level_response),  38) \
 X(a, STATIC,   ONEOF,    MESSAGE,  (payload,tap_config_request,payload.tap_config_request),  39) \
-X(a, STATIC,   ONEOF,    MESSAGE,  (payload,tap_config_response,payload.tap_config_response),  40)
+X(a, STATIC,   ONEOF,    MESSAGE,  (payload,tap_config_response,payload.tap_config_response),  40) \
+X(a, STATIC,   ONEOF,    MESSAGE,  (payload,ble_stream_tick,payload.ble_stream_tick),  41)
 #define alox_UartMessage_CALLBACK NULL
 #define alox_UartMessage_DEFAULT NULL
 #define alox_UartMessage_payload_ack_payload_MSGTYPE alox_Ack
@@ -877,6 +899,7 @@ X(a, STATIC,   ONEOF,    MESSAGE,  (payload,tap_config_response,payload.tap_conf
 #define alox_UartMessage_payload_set_log_level_response_MSGTYPE alox_SetLogLevelResponse
 #define alox_UartMessage_payload_tap_config_request_MSGTYPE alox_TapConfigRequest
 #define alox_UartMessage_payload_tap_config_response_MSGTYPE alox_TapConfigResponse
+#define alox_UartMessage_payload_ble_stream_tick_MSGTYPE alox_BleStreamTick
 
 #define alox_Ack_FIELDLIST(X, a) \
 
@@ -950,7 +973,8 @@ X(a, STATIC,   SINGULAR, UINT32,   slaves_updated,    4)
 X(a, STATIC,   SINGULAR, BOOL,     write,             1) \
 X(a, STATIC,   SINGULAR, BOOL,     enable,            2) \
 X(a, STATIC,   SINGULAR, UINT32,   client_id,         3) \
-X(a, STATIC,   SINGULAR, BOOL,     all_clients,       4)
+X(a, STATIC,   SINGULAR, BOOL,     all_clients,       4) \
+X(a, STATIC,   SINGULAR, UINT32,   period_ms,         5)
 #define alox_AccelStreamRequest_CALLBACK NULL
 #define alox_AccelStreamRequest_DEFAULT NULL
 
@@ -1064,6 +1088,14 @@ X(a, STATIC,   REPEATED, MESSAGE,  clients,           1)
 #define alox_CacheStatusResponse_DEFAULT NULL
 #define alox_CacheStatusResponse_clients_MSGTYPE alox_CacheClientStatus
 
+#define alox_BleStreamTick_FIELDLIST(X, a) \
+X(a, STATIC,   SINGULAR, UINT64,   esp_timestamp_us,   1) \
+X(a, STATIC,   SINGULAR, UINT32,   period_ms,         2) \
+X(a, STATIC,   REPEATED, MESSAGE,  clients,           3)
+#define alox_BleStreamTick_CALLBACK NULL
+#define alox_BleStreamTick_DEFAULT NULL
+#define alox_BleStreamTick_clients_MSGTYPE alox_CacheClientStatus
+
 #define alox_EspNowUnicastTestRequest_FIELDLIST(X, a) \
 X(a, STATIC,   SINGULAR, UINT32,   client_id,         1) \
 X(a, STATIC,   SINGULAR, UINT32,   seq,               2)
@@ -1255,6 +1287,7 @@ extern const pb_msgdesc_t alox_CacheClientAccel_msg;
 extern const pb_msgdesc_t alox_CacheClientTap_msg;
 extern const pb_msgdesc_t alox_CacheClientStatus_msg;
 extern const pb_msgdesc_t alox_CacheStatusResponse_msg;
+extern const pb_msgdesc_t alox_BleStreamTick_msg;
 extern const pb_msgdesc_t alox_EspNowUnicastTestRequest_msg;
 extern const pb_msgdesc_t alox_EspNowUnicastTestResponse_msg;
 extern const pb_msgdesc_t alox_EspNowEchoPingRequest_msg;
@@ -1303,6 +1336,7 @@ extern const pb_msgdesc_t alox_OtaSlaveProgressResponse_msg;
 #define alox_CacheClientTap_fields &alox_CacheClientTap_msg
 #define alox_CacheClientStatus_fields &alox_CacheClientStatus_msg
 #define alox_CacheStatusResponse_fields &alox_CacheStatusResponse_msg
+#define alox_BleStreamTick_fields &alox_BleStreamTick_msg
 #define alox_EspNowUnicastTestRequest_fields &alox_EspNowUnicastTestRequest_msg
 #define alox_EspNowUnicastTestResponse_fields &alox_EspNowUnicastTestResponse_msg
 #define alox_EspNowEchoPingRequest_fields &alox_EspNowEchoPingRequest_msg
@@ -1332,16 +1366,17 @@ extern const pb_msgdesc_t alox_OtaSlaveProgressResponse_msg;
 /* alox_ClientInfo_size depends on runtime parameters */
 /* alox_ClientInfoResponse_size depends on runtime parameters */
 /* alox_ClientInputResponse_size depends on runtime parameters */
-#define ALOX_UART_MESSAGES_PB_H_MAX_SIZE         alox_CacheStatusResponse_size
+#define ALOX_UART_MESSAGES_PB_H_MAX_SIZE         alox_BleStreamTick_size
 #define alox_AccelDeadzoneRequest_size           16
 #define alox_AccelDeadzoneResponse_size          20
 #define alox_AccelSample_size                    32
-#define alox_AccelStreamRequest_size             12
+#define alox_AccelStreamRequest_size             18
 #define alox_AccelStreamResponse_size            16
 #define alox_Ack_size                            0
 #define alox_BatterySample_size                  32
 #define alox_BatteryStatusRequest_size           8
 #define alox_BatteryStatusResponse_size          580
+#define alox_BleStreamTick_size                  753
 #define alox_CacheClientAccel_size               26
 #define alox_CacheClientStatus_size              44
 #define alox_CacheClientTap_size                 8

main/proto/uart_messages.proto

@@ -35,6 +35,8 @@ enum MessageType {
   SET_LOG_LEVEL = 31;
   /** Host → master: get/set BMA456H multitap detection parameters. */
   TAP_CONFIG = 32;
+  /** Master → host (BLE only): periodic pushed cache snapshot with ESP timestamp. */
+  BLE_STREAM_TICK = 33;
 }
 
 message UartMessage {
@@ -75,6 +77,7 @@ message UartMessage {
     SetLogLevelResponse set_log_level_response = 38;
     TapConfigRequest tap_config_request = 39;
     TapConfigResponse tap_config_response = 40;
+    BleStreamTick ble_stream_tick = 41;
   }
 }
 
@@ -141,11 +144,13 @@ message AccelDeadzoneResponse {
 
 // Host → master: enable/disable slave accel ESP-NOW stream (~16 ms per slave).
 // write=false: read; write=true: apply. client_id 0 invalid for write (use >0 or all_clients).
+// period_ms (8–16): BLE host push interval for BleStreamTick; ignored on UART (default 16).
 message AccelStreamRequest {
   bool write = 1;
   bool enable = 2;
   uint32 client_id = 3;
   bool all_clients = 4;
+  uint32 period_ms = 5;
 }
 
 message AccelStreamResponse {
@@ -257,6 +262,13 @@ message CacheStatusResponse {
   repeated CacheClientStatus clients = 1 [(nanopb).max_count = 16];
 }
 
+/** Master → host over BLE notify: aggregated cache + ESP timer timestamp. */
+message BleStreamTick {
+  uint64 esp_timestamp_us = 1;
+  uint32 period_ms = 2;
+  repeated CacheClientStatus clients = 3 [(nanopb).max_count = 16];
+}
+
 message EspNowUnicastTestRequest {
   uint32 client_id = 1;
   uint32 seq = 2;

main/uart.c

@@ -4,46 +4,28 @@
 #include "esp_log.h"
 #include "freertos/idf_additions.h"
 #include "hal/uart_types.h"
+#include "host_transport.h"
 #include "uart.h"
 #include <stdbool.h>
 #include <stdlib.h>
 #include <string.h>
 
 static const char *TAG = "[UART]";
-static QueueHandle_t uart_cmd_queue;
 
-static bool uart_enqueue_packet(const uart_packet_t *packet) {
-  if (packet->len == 0) {
-    return false;
+static esp_err_t uart_host_tx(const uint8_t *frame, size_t frame_len) {
+  int written = uart_write_bytes(UART_NUM, frame, frame_len);
+  if (written < 0 || (size_t)written != frame_len) {
+    return ESP_FAIL;
   }
-
-  generic_msg_t msg = {
-      .msg_id = packet->payload[0],
-      .len = packet->len > 1 ? packet->len - 1 : 0,
-      .payload = NULL,
-  };
-
-  if (msg.len > 0) {
-    msg.payload = malloc(msg.len);
-    if (msg.payload == NULL) {
-      ESP_LOGE(TAG, "failed to allocate command payload");
-      return false;
-    }
-    memcpy(msg.payload, &packet->payload[1], msg.len);
-  }
-
-  if (xQueueSend(uart_cmd_queue, &msg, pdMS_TO_TICKS(500)) != pdPASS) {
-    free(msg.payload);
-    ESP_LOGW(TAG, "command queue full (cmd 0x%02x)", (unsigned)msg.msg_id);
-    return false;
-  }
-  return true;
+  return ESP_OK;
 }
 
 void init_uart(QueueHandle_t cmd_queue) {
   esp_err_t err;
 
-  uart_cmd_queue = cmd_queue;
+  host_transport_set_cmd_queue(cmd_queue);
+  host_transport_set_tx(uart_host_tx);
+
   uart_config_t uart_config = {
       .baud_rate = UART_BAUD_RATE,
       .data_bits = UART_DATA_8_BITS,
@@ -85,27 +67,10 @@ void uart_read_task(void *param) {
     return;
   }
 
-  int len = 0;
-  uart_packet_t packet = {.state = STATE_START};
-  TickType_t last_byte_time = xTaskGetTickCount();
-  const TickType_t timeout_ticks = pdMS_TO_TICKS(50);
-
   while (1) {
-    len = uart_read_bytes(UART_NUM, data, UART_BUF_SIZE, pdMS_TO_TICKS(20));
+    int len = uart_read_bytes(UART_NUM, data, UART_BUF_SIZE, pdMS_TO_TICKS(20));
     if (len > 0) {
-      for (int i = 0; i < len; ++i) {
-        if (parse_uart_byte(data[i], &packet)) {
-          ESP_LOGI(TAG, "received message cmd=0x%02x len=%u",
-                   packet.len > 0 ? packet.payload[0] : 0, (unsigned)packet.len);
-          uart_enqueue_packet(&packet);
-        }
-      }
-      last_byte_time = xTaskGetTickCount();
-    } else if (packet.state != STATE_START) {
-      TickType_t now = xTaskGetTickCount();
-      if ((now - last_byte_time) > timeout_ticks) {
-        packet.state = STATE_START;
-      }
+      host_rx_bytes(data, (size_t)len);
     }
   }
 }
@@ -156,27 +121,5 @@ bool parse_uart_byte(uint8_t byte, uart_packet_t *p) {
 }
 
 esp_err_t uart_send_framed(const uint8_t *payload, size_t len) {
-  if (payload == NULL || len == 0 || len > MAX_PAYLOAD_SIZE) {
-    return ESP_ERR_INVALID_ARG;
-  }
-
-  uint8_t checksum = 0;
-  for (size_t i = 0; i < len; i++) {
-    checksum ^= payload[i];
-  }
-
-  uint8_t frame[4 + MAX_PAYLOAD_SIZE];
-  size_t pos = 0;
-  frame[pos++] = START_MARKER;
-  frame[pos++] = (uint8_t)len;
-  memcpy(&frame[pos], payload, len);
-  pos += len;
-  frame[pos++] = checksum;
-  frame[pos++] = STOP_MARKER;
-
-  int written = uart_write_bytes(UART_NUM, frame, pos);
-  if (written < 0 || (size_t)written != pos) {
-    return ESP_FAIL;
-  }
-  return ESP_OK;
+  return host_send_framed(payload, len);
 }

sdkconfig

@@ -650,16 +650,296 @@ CONFIG_APPTRACE_LOCK_ENABLE=y
 #
 # Bluetooth
 #
-# CONFIG_BT_ENABLED is not set
+CONFIG_BT_ENABLED=y
+# CONFIG_BT_BLUEDROID_ENABLED is not set
+CONFIG_BT_NIMBLE_ENABLED=y
+# CONFIG_BT_CONTROLLER_ONLY is not set
+CONFIG_BT_CONTROLLER_ENABLED=y
+# CONFIG_BT_CONTROLLER_DISABLED is not set
+
+#
+# NimBLE Options
+#
+CONFIG_BT_NIMBLE_MEM_ALLOC_MODE_INTERNAL=y
+# CONFIG_BT_NIMBLE_MEM_ALLOC_MODE_DEFAULT is not set
+# CONFIG_BT_NIMBLE_LOG_LEVEL_NONE is not set
+# CONFIG_BT_NIMBLE_LOG_LEVEL_ERROR is not set
+# CONFIG_BT_NIMBLE_LOG_LEVEL_WARNING is not set
+CONFIG_BT_NIMBLE_LOG_LEVEL_INFO=y
+# CONFIG_BT_NIMBLE_LOG_LEVEL_DEBUG is not set
+CONFIG_BT_NIMBLE_LOG_LEVEL=1
+CONFIG_BT_NIMBLE_MAX_CONNECTIONS=3
+CONFIG_BT_NIMBLE_MAX_BONDS=3
+CONFIG_BT_NIMBLE_MAX_CCCDS=8
+CONFIG_BT_NIMBLE_L2CAP_COC_MAX_NUM=0
+# CONFIG_BT_NIMBLE_PINNED_TO_CORE_0 is not set
+CONFIG_BT_NIMBLE_PINNED_TO_CORE_1=y
+CONFIG_BT_NIMBLE_PINNED_TO_CORE=1
+CONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=4096
+CONFIG_BT_NIMBLE_ROLE_CENTRAL=y
+CONFIG_BT_NIMBLE_ROLE_PERIPHERAL=y
+CONFIG_BT_NIMBLE_ROLE_BROADCASTER=y
+CONFIG_BT_NIMBLE_ROLE_OBSERVER=y
+CONFIG_BT_NIMBLE_GATT_CLIENT=y
+CONFIG_BT_NIMBLE_GATT_SERVER=y
+# CONFIG_BT_NIMBLE_NVS_PERSIST is not set
+# CONFIG_BT_NIMBLE_SMP_ID_RESET is not set
+CONFIG_BT_NIMBLE_SECURITY_ENABLE=y
+CONFIG_BT_NIMBLE_SM_LEGACY=y
+CONFIG_BT_NIMBLE_SM_SC=y
+# CONFIG_BT_NIMBLE_SM_SC_DEBUG_KEYS is not set
+CONFIG_BT_NIMBLE_LL_CFG_FEAT_LE_ENCRYPTION=y
+CONFIG_BT_NIMBLE_SM_LVL=0
+CONFIG_BT_NIMBLE_SM_SC_ONLY=0
+CONFIG_BT_NIMBLE_PRINT_ERR_NAME=y
+# CONFIG_BT_NIMBLE_DEBUG is not set
+# CONFIG_BT_NIMBLE_DYNAMIC_SERVICE is not set
+CONFIG_BT_NIMBLE_SVC_GAP_DEVICE_NAME="nimble"
+CONFIG_BT_NIMBLE_GAP_DEVICE_NAME_MAX_LEN=31
+CONFIG_BT_NIMBLE_ATT_PREFERRED_MTU=256
+CONFIG_BT_NIMBLE_ATT_MAX_PREP_ENTRIES=64
+CONFIG_BT_NIMBLE_SVC_GAP_APPEARANCE=0
+
+#
+# Memory Settings
+#
+CONFIG_BT_NIMBLE_MSYS_1_BLOCK_COUNT=12
+CONFIG_BT_NIMBLE_MSYS_1_BLOCK_SIZE=256
+CONFIG_BT_NIMBLE_MSYS_2_BLOCK_COUNT=24
+CONFIG_BT_NIMBLE_MSYS_2_BLOCK_SIZE=320
+CONFIG_BT_NIMBLE_TRANSPORT_ACL_FROM_LL_COUNT=24
+CONFIG_BT_NIMBLE_TRANSPORT_ACL_SIZE=255
+CONFIG_BT_NIMBLE_TRANSPORT_EVT_SIZE=70
+CONFIG_BT_NIMBLE_TRANSPORT_EVT_COUNT=30
+CONFIG_BT_NIMBLE_TRANSPORT_EVT_DISCARD_COUNT=8
+CONFIG_BT_NIMBLE_L2CAP_COC_SDU_BUFF_COUNT=1
+# end of Memory Settings
+
+CONFIG_BT_NIMBLE_GATT_MAX_PROCS=4
+# CONFIG_BT_NIMBLE_HS_FLOW_CTRL is not set
+CONFIG_BT_NIMBLE_RPA_TIMEOUT=900
+# CONFIG_BT_NIMBLE_MESH is not set
+CONFIG_BT_NIMBLE_CRYPTO_STACK_MBEDTLS=y
+CONFIG_BT_NIMBLE_HS_STOP_TIMEOUT_MS=2000
+CONFIG_BT_NIMBLE_ENABLE_CONN_REATTEMPT=y
+CONFIG_BT_NIMBLE_MAX_CONN_REATTEMPT=3
+# CONFIG_BT_NIMBLE_HANDLE_REPEAT_PAIRING_DELETION is not set
+CONFIG_BT_NIMBLE_50_FEATURE_SUPPORT=y
+CONFIG_BT_NIMBLE_LL_CFG_FEAT_LE_2M_PHY=y
+CONFIG_BT_NIMBLE_LL_CFG_FEAT_LE_CODED_PHY=y
+# CONFIG_BT_NIMBLE_EXT_ADV is not set
+CONFIG_BT_NIMBLE_EXT_SCAN=y
+CONFIG_BT_NIMBLE_ENABLE_PERIODIC_SYNC=y
+CONFIG_BT_NIMBLE_MAX_PERIODIC_SYNCS=0
+# CONFIG_BT_NIMBLE_GATT_CACHING is not set
+# CONFIG_BT_NIMBLE_INCL_SVC_DISCOVERY is not set
+CONFIG_BT_NIMBLE_WHITELIST_SIZE=12
+# CONFIG_BT_NIMBLE_TEST_THROUGHPUT_TEST is not set
+# CONFIG_BT_NIMBLE_BLUFI_ENABLE is not set
+CONFIG_BT_NIMBLE_USE_ESP_TIMER=y
+CONFIG_BT_NIMBLE_LEGACY_VHCI_ENABLE=y
+# CONFIG_BT_NIMBLE_BLE_GATT_BLOB_TRANSFER is not set
+
+#
+# BLE Services
+#
+CONFIG_BT_NIMBLE_PROX_SERVICE=y
+CONFIG_BT_NIMBLE_ANS_SERVICE=y
+CONFIG_BT_NIMBLE_CTS_SERVICE=y
+CONFIG_BT_NIMBLE_HTP_SERVICE=y
+CONFIG_BT_NIMBLE_IPSS_SERVICE=y
+CONFIG_BT_NIMBLE_TPS_SERVICE=y
+CONFIG_BT_NIMBLE_IAS_SERVICE=y
+CONFIG_BT_NIMBLE_LLS_SERVICE=y
+CONFIG_BT_NIMBLE_SPS_SERVICE=y
+CONFIG_BT_NIMBLE_HR_SERVICE=y
+# CONFIG_BT_NIMBLE_HID_SERVICE is not set
+CONFIG_BT_NIMBLE_BAS_SERVICE=y
+# CONFIG_BT_NIMBLE_SVC_BAS_BATTERY_LEVEL_NOTIFY is not set
+CONFIG_BT_NIMBLE_DIS_SERVICE=y
+# CONFIG_BT_NIMBLE_SVC_DIS_MANUFACTURER_NAME is not set
+# CONFIG_BT_NIMBLE_SVC_DIS_SERIAL_NUMBER is not set
+# CONFIG_BT_NIMBLE_SVC_DIS_HARDWARE_REVISION is not set
+# CONFIG_BT_NIMBLE_SVC_DIS_FIRMWARE_REVISION is not set
+# CONFIG_BT_NIMBLE_SVC_DIS_SOFTWARE_REVISION is not set
+# CONFIG_BT_NIMBLE_SVC_DIS_SYSTEM_ID is not set
+# CONFIG_BT_NIMBLE_SVC_DIS_PNP_ID is not set
+# CONFIG_BT_NIMBLE_SVC_DIS_INCLUDED is not set
+CONFIG_BT_NIMBLE_GAP_SERVICE=y
+
+#
+# GAP Appearance write permissions
+#
+# CONFIG_BT_NIMBLE_SVC_GAP_APPEAR_WRITE is not set
+CONFIG_BT_NIMBLE_SVC_GAP_APPEAR_WRITE_PERM=0
+CONFIG_BT_NIMBLE_SVC_GAP_APPEAR_WRITE_PERM_ENC=0
+CONFIG_BT_NIMBLE_SVC_GAP_APPEAR_WRITE_PERM_ATHN=0
+CONFIG_BT_NIMBLE_SVC_GAP_APPEAR_WRITE_PERM_ATHR=0
+# end of GAP Appearance write permissions
+
+CONFIG_BT_NIMBLE_SVC_GAP_CAR_CHAR_NOT_SUPP=y
+# CONFIG_BT_NIMBLE_SVC_GAP_CAR_NOT_SUPP is not set
+# CONFIG_BT_NIMBLE_SVC_GAP_CAR_SUPP is not set
+CONFIG_BT_NIMBLE_SVC_GAP_CENT_ADDR_RESOLUTION=-1
+
+#
+# GAP device name write permissions
+#
+# CONFIG_BT_NIMBLE_SVC_GAP_NAME_WRITE is not set
+# end of GAP device name write permissions
+
+#
+# Peripheral Preferred Connection Parameters (PPCP) settings
+#
+CONFIG_BT_NIMBLE_SVC_GAP_PPCP_MAX_CONN_INTERVAL=0
+CONFIG_BT_NIMBLE_SVC_GAP_PPCP_MIN_CONN_INTERVAL=0
+CONFIG_BT_NIMBLE_SVC_GAP_PPCP_SLAVE_LATENCY=0
+CONFIG_BT_NIMBLE_SVC_GAP_PPCP_SUPERVISION_TMO=0
+# end of Peripheral Preferred Connection Parameters (PPCP) settings
+
+CONFIG_BT_NIMBLE_SVC_GAP_NAME_WRITE_PERM=0
+CONFIG_BT_NIMBLE_SVC_GAP_NAME_WRITE_PERM_ENC=0
+CONFIG_BT_NIMBLE_SVC_GAP_NAME_WRITE_PERM_AUTHEN=0
+CONFIG_BT_NIMBLE_SVC_GAP_NAME_WRITE_PERM_AUTHOR=0
+# CONFIG_BT_NIMBLE_SVC_GAP_GATT_SECURITY_LEVEL is not set
+# CONFIG_BT_NIMBLE_SVC_GAP_RPA_ONLY is not set
+# end of BLE Services
+
+# CONFIG_BT_NIMBLE_VS_SUPPORT is not set
+# CONFIG_BT_NIMBLE_ENC_ADV_DATA is not set
+# CONFIG_BT_NIMBLE_HIGH_DUTY_ADV_ITVL is not set
+# CONFIG_BT_NIMBLE_HOST_ALLOW_CONNECT_WITH_SCAN is not set
+# CONFIG_BT_NIMBLE_HOST_QUEUE_CONG_CHECK is not set
+# CONFIG_BT_NIMBLE_GATTC_PROC_PREEMPTION_PROTECT is not set
+# CONFIG_BT_NIMBLE_GATTC_AUTO_PAIR is not set
+
+#
+# Host-controller Transport
+#
+CONFIG_UART_HW_FLOWCTRL_DISABLE=y
+# CONFIG_UART_HW_FLOWCTRL_CTS_RTS is not set
+CONFIG_BT_NIMBLE_HCI_UART_FLOW_CTRL=0
+CONFIG_BT_NIMBLE_HCI_UART_RTS_PIN=19
+CONFIG_BT_NIMBLE_HCI_UART_CTS_PIN=23
+# end of Host-controller Transport
+
+CONFIG_BT_NIMBLE_EATT_CHAN_NUM=0
+# CONFIG_BT_NIMBLE_SUBRATE is not set
+# end of NimBLE Options
+
+#
+# Controller Options
+#
+CONFIG_BT_CTRL_MODE_EFF=1
+CONFIG_BT_CTRL_BLE_MAX_ACT=6
+CONFIG_BT_CTRL_BLE_MAX_ACT_EFF=6
+CONFIG_BT_CTRL_BLE_STATIC_ACL_TX_BUF_NB=0
+CONFIG_BT_CTRL_PINNED_TO_CORE_0=y
+# CONFIG_BT_CTRL_PINNED_TO_CORE_1 is not set
+CONFIG_BT_CTRL_PINNED_TO_CORE=0
+CONFIG_BT_CTRL_HCI_MODE_VHCI=y
+# CONFIG_BT_CTRL_HCI_MODE_UART_H4 is not set
+CONFIG_BT_CTRL_HCI_TL=1
+CONFIG_BT_CTRL_ADV_DUP_FILT_MAX=30
+CONFIG_BT_BLE_CCA_MODE_NONE=y
+# CONFIG_BT_BLE_CCA_MODE_HW is not set
+# CONFIG_BT_BLE_CCA_MODE_SW is not set
+CONFIG_BT_BLE_CCA_MODE=0
+CONFIG_BT_CTRL_HW_CCA_VAL=75
+CONFIG_BT_CTRL_HW_CCA_EFF=0
+CONFIG_BT_CTRL_CE_LENGTH_TYPE_ORIG=y
+# CONFIG_BT_CTRL_CE_LENGTH_TYPE_CE is not set
+# CONFIG_BT_CTRL_CE_LENGTH_TYPE_SD is not set
+CONFIG_BT_CTRL_CE_LENGTH_TYPE_EFF=0
+CONFIG_BT_CTRL_TX_ANTENNA_INDEX_0=y
+# CONFIG_BT_CTRL_TX_ANTENNA_INDEX_1 is not set
+CONFIG_BT_CTRL_TX_ANTENNA_INDEX_EFF=0
+CONFIG_BT_CTRL_RX_ANTENNA_INDEX_0=y
+# CONFIG_BT_CTRL_RX_ANTENNA_INDEX_1 is not set
+CONFIG_BT_CTRL_RX_ANTENNA_INDEX_EFF=0
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N24 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N21 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N18 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N15 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N12 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N9 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N6 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N3 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_N0 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P3 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P6 is not set
+CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P9=y
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P12 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P15 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P18 is not set
+# CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P20 is not set
+CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_EFF=11
+CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP=y
+CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM=100
+CONFIG_BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD=20
+CONFIG_BT_CTRL_BLE_SCAN_DUPL=y
+CONFIG_BT_CTRL_SCAN_DUPL_TYPE_DEVICE=y
+# CONFIG_BT_CTRL_SCAN_DUPL_TYPE_DATA is not set
+# CONFIG_BT_CTRL_SCAN_DUPL_TYPE_DATA_DEVICE is not set
+CONFIG_BT_CTRL_SCAN_DUPL_TYPE=0
+CONFIG_BT_CTRL_SCAN_DUPL_CACHE_SIZE=100
+CONFIG_BT_CTRL_DUPL_SCAN_CACHE_REFRESH_PERIOD=0
+# CONFIG_BT_CTRL_BLE_MESH_SCAN_DUPL_EN is not set
+# CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EN is not set
+CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_DIS=y
+CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EFF=0
+
+#
+# MODEM SLEEP Options
+#
+# CONFIG_BT_CTRL_MODEM_SLEEP is not set
+# end of MODEM SLEEP Options
+
+CONFIG_BT_CTRL_SLEEP_MODE_EFF=0
+CONFIG_BT_CTRL_SLEEP_CLOCK_EFF=0
+CONFIG_BT_CTRL_HCI_TL_EFF=1
+# CONFIG_BT_CTRL_AGC_RECORRECT_EN is not set
+# CONFIG_BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX is not set
+# CONFIG_BT_BLE_ADV_DATA_LENGTH_ZERO_AUX is not set
+CONFIG_BT_CTRL_CHAN_ASS_EN=y
+CONFIG_BT_CTRL_LE_PING_EN=y
+
+#
+# BLE disconnects when Instant Passed (0x28) occurs
+#
+# CONFIG_BT_CTRL_BLE_LLCP_CONN_UPDATE is not set
+# CONFIG_BT_CTRL_BLE_LLCP_CHAN_MAP_UPDATE is not set
+# CONFIG_BT_CTRL_BLE_LLCP_PHY_UPDATE is not set
+# end of BLE disconnects when Instant Passed (0x28) occurs
+
+# CONFIG_BT_CTRL_RUN_IN_FLASH_ONLY is not set
+CONFIG_BT_CTRL_DTM_ENABLE=y
+CONFIG_BT_CTRL_BLE_MASTER=y
+# CONFIG_BT_CTRL_BLE_TEST is not set
+CONFIG_BT_CTRL_BLE_SCAN=y
+CONFIG_BT_CTRL_BLE_SECURITY_ENABLE=y
+CONFIG_BT_CTRL_BLE_ADV=y
+# CONFIG_BT_CTRL_CHECK_CONNECT_IND_ACCESS_ADDRESS is not set
+
+#
+# Controller debug log Options (Experimental)
+#
+# end of Controller debug log Options (Experimental)
+# end of Controller Options
 
 #
 # Common Options
 #
+CONFIG_BT_ALARM_MAX_NUM=50
 # CONFIG_BT_BLE_LOG_SPI_OUT_ENABLED is not set
 # CONFIG_BT_BLE_LOG_UHCI_OUT_ENABLED is not set
 # end of Common Options
+
+# CONFIG_BT_HCI_LOG_DEBUG_EN is not set
 # end of Bluetooth
 
+# CONFIG_BLE_MESH is not set
+
 #
 # Console Library
 #
@@ -789,7 +1069,8 @@ CONFIG_ESP_TLS_DYN_BUF_STRATEGY_SUPPORTED=y
 # Wireless Coexistence
 #
 CONFIG_ESP_COEX_ENABLED=y
-# CONFIG_ESP_COEX_EXTERNAL_COEXIST_ENABLE is not set
+CONFIG_ESP_COEX_SW_COEXIST_ENABLE=y
+# CONFIG_ESP_COEX_POWER_MANAGEMENT is not set
 # CONFIG_ESP_COEX_GPIO_DEBUG is not set
 # end of Wireless Coexistence
 
@@ -2233,6 +2514,11 @@ CONFIG_WL_SECTOR_SIZE=4096
 #
 CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16
 CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30
+# CONFIG_WIFI_PROV_BLE_BONDING is not set
+CONFIG_WIFI_PROV_BLE_SEC_CONN=y
+# CONFIG_WIFI_PROV_BLE_FORCE_ENCRYPTION is not set
+# CONFIG_WIFI_PROV_BLE_NOTIFY is not set
+# CONFIG_WIFI_PROV_KEEP_BLE_ON_AFTER_PROV is not set
 CONFIG_WIFI_PROV_STA_ALL_CHANNEL_SCAN=y
 # CONFIG_WIFI_PROV_STA_FAST_SCAN is not set
 # end of Wi-Fi Provisioning Manager
@@ -2275,8 +2561,48 @@ CONFIG_STACK_CHECK_NONE=y
 # CONFIG_ESP32_APPTRACE_DEST_TRAX is not set
 CONFIG_ESP32_APPTRACE_DEST_NONE=y
 CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y
-# CONFIG_EXTERNAL_COEX_ENABLE is not set
-# CONFIG_ESP_WIFI_EXTERNAL_COEXIST_ENABLE is not set
+# CONFIG_BLUEDROID_ENABLED is not set
+CONFIG_NIMBLE_ENABLED=y
+CONFIG_NIMBLE_MEM_ALLOC_MODE_INTERNAL=y
+# CONFIG_NIMBLE_MEM_ALLOC_MODE_DEFAULT is not set
+CONFIG_NIMBLE_MAX_CONNECTIONS=3
+CONFIG_NIMBLE_MAX_BONDS=3
+CONFIG_NIMBLE_MAX_CCCDS=8
+CONFIG_NIMBLE_L2CAP_COC_MAX_NUM=0
+# CONFIG_NIMBLE_PINNED_TO_CORE_0 is not set
+CONFIG_NIMBLE_PINNED_TO_CORE_1=y
+CONFIG_NIMBLE_PINNED_TO_CORE=1
+CONFIG_NIMBLE_TASK_STACK_SIZE=4096
+CONFIG_BT_NIMBLE_TASK_STACK_SIZE=4096
+CONFIG_NIMBLE_ROLE_CENTRAL=y
+CONFIG_NIMBLE_ROLE_PERIPHERAL=y
+CONFIG_NIMBLE_ROLE_BROADCASTER=y
+CONFIG_NIMBLE_ROLE_OBSERVER=y
+# CONFIG_NIMBLE_NVS_PERSIST is not set
+CONFIG_NIMBLE_SM_LEGACY=y
+CONFIG_NIMBLE_SM_SC=y
+# CONFIG_NIMBLE_SM_SC_DEBUG_KEYS is not set
+CONFIG_BT_NIMBLE_SM_SC_LVL=0
+# CONFIG_NIMBLE_DEBUG is not set
+CONFIG_NIMBLE_SVC_GAP_DEVICE_NAME="nimble"
+CONFIG_NIMBLE_GAP_DEVICE_NAME_MAX_LEN=31
+CONFIG_NIMBLE_ATT_PREFERRED_MTU=256
+CONFIG_NIMBLE_SVC_GAP_APPEARANCE=0
+CONFIG_BT_NIMBLE_MSYS1_BLOCK_COUNT=12
+CONFIG_BT_NIMBLE_ACL_BUF_COUNT=24
+CONFIG_BT_NIMBLE_ACL_BUF_SIZE=255
+CONFIG_BT_NIMBLE_HCI_EVT_BUF_SIZE=70
+CONFIG_BT_NIMBLE_HCI_EVT_HI_BUF_COUNT=30
+CONFIG_BT_NIMBLE_HCI_EVT_LO_BUF_COUNT=8
+# CONFIG_NIMBLE_HS_FLOW_CTRL is not set
+CONFIG_NIMBLE_RPA_TIMEOUT=900
+# CONFIG_NIMBLE_MESH is not set
+CONFIG_NIMBLE_CRYPTO_STACK_MBEDTLS=y
+# CONFIG_BT_NIMBLE_COEX_PHY_CODED_TX_RX_TLIM_EN is not set
+CONFIG_BT_NIMBLE_COEX_PHY_CODED_TX_RX_TLIM_DIS=y
+CONFIG_SW_COEXIST_ENABLE=y
+CONFIG_ESP32_WIFI_SW_COEXIST_ENABLE=y
+CONFIG_ESP_WIFI_SW_COEXIST_ENABLE=y
 # CONFIG_CAM_CTLR_DVP_CAM_ISR_IRAM_SAFE is not set
 # CONFIG_GPTIMER_ISR_IRAM_SAFE is not set
 # CONFIG_MCPWM_ISR_IRAM_SAFE is not set

sdkconfig.defaults

@@ -0,0 +1,8 @@
+# BLE host transport (NimBLE) + WiFi/ESP-NOW coexistence
+CONFIG_BT_ENABLED=y
+CONFIG_BT_NIMBLE_ENABLED=y
+CONFIG_ESP_COEX_SW_COEXIST_ENABLE=y
+
+# Pin stacks to different cores (WiFi stays on core 0)
+CONFIG_BT_NIMBLE_PINNED_TO_CORE_1=y
+CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_0=y